ROBUS HBLA-75M (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD ROBUS HBLA-75M (01) PDF MANUAL


PDF Content Summary: 75 mm / Aluminum HALF BALL LEVELING ADAPTER HBLA 75M Thank you for choosing Robus The Robus 75 mm Half Ball Leveling Adapter is compatible with Robus Vantage Series 3 and 5 tripods. This adapter lets you mount any 3/8-16 flat-base photo or video head into the Vantage tripod’s 75 mm video bowl and adds a camera levelling function for perfectly level camera angles. Specifications Height 4.5 in. (11.4 cm) Ball Diameter 2.95 in. (75 mm) Handle Length 3.2 in. (8.1 cm) Mount 3/8-16 screw Material CNC machined aluminum Bubble Level Yes Set Screws Yes, 3 Weight 9.3 oz. (264 g)

Overview 1. 3/8-16 mounting screw 2. 75 mm ball 3. Handle 4. Set screws 5. Bubble level 1 23 4 4 5 5

Attaching the Half Ball Adapter 1. Unscrew the handle from the half ball, and place the half ball into the tripod’s video bowl. 2. Screw handle into the half ball from under the video bowl until it’s secure. Mounting and Adjusting Camera Angles 1. Mount a head onto the 3/8-16 screw, and then mount your camera onto the head. 2. To adjust the camera angle, loosen the handle and use the bubble level to ensure your camera is level. 3. Once the camera is level, tighten the handle until secure. Important! Always support your Important! Always support your camera with one hand when loosening the handle. Five-Year Limited Warranty This Robus product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of five (5) years from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function. This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state. To obtain warranty coverage, contact the Robus Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Robus along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense. For more information or to arrange service, visit robussupports.com or call Customer Service at 212-594-2353 . Product warranty provided by the Gradus Group. gradusgroup.com ROBUS TM Robus is a registered trademark of the Gradus Group. © 2020 Gradus Group LLC. All Rights Reserved. A Gradus Group Brand Images are for illustrative purposes only. GG1


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply