ROLAND SYSTEM-500 SYS-555 (01) PDF MANUAL


Post questions, comments, reviews or page errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD ROLAND SYSTEM-500 SYS-555 (01) PDF MANUAL


PDF Content Summary: Owner’s Manual English Copyright © 2018 ROLAND CORPORATION

Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (supplied on a separate sheet). After reading, keep the document(s) where it will be available for immediate reference. About the Manuals The documentation for this unit consists of the following materials. 5 USING THE UNIT SAFELY (separate leaflet)

Read this first. It contains notes that you must observe in order to use the unit correctly. 5 Owner’s Manual (this document) This explains how to make connections, and describes the specifications of the unit. 5 Parameter Guide (English PDF) This explains the various parts of the unit. Download it as described at right. Obtaining the owner’s manual (PDF version) 1. Enter the following URL on your computer. roland.com/support/ 2. On the Support menu, choose “Owner’s Manuals.” 3. Select the name of your product. CV / GATE Input CV stands for “Control Voltage,” an electrical signal (control voltage) that modifies the behavior of an analog synth or Eurorack module. GATE is a trigger signal that controls the beginning and end of an envelope or other control voltage. Installing in a Eurorack Case Use the included screws (4 pcs.) to attach the unit to your Eurorack case at the locations indicated. Using a Eurorack Power Cable By using the included Eurorack power cable, you can operate this unit on the Eurorack’s system power supply (±12 V). RED SIDE 1. Grasp the 16-pin connector of the Eurorack power cable, and insert it into the Eurorack’s power connector so that the red wire is aligned with the -12 V pin. 2. Grasp the 10-pin connector of the Eurorack power cable, and insert it into the unit’s power connector so that the red wire is aligned with the white line on the unit. * Unplug the headphones before turning the power on or off. Due to the characteristics of the circuitry,

CAUTION 7 Keep small items out of the reach of children To prevent accidental ingestion noise might occur at such times. WARNING 7 Electrocution hazard RED SIDE WHITE LINE

of the parts listed below, always keep them out of the reach of small children. 5 Included Parts: Eurorack installation screws * Always turn the Eurorack unit off and unplug the power cord before plugging the Eurorack power cable. * Do not touch the electrical terminals when attaching the Eurorack power cable.

Main Specifications Roland SYSTEM-500 (SYS-555, SYS-505, SYS-531, SYS-510) : Eurorack Modular Model SYS-555 SYS-505 SYS-510 SYS-531

Current Draw 110 mA (+12 V) 85 mA (-12 V) 85 mA (+12 V) 90 mA (-12 V) 75 mA (+12 V) 60 mA (-12 V) 195 mA (+12 V) 165 mA (-12 V)

Power Supply Eurorack power Dimensions80.8 (W) x 128.5 (D) x 57.2 (H) mm 101.3 (W) x 128.5 (D) x 57.2 (H) mm 3-3/16 (W) x 5-1/16 (D) x 2-1/4 (H) inches 4 (W) x 5-1/16 (D) x 2-1/4 (H) inches Weight 201 g 191 g 264 g 274 g 8 oz 7 oz 10 oz 10 oz Accessories Owner’s Manual, Leaflet “USING THE UNIT SAFELY,” Installation screws (4 pcs.), Eurorack power cable * This document explains the speci cations of the product at the time that the document was issued. For the latest information, refer to the Roland website. * 5 1 0 0 0 6 1 8 4 6 - 0 1 *


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply