Free English RIVACASE VA2120 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD RIVACASE VA2120 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is included in the product package for the RIVACASE VA2120?
The product package contains the following items:
RIVACASE portable battery
User manual
Micro USB cable
What are the technical specifications of the RIVACASE VA2120 portable battery?
| Feature | Specification |
|---|---|
| Model | VA2120 |
| Battery | Li-Polymer 3.7 V 20000 mAh 74 Wh |
| Input | Micro USB DC 5 V 2.1 A Type-C DC 5 V 2.1 A |
| Output | USB1 5 V 2.1 A USB2 5 V 2.1 A |
| Size | 138 x 68 x 28 mm |
How do I charge the RIVACASE VA2120 external battery?
Charge the external battery fully before the first use. Follow these instructions:
Connect the cable to the Micro USB or Type-C input port of the external battery.
Connect the other end of the cable to the power source. You can use a PC, AC charger, or car charger to charge the battery.
It is recommended to use a RIVACASE charger with at least 12 W (2.4 A) output.
The average full charging time is 10-12 hours.
After the RIVACASE battery is fully charged, the 4 LED indicator lights will be constantly on.
Disconnect the cable from the battery when charging is complete.
How do I read the LED indicators on the RIVACASE VA2120?
The LED indicator shows the charge level. Refer to the table below for the status definitions (● = ON, ◐ = BLINK, ○ = OFF):
| LED Status | Power Level |
|---|---|
| ◐ ○ ○ ○ (1 Blink) | 0%-4% |
| ● ○ ○ ○ (1 On) | 5%-25% |
| ● ● ○ ○ (2 On) | 26%-50% |
| ● ● ● ○ (3 On) | 51%-75% |
| ● ● ● ● (4 On) | 76%-100% |
How do I use the RIVACASE VA2120 to charge a mobile device?
Connect the mobile device to the output port of the RIVACASE battery using the cable.
Charging will start automatically.
The indicator will show the remaining charge of the RIVACASE battery.
Disconnect the cable from the battery when charging is complete.
What is the “Smart output” feature on the RIVACASE VA2120?
The RIVACASE VA2120 identifies the connected device and delivers its fastest possible charge.
What safety protections are built into the RIVACASE VA2120?
The device includes the following safety protections:
Over charge protection
Over discharge protection
Short circuit protection
Over current protection
Over Voltage protection
How can I check the remaining charge level of the RIVACASE VA2120?
Press the check button on the device to check the battery charge level.
What safety cautions should be observed when using the RIVACASE VA2120?
Do not open, modify, disassemble, moist, drop, crush or shake the RIVACASE battery.
Do not use the battery under high humidity, high or low temperature, or direct sunlight.
Do not attempt to replace any part of the device.
Operating temperatures are 0°C to 40°C.
Keep away from children.
Do not keep the battery discharged, as it might be damaged.
Improper use may result in product damage, excess heat, toxic fumes, fire or explosion.
Always take used batteries to your local battery recycling center; never dispose of batteries in the garbage.
CLICK HERE TO DOWNLOAD RIVACASE VA2120 (01) PDF DOCUMENT