SAMSUNG HG49AF690 (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD SAMSUNG HG49AF690 (01) PDF MANUAL


PDF Content Summary: LED TV Installation manual Thank you for purchasing Samsung product. To receive more service, please register your product at samsung.com Model Serial No. Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Instruction This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer- controlled system for hotels and other hospitality businesses. Interactive: When the TV is powered-up initially, it sends a command to identify the SBB/STB; if identified, the TV switches to ONLINE mode and full control is through the SBB/STB. If the TV is in ONLINE mode, it stops receiving IR(Samsung remote) commands and acts according to interface protocol. Stand-Alone: If SBB/STB is not identified, the TV should be switched to STAND-ALONE mode with restricted operation. Operational Modes When this TV (in Hotel mode) is operated with a SBB/STB, it is in one of two states : • ONLINE or STAND-ALONE. In the STAND-ALONE state, the TV will act as a Hotel TV, but without active communication. This is to prevent guests from trying to cheat the system by disconnecting the SBB/STB. Power ON Hotel TV Stand-alone Mode Hotel Mode On SBB/STB Online if one success within 10 attempts SBB/STB Online-10 SBB/STB Status- consecutive fails Attempt every 2secs Online Mode Poll Rate 20/sec To set the details for Stand-alone or interactive mode, refer to pages 21-30 (Setting the hotel option data : Stand-alone mode and Interactive mode) • Some operations may be restricted to prevents guests from "cheating" the TV system. • No main menu(Interactive mode) or Channel Menu, Plug & Play in Main Menu (Stand-Alone mode) • Limited Volume and Panel key lock or unlock Still image warning Avoid displaying still images (like jpeg picture files) or still image element (like TV Program logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause uneven wear of screen phosphor, which will affect image quality. To reduce risk of this effect, please follow below recommendations: • Avoid displaying the same TV channel for long periods. • Always try do display any image on full screen, use TV set picture format menu for best possible match. • Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process. • Frequently use all TV features designed to reduce image retention and screen burnout. Refer to the relevant user manual section for details. Securing the Installation Space Keep required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature. • When using a stand or wall-mount, use parts provided by Samsung Electronics only. ‒ Using parts provided by another manufacturer may result in a problem with the product or injuries due to the product falling. • The appearance may differ, depending on the product. Installation with a stand. Installation with a wall-mount. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm Contents • Accessories .................................................................................................................................................................... 4 • Installing the LED TV Stand ....................................................................................................................................... 5 • Assembling the swivel ................................................................................................................................................ 6 • Viewing the Connection Panel................................................................................................................................... 8 • TV Controller ................................................................................................................................................................. 11 • Viewing the Remote Control ...................................................................................................................................... 12 • Connecting the TV with STB (SBB) ............................................................................................................................ 15 • Connecting the Bathroom Speakers ........................................................................................................................ 16 • Connecting the MediaHub HD ................................................................................................................................... 18 • Connecting the RJP (Remote Jack Pack) ................................................................................................................. 19 • Setting the Hotel Option Data ................................................................................................................................... 21 • Installing the Wall Mount ........................................................................................................................................... 46 • Securing the TV to the Wall ........................................................................................................................................ 47 • Anti-theft Kensington Lock ........................................................................................................................................ 47 • Specifications ................................................................................................................................................................ 48 • Dimensions .................................................................................................................................................................... 49 • Licence ........................................................................................................................................................................... 51

English 3

4 English Accessories ✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎ The items’ colour and shapes may vary depending on the model.

• Remote Control & Batteries (AAA x 2) • Samsung Smart Control (sold separately) • Quick Setup Guide • Wall mount Adapter x 4 • Hotel Mount Kit • Power Cord / Data Cable • Owner’s Instructions Safety Guide (Not available in all locations) • Cable Holder

✎ The stand and stand screw may not be included, depending on the model. ✎ The Data Cable may not be included, depending on the SI Vendor. Arrange the cables using the Cable Holder Depending on the location and model. Installing the LED TV Stand The 32” and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right or 90 degrees left and right. Stand Components When installing the stand, use the provided components and parts. A 1 EA B 1 EA C x8 (M4 x L12) Stand Guide Stand Screws 13 When the declination happened, try reassemble it 2 category. ✎ Make sure to assembling stand guide attached on the TV. 23-2 x4 (M4 x L12) x4 A C 1-1 x4 (M4 x L12) B 1-2 1-3 2-1 2-2 2-3 ✎ Place a soft cloth over the table to protect the TV, and then place the TV on the cloth screen-side down. ✎ Insert the Stand Guide into the slot on the bottom of the TV. ✎ Slide and assemble it to the end line in the direction of arrow. ✎ Progress the assembly of screw in the manual’s order. 4 Tight the bottom screw first, and upper screw last. 3-1 C ✎ NOTE • Make sure to distinguish between the front and back of each component when assembling them. • Make sure that at least two persons lift and move the TV. 5 English 6 English Assembling the swivel [ WARNING: If you configure the TV to swivel, you must attach it securely to the floor, a desk, a dresser top, etc. as described in the installation instructions. The 32” and larger LED TVs have swivel stands. You can configure these stands so that the TVs swivel 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right using the BRACKET HOLDER SWIVEL. ¦ 20° Swivel To configure the TV so that it swivels 20° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 20°. Then, fix the Bracket Holder Swivel to the stand using the three supplied screws as shown below. ¦ 60° Swivel To configure the TV so that it swivels 60° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 60°. Then, fix the Bracket Holder Swivel to the stand using the three supplied screws as shown below. ¦ 90° Swivel To configure the TV so that it swivels 90° left and right, remove the Bracket Holder Swivel, and then screw the three supplied screws into the stand as shown below. ¦ Hotel Mount Kit Bolt + Nut Short Bolt (2EA) Long Bolt (2EA) Nut (2EA) Washer (2EA) TopBottom Affix the stand to a flat surface such as a dresser top, desk top, or entertainment centre as shown. WARNING: To prevent injury, you must attach this TV securely to the floor, a table, a dresser top, etc. with the Hotel Mount Kit as described in these instructions. 7 English 8 English Viewing the Connection Panel 1AUDIO VARIABLE OUT 4 2VOL-CTRL USB (5V 0.5A) 3 (HDD1.0A) / CLONING HDMI (ARC) IN 3 DOOR-EYE $ HP-ID HDMI IN 2 4LAN OUTHDMI IN 1 5LAN 6RJP 7 AUDIO (OPTICAL) DIGITAL OUT 89 0 ! @ # 14 2USB (5V 0.5A) 3 (HDD1.0A) / CLONING HP-ID 4 LAN OUT 5LAN 6RJP 7 89 0 ! @ # $ ✎ Whenever you connect an external device to your TV, make sure that power on the unit is turned off. ✎ When connecting an external device, match the colour of the connection terminal to the cable. 1 VARIABLE AUDIO OUT Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the Variable port (RCA). 2 VOL-CTRL Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOLCTRL port. 3 USB (5V 0.5A), USB (HDD 1.0A) / CLONING ‒ Connector for software upgrades and Media Play, etc. ‒ Service connection. 4 HDMI IN 1, 2, 3(ARC) Connects to the HDMI jack of a device with an HDMI output. ✎ No sound connection is needed for an HDMI-HDMI connection. HDMI connections carry both audio and video. ✎ Use the HDMI IN 1 jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio. 5 LAN Connect to a wired LAN using CAT 7 cable. 6 RJP This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional modules to improve device use and convenience. 7 DIGITAL AUDIO OUT (OPTICAL) Connects to a Digital Audio component. 8 ANT IN (AIR/CABLE) ‒ To view television channels correctly, the TV must receive a signal from one of the following sources: ‒ An outdoor antenna / A cable television system 9 LAN OUT Wired LAN connection port used to connect an external device such as a laptop to connect to the Internet. (However, the TV must be connected to the Internet via wired LAN.) 0 DATA ‒ Used to support data communication between the TV and the SBB. ‒ Connects using RJ-12 TV type plugs. ! HEADPHONE JACK Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the sound from the built-in speakers is disabled. @ HP-ID Connect the cable to HP-ID and Headphone Jack simultaneously and connect it to separated Headphone Box. See page 17. When connecting Headphone to Headphone Box, it works same as Headphone function. # COMPONENT / AV IN ‒ Connect audio cables to "[L-AUDIO-R]" on your TV and the other ends to corresponding audio out jacks on an A/V device. ‒ Connect RCA audio cables (optional) to "[L-AUDIO-R]" on the rear of the TV set and the other ends to corresponding audio out jacks on the external device. ‒ When connecting to AV IN, the colour of the AV IN [Y/VIDEO] jack (Green) does not match the colour of the video cable (Yellow). $ DOOR-EYE It's a feature that outputs installed camera image in TV during the scheduled time if bell is pressed. 9 English Display Modes You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the resolution you choose. After connecting a computer to the TV, set the screen resolution for the TV on the computer. The optimal resolution is 1920 x 1080 @ 60 Hz. If it is set to any other than in the table below, the TV may display nothing. Set the resolution properly, referring to the user guide of the computer or its graphic card. The resolutions in the table are recommended. ✎ Optimal resolution is 1920 x 1080 @ 60 Hz. Mode Resolution Horizontal (KHz) Frequency Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V) IBM 720 x 400 31.469 70.087 28.322 -/+ MAC 640 x 480 832 x 624 1152 x 870 35.000 49.726 68.681 66.667 74.551 75.062 30.240 57.284 100.000 -/- -/- -/- VESA DMT 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1280 x 720 1280 x 800 1280 x 960 1366 x 768 1440 x 900 1600 x 900RB 1680 x 1050 1920 x 1080 31.469 37.861 37.500 37.879 48.077 46.875 48.363 56.476 60.023 67.500 63.981 79.976 45.000 49.702 60.000 47.712 55.935 60.000 65.290 67.500 59.940 72.809 75.000 60.317 72.188 75.000 60.004 70.069 75.029 75.000 60.020 75.025 60.000 59.810 60.000 60.015 59.887 60.000 59.954 60.000 25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 108.000 108.000 135.000 74.250 83.500 108.000 85.500 106.500 108.000 146.250 148.500 -/- -/- -/- +/+ +/+ +/+ -/- -/- +/+ +/+ +/+ +/+ +/+ -/+ +/+ +/+ -/+ +/+ -/+ +/+ ✎ When using an HDMI/DVI cable connection, you must use the HDMI IN 3(ARC) jack. ✎ The interlace mode is not supported. ✎ The set might operate abnormally if a non-standard video format is selected. ✎ Separate and Composite modes are supported. SOG is not supported. 10 English TV Controller TV Controller is a multi directional button that helps navigate without using the remote control. ✎ Some functions which require a PIN code may not be available. ✎ The product colour and shape may vary, depending on the model. ✎ Exits the menu when pressing the controller for more than 1 second. ✎ The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the remote control. Control Menu

: Power off : Channel Up : Channel Down : Volume Up : Volume Down : Source

Press: Move Press & Hold: Select The TV Controller is placed at the bottom of the TV. Standby mode Do not leave your product in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. TV Controller / Remote control sensor 11 English 12 English Viewing the Remote Control ✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons. ✎ Some fuction may not available depending on models. Turns the TV on and off. Display and select available video sources. Directly enter a channel number. Alternately selects Teletext, Double or Mix. MENU HOME CONTENT TOOLS ALARM SUBT. Electronic Programme Guide (EPG) display. Turns the sound on and off. Adjust the volume. Changes the current channel. Display channel list on the screen. Switch to the HOME Screen. Display the main on-screen menu. View the Content Home. Quickly select from frequently used functions. Displays information about the current programme or content. CLOCK: When you press the INFO key Moves the cursor, selects the on- screen menu items, and changes the while in standby mode, the time is displayed on the TV screen. values seen on the TV's menu. Return to the previous menu. Exit the menu. Use these buttons according to the directions on the TV's screen. ALARM: Enter the hour you want the TV to turn on. X: Turns the 3D image on or off. ( Not available ) SUBT.: Displays digital subtitles. Use these buttons with specific features. Use these buttons according to the directions on the TV screen. Turns the TV on and off. Display and select available video sources. Directly enter a channel number. Not available. Returns to the previous channel. Turns the sound on and off. Adjust the volume. Changes the current channel. Display channel list on the screen. Switch to the HOME Screen. Display the main on-screen menu. View the Content Home. Quickly select from frequently used Displays information about the functions. current programme or content. Moves the cursor, selects the on- screen menu items, and changes the values seen on the TV's menu. CLOCK: When you press the INFO key while in standby mode, the time is displayed on the TV screen. Return to the previous menu. Exit the menu. Use these buttons according to the directions on the TV's screen. ALARM: Enter the hour you want the TV to turn on. Use these buttons with specific features. Use these buttons according to the directions on the DUAL: Sound effect selection. TV screen. X: Turn the 3D image on or off. (Not available) PRE-CH CH HOME CONTENT 䯍㽟 CH LIST 虡擖 㰣虝 CLOCK A B C D ALARM DUAL 13 English Installing batteries (Battery size: AAA) 1 2 3 ✎ NOTE • Use the remote control within 7m of the TV. • Bright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs. • The colour and shape may vary depending on the model. • Remote control button 'HOME' & '3D' are not supported. When pressing these buttons, the TV unit does not respond. 14 English Connecting the TV with STB (SBB) ETH MODEM TV Rear Panel Data Cable • Connect the DATA jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable. ✎ Use data communication. • IR signals sent by the remote control to the TV or SBB / STB must meet the following specification to use IR pass through function. IR signal receiver specification ‒ Band pass filter centre frequency: 37.9 kHz ‒ Carrier Frequency, Duty 50% ‒ Minimum Burst Length (tburst): 12 pulses (316 us) ‒ Minimum Gap Time Between the burst (tburst gap): 16 pulses (422 us) ‒ Minimum Gap Time between the data commands (tpause): 25 ms ¦ List of Vendors and Compatible Data Cables Supplied with the TV • Confirm that you are using the correct data cable for your vendor. Refer to the code label on the data cables. 61TV SIDE STB SIDE 1 6 CON A CON B CON A 6: NC 5: IR 4: GND 3: Rx 2: Tx 1: Nc CON A CON BCON B 5 6 4 2 3 5 2 3 ✎ Operation Specification of Data Cable(RJ12) : RS232 1: NC 2: GND 3: Rx 4: NC 5: Tx 6: IR 15 English 16 English Connecting the Bathroom Speakers You can connect the Bathroom Speakers using the following method. ¦ Connecting through the Variable Output (available without an external amplifier) TV Rear Panel 1 Speaker 2VOL+ Volume Control Box VOL- ✎ Availability depends on the specific model. 1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel. Speaker + Speaker - N/C 2. Connect the VOL-CTRL jack of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel. ✎ The maximum speaker output is 4W, 8Ω. ✎ The VARIABLE AUDIO OUT port supports MONO sound out only. • Installing the Volume Control ‒ If you configure the Volume Control Box as shown in the figure, you can control the volume of the bathroom speakers. ‒ The jack that connects the Volume Control Box to the TV is a 3.5mm normal Phone jack. ‒ Volume Control Box switch is a Tact switch. ✎ Setting the Sub AMP Mode ‒ 0: Turns the Sub AMP function off (PWM off). ‒ 1: Determines the Sub volume according to the main volume control. The sub volume is determined according to the Power On Volume, the Min Volume, and the Max Volume values of Hotel Mode. ‒ 2: Determines the volume according to the bathroom control panel setting. • Variable Output Port Specifications ‒ Speaker Wire: Use speaker cable no more than 82 feet (25m) in length. VOL - UP (Black /Red 2) Volume Control Box VOL + 3VOL - VOL - DOWN (White 1) GND (Shield Wire 3) 12 ¦ Audio Loop In An additional Headphone Box can be installed on a bed or business desk for added convenience. The installation procedures are given below. • Detailed Drawing of the Headphone Box. HEADPHON BOX TV Rear Panel Headphone Box

Shield wire <Headphone Box> TV Headphones jack Whitewire (Audio-L) Shield Wire TV HP-ID jack Red Wire (Audio-R) Red wire + White wire 17 English

18 English Connecting the MediaHub HD Output to any external source connected to MediaHub HD on the hotel desk. MediaHub HD Rear TV Rear Panel USB (5V 0.5A) (HDD1.0A) / CLONING 2 HDMI cable LAN 1 RS-232 Data RJP Cable ✎ Availability depends on the specific model. 1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD. 2. Connect the HDMI IN 1, 2 or 3(ARC) port of the TV and the HDMI port of the MediaHub HD. • MediaHub HD ‒ The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB) and corresponding outputs. The corresponding output sources connect from MediaHub to the TV. MediaHub communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an external source to the MediaHub. MediaHub communicates with the TV by sending messages regarding Active/ Inactive sources. The TV switches to the Active external source. ‒ You have to connect the HDMI of the MediaHub to the HDMI IN 3(ARC) port of the TV. ‒ When the TV is on, connect the TV and the RJP within 10 seconds. • Special features ‒ PIP ‒ Auto Detection HDMI USB RS/232 USB (5V 0.5A) (HDD1.0A) / CLONING HP-ID LAN OUT LAN HP-ID LAN OUT

Connecting the RJP (Remote Jack Pack) Output to any external source connected to RJP on the hotel desk. RJP Rear TV Rear Panel USB HDMI VIDEO AUDIO RS/232 HP-ID LAN OUT 4 RS-232 Data Cable 1 Audio Cable USB USB (5V (5V 0.5A) 0.5A) (HDD1.0A) (HDD1.0A) / / CLONING CLONING 3 HDMI cable LAN LAN RJP ✎ Availability depends on the specific model. 1. Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the VIDEO port of the RJP. 2. Connect the AV IN [VIDEO] port of the TV to the VIDEO port of the RJP. 3. Connect the HDMI IN 1, 2 or 3(ARC) port of the TV and the HDMI port of the RJP. 4. Connect the RJP port of the TV and the RS/232 port of the RJP. ✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-7660 (HD Plus). • RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected from RJP to TV. The RJP communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/ Inactive sources. The TV will switch to the Active external source according to the priority set by the User. ✎ You can select HDMI IN 1, 2 or 3(ARC) and AV IN for connecting RJP. ✎ When the TV is on, connect the TV and the RJP within 10 seconds. HP-ID LAN OUT 2 Video Cable 19 English

• The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10 seconds. All LEDs blink 5 times to acknowledge that this has been finished. • The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart. If the guest then touches another source button, the TV will change to the selected source and the corresponding LED will be lit. • After an RJP Reset or a TV Power OFF/ON, it takes approx. 10 seconds to establish communications between the TV and the RJP. • The following table shows the approximate time in seconds to switch from the TV to the input source, based on the priority. ✎ Scenario 1: When no inputs are connected. Source To Connect AV 2 Sec PC 0.7 Sec HDMI 3.9 Sec ✎ Scenario 2: When two or more inputs are connected and an Input source is disconnected and then reconnected. Source Disconnect To Connect Total AV 4.5 Sec 2 Sec 6.5 Sec PC 0.7 Sec 0.7 Sec 1.4 Sec HDMI 3.9 Sec 3.9 Sec 7.8 Sec ✎ E.g. If the RJP has all its live sources AV, PC and HDMI connected, AV is viewed as the highest priority. If the RJP is in HDMI mode, and a guest removes and reconnects the AV, the minimum time required to switch to the AV is 6.5 seconds. • To connect audio (Ipod or Mp3), Music mode should be ON and Jack Ident detect should be OFF. • A/V, PC and HDMI input sources are supported. 20 English Setting the Hotel Option Data To Enter: Press the MUTE → 1 → 1 → 9 → SelectE buttons in order. (From the Hospitality mode, the Standalone mode is set.) To Exit from this menu : power off and turn on again. ✎ Depending on Model and Region, some menus do not exist on the TV set. Hotel TV Function Description Category Item Hospitality Mode Hospitality Mode Select Hospitality Mode. • Interactive mode: TV works with an SI STB or SBB. • Standalone mode: TV works alone, without an SI STB or SBB. SI Vendor SI Vendor • Interactive mode: Samsung / 2M / Locatel / VDA / VDA-S / Acentic / Sustinere / Quadriga / ETV / IBahn / Magilink / Otrum / Siemens / Amino / MDC / Enseo • Standalone mode: OFF / Movielink / Swisscom / Smoovie / SSCP Power On Set the Power On values that will be applied when the TV is turned. • User Defined: Lets you set Power On Channel and Channel Type manually. See Power On Power On Channel Channel and Channel Type below. • Last Saved: If you select this item, when the TV is turned on, it displays the channel it was displaying when it was turned off. Power On Channel Num When the TV is turned on, it switches automatically to this channel. Power On Channel Type • Select channel band: ATV (analog air band), DTV (digital air band), CATV (analog cable band), CDTV (digital cable band), IPTV (Ip Channels). Power On Volume • User Defined: Lets you set the Power On Volume manually. See Power On Volume below. • Last Saved: When the TV is turned on, it returns to the volume that had been set when the power had been turned off. Power On Volume Num The TV turns on with this Volume Level in Stand Alone Hospitality mode. Min Volume The minimum Volume Level the user can set in Stand Alone Hospitality mode. Max Volume The maximum Volume Level the user in Stand Alone Hospitality mode. Power On Source Select the input source the TV displays when turns on. Power On Option Determines the TV's state when power returns after a power failure or after you have unplugged the TV and then plugged it in again. • Last Option: Returns to its last Power state. If it was in Stand-by, it returns to Standby. If it was on, it turns on. • Power ON: When the power returns, the TV turns on. • Standby: When the power returns, the TV enters the Standby mode. 21 English Hotel TV Function Description Category Item Channel Channel Setup Gives you direct, immediate access to some of the Channel menu functions on the user Channel menu such as Auto Program, Antenna selection, etc. Channel Editor The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor you can: • Change the channel numbers and names, manage genre and language groups and delete channels. • Apply the video mute to channels you select. The video mute blanks out the video from a channel and outputs only audio. The Channel Editor also lets you view information about each channel easily, without your having to display each channel directly. Channel Bank Editor Channel Bank Editor edits channels, with 3 different Bank options. Depending on the Bank card, there are specific channels Hotel customers can enjoy. ✎ This function only available when set to Hospitality Mode: Standalone, SI Vendor: Smoovie. Mixed Channel Map This Feature enables showing/browsing all antenna type (Air/Cable) channels at the same time. • ON: When ON, guests can access the complete Channel Map irrespective of the selected antenna type. The Channel list will also populate Air as well Cable type channels. • OFF: When OFF, guest can access the Channel Map corresponding to the selected antenna type [AIR/CABLE or Satellite] only. The Channel list/Editor will only show the selected antenna type channels. Dynamic SI • ON: Check the DTV Programme channel number. (the TV channel editor is inaccessible) • OFF: Do not check the DTV Programme channel number. (the DTV channel editor is accessible, but additional channel Programme number update is not supported) Channel Rescan Message When there is a mismatch between the data in the channel map and the transmitted data, the TV autotunes the channels to restore the data/parameters in the channel map. • ON: When Channel Rescan Message is ON, The OSD showing that the channels are being rescanned will be displayed to Hotel Guests. • OFF: A Hotel Admin can turn the Channel Rescan Message OFF, if the rescan message OSD should not to be displayed to Hotel Guests. Mychannel Enable or disable the My Channel feature. Subtitle Auto On This function turns the function On/Off that automatically turns on the subtitles in a specific location. This function is supported for Hotel TVs that are ready to receive DVB broadcasts that is heading to Europe. This function is related to France’s subtitle specification. The rest of the countries’ subtitles function according to the appropriate location specifications regardless of the Subtitle Auto On function. • ON: When the Subtitle Auto On function is ON, it follows France’s subtitle specifications. • OFF: When the Subtitle Auto On function is OFF, it does not follow France’s subtitle specifications. TTX Widescreen Mode Widen the subtitle section to fit the screen width. 22 English Hotel TV Function Description Category Item Menu OSD Picture Menu Lock Enable or disable the Picture Menu. Menu Display • ON: The Main Menu is displayed. • OFF: The Main Menu is not displayed. Channel Menu Display • OFF: Broadcasting submenu is disable for guest. • ON: Broadcasting subMenu is enable for guest. Panel Button Lock Turning the front panel (local key) operations on/off. • Unlock: Unlocks all panel keys. • Lock: Locks all panel keys. • OnlyPower: Locks all panel keys except the Power panel key. Clock • OFF: No clock option of Factory menu shall work. Only Main menu. • Ext. Clock: When set to Ext. Clock to adjust following options. Clock Type ‒ Time Format: 12 Hour / 24 Hour ‒ Clock Test: Failure / Success ‒ Clock Normal Dim.: 0 ~ 4 ‒ Clock Standby Dim.: 0 ~ 1 Local Time Select the way to update the clock data • Manual: The clock is set automatically from the DTV channel or manually by the user when the TV is in stand-alone mode. • TTX: Bring up the time information from the TTX stream. • Time Channel: The clock is set from the selected channel. ✎ Standalone: Manual / TTX / Time Channel ✎ Interactive: Manual / Auto / TTX / Time Channel Timer Type Enable or disable the alarm function. • WakeUp : Enable the alarm function to turn on the device at the specified time. • OnOff : Disable the alarm function and enable on or off timer. Music Mode Allows music output from an mp3/audio player connected to an AV Input Source on the TV. Music Mode AV When on, you can hear sound from the player through the TV whether there is a video signal or not. Also mutes the video so the TV does not display a picture when a guest is playing music. The TV's backlight, however, remains on. Music Mode Comp Allows music output from an mp3/audio player connected to an Component Input Source on the TV. When on, you can hear sound from the player through the TV whether there is a video signal or not. Also mutes the video so the TV does not display a picture when a guest is playing music. The TV's backlight, however, remains on. Music Mode Backlight When set to Off, the TV's backlight is turned off entirely when a guest uses the Music mode. To save energy, set to Off. 23 English Hotel TV Function Description Category Item Remote Jack Pack Lets you set the priority of the 7610 RJP AV jack. You can choose 1, 2, with 1 being the highest and 2 the lowest. The TV automatically displays the source with the higher priority. For example, Priority AV lets say AV is set to 1 and HDMI is set to 2. If a guest has attached a device to the HDMI jack, and then plugs a device into the AV jack, the TV will automatically switch to the device plugged into the AV jack (the jack with the higher priority). Note that a guest can also switch devices manually by pushing a button on the 7610 RJP. Priority HDMI Lets you set the priority of the 7610 RJP HDMI jack. You can choose 1, 2, with 1 being the highest and 2 the lowest. The TV automatically displays the source with the higher priority. See above for a more detailed explanation. HDMI Option Select which HDMI source of the TV is connected to the RJP jack. (HDMI1/HDMI2/HDMI3) HDMI Music Mode Allows music output from an mp3/audio player connected to an HDMI Input Source. When on, you can hear sound from the player through an HDMI input of the RJP whether there is a video signal or not. (This option is only compatible with the Guest link RJP.) External Source When USB is connected to the TV : USB Pop-up Screen • Default: a popup window appears. • Automatic: This enters the USB content menu automatically. • Disable: Neither the popup window nor the menu appears. External Source Banner If set to On, the TV displays the External Source Banner (information) when you change the TV source to another external input, press the Info key, or turn the TV on. • ON: The External Source information is displayed on the TV screen. • OFF: The External Source information is not displayed on the TV screen. Auto Source • ON: When an external input source is connected to the TV, the TV identifies the input source, and then automatically switches to that input source. • OFF: Auto Source function is Off. Anynet+ Return Source Select especially the useful return for TV source the Guestlink after stopping RJP.) an Anynet+(HDMI-CEC) connection. (This fuction is HP Management • ON: When the Headphone is connect to the TV, allows you to listen to audio through the TV's speakers and the connected headphones simultaneously. But, you can only adjust the HP Mode volumes of TV speaker. • OFF: When the Headphone is connect to the TV, allows you to listen to audio through the connected headphones only. Default HP Volume Configure the values of headphones' volume when HP MODE is set to ON. Main Speaker • ON: Plays the TV sound through the TV speaker. • OFF: Plays the TV sound through the headphones only. 24 English Hotel TV Function Description Category Item Bathroom Speaker Determines the Sub AMP operation mode. • 0: Turns the Sub AMP function off (PWM off). Sub AMP Mode • 1: Determines the Sub volume according to the main volume control. • That is, the sub volume is determined according to the Power On Volume, the Min Volume, and the Max • 2: Determines the volume according to the bathroom control panel setting. Sub AMP Volume Sub AMP Volume level at power on initial condition. Eco Solution Power Saving Mode Adjusts the brightness of the TV to reduce power consumption. • OFF: Turns off the energy saving function. • Low: Sets the TV to low energy saving mode. • Medium: Sets the TV to medium energy saving mode. • High: Sets the TV to high energy saving mode. Logo/ Message Welcome Message Displays a the welcome message for 60 seconds when the TV turns on. Edit Welcome Message Edits the Welcome Message. Hospitality Logo Turns the Hospitality logo feature OFF, BMP, AVI, BOTH. If not OFF, when the TV is turned on, the Logo is displayed, before the signal from the initial source, for the amount of time set in “Logo Display Time”. • The DivX codec is not supported. Hospitality Logo DL Downloads the Hospitality logo. Hospitality logo file requirements: • Image or video files only. • Max file size: AVI - 50 MB / BMP - 10MB • File can only be named "samsung_image.*", "samsung_video.*" Logo Display Time Hospitality Logo Display Time (3/5/7 seconds). Cloning Clone TV to USB Clone the current TV options to a USB memory device. Clone USB to TV Clone the saved TV options on a USB memory device to the TV. Setting Auto Initialize If you set Setting Auto Initialize to On, and the TV's power is turned off and on, TV menu items are restored again to their values cloned initially. 25 English Hotel TV Function Description Category Item Network If this item is entered into, network setup menu is displayed. The network setup menu is used for setting network like access internet. Soft AP: Using this function, you can connect the TV on your mobile devices. Set the options for connection of Wi-Fi device. • Soft AP: Turns on or off the Soft AP. When Soft AP is set to On, your mobile devices can find the TV name in Wi-Fi connection list. • Security key: Set a security key that you need to enter on other devices so they can connect to the TV. Network Setup ‒ Input the generated security key into the device you want to connect. ‒ If network does not operate normally,check the security key again. An incorrect security key may cause a malfunction. ✎ Soft AP may not be available if it is not supported by the model. ✎ Maximum number of devices that can be connected: 4 devices. ✎ Bitrate : 10 Mbps/device. ✎ The specifications above are based on our in-house testing. Actual performance may vary depending on your wired/wireless network environment. Apps ID Setting Set SmartHub Model. Apps Setting Set up SmartHub. Service Discovery Can use this feature to enable Service Discovery Features like DLNA. LAN OUT Enable/disable LAN Out. When enabled, the TV can work as a wired router for other network devices. VLAN ID Create separate VLAN groups. A 3-digit number can be entered between 1 and 255 for the VLAN ID. Solution VLAN ID When VLAN is used, set a VLAN ID to be assigned to a Solution (such as SYNC, H.Browser etc.). Device VLAN ID Set a VLAN ID to be assigned to external devices connected to the LAN OUT port. ARP Interval Adjust the ARP (Address Resolution Protocol) Interval value. ‒ Setting value: 2 / 5 / 10 / 30 / 60 / 120 / 180 sec (default: 60 sec) System Manager System Manager Gives you direct, immediate access to System Manager functions such as such as Time, Language, View Notifications, Device Name. System Manager allow you to Adjust your TV's system and customise settings for your viewing environment. 26 English Hotel TV Function Description Category Item Security Disable entry to Hotel menu. Factory Lock • ON: The password is needed before entering factory menu. • OFF: disable this feature. Password Popup Enable/disable Password Popup. If this option is set to OFF, the TV will not display the password input popup window when entering the Factory menu. If set to ON, the password input popup window appears. Password Input If this option is enabled, a popup input box appears which asks for an 8-character security password. The admin must enter a password before applying or updating security preferences. After the correct password is entered, options such as Password Setting, Password Reset and Security Mode are available. Password Setting User can change the password. Password Reset Password is reset to "00000000". Security Mode Security Mode provides password protected administrative functionality to enable or disable features of Hospitality TV, such as HDMI, USB and TTX. Use this option to turn security mode on or off. After turning on security mode, options such as "USB," "HDMI" and "TTX Security” are automatically enabled in the security sub-menu. “USB to TV cloning” and “TV Reset” will be disabled in the Hospitality Menu. USB Enable/disable USB access. When disabled, access to USB media is blocked. HDMI Enable/disable HDMI access. If disabled, Anynet, HDMI source, HDMI type External Channels will not be accessible to the user. TTX Security If this option is disabled, the TTX feature will not work when the TTX button is pressed on the remote control. DRM DRM Mode Configures DRM support. OFF: Turns off DRM support. LYNK DRM: Select to turn on S-LYNK DRM CAS support only. 27 English Hotel TV Function Description Category Item System Enter Self Diagnosis Menu. • Start Picture Test: Use this test when you experience a problem with your TV's picture. Self Diagnosis for TV • Start Sound Test: Use this test when you experience a problem with your TV's sound. • Signal Information: Show digital broadcasting signal information. • Reset Smart Hub: Reset the Smart Hub and Samsung account settings stored on your TV. • Reset: Restore all TV settings, excluding network settings, to the factory defaults. Self Diagnosis for HTV Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB. If you have any problems with the Pro:idiom encryption channel or the communications with the SI STB or SBB, use this diagnosis function. If "Pro:Idiom DTV Channel Key Loss" appears to have failed and the Pro:Idim encryption channel has failed to play content, first check the broadcasting systems related to Pro:Idiom encryption. If your broadcasting system does not have a problem, contact Samsung Service. If STB SI Vendor Setting appears to have failed and communication with the SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB does not have a problem, contact to Samsung Service. Software Update Lets you upgrade the TV SW with a USB memory stick. Sound Bar Out If the Samsung Sound Bar device is connected to this TV, this item lets you to select where the TV sound is outputted when the TV is turned on. • ON: When the TV is turned on, the TV sound is automatically outputted in the Sound Bar device only. • OFF: When the TV is turned on, the TV sound is automatically outputted in the TV speaker device only. Contact Samsung Display the web site of related Samsung service center, software version, and Mac address information. Standby LED When the TV is in standby mode, you can configure the settings of external LED. • ON: The LED is on. • OFF: The LED is off. TV Reset Returns all settings on the TV to their factory defaults. Home Menu Activate Home Menu standalone solution for user. • ON: Home Menu Enabled. Home Menu Display • OFF: Home Menu Disabled. Home Menu feature is standalone hotel solution which provides quick access to various features such as Alarm, Media Play etc and settings such as Picture Size, Language etc. Home Menu Editor Using this feature you can edit and manage TV feature to be used from Home Menu. Home Menu Auto Start This option allows you to set Home Menu as first screen for user. • ON: Home menu is shown as first screen. • OFF: Do not show Home menu as first screen. 28 English Hotel TV Function Description Category Item REACH Solution REACH RF Mode You can turn on or off the REACH RF Mode. When set to On, the TV can operate with the REACH Server (Modulator) through the RF channel (DTV cable). REACH IP Mode You can turn on or off the REACH IP Mode. When set to On, the TV can operate with the REACH IP Server through the IP network. Server URL Setting You can enter the REACH IP Server's address. (Example: 192.168.1.2:443) REACH Channel This is a DTV Cable Channel PTC Number for receiving REACH Data when the REACH RF Mode is on. The value must be same as the value set on the REACH Server (Modulator). Group ID You can set the TV's Group ID to manage TVs in groups on the REACH Server (Modulator). REACH Update Time You can set the specific time to receive and update REACH Data from the REACH Server (Modulator). (Operates when the AC power cord is plugged in and the power is off.) • OFF: You can turn off the REACH Update Time function. • 1hour: 1 hour after the TV's power is off • 2hour: 2 hours after the TV's power is off • 12:00 am: 12:00 am • 2:00 am: 2:00 am everyday • 12:00 pm: 12:00 pm everyday • 2:00 pm: 2:00 pm everyday REACH Update Immediate When set to On, the TV will receive and update REACH Data from the REACH Server (Modulator) right after the power is off. (Operates when the AC power cord is plugged in and the power is off.) REACH Config Version Displays the TV Configuration Data version received from the REACH Server. H.Browser Solution H.Browser Mode You can turn on or off the H.Browser Mode and run the H.Browser Web App. URL Launcher Setting H.Browser Solution settings menu • Install Web App: Enter the H.Browser Server URL where Web App and sssp_config.xml files are located. • Uninstall: You can delete the installed Web App. • Timeout setting: Set the time out period for connecting th the URL. • Developer Mode: If you used Tizen Studio (SDK) for development, you can connect to the Host PC (which SDK is installed) to use the development tool. 29 English Hotel TV Function Description Category Item HMS HMS Mode You can turn on or off the HMS Mode. When set to On, the TV can operate with the HMS Server through the IP network. HMS Server URL Setting You can enter the HMS Server's address. (Example: 192.168.1.2:8080) HMS Gateway Role When there is one TV per room, set to 'Master'. When there are more than one TVs per room, set the main TV to 'Master' and the others to 'Slave'. HMS HalfTicker Display Set to On if you want to use the HalfTicker UI. When set to Off, the HalfTicker UI will not be displayed. However, all the hot keys (except for Room Control key) on the HMS remote control will work normally without the HalfTicker UI display. Virtual Standby When the AC power cord is plugged in and the power is off, this option maintains the TV's Virtual Standby Mode important features even after the screen is off. When the TV is in Virtual Standby Mode, it consumes about 9.5 W to 17.4 W. Reboot Time After the TV power is off (in Virtual Standby Mode) if there is no input from the user within the set Reboot Time, the TV will reboot and enter Virtual Standby Mode again. Room Number Room Number You can set the room number of the TV's location. ✎ Refer to the manual of each solution for details about functions and settings of the solutions such as REACH, HMS, and H.Browser. ✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets you deliver TV firmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents through RF/IP DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only in standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the REACH server product for more operating information. 30 English ¦ Welcome Message The welcome message is used to display custom messages on the TV every time TV is turned on by a Guest in Hotel room. ‒ Welcome message settings are found in the Hotel Option Menu. ‒ Welcome message should be ON in order to display the message on power-on. Welcome Message ON Edit Welcome Message Hospitality Logo OFF Hospitality Logo DL ... Logo Display Time ... ‒ A welcome message can be up to 25 characters and it can be edited by changing the text in the Hotel Service menu. ‒ The following is the list of characters supported by Welcome message: ✎ Capital letters, from A-Z ‒ Welcome message can be edited by using the navigation, colour & enter key on the Remote in the “Edit Welcome Message” OSD. ‒ Use the directional buttons on the remote control to enter the title and message, and select Save. 31 English ¦ Hotel Logo The Hospitality Logo function displays the Hotel's picture image when the TV is initially powered on. ‒ Hospitality Logo settings are the Hospitality mode menus. ‒ The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on. ‒ If there is a logo image stored in memory and the Hospitality Logo option is on, the Hospitality logo is displayed when the TV is turned on. ‒ The Hospitality logo is not displayed when the Hospitality option is off, even if its image has been loaded on the TV. Welcome Message OFF Edit Welcome Message Hospitality Logo BMP Hospitality Logo DL Logo Display Time 5 Second • Hospitality Logo ‒ This option lets you choose whether the Hospitality Logo image is displayed or not. ‒ Initial value is OFF. ‒ Can be set to OFF or BMP, AVI, BOTH. ‒ When set to BMP, AVI, BOTH, the Logo Download and Logo Time Display menu items become accessible. • Hospitality Logo DL ‒ This option lets you download the logo image to the TV’s memory from a USB device. ‒ A wait message appears while the image is being copied to the TV. ‒ A "Completed" message appears when the copy operation finishes successfully. ‒ The word "Failed" appears if the copy operation was unsuccessful. ‒ No USB appears if no USB device is connected. ‒ No File appears if there is no file to copy on the USB device or the file is in the wrong format must be a BMP file. If No File appears and there is a logo file on the USB device, check the file format. • Logo File Format ‒ The TV supports only BMP and AVI format. ‒ The file name must be samsung.bmp or samsung.avi. ‒ The maximum resolution of the BMP format is 960 x 540. ‒ The maximum file size for AVI format is 30MB. ‒ The TV does not change the size or scale of the image. 32 English ¦ USB Cloning USB Cloning is used to download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV set and upload them to other TV sets. All the user-defined settings from the TV (Master Set) can be copied to the USB device. ✎ After cloning, certain features are applied when the TV is turned on again. • Clone TV to USB: This copies stored data from the TV set to the USB device. 1. Insert a USB drive into the USB port on the rear of the TV. 2. Enter the Interactive menu by pressing buttons in order. • MUTE → 1 → 1 → 9 → ENTER 3. Press the ▲ or ▼ button to select “Clone TV to USB”, then press the ENTER button. 4. When the message “Clone TV to USB” is displayed, press the ENTER button.

5. You can verify USB cloning behavior. • In Progress: during copying data to USB. • Completed: copy was finished successfully. • Failed: copy was not finished successfully. • No USB: USB is not connected. • Clone USB to TV: This to downloads the stored data in the USB device to TV set. 1. Insert a USB drive into the USB port on the rear of the TV. 2. Enter the Interactive menu by pressing buttons in order: MUTE → 1 → 1 → 9 → ENTER 3. Press the ▲ or ▼ button to select “Clone USB to TV”, then press the ENTER button. 4. When the message “Clone USB to TV” is displayed, then press the ENTER button. 5. You can Make sure USB cloning behavior. Clone TV to USB Clone USB to TV Setting Auto Initialize OFF Clone TV to USB Clone USB to TV Setting Auto Initialize OFF • In Progress: copying data to TV. • Completed: copy finished successfully. • Failed: copy did not finish successfully. • No USB: USB is not connected.

• No File: there is no file to copy on the USB. ✎ Activate copying from USB to TV by pressing ENTER key for 5 seconds. ✎ The Hotel TV product family does not support the CLONE function between models that supports the satellite / T2 operation and models that do not. For fast, instant cloning during installation, insert a USB drive with master settings from the first TV and press the Enter key for 5 seconds. Pre-condition for cloning (check point) – Cloning should be done between same model (same version). – Before cloning, all displays should be updated at the latest version (same version). 33 English ¦ Setting Auto Initialize When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture, Sound, Input, Channel, Setup, and Hotel Setup). This lets you set nearly all of the menu values on your hospitality TVs to the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu, they can change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize function to on, the TV automatically restores (initializes) any guest-side menu values to the cloned, standard values when the TV is turned off and then turned on again. Note that Setting Auto Initialize works on cloned guest side menu values only. Settings which have not been cloned are ignored. The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize function to on. Menu Item Picture Picture Mode Picture Size Settings Picture Size Auto Wide 4:3 Screen Size Fit to Screen Zoom and Position Expert Settings Backlight Brightness Contrast Sharpness Color Tint (G/R) Apply Picture Settings Digital Clean View LED Clear Motion Contrast Enhancer Film Mode Color Tone White Balance R-Gain G-Gain 2 Point B-Gain R-Offset G-Offset B-Offset 10 Point Settings 10 Point Interval Red Green Blue Gamma RGB Only Mode Colour Space Settings Colour Space Colour Red Green Blue 34 English Menu Item Sound Sound Output Sound Mode Expert Settings Balance Equalizer HDMI Input Audio Format Digital Output Audio Format Audio Delay Auto Volume Sound Feedback Broadcasting Expert Settings Audio Options Preferred Language Digital Text (MHEG) Teletext Language Settings Primary Teletext Language Secondary Teletext Language Primary Audio Language Secondary Audio Language General Clock Mode Time Zone DST Time Zone GMT DST Language Auto Protection Time External Device Manager Time Clock System Manager Anynet+(HDMI-CEC) Game Mode HDMI Black Level Keyboard Manager Keyboard Language Keyboard Type Eco Solution Energy Saving Mode Motion Lighting Auto Power Off Accessibility Audio Description Audio Description Settings Audio Description Volume High Contrast Enlarge 35 English ¦ Plug & Play Hotel Plug & Play automatically performs Hotel mode selection, location setup, clock setup and picture mode setup. ‒ Hotel Plug & Play is available only one time when power is first turned on. ‒ This is available after first setting up the TV and transferring Clone TV data to a USB drive. ‒ To use next TV, you only need to exit Hotel Plug & Play, connect the USB, then Clone the USB to TV. ‒ Depending on model and region, some menus may not exist.Self Diagnosis for TV Self Diagnosis for HTV SW Update Sound Bar Out OFF If you select Factory Reset, the TV resets all values to their factory defaults and then displays the Hospital Plug & Play Contact Samsung menu. Go to the first Hotel Plug & Play screen below. Standby LED ON TV Reset If you change the location of the Current Location. The TV is automatically turned off and on. Press POWER button to exit. 36 English Region Settings Change the region settings if you are located in North America, Latin America, or Europe. Your TV might not function if the region settings are not correctly configured. When the region settings are changed, your TV will automatically restart to apply them. ED_AFR ED_MYAN ED_MAL ED_UAE ED_M_ASIA2 TV installation Type Select your TV installation type. Basic TV Setup Cloning Mode Factory Menu Welcome to Samsung TV! Select your language to start the on screen setup. Bienvenue! Welcome! Bienvenido! If you select Cloning Mode If you select Factory Menu Use the Up and Down buttons to change the language. Start basic setup to use your TV. Hotel Option Menu appears. Next Next Next Copy the system settings from the USB or server to the TV. End setup and go to Factory Menu directly. Next Previous 2 3 Terr./Cable Signal Detected Select each item and choose the correct setting. Then select Next to search for channels. Select the connected aerial that you want to use to get channels Aerial Terrestrial Channel Type Digital & Analogue Next 1 2 3 Configure your TV Set the basic options to use your TV. Location Others Select the picture mode that best suits your Picture Mode Standard viewing environment. Next Next Previous Scan Channels Scanning for channels... Digital - TV - Radio - Data/Other Analogue Stop2 3 Previous 2 3 Clock Mode Date --/--/---- Time --:-- -- Time Zone Eastern GMT 0 Clock Settings Set the correct time by applying daylight saving time (if required) and setting your local time zone. Auto --:-- Current Time -- Setup Complete! Your TV is now ready to use. Done Next • Region Settings OSD ‒ If you press the right directional button after selecting Change, you can change the location. ‒ If the location is changed, the TV automatically turns off and on. ‒ If you select the incorrect location, execute TV Reset again after entering the System section of the Hotel Menu. • Welcome to Samsung TV! OSD ‒ Initially highlighted: Welcome (English) ‒ If you press the right directional button, the “TV Installation Type” OSD appears • TV Installation Type OSD ‒ Initially highlighted: TV Basic Setup ‒ If you press the right directional button, the “Configure your TV” OSD appears • Configure your TV OSD ‒ Initially highlighted: Others ‒ Select your Location and Picture Mode. ‒ Then select the connected aerial that you want to use to get channels. ‒ After Channel sanning is completed, select Next. • Set Clock Mode, DST (Daylight saving time), and Time Zone OSD ‒ Initially highlighted: Clock Mode : Auto, DST : Off, Time Zone : Eastern ‒ If the TV will be tuned to digital broadcast channels, and these channels transmit date and time information, set the Clock Mode to Auto. The TV will set the date and time automatically. ‒ If the TV will not be tuned to digital broadcast channels, set the Clock Mode to Manual, and then set the date and time on the TV manually. ‒ Set DST On or Off to apply or not apply daylight saving time to the TV. ‒ Select your time zone on the map that appears. 37 English ¦ Multi Code Remocon Multi Code Remocon is a special transmitter which is designed to control each TV with one remote. This is useful where there is more than one TV in a location, such as in a hospital. The set ID number is displayed in the source osd. It is possible to support up to 9 different remote key transmissions for multiple codes. Each TV has an initial code of "0". ‒ The ID code can be set and reset in Analogue TV mode or PC mode. (not available in TTX channel or DTV channel. ‒ ID code can be from 0 to 9. ‒ Press the MUTE button and the RETURN button simultaneously for more than 7 seconds and then select the number button to set the code. ‒ Set ID OSD appears. ‒ The following words appear: “Remote control code is set to X. If you want to change the Remote control code, enter the chosen digit.” X is the digit number. ✎ This OSD displays until Exit is pressed. Remote control code is set to 0. If you want to change the Remote control code, enter the chosen digit. ‒ For example, TV and Remote will be set to ID code #1 if the user presses #1. ‒ The following words appear: “Remote control code is changed to 1” At this point, the TV can be controlled only by the remote with the same ID code as the TV. ‒ TV, the following words will be displayed. “ TV ID x”(x is the TV’s ID) ‒ To reset the ID code, press the MUTE button and the EXIT button simultaneously for more than 7 seconds. When you stop pressing the buttons, the ID code for both the TV and Remote are reset to “0”. “Remote control code is set to 0.” appears. 38 English ¦ Channel Bank Editor (Smovie TV Only) Channel Bank Editor edits channels, with 3 different Bank Options. Depending on the Bank card, there are specific channels Hotel customers can enjoy. Setting the Channel Bank Editor under Stand-alone Mode 1. Enter the Hotel Standalone menu by “MUTE → 1 → 1 → 9 → ENTER” 2. Please select SI vendor : “Smoovie” 3. find the new menu option, “Channel Bank Editor” 4. Enter the “Channel Bank Editor” Hospitality Mode Standalone SI Vendor OFF d SI Vendor Smoovie d Channel d Channel Bank Editor <Depending on model and region, some menu items may not exist> 39 English 5. Edit the channel bank like below example. a. BANK1 (Free channel): Select the channel that will be used when remote doesn’t have any card. b. BANK2 (Family Card - Green): Select the channel that will be used when remote has a GREEN CARD. c. BANK3 (Adult Card - Red): Select the channel that will be used when remote has a RED CARD. References of using SMOOVIE Remote Controller 1. If you select SMOOVIE as the SI Vendor, you should use the SMOOVIE Remote Controller. 2. With the Numeric keys of the remote controller, users can select only the BANK1 channel. To change the channel using the Green or Red Card, please use channel up/down keys. 3. For the Channel guide or the Channel list, users can see only BANK1 channel list. 40 English ¦ Channel Editor Channel Editor edits channel number a and name. Use Channel Editor to sort the channels as user-desired channel numbers. Hospitality Mode Standalone System Manager SI Vendor OFF Security Power On DRM Channel System Menu OSD Home Menu Clock REACH Solution Music Mode H.Browser Solution

Remote Jack Pack HMS External Source Virtual Standby HP Management Room Number ... Bathroom Speaker Eco Solution Logo/Message Cloning Network r Channel Editor

<Depending on model and region, some menu items may not exist> Simple Steps for Editor under Stand-alone Mode Step Broad Outline 1 Operate ‘Channel Auto Store’ in Hotel Option Menu 2 Enter ‘Channel Editor’ in Hotel Option Menu 3 Compile a table related to the final channel lists you want to have 4 Press the EXIT or RETURN Button to exit. 41 English Smovie On sequence Step Smovie TV used ( Air / Cable ) Mixed Channel Map On (Air and Cable both used) Only Air or Cable used Only Air or Cable used If the tv starts with Hotel P&P If P&P already done If the tv starts with Hotel P&P If P&P already done 1 Do the P&P, except channel store Enter Hotel menu Do the P&P all (Air or Cable auto tune) Enter Hotel menu 2 After P&P TV shows hotel menu Setup Mixed Channel Map On After P&P TV will show hotel menu Select channel type - ATV or ADTV for Air - CATV or CDTV for cable 3 Setup Mixed Channel Map On TV power off & on Select channel type - ATV or ADTV for Air - CATV or CDTV for cable Select smoovie TV in Hotel menu 4 Make TV power off & on Enter Hotel menu Select smoovie TV in Hotel menu Select Channel Setup 5 Enter Hotel menu Select smoovie TV in Hotel menu Select "Air" or "Cable" to auto tune 6 Select smoovie TV in Hotel menu Select Channel Setup Select "Air" or "Cable" to auto tune (can be skipped) setup CH Bank Editor 7 Select Channel Setup Select "Air + Cable" to auto tune Setup CH Bank Editor After power off & on, user can use TV 8 Select "Air + Cable" to auto tune Setup CH Bank Editor After power off & on, user can use TV 9 Setup CH Bank Editor After power off & on, user can use TV 10 After power off & on, user can use TV Step Select Channel Setup (can be skipped) Smovie TV used( Satellite ) Mixed Channel Map On (Satellite and Air or Cable both usedused) Only Satellite used If the tv starts with Hotel P&P If P&P already done If the tv starts with Hotel P&P If P&P already done 1 Do the P&P except channel store Enter Hotel menu Do P&P all: Air or Cable auto tune) Enter Hotel menu 2 After P&P TV will show hotel menu Setup Mixed Channel Map after P&P TV shows hotel On menu Select channel type - ATV or ADTV for Air - CATV or CDTV for cable 3 Setup Mixed Channel Map On Make TV power off & on Select channel type - ATV or ADTV for Air - CATV or CDTV for cable Select smoovie TV in Hotel menu 4 Make TV power off & on Enter Hotel menu Select smoovie TV in Hotel menu Select Channel Setup 5 Enter Hotel menu Select smoovie TV in Hotel menu Select Channel Setup (can be skipped) Select Satellite to auto tune 6 Select smoovie TV in Hotel menu Select Channel Setup Select Satellite to auto tune (can be skipped) Setup CH Bank Editor 7 Select Channel Setup Select Satellite to auto tune Setup CH Bank Editor After power off & on, user can use TV 8 Select Satellite to auto tune Setup CH Bank Editor After power off & on, user can use TV 9 Setup CH Bank Editor After power off & on, user can use TV 10 After power off & on, user can use TV 42 English ¦ My Channel Determines the location and genre for the channels provided by the hotel, and if the user selects a location and genre, shows the corresponding channels. • You must select the location first, or you can not set a genre. • If you select the genre without adding any channels, the channel list displays all of the available channels. • My Channel works in Standalone mode only. • SI Vendor in Standalone mode: This does not work if Smoovie is selected. • This is in the Hotel Options in Hotel Menu > Service Mode and can be turned on or off. • The option only works when it is set to on. ¦ Mixed Channel Map Mixed Channel Map is a function to mix Air, Cable and Satellite channels. [ Except for Aus, Singapore, NZ models ] ‒ Mixed Channel Map should be ON in order to mix Air, Cable and Satellite channels. ‒ Use Channel Editor to sort the channels after turning on 'Mixed Channel Map' in Hotel Option Menu. 43 English ¦ Sound Bar • Samsung Sound-Bars and Hospitality TV ‒ Use Samsung Sound-Bars and Hospitality TV that support the ARC feature with HDMI. If you connect a compatible Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to theTV’s sound through the Sound-Bar. ‒ Models supporting the ARC function are listed below: • Sound-Bars: HW-H450/H550/H570/H600/H7500 HW-J450/J470/J550 HW-K450/K550 • Setting the Sound-Bars to Hotel Mode 1. Set the following Hotel menu options: ‒ Hotel option > System > Sound Bar Out = On. ‒ Hotel option > Power On > Power On Volume EN = User Defined. ‒ Hotel option > Power On > Power On Volume > Set greater than 0. ‒ Hotel option > Power On > Max Volume > Set greater than 0. 2. Connect an HDMI cable from the HDMI OUT jack on the back of Sound-Bar to the HDMI3 port (supporting ARC) on the hospitality TV. 3. After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the TV, and then automatically switches to Hotel Mode. Sound Bar Hotel mode functional characteristics: • Power On/Off is synchronized with the TV • HDMI_CEC defaults to On • Functions through the “HDMI OUT” port only • Disables the “Input mode” key on the VFD to prevent unexpected audio-source changes. • Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar’s Power On Volume and Max Volume values, however, are 1⁄2 of the Power On Volume and Max Volume settings in the TV’s Hotel option menu. Example: If the TV’s Power On Volume=20 and Max Volume=90, then the Sound Bar’s Power On Volume=10 and Max Volume=45. *This function may differ depending on the model. 44 English ¦ Security mode Design Specifications • This is to restrict some functions such as TTX and external source (HDMI, USB) input in specific facilities such as a correctional facility. • The Security menu is password-protected. Access to the Security menu is denied without the password. • Security Setting ‒ The Security Setting can be set to ON or OFF. ‒ The default is OFF. ‒ Security Setting: If set to On, external source (HDMI, USB) input and the TTX function will be disabled. • Password Setting ‒ This allows users to change the password. ‒ Users must input the current password, a new password, and confirmation of the new password. • Password Reset ‒ This is to reset the password. ‒ The default password is "00000000". ‒ Password Reset is visible only in the Factory menu by using the key combination of Info and Factory. It is not visible using the key combination of MUTE → 1 → 1 → 9 → ENTER. • Security Setting: If set to On, the SIRCH function is not available. • Factory Reset will not reset the Security Setting. 45 English 46 English Installing the Wall Mount The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. We do not advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the TV on your own. Wall Mount Kit Specifications (VESA) ✎ The Wall mount kit is not supplied but sold separately. Install your wall mount on a solid wall, perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installing on a ceiling or slanted wall, it may fall and result in severe personal injury. ✎ NOTE • Standard dimensions for wall mount kits are shown in the table below. • When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. • Do not use screws that do not comply with VESA standard screw specifications. • Do not use screws longer than the standard dimensions, as they may cause damage to the inside of the TV set. • For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifications. • Do not fasten the screws too tightly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. • Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. • Do not exceed a 15 degrees tilt when mounting this TV. Wall mount Adapter Wall mount bracket TVWall mount Adapter Wall mount bracket TV inches VESA Spec. (A * B) C (mm) Standard Screw Quantity 43 ~ 49 200 x 200 43 ~ 45 M8 4 55 400 x 400 Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock. CC Securing the TV to the Wall Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows. To avoid the TV from falling 1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall. ✎ You may need additional material, such as an anchor, depending on the type of wall. ✎ Since the necessary clamps, screws, and string are not supplied, please purchase these additionally. 2. Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again. ✎ Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications. 3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly. ✎ NOTE • Install the TV near to the wall so that it does not fall backwards. • It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV. • Untie the string before moving the TV. 4. Verify that all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer. Anti-theft Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration, depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. To lock the product, follow these steps: Please find the “K” icon on the rear of the TV. A kensington slot is beside the “K” icon. 1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair. 1 <Optional>

2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable. 3. Insert the locking device into the Kensington slot on the product (1). 4. Lock the lock. ✎ These are general instructions. For exact instructions, see the User manual supplied with the locking device. ✎ The locking device has to be purchased separately. ✎ The location of the Kensington Lock may be different depending on the model. 47 English

48 English Specifications Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity 10°C to 40°C (50°F to 104°F) 10% to 80%, non-condensing -20°C to 45°C (-4°F to 113°F) 5% to 95%, non-condensing

Model Name HG43AF690 HG49AF690 Display Resolution 1920 x 1080 1920 x 1080 Stand Swivel 20 ̊ / 60 ̊ / 90 ̊ 20 ̊ / 60 ̊ / 90 ̊ Screen Size (Diagonal) 108 cm 123 cm Sound (Output) 20 W (L:10 W, R:10 W) 20 W (L:10 W, R:10 W)

Dimensions (WxHxD) Body With stand 972.9 x 570.1 x 54.0 mm 972.9 x 623.0 x 226.5 mm 1105.8 x 645.0 x 54.6 mm 1105.8 x 698.0 x 226.5 mm 1105.8 x 645.0 x 54.6 mm 1105.8 x 698.0 x 226.5 mm Weight Without Stand With Stand 9.7 kg 12.7 kg 13.0 kg 16.0 kg 13.0 kg 16.0 kg

Model Name HG55AF690 Display Resolution 1920 x 1080 Stand Swivel 20 ̊ / 60 ̊ / 90 ̊ Screen Size (Diagonal) 138 cm Sound (Output) 20 W (L:10 W, R:10 W)

Dimensions (WxHxD) Body With stand 1241.6 x 721.4 x 54.5 mm 1241.6 x 774.3 x 226.5 mm Weight Without Stand With Stand 16.2 kg 19.2 kg

✎ Design and specifications are subject to change without prior notice. ✎ For power supply and power consumption information, refer to the label attached to the product.

Dimensions Front view / Side view 124 73 5 6 8 (Unit: mm)

1 2 3 4 5 6 7 8 HG43AF690 972.9 943.9 532.1 559.6 570.1 623.0 54.0 226.5 HG49AF690 1105.8 1076.8 607.0 559.6 645.0 698.0 54.6 226.5 HG55AF690 1241.6 1212.6 683.4 559.6 721.4 774.3 54.5 226.5 Jack panel detail / Rear view ✎ Detailed dimensions can be checked at Displaysolutions.samsung.com. 49 English Base Stand detail HG43AF690 / HG49AF690 / HG55AF690 (Unit: mm) 559.6 70.0 135.0 R9.5 R3.75 152.0 226.5 168.7 ✎ NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. 50 English Licence The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Open Source License Notice Open Source used in this product can be found on the following webpage. ( opensource.samsung.com) Open Source Licence Notice is written only English. 51 English Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the Samsung service centre. Country/Area Samsung Service Centre Web Site CHINA 400-810-5858 samsung.com/cn/support HONG KONG 3698 4698 samsung.com/hk/support (Chinese) samsung.com/hk_en/support (English) MACAU 0800 333 1800 7267864 | 1800-SAMSUNG samsung.com/hk/support (Chinese) samsung.com/hk_en/support (English) © 2017 Samsung Electronics Co., Ltd. All rights reserved. HF690-XZ_ZK-ENG-03


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply