RICOH GR III R02010 (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD RICOH GR III R02010 (01) PDF MANUAL


PDF Content Summary: Operating Manual The serial number is located on the bottom of the camera. Chapter 1: Introduction Read this chapter before use. This chapter gives you an overview of the RICOH GR III. Chapter 2: Getting Started Read this chapter before using the RICOH GR III for the first time. This chapter explains about basic operations such as turning the camera on, performing shooting, and playing back images. Chapters 3 and Later Read these chapters when you want to learn more about the different camera functions. These chapters explain about shooting and playback functions, as well as how to customize the camera settings and use it with a computer. Model: R02010 Regarding User Registration Thank you for purchasing a RICOH IMAGING product. In order to provide you with the best customer support and service experi- ence for the product you have purchased, we ask you to complete the user registration. Visit the following website to complete the user registration. http://www.ricoh-imaging.com/registration/ Registered users will be notified by e-mail about important customer sup- port information, such as firmware version updates, etc. Introduction This Operating Manual provides information on how to use the shooting and playback functions of this camera and related precautions. Thoroughly read this Operating Manual to make the best use of the functions available with this camera. Be sure to keep this Operating Manual for future reference. It is recommended to update the camera firmware to the latest version before using the camera. For details on the latest firmware version, refer to the following firmware download site. http://www.ricoh-imaging.co.jp/english RICOH IMAGING COMPANY, LTD. Safety precautions Read all safety precautions thoroughly to ensure safe use. Test shots Take test shots to ensure that the camera is working properly be- fore taking pictures on important occasions. Copyright Reproduction or alteration of copyrighted documents, magazines, and other materials, other than for personal, home, or other simi- larly limited purposes, without the consent of the copyright holder, is prohibited. Exemption from liability RICOH IMAGING COMPANY assumes no liability for failure to record or display images as a result of product malfunction. Radio interference Operating this camera in the vicinity of other electronic equipment may adversely affect both the camera and the other device. Inter- ference is particularly likely if the camera is used in close proximity to a radio/TV receiver. In such case, take the following measures. • Keep the camera as far away as possible from the radio/TV re- ceiver. • Reorient the antenna of the radio/TV receiver. • Use a different wall outlet. This publication may not be reproduced in whole or in part without RICOH IMAGING COMPANY’s express written permission. © RICOH IMAGING COMPANY, LTD. 2019 RICOH IMAGING COMPANY reserves the right to change the contents of this manual at any time without prior notice. Every effort has been made to ensure the accuracy of the information in this manual. Should you nevertheless notice any errors or omissions, we would be grateful if you would notify us at the address listed on the back cover of this manual. 1 2 About the Wireless LAN and Bluetooth® Functions • Do not use the camera in a place where electrical products, AV/OA devices, and so on generate magnetic fields and electromagnetic waves. • If the camera is affected by magnetic fields and electromagnetic waves, it may not be able to communicate. • If the camera is used near a TV or a radio, poor reception or TV screen glitch may occur. • If there are multiple wireless LAN access points or Bluetooth® devices near the camera and the same channel is used, search operation may not be executed correctly. • The security of your data stored, sent, or received is your own responsibility. In the frequency band used by the camera, along with industrial, scientific, and medical devices such as micro- wave ovens, premises radio stations (wireless stations requiring license) and specified low power radio stations (wireless stations not requiring license) for mobile object identification used in factory production lines, etc., and amateur radio stations (wireless stations requiring license) are operated. 1. Before using the camera, confirm that premises radio stations and specified low power radio stations for mobile object identification and amateur radio stations are not operated in the vicinity. 2. In the event that the camera causes harmful radio wave interference to premises radio stations for mobile object identification, immediately change the frequency being used to avoid interference. 3. If you have other troubles such that the camera causes harmful radio wave interference to specified low power radio stations for mobile object identification or to amateur radio stations, contact your nearest service center. This camera conforms to the technical standards under the Radio Law and Telecommunications Business Law and the certification of conformance to technical standards can be displayed on the monitor. Displaying the Certification Marks ----------------------------------------------------------------------------------------------------------------- 1 Display the menu. Refer to “Setting from the Menus” (p.25) for how to display the menu. 2 Select [Certification Marks] in the E8 menu. Trademarks • Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States of America and other countries. • Mac, macOS, OS X, and App Store are trademarks of Apple Inc., registered in the U.S. and other countries. • IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. • Adobe, the Adobe logo, and Adobe Reader are registered trademarks or trademarks of Adobe Systems Incorpo- rated in the United States and/or other countries. • This product includes DNG technology under license by Adobe Systems Incorporated. • The DNG logo is either a registered trademark or trademark of Adobe Systems Incorporated in the United States and/or other countries. • SDXC Logo is a trademark of SD-3C, LLC. • Google, Google Play, and Android are trademarks or registered trademarks of Google Inc. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Ricoh Company, Ltd. is under license. • USB Type-C is a trademark of USB Implementers Forum. • DisplayPort is a trademark owned by the Video Electronics Standards Association in the United States and other countries. • HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and/or other countries. All other trademarks are the property of their respective owners. • This product uses the RICOH RT font designed by Ricoh Company Ltd. AVC Patent Portfolio License This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC standard (“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, L.L.C. See http://www.mpegla.com. Announcement about the Open Source Software This product includes the open source software (OSS) licensed under the GNU General Public License (GPL), GNU Lesser General Public License (LGPL), and/or other licenses. The information about licenses of each OSS used in this product is saved in the product internal memory as a text file. Connect this product to a computer, access the “oss_license” folder in the “Software License” folder, and open the text file to read the license terms. The source codes of OSS used in this product are disclosed under the license terms of GPL, LGPL, etc. If you need the source codes, access the following URL. http://www.ricoh-imaging.co.jp/english/products/oss/ 3 4 Safety Precautions Warning Symbols Various symbols are used throughout this Operating Manual and on the product to prevent physical harm to you or other people and damage to property. The symbols and their meanings are explained below. Danger This symbol indicates matters that may lead to imminent risk of death or serious injury if ignored or incorrectly handled. Warning This symbol indicates matters that may lead to death or serious injury if ignored or incorrectly handled. Caution This symbol indicates matters that may lead to injury or physical damage if ignored or incorrectly handled. Meaning of Symbols The symbol alerts you to actions that must be performed. The symbol alerts you to prohibited actions. The symbol may be combined with other symbols to indicate that a spe- cific action is prohibited. Example: : Do not touch : Do not disassemble Observe the following precautions to ensure safe use of this camera. Danger Q. Do not attempt to disassemble, repair, or alter the camera yourself. The high-voltage circuitry in the equipment poses significant electrical hazard. Q. Do not attempt to disassemble, alter, or directly solder the battery. Q. Do not put the battery in a fire, attempt to heat it, use or leave it in a high temperature environment such as next to a fire or inside a car. Do not put it into water or the sea or allow it to get wet. Q. Do not attempt to pierce, hit, compress, drop, or subject the battery to any other severe impact or force. Q. Do not use a battery that is significantly damaged or deformed. Q. Do not connect the positive (+) and negative (-) poles of the battery with a wire or other metallic item. Also, do not carry or store together with metal objects such as ballpoint pens and necklaces. Q. Use the camera or battery charger BJ-11 to charge the battery. Do not use the battery with any camera except the cameras compatible with the DB-110. Q. Stop using the camera immediately in the event of abnormalities such as smoke, unusual odors, or excessive heat being emitted. Contact your near- est dealer or service center for repair. Q. If the battery fluid leaks and gets into your eyes, immediately wash your eyes thoroughly with tap water or other clean water without rubbing, and seek medical attention immediately. Warning Q. Turn off the power immediately in the event of abnormalities such as smoke or unusual odors being emitted. Remove the battery as soon as possible, being careful to avoid electric shocks or burns. If you are drawing power from a household electrical outlet, be sure to unplug the power plug from the outlet. Failure to observe this precaution could result in fire or electric shocks. Contact the nearest service center at your earliest convenience. Stop using the camera immediately if it is malfunctioning. Q. Turn off the power immediately if any metallic object, water, liquid, or oth- er foreign object gets into the camera. Remove the battery and memory card as soon as possible, being careful to avoid electric shocks or burns. If you are drawing power from a household electrical outlet, be sure to unplug the power plug from the outlet. Failure to observe this precaution could result in fire or electric shocks. Contact the nearest service center at your earliest convenience. Stop using the camera immediately if it is malfunctioning. Q. If the monitor is damaged, avoid any contact with the liquid crystal inside it. Follow the appropriate emergency measures below. • SKIN: If any of the liquid crystal gets on your skin, wipe it off and rinse the affected area thoroughly with water, then wash well with soap. • EYES: If it gets in your eyes, wash your eyes with clean water for at least 15 minutes and seek medical advice immediately. • INGESTION: If any of the liquid crystal is ingested, rinse the mouth out thoroughly with water. Have the person drink a large amount of water and induce vomiting. Seek medical assistance immediately. 5 6 Q. Follow these precautions to prevent the battery from leaking, overheat- ing, igniting, or exploding. • Do not use a battery other than those specifically recommended for the camera. • Do not carry or store the battery together with metal objects such as ball- point pens, necklaces, coins, and hairpins. • Do not put the battery into a microwave or high pressure container. • If leakage of battery fluid, a strange odor, color change, etc. is noticed dur- ing use or during charging, remove the battery from the camera or battery charger immediately and keep it away from fire. Q. Observe the following in order to prevent fire, electrical shock, or cracking of the battery while charging. • Use only the indicated power supply voltage. Also avoid the use of multi- socket adapters and extension cords. • Do not damage, bundle, or alter power cords. Also, do not place heavy objects on, stretch, or bend power cords. • Do not connect or disconnect the power plug with wet hands. Always grip the plug section when disconnecting a power plug. Do not cover the cam- era while charging the battery. Q. Keep the battery and memory card used in the camera out of the reach of children to prevent accidental swallowing. The battery and memory card are harmful if swallowed. Seek medical assistance immediately. Q. Keep the camera out of the reach of children. For children, accidents may occur because they cannot understand the contents of “Safety Precau- tions” and “Precautions for Use”. Q. Do not touch the internal components of the camera if they become ex- posed as a result of being dropped or damaged. The high-voltage circuitry in the equipment could lead to electric shocks. Remove the battery as soon as possible, being careful to avoid electric shocks or burns. Take the camera to your nearest dealer or service center if it is damaged. Q. Do not use the camera in wet areas such as a kitchen. Failure to observe this precaution could result in fire or electric shocks. Q. Do not use the camera near flammable gases, gasoline, benzine, thinner, or similar substances. Failure to observe this precaution could result in an explosion, fire, or burns. Q. Do not use the camera in a location where usage is restricted or prohib- ited, such as on airplanes. Failure to observe this precaution could result in an accident. Q. Wipe off any dust that accumulates on the power plug. Failure to observe this precaution could result in fire. Q. When using a household power outlet, always use the dedicated AC adapter. Failure to observe this precaution could result in fire, electric shocks, or product malfunction. Q. Do not use the battery charger or AC adapter with commercially available electronic transformers when traveling abroad. Failure to observe this pre- caution could result in fire, electric shocks, or product malfunction. Q. Use only the indicated power supply voltage. Failure to observe this pre- caution could result in fire or electric shocks. Q. Do not damage, bundle, or alter power cords. Also, to avoid damaging power cords and the risk of fire or electric shocks, do not place heavy ob- jects on, stretch, or bend power cords. Q. Do not connect or disconnect the power plug with wet hands. Failure to observe this precaution could result in electric shocks. Q. Always grip the plug section when disconnecting a power plug. Do not pull the power cord. This can damage the power cord and result in fire or electric shocks. Q. If any metallic object, water, liquid, or other foreign object gets into the camera, immediately remove the power plug from the outlet and contact a service center for repair. Failure to observe this precaution could result in fire or electric shocks. Q. If an abnormality such as an unusual sound or smoke is emitted from the camera, immediately remove the power plug from the outlet and contact your nearest dealer or service center for repair. Stop using the camera im- mediately if it is malfunctioning. Q. Do not attempt to disassemble the camera yourself. The high-voltage cir- cuitry in the equipment could lead to electric shocks. Q. Do not use the camera in a bathroom. Failure to observe this precaution could result in fire or electric shocks. Q. Do not touch the power plug during a lightning storm. Failure to observe this precaution could result in electric shocks. Q. Keep the battery out of the reach of children. Q. If the battery does not finish charging after the prescribed charging time, discontinue charging. Q. Do not put the battery into a microwave or high pressure container. Q. If the battery leaks or emits an unusual odor, immediately move it away from any sources of fire. 7 8 Caution Q. Contact with fluid leaking from a battery can lead to burns. If part of your body comes in contact with a damaged battery, rinse the area with water immediately. (Do not use soap.) If a battery starts to leak, remove it immediately from the camera and wipe the battery chamber thoroughly before replacing it with a new battery. Q. Plug the power plug securely into the electrical outlets. Failure to observe this precaution could result in fire. Q. Do not allow the camera to get wet. In addition, do not operate it with wet hands. Failure to observe this precaution could result in electric shocks. Q. Do not fire the flash at drivers of vehicles, as this may cause the driver to lose control and result in a traffic accident. Failure to observe this precau- tion could result in a traffic accident. Q. Remove the power plug from the outlets before cleaning the camera. Q. Remove the power plug from the outlets when the camera is not used. Q. Do not cover the camera while using it. Failure to observe this precaution could result in fire. Q. Do not short the terminals or metal contacts on the power cords. Failure to observe this precaution could result in fire. Q. Do not use the camera in wet areas or areas subject to oil smoke such as a kitchen. Failure to observe this precaution could result in fire or electric shocks.

Safety Precautions for Accessories When using optional products, carefully read the user’s manuals pro- vided with the product before using that product. Contents Introduction ........................................................................................................................... 1 Safety Precautions ................................................................................................................ 4 1 Introduction 13 Checking the Contents of the Package ......................................................................13 Names and Functions of the Working Parts ..............................................................14 Operating Controls ........................................................................................................................... 16 Indicators on the Monitor ................................................................................................18 Shooting Screen ................................................................................................................................. 18 Playback Screen ................................................................................................................................. 19 Changing the Screen Display ........................................................................................................ 20 Using the Touch Panel...................................................................................................................... 21 How to Change Function Settings ...............................................................................22 Using the Button/Lever ................................................................................................................... 22 Setting from the Menus .................................................................................................................. 25 Menu List ............................................................................................................................... 27 A Still Image Settings Menus ..................................................................................................... 27 B Movie Settings Menus .............................................................................................................. 30 C Playback Settings Menus......................................................................................................... 32 D Customize Settings Menus ..................................................................................................... 33 E Setup Menus ................................................................................................................................ 35 2 Getting Started 37 Setting the Battery and a Memory Card ....................................................................37 Inserting the Battery and a Memory Card ................................................................................ 37 Charging the Battery ........................................................................................................................ 38 Initial Settings ...................................................................................................................... 40 Turning the Camera On ................................................................................................................... 40 Setting the Language and the Date and Time ........................................................................ 41 Formatting a Memory Card ............................................................................................................ 42 Basic Shooting Operation ................................................................................................44 Shooting in the Program Mode ....................................................................................................44 Viewing the Captured Images....................................................................................................... 46 3 Taking Pictures 48 Taking Still Images .............................................................................................................48 Setting the Exposure Mode ........................................................................................................... 48 Using Exposure Compensation .................................................................................................... 53 Recording Movies ...............................................................................................................54 Playing Back Movies ......................................................................................................................... 56 9

10 Setting the Focus ................................................................................................................57 Setting the Focus Mode .................................................................................................................. 57 Shooting Close-ups (Macro) .......................................................................................................... 61 Shooting with a Single Press of the Shutter Release Button (Full Press Snap) ............62 Setting the Exposure .........................................................................................................63 Selecting a Metering Method ....................................................................................................... 63 Setting the ISO Sensitivity .............................................................................................................. 64 Using a Flash ........................................................................................................................................ 65 Reducing Noise .................................................................................................................................. 67 Setting the White Balance ............................................................................................... 69 Setting the White Balance Manually ........................................................................................... 72 Setting the Color Temperature ..................................................................................................... 73 Setting the Drive Mode ....................................................................................................74 Shooting Continuously (Continuous Shooting) ..................................................................... 75 Shooting with Varied Exposure Values (Bracketing) ............................................................. 76 Shooting While Merging Images Together (Multi-exposure) ............................................ 77 Shooting Automatically at Set Intervals (Interval Shooting) ............................................. 79 Recording Star Trails (Interval Composite) ............................................................................... 81 Using the Self-timer .......................................................................................................................... 83 Configuring the Capture Settings ................................................................................84 Image Capture Settings ................................................................................................................... 84 Movie Capture Settings ................................................................................................................... 85 Setting the Image Finishing Tone and Correction ..................................................86 Using the ND Filter ............................................................................................................................ 86 Reducing Moiré (AA Filter Simulator) .........................................................................................86 Setting the Image Atmosphere (Image Control)....................................................................87 Correcting the Peripheral Illumination ...................................................................................... 89 Correcting a Range of Tones (D-Range Correction) .............................................................. 89 Reducing Blurring of Images ......................................................................................................... 90 4 Playback Functions 91 Using the Playback Functions ........................................................................................91 Changing the Playback Method ....................................................................................92 Displaying Multiple Images ........................................................................................................... 92 Displaying Rotated Images ............................................................................................................ 94 Connecting the Camera to an AV Device ..................................................................................95 Organizing Files ...................................................................................................................96 Deleting Files ....................................................................................................................................... 96 Protecting Images from Deletion ................................................................................................ 97 Copying Images and Movies in the Internal Memory to a Memory Card .....................98 Transferring Images .......................................................................................................................... 99 Editing and Processing Images ...................................................................................100 Developing RAW Images ..............................................................................................................100 Changing the Image Size ..............................................................................................................102 Correcting Highlight/Shadow Areas (Levels Adjustment) ................................................103 Correcting the White Balance .....................................................................................................105 Correcting Color Moiré ..................................................................................................................106 Adjusting the Image Quality .......................................................................................................107 Editing Movies ..................................................................................................................................108 5 Sharing Images 110 Using the Camera with a Computer ..........................................................................110 Using the Camera with a Communication Device................................................111 Connecting to a Communication Device via Bluetooth® ..................................................112 Enabling the Wireless LAN Function .........................................................................................114 Operating the Camera with a Communication Device ......................................................116 6 Changing the Settings 117 Saving Frequently Used Settings ................................................................................117 Saving the Settings .........................................................................................................................117 Assigning Settings to the Mode Dial ........................................................................................119 Using the Saved User Mode .........................................................................................................120 Customizing the Button Functions ............................................................................121 Registering Functions to the ADJ. Mode .................................................................................121 Changing the Functions of the Fn Button ..............................................................................123 Setting the Function of the Shutter Release Button ...........................................................125 Display and Sound Settings ..........................................................................................126 Setting the Information Displayed During Shooting/Playback ......................................126 Setting the Instant Review Display ...........................................................................................127 Setting the Live View Display ......................................................................................................128 Setting the Brightness and Tone of the Monitor ..................................................................128 Setting the Lamp .............................................................................................................................129 Setting the Sound Effects .............................................................................................................130 Power Saving Settings ....................................................................................................131 Automatically Turning the Power Off .......................................................................................131 Dimming the Display......................................................................................................................132 File Management Settings ............................................................................................133 Specifying the Folder/File Settings ...........................................................................................133 Setting the Copyright Information ............................................................................................138 11 12 7 Appendix 139 Attaching Optional Accessories ..................................................................................139 Conversion Lens/Lens Adapter ...................................................................................................139 AC Adapter .........................................................................................................................................140 Troubleshooting ...............................................................................................................141 Power Supply ....................................................................................................................................141 Shooting .............................................................................................................................................142 Playback/Deletion ...........................................................................................................................144 Others ..................................................................................................................................................145 Error Messages ..................................................................................................................................145 Main Specifications ..........................................................................................................147 Camera ................................................................................................................................................147 USB Power Adapter AC-U1/AC-U2 .............................................................................................150 Rechargeable Battery DB-110 .....................................................................................................150 Image Storage Capacity ................................................................................................................151 Operating Environment ................................................................................................................152 Using the Camera Abroad .............................................................................................153 Precautions for Use ..........................................................................................................154 Camera Care and Storage ..............................................................................................156 Warranty Policy..................................................................................................................157 Regulatory Compliance Statements ..........................................................................158 Index......................................................................................................................................164

Introduction Checking the Contents of the Package Before using your digital camera, confirm that the package contains the items listed below. 113 Power plug ■ Operating Manual (this manual) 113 113 RICOH GR III Hot shoe cover (Installed on the cam- era) Rechargeable battery (DB-110) USB power adapter (AC-U1 or AC-U2)* * Differs depend- USB power adapter (AC-U1 or AC-U2)* * Differs depend- USB power adapter (AC-U1 or AC-U2)* * Differs depend- ing on the region. ■ USB cable (I-USB166) ■ Hand strap 113 113 113 113 114 Names and Functions of the Working Parts AF assist light/ self-timer lamp Hot shoe Microphone Microphone Lens Lens Strap eyelet Status lamp Strap eyelet Monitor Terminal cover USB terminal (USB Type-C)

Power button lamp

Speaker Strap eyelet Ring cap Tripod screw hole Battery/card cover Release lever 115 115

116 Operating Controls This section explains about operating controls. The icons in parentheses are used in the descriptions of this manual. 1 2 3 4 5 6 13 141516179 10 11 12 1 Front e-dial (p) Rotate the dial to change values for camera set- tings such as exposure. (p.49) In the playback mode, rotate the dial to mag- nify the image or display multiple images at the same time. (p.46, p.92) 2 Lock button Press to allow the mode dial to be turned. 7 8 3 Mode dial Changes the exposure mode. (p.48) 4 Shutter release button (z) Press to capture images. Press halfway to activate autofocus. (p.44) 5 Power button 11 White balance/Down button (t/b) Turns the power on or off. (p.40) 6 Movie/Wireless button (k/m) Switches between still image mode and movie mode. (p.54) Press and hold to turn the wireless LAN function on and off. (p.115) 7 Fn/Delete button (h/i) Calls assigned function. (p.24) In the playback mode, press to delete images. (p.46) 8 ADJ./EV compensation lever (n/o/q) Press the lever to the left or right to change val- ues for camera settings such as exposure. In the shooting mode, press to switch to ADJ. mode. (p.23) 9 ISO/Left button (u/c) Press to change the ISO sensitivity. (p.64) Moves the cursor to the left when an item is selected. 10 MENU button (f) Displays a menu. Press this button while the menu is displayed to return to the previous screen. (p.25) Displays the white balance setting screen. (p.70) Moves the cursor down when an item is se- lected. 12 DISP button (j) Switches the display between the shooting in- formation and playback information. (p.20) Press and hold this button in shooting mode to magnify the Live View image. (p.45) 13 Playback button (g) Switches between the shooting mode and the playback mode. (p.46) 14 Macro/Up button (s/a) Switches to macro mode. (p.61) Moves the cursor up when an item is selected. 15 Control dial (r) Rotate this dial to change menu items, values for camera settings such as exposure, or images to be displayed on the screen. (p.49) 16 Drive/Right button (v/d) Displays the drive mode setting screen. (p.74) Moves the cursor to the right when an item is selected. 17 OK button (e) Confirms the selected items such as menus. 117 117 117 117 117 117 117 117 117 117

118 Indicators on the Monitor Shooting Screen 1 Drive (p.74) 2 Shake Reduction/Movie SR (p.90) 3 Focus (p.57) 4 White Balance (p.69) 5 Image Control (p.87) 6 AE Metering (p.63) 7 Flash Mode (p.66) 8 GPS positioning status (p.116) 9 Bluetooth® communication (p.112) 10 Wireless LAN communication (p.114) 11 Temperature warning 12 Snap Focus Distance (p.57) 13 File Format/JPEG Recorded Pixels (p.84) 14 Number of storable images 15 Storage location 16 Self-timer (p.83) 17 Grid Guide (p.126) 18 Macro Mode (p.61) 19 Focus bar/Depth of field (p.60) 20 Operation guide 1617 18192021 1 2 3 4 5 6 7 11 1312 10 14 15 2223242526272829 30 31 20 32 34 35 36 37 1.5m 99999 1/400 F5.6 102400 EV-2.0 G1B1 38 39 Press & Hold Still image mode Movie mode 9833 21 Exposure mode (p.48) 22 Full Press Snap (p.62) 23 Crop (p.85) 24 Conversion lens (p.139) 25 ND Filter (p.86) 26 Focus frame (p.44) 27 Electronic Level (p.126) 28 AA Filter Simulator (p.86) 29 Histogram (p.126) 30 Front e-dial 31 Shutter speed (p.49) 32 Aperture value (p.49) 33 Control dial 34 Sensitivity (p.63) 35 ADJ./EV compensation lever 36 Exposure indicator/Exposure compensation (p.53) 37 Battery level (p.19) 38 Recording indicator 39 Recording time/Remaining recording time G1B1 EV-2.0 0:58 1.5m 58 ̋

18 Still image mode Movie mode 1 Shooting date and time 2 Protect (p.97) 3 GPS information (p.116) 4 Bluetooth® communication (p.112) 5 Wireless LAN communication (p.114) 6 File Format/JPEG Recorded Pixels (p.84) 7 Current file/Total files 8 Data source 9 Histogram 10 Folder number/File number (p.133) 11 Image transfer status (p.99) 12 Shutter speed 13 Aperture Value 14 Sensitivity 15 Exposure compensation 16 Battery level 17 Length of time of the recorded movie/ Elapsed time 18 Operation guide Battery Level The icon display changes depending on the battery level. Playback Screen 54 1 2 3 76 8 02/02/2019 10:00 99998 99999/ 9 100-0630 EV+0.7 10 11 12 13 14 15 16 1/2400 F5.6 The battery level is sufficient. The battery level started to drop. The battery level is low. Charge the battery. The camera will turn off soon. There is a problem with the battery. 250 02/02/2019 999-9999 00 ́ 20 ̋ 17 18 10:00 5 9998/9999 119 120 Changing the Screen Display Shooting Mode The information displayed on the shooting screen can be switched. Standard Info. Display Displays all the information. Simplified Info. Display Displays only the information regarding the exposure, AE lock, autofocus frame, and MF operation guide. No Information Display Displays the information only when camera settings are changed. Autofocus frame is displayed during range-finding. Display Off Does not display the autofocus frame and Live View but the information when the camera settings are changed. Memo --------------------------------------------------------------------------------------------------------- • You can specify the displayed information in [Shooting Info. Display] of the D3 menu. (p.126)

You can switch the information displayed on the screen by pressing j. Playback Mode You can switch the screen display among [Standard Info. Display], [Detailed Info. Display], and [No Information Display] in the single image display. Use ab to switch the page in [Detailed Info. Display]. / 02/02/2019 99998 99999 02/02/2019 a 1.5m b02/02/2019 100-0630 1/2400 F5.6 EV+0.7 Memo --------------------------------------------------------------------------------------------------------- • You can specify the displayed information in [Playback Info. Display] of the D3 menu. (p.126) • [Histogram], [Grid Guide], and [Highlight Alert] are not displayed for movies. Using the Touch Panel You can perform operations such as selecting functions and setting the AF point for shooting with the touch panel. When not using the touch panel function, set [LCD Touch Operation] to [Off] in the D2 menu. +0.3 6000x4000 10:00 10:00 00:00 23 ̋ G1A1 0 0 0 0 01 R+200%:G-100%:B-100% 0 0 0 0 102400 1/2400 F5.6 EV+0.7 35.0mm10 99998 / 99999 XXXXXXXXXXX 100-0630 42m N 35° E138° 10:10:01 LCD Touch Operation OnO CancelCancel OKOK 102400 121

122 How to Change Function Settings Using the Direct Keys Quick settings are possible by pressing abcd in the shooting mode. The following functions can be activated. a (s) Macro Mode (p.61) b (t) White Balance (p.69) c (u) ISO Setting (p.63) d (v) Drive Mode (p.74) Memo --------------------------------------------------------------------------------------------------------- • The functions mentioned above can be set from the A menu by pressing f. • The functions assigned to c/d can be changed with [ISO Button] and [Drive Button] of [Fn Button Setting] in the D2 menu. (p.123)

Using the Button/Lever

Using the ADJ. Lever The assigned functions can be easily recalled by pressing n in the shoot- ing mode. 1 Press n in the shooting mode. The mode switches to the ADJ. mode and the icons for the assigned functions appear. 123 • AE Metering (p.63) • File Format (p.84) • Outdoor View Setting (p.129) 3 Use ab to select a setting. When making detailed settings, press h. 4 Press e. The selected function is set and the camera is ready to perform shooting. Memo --------------------------------------------------------------------------------------------------------- • The functions for ADJ. mode can be changed in [ADJ Mode Setting] of the D2 menu. (p.121) • When [Shutter Btn. Confirmation] is set to [On] in the D2 menu, pressing z halfway com- pletes the setting of ADJ. mode. (p.125) OK 123 123 2 Use cd to select a function. By default, the following functions can be selected. • Image Control (p.87) • Focus (p.57) Image Control Vivid 123 123 123 124 Using the Fn Button Memo --------------------------------------------------------------------------------------------------------- • The function of h can be changed in [Fn Button Setting] of the D2 menu. [ISO Button] (c), [Drive Button] (d), and [Movie/Wireless Button] (k) can also be set in [Fn Button Setting]. (p.123) • When the power is turned on or the mode dial is turned, the current function of the button is displayed. If [Guide Display] is set to [Off] in the E2 menu, the function is not displayed. F5.6 400 1/400 AF+AE Lock ISO Setting Drive Mode Still/Movie 100 100

The assigned function can be activated by pressing h in the shooting mode. By default, [AF+AE Lock] is assigned. Setting from the Menus Most functions are set from the menus. 1 Press f. The A1 menu appears. 2 When changing the menu type, press c twice, and then use ab to select a type.A Still Image Settings menus (p.27) B Movie Settings menus (p.30) C Playback Settings menus (p.32) D Customize Settings menus (p.33) E Setup menus (p.35) 3 Press d twice. 4 Use ab to select a function. Each menu type includes 1 to 11 menus. To switch the screen display on a menu-by- menu basis, press c and then ab. Setup Focus Settings Focus Face Detection AF Assist Light Snap Focus Distance Full Press Snap On Focus Peaking AF.C Setting Format Create New Folder Folder Name File Name Sequential Numbering Reset Numbering Copyright Information File Setting Format Create New Folder Folder Name File Name Sequential Numbering Reset Numbering Copyright Information 2.5m R0RICOH R0RICOH 125

126 5 Find a function to set, and press d. The settings for the selected setting item are displayed. 6 Use ab to select a setting, and press e. The screen in Step 4 reappears. Press f to return to the previous screen. When you have finished setting, press f several times to return to previous screens. Memo --------------------------------------------------------------------------------------------------------- • When f is pressed, the last used menu screen appears first. To display the most appropriate menus for the camera settings at that time, set [Store Cursor Position] to [Off] in the E2 menu. • p (front e-dial) or r (control dial) can be turned in place of ab. • The setting is saved even after the power is turned off. Each menu type can be restored to the default settings in [Reset] of the E11 menu. Power Button Lamp Power Button Lamp Reset Reset Select items to reset. Select items to reset. Reset Item Execute Reset OnO OnO CancelCancel OKOK CancelCancel OKOK Indicator Lamps Power Button Lamp OnCount Down On Sound E ects Volume Bluetooth Setting Wireless LAN Setting Smartphone Link 2

Menu List The following menus are available. (The underlined settings and the square- bracketed settings are the default settings.) A Still Image Settings Menus A1 Focus Settings Focus Auto-area AF, Select AF, Pinpoint AF, Tracking AF, Continuous AF, MF, Snap, Z p.57 Face Detection On, Use only in Auto-area AF, Off p.58 AF Assist Light On, Off p.58 Snap Focus Distance 1m, 1.5m, 2m, 2.5m, 5m, Z p.57 Full Press Snap On, Off p.62 Focus Peaking Highlight Edge, Extract Edge, Off p.58 AF.C Setting Focus-priority, FPS-priority p.57 MF Auto Magnification On, Off p.60 A2 Exposure Setting Exposure Mode Program AE, Aperture Priority AE, Shutter Priority AE, Manual Exposure p.120 AE Metering Multi-segment, Center-weighted, Spot, Highlight-weighted p.63 ISO Setting ISO Setting: AUTO, 100 to 102400 ISO Auto Upper Limit: From one setting higher than the lowest ISO sensitivity to the highest ISO sensitivity [6400] ISO Auto Lower Limit: From the lowest ISO sensitivity to one setting lower than the highest ISO sensitivity [100] Minimum Shutter Speed: 1 to 1/1000 sec. [1/30] p.64 Flash Mode Flash Mode: Flash On, Flash On+Red-eye, Slow-speed Sync, Slow Sync+Red-eye Flash Exposure Comp.: -2.0 to +1.0 p.66 Still Image Settings On Focus Face Detection AF Assist Light Snap Focus Distance Full Press Snap Focus Peaking AF.C Setting 2.5m 127

128 Program Line Normal, Max Aperture Priority p.51 ND Filter Auto, On, Off p.86 Auto EV Compensation On, Off p.49 Link AE and AF Point On, Off p.63 A3 White Balance Settings White Balance Auto White Balance, Multi Auto White Balance, Daylight, Shade, Cloudy, Fl. - Daylight Color, Fl. - Daylight White, Fl. - Cool White, Fl. - Warm White, Tungsten, CTE, Manual White Balance, Color Temperature p.69 WB Fine-tuning On, Off p.71 AWB in Tungsten Light High, Low p.71 A4 Shooting Settings Still/Movie Still Image, Movie p.54 Macro Mode On, Off p.61 Drive Mode Drive: Single Frame Shooting, Continuous Shooting, Bracket- ing, Multi-exposure, Interval Shooting, Interval Composite Self-timer: 10sec., 2sec., Off p.74 AA Filter Simulator High, Low, Off p.86 A5 Image Capture Settings File Format JPEG, RAW, RAW+JPEG p.84 Aspect Ratio 3:2, 1:1 Crop 35mm, 50mm, Off JPEG Recorded Pixels L, M, S, XS Color Space sRGB, AdobeRGB A6 Image Process Settings Image Control Standard, Vivid, Monotone, Soft Monotone, Hard Monotone, Hi-Contrast B&W, Positive Film, Bleach Bypass, Retro, HDR Tone, Custom1, Custom2 p.87 Peripheral Illumin. Corr. On, Off p.89 D-Range Correction Highlight Correction: Auto, On, Off Shadow Correction: Auto, Low, Medium, High, Off p.84 Noise Reduction Slow Shutter Speed NR: Auto, On, Off High-ISO Noise Reduction: Auto, Low, Medium, High, Custom, Off p.63

A7 Shooting Assist Shake Reduction On, Off p.90 Auto SR Off Enable Auto SR Off, Disable Auto SR Off p.90 129 130 B Movie Settings Menus B1 Focus Settings Focus AF, MF, Snap, Z p.57 Snap Focus Distance 1m, 1.5m, 2m, 2.5m, 5m, Z p.57 Focus Peaking Highlight Edge, Extract Edge, Off p.58 MF Auto Magnification On, Off p.60 B2 Exposure Setting AE Metering Multi-segment, Center-weighted, Spot, Highlight-weighted p.63 ND Filter On, Off p.86 B3 White Balance Settings White Balance Auto White Balance, Daylight, Shade, Cloudy, Fl. - Daylight Color, Fl. - Daylight White, Fl. - Cool White, Fl. - Warm White, Tungsten, CTE, Manual White Balance, Color Temperature p.69 WB Fine-tuning On, Off p.71 AWB in Tungsten Light High, Low p.71 B4 Shooting Settings Still/Movie Still Image, Movie p.54 Macro Mode On, Off p.61 B5 Movie Capture Settings Framerate 60p, 30p, 24p p.85 Sound Recording On, Off Movie Settings Focus Snap Focus Distance Focus Peaking MF Auto Magnification AE Metering ND Filter White Balance 2.5m O B6 Image Process Settings Image Control Standard, Vivid, Monotone, Hard Monotone, Hi-Contrast B&W, Positive Film, Bleach Bypass, Retro, Custom1, Custom2 p.87 Peripheral Illumin. Corr. On, Off p.89 D-Range Correction Highlight Correction: Auto, Off Shadow Correction: Auto, Low, Medium, High, Off p.84 B7 Shooting Assist Movie SR On, Off p.90 131 132 C Playback Settings Menus C1 File Management Delete Delete 1 Image, Delete All Images p.96 Protect Protect 1 Image, Protect All Images p.97 Image Rotation 90° (counterclockwise), 180°, 90° (clockwise) p.94 Image Copy — p.98 File Transfer Transfer 1 Image p.99 C2 Image Edit RAW Development JPEG Recorded Pixels, Aspect Ratio, Color Space, White Bal- ance, Image Control, Peripheral Illumin. Corr., Sensitivity, High-ISO Noise Reduction, Shadow Correction p.100 Resize — p.102 Cropping — p.102 Levels Adjustment — p.103 WB Adjustment — p.105 Color Moiré Correction Low, Medium, High p.106 Base Parameter Adj Brightness, Saturation, Hue, Contrast, Sharpness p.107 Movie Edit Cut, Divide p.108 C3 Playback Settings Auto Image Rotation On, Off p.94 Playback Order Options File No., Shooting Date/Time p.92 Playback Sound Volume 0 to 20 [10] p.56 Playback Settings Delete Protect Image Rotation Image Copy File Transfer RAW Development Resize D Customize Settings Menus D1 User Mode Save Settings — p.117 Rename — p.118 Recall — p.119 Delete Settings — p.118 D2 Customize Controls M Mode Dial Setting Custom1, Custom2 p.52 ADJ Mode Setting Off, Focus [Setting2], Snap Focus Distance, File Format [Set- ting4], Aspect Ratio, JPEG Recorded Pixels, AE Metering [Set- ting3], ISO Setting, Flash Mode, Flash Exposure Comp., Drive, Self-timer, Image Control [Setting1], One Push AE in M Mode, Outdoor View Setting [Setting5] p.121 Fn Button Setting Off, Focus, Set MF, Set Snap, Set Tracking AF, Enable AF, AF+AE Lock [Fn Button], AE Lock, Face Detection, Snap Focus Dis- tance, File Format, JPEG → RAW, JPEG → RAW+, Aspect Ra- tio, Crop, JPEG Recorded Pixels, Framerate, Still/Movie [Movie/ Wireless Button], AE Metering, ISO Setting [ISO Button], Flash Mode, Flash Exposure Comp., ND Filter, Drive Mode [Drive But- ton], Drive, Continuous Shooting, Self-timer, Image Control, Shake Reduction, One Push AE in M Mode, 4-way Controller Action, Outdoor View Setting, Wireless LAN Setting [Hold Movie/Wireless Btn.], Preview Focus Settings: Same as Shutter Button, Auto-area AF, Select AF, Pinpoint AF, Tracking AF, Continuous AF Keep AE Lock: On, Off One Push AE in M Mode: Program AE, Aperture Priority AE, Shutter Priority AE p.123 Customize Settings Save Settings Rename Recall Delete Settings M Mode Dial Setting ADJ Mode Setting Fn Button Setting 133 134 Shutter Button Setting AF+AE Lock, AE Lock p.125 4-way Controller Direct Key Priority, AF point change Priority p.59 Shutter Btn. Confirmation On, Off p.125 LCD Touch Operation On, Off p.21 Touch AF AF Point, AF Point+Focus, AF Point+Focus+Shoot, Off p.50 D3 Display Customization Shooting Info. Display Standard Info. Display, Simplified Info. Display, No Information Display, Display Off p.126 Playback Info. Display Standard Info. Display, No Information Display Instant Review Display Time: 0.5sec., 1sec., 2sec., 3sec., Hold, Off Zoom Review: On, Off Delete: On, Off p.127 Quick Zoom x4, x8, x16, 100% p.127 Focus Magnification On, Off p.47 Grid Style 3x3 Grid, 4x4 Grid p.128 Electronic Level Type Level+Tilt, Level Flicker Reduction 50Hz, 60Hz E Setup Menus E1 File Setting Format Memory Card, Internal Memory p.42 Create New Folder — p.133 Folder Name Folder Name: Date, Optional A freely defined string of characters [RICOH] p.134 File Name Still Image: A freely defined string of two characters [R0] Movie: A freely defined string of two characters [R0] p.136 Sequential Numbering Folder & File, File, Off p.137 Reset Numbering — p.137 Copyright Information Embed Copyright Data: On, Off Copyright Information: A freely defined string of 32 characters p.138 E2 Display Settings Store Cursor Position On, Off p.26 Guide Display On, Off p.24 Animation Setting On, Off p.47 E3 LCD Setting LCD Setting Brightness: -7 to +7 Saturation: -7 to +7 Adjust: Blue-Amber: -7 to +7 Adjust: Green-Magenta: -7 to +7 p.128 Outdoor View Setting -2 to +2 p.129 E4 Indicator Lamps Power Button Lamp On, Off p.129 Count Down On, Off E5 Sound Effects Setting Sound Effects All, Shutter Sound Only p.130 Volume 0 to 3 [2] Setup Format Create New Folder Folder Name File Name Sequential Numbering Reset Numbering Copyright Information R0RICOH 135 136 E6 Wireless Connection Bluetooth Setting Action Mode: On anytime, On when power is on, Disable Pairing Communication Info. p.112 Wireless LAN Setting Action Mode: On, Off Communication Info. p.114 Smartphone Link Store Location Info.: On, Off Auto Image Transfer: On, Off Image Transfer while Off: On, Off p.113 E7 Power Supply Settings Auto Power Off 1min., 3min., 5min., 10min., 30min., Off p.131 Sleep Mode 1min., 3min., 5min., 10min., 30min., Off p.132 LCD Auto Dim On, Off E8 About This Device Firmware Info/Options — — Certification Marks — p.2 E9 Sensor Maintenance Pixel Mapping — p.144 Dust Removal Execute Dust Removal Startup Action: On, Off Shutdown Action: On, Off p.144 E10 Language/Date Setting Language/H English, French, German, Spanish, Portuguese, Italian, Dutch, Danish, Swedish, Finnish, Polish, Czech, Hungarian, Turkish, Greek, Russian, Thai, Korean, Traditional Chinese, Simplified Chinese, Japanese p.41 Date Adjustment Date Format: Y/M/D, D/M/Y, M/D/Y Date: 1/1/2019 to 12/31/2067 Time: 00:00 to 23:59 p.41 E11 Reset Reset Reset Item: A, B, C, D, E Execute Reset p.26 Getting Started Setting the Battery and a Memory Card Inserting the Battery and a Memory Card SD memory cards, SDHC memory cards, and SDXC memory cards can be used with this camera. “Memory card” refers to these memory cards in this manual. 1 Make sure that the camera power is off. 2 Slide the release lever on the bottom of the camera toward OPEN to open the battery/card cover. 3 Make sure that the memory card is facing the right way and then push the card all the way in until it clicks. To remove it, press in the memory card and then release your hand. 4 Insert the battery. Use the battery to press the latch and insert the battery all the way into the battery com- partment. To remove the battery, slide the latch. 5 Close the battery/card cover and slide the release lever in the opposite direction of OPEN to lock it in place. 1 2 1 2 2 37

2 38 Data Storage Location Charging the Battery Charge the rechargeable battery DB-110 using the provided USB cable I-USB166, USB power adapter AC-U1/AC-U2, and power plug before use. 1 Insert the power plug to the USB power adapter. Insert it until it clicks into place. 2 Open the terminal cover, and connect the USB cable to the USB terminal.

Images taken and movies recorded with this camera are saved in the internal memory or a memory card. Memo --------------------------------------------------------------------------------------------------------- • You can copy all data stored in the internal memory to a memory card. (p.98) • The storage capacity varies depending on the memory card. (p.151)

3 Connect the USB cable to the USB power adapter. 4 Plug the USB power adapter into a 4 power outlet. The status lamp of the camera turns on and charging starts. Depending on the battery level, the charg- ing time differs. An exhausted battery will be fully recharged in about 2.5 hours (at 25°C (77°F)). When charging is complete, the status lamp turns off. Unplug the USB power adapter from the power outlet. Storage Capacity -------------------------------------------------------------------------------------------- • About 200 pictures can be taken when the battery is fully charged. • This is based on tests conducted according to CIPA standards under the following conditions: At 23°C (73°F) temperature; the monitor is on; a picture is taken every 30 seconds; the camera is turned off and back on after 10 pictures are taken. • The storage capacity is for reference. For long periods of use, it is recommended that you carry spare batteries. Caution ------------------------------------------------------------------------------------------------------- • Use only genuine rechargeable battery (DB-110). • If the battery starts to run down more quickly even after being charged, the battery has reached the end of its service life. In this case, replace the battery with a new one. • The battery may become very hot immediately after operation. Turn the camera off and leave it to cool down sufficiently before removing the battery. • If you turn the camera on while charging the battery, the charging is interrupted. Memo --------------------------------------------------------------------------------------------------------- • You can also charge the battery by connecting the camera to a computer using the USB cable. (p.110) • The battery can also be recharged with the optional battery charger BJ-11. 3 2 39 2 39 2 40 Initial Settings 1 Press the power button. The power button lamp lights, and then the status lamp blinks for several seconds. The first time the camera is turned on after purchase, the [Language/H] screen ap- pears. When the power button is pressed again, the power turns off. Turning the Camera On in the Playback Mode -------------------------------------------------------- • When g is pressed and held with the camera turned off, the camera turns on in the playback mode. The following operations are available. g Turns off the power of the camera. Press z halfway Switches the camera to the shooting mode. Turning the Camera On with the Wireless LAN Function Enabled --------------------------------- • When g is pressed and held with the camera turned off until a beep sounds, the camera turns on in the playback mode with the wireless LAN function enabled. (p.115) • When the wireless LAN function is enabled using g, the camera is not switched to the shooting mode even if z is pressed. When performing shooting or other operations, press g to turn the camera off and press the power button to turn the camera back on. Memo --------------------------------------------------------------------------------------------------------- • The power button lamp can be set to [Off] in [Power Button Lamp] of the E4 menu. (p.129) • If no operations are made for about one minute (default setting), the camera turns off automatically to suppress battery drain. The power saving function can be set in the E7 menu. (p.131) • The number of images taken on the day (except the deleted images) is displayed when the power is turned off.

Turn the camera on and make the initial settings. Turning the Camera On Setting the Language and the Date and Time You can set the display language for menus and the date and time. 1 Use ab to select a language, and press e. The selected language is set and the [Date Adjustment] screen appears. 2 Set the display format and the date Date Adjustment and time. Use cd to select an item and ab to Set Date the and Date Time. Format, change the value. 2019 Press f to cancel the setting. 3 Press e. The date and time are set and the camera is ready to take a picture. Memo --------------------------------------------------------------------------------------------------------- • If the battery is removed for about five days, the date and time settings will be lost. To retain the date and time settings, insert a battery with sufficient power for at least two hours, and then remove the battery. • You can change the language and the date and time settings in the E10 menu. 00 00 01 / / / M/D/Y 01 Cancel OK 2 41 2 42 Formatting a Memory Card When using a new memory card or a memory card used with another device, be sure to format the memory card with this camera. The internal memory can also be formatted with the same operations. 1 Press f. The menu appears. 2 Press c twice, and then use ab to select E. 3 Press d twice, select [Format], and press d. 4 Use ab to select [Memory Card] or [Internal Memory], and press d. The confirmation screen appears. 5 Use a to select [Execute], and press e. The memory is formatted and the screen in Step 4 reappears. 6 Press f twice. The shooting screen reappears. Setup Format Memory Card Internal Memory Format Create New Folder Folder Name File Name Sequential Numbering Reset Numbering Copyright Information File Setting Format Create New Folder Folder Name File Name Sequential Numbering Reset Numbering Copyright Information All data in Memory Card will be deleted. Execute Cancel OK R0RICOH R0RICOH Caution ------------------------------------------------------------------------------------------------------- • Do not remove the memory card while formatting, or the card may be damaged. • Formatting deletes all data, both protected and unprotected. Memo --------------------------------------------------------------------------------------------------------- • When a memory card is formatted, the volume label “RICOH GR” is assigned to the card. 2 43

2 44 Basic Shooting Operation 1 Set the mode dial to J while pressing the lock button. The exposure mode is set to [Program AE] and the Live View is displayed. 2 Press z halfway. Focus is adjusted, and exposure is set. The distance is measured from up to 25 points and the green focus frame appears for the area in focus. 3 Press z fully. The image you have just taken is displayed on the monitor (Instant Review) and saved. Focus ---------------------------------------------------------------------------------------------------------- • The status lamp and the frame color show whether the subject is in focus. Focus Status Frame Color Status Lamp Before focusing White Off Subject in focus Green Green (on) Unable to focus Red Green (blinks) F5.6 400 1/400 F5.6 400 1/400 Status lamp Status lamp Focus frame 100 100

Shooting in the Program Mode

Magnifying Live View image ----------------------------------------------------------------------------- • The Live View image can be magnified. The following operations are available. Press and hold j Magnifies the Live View image. p Switches the magnification between [x4] and [x16]. abcd/Slide Moves the magnified area. e Resets to the entire image display. • The image cannot be magnified during recording in B mode. Memo --------------------------------------------------------------------------------------------------------- • You can set the display and operation of [Instant Review] that displays the captured image immedi- ately after shooting in the D3 menu. (p.127) 2 45 2 46 Viewing the Captured Images The camera switches to the playback mode and the last image you took is displayed. (Single image display) 2 View an image. 02/02/2019 02/02/2019 10:00 1 1/ 10:00 1 1/ 10:00 1 1/ 100-0001 1/2400 F5.6 The following operations are available. cd/Flick Displays the previous or next image. i Deletes the image. (p.96) p to the right/Pinch out Magnifies the image. p to the left/Pinch in In magnified view: Reduces the image. abcd/Slide In magnified view: Moves the magnified area. Press n/Double-tap Magnifies the image with the magnification ([x4], [x8], [x16], [100%]) set in [Quick Zoom] of the D3 menu. (p.127) In magnified view: Returns to the single image display. n to the left or right/r Displays the previous or next image. In magnified view: Displays the previous or next image without changing the magnification. j Switches between [Standard Info. Display], [Detailed Info. Display], and [No Information Display]. In magnified view: Switches between [Standard Info. Display] and [No Information Display]. k Displays the playback functions setting screen. (p.91) 250 250

Review the captured image on the monitor. 1 Press g. Memo --------------------------------------------------------------------------------------------------------- • If [Focus Magnification] is set to [On] (default setting) in the D3 menu, the image is magnified centering on the AF point set in shooting. • Movies cannot be magnified. • If the image is switched to the previous or next image by flicking on the touch panel, animation is displayed. The function can be set to [Off] in [Animation Setting] of the E2 menu. 2 47

348 Taking Pictures Set an aperture value or shutter speed for shooting. The following settings can be set. 2: Available #: Conditionally available Exposure Mode Aperture Value Shutter Speed Sensitivity JProgram AE #*1 #*1 2 KAperture Priority AE 2 Automatically set 2 LShutter Priority AE Automatically set 2 2 NManual Exposure 2 2 2 *1 The Program Shift allows you to select the combination of aperture value and shutter speed. 1 Set the mode dial to J, K, L, or N. The exposure mode and set value are dis- played on the shooting screen. F5.6 800 1/400 100 100

Taking Still Images Setting the Exposure Mode

2 Turn p or n to change a value. The following settings can be changed. Exposure Mode p Turn n to the Left or Right (q) J Program shift Exposure compensation K Aperture value Exposure compensation L Shutter speed Exposure compensation N Aperture value Shutter speed 349 In N mode, the exposure indicator is dis- played. As a guide, the exposure is correct when the exposure indicator is in the center. When the exposure value is in the range of ±2 EV, the indicator changes according to the exposure value. The indicator turns red when the values are outside this range. When the ISO sensitivity is set to ISO AUTO, the expo- sure compensation can be adjusted using r. 3 Shoot. Memo --------------------------------------------------------------------------------------------------------- • If [Auto EV Compensation] is set to [On] in the A2 menu, the exposure is automatically compen- sated when the correct exposure cannot be achieved in K or L mode. • Pressing z halfway activates the autofocus and AE Lock. To activate only the AE Lock, set [Shut- ter Button Setting] to [AE Lock] in the D2 menu. (p.125) F5.6 800 1/400 100 349 349 349 350 Caution ------------------------------------------------------------------------------------------------------- The lock is canceled when the button is released. AE Lock When [Keep AE Lock] is set to [On] in [Fn Button Setting] of the D2 menu, the AE lock is kept if the button in released. • If the sensitivity is fixed at a certain sensitivity in N mode or if the shutter speed is set to [B], [T], or [BT], the AE lock function is not available. AF Using the Touch Panel --------------------------------------------------------------------------------- • By default, only the AF point can be changed using the touch panel. To perform autofocus and shooting using the touch panel, set [Touch AF] in the D2 menu. AF Point Sets the AF point to the touched point. AF Point+Focus Sets the AF point to the touched point and performs autofocus. AF Point+Focus+Shoot Sets the AF point to the touched point, performs autofocus, and shoots. Off Does not use the touch AF. When the touch AF is activated in B mode, autofocus is performed with [AF Point+Focus]. Touch AF Touch AF AF Point AF Point+Focus AF Point+Focus+Shoot O AF Point AF Point+Focus AF Point+Focus+Shoot O CancelCancel OKOK

• Images are not displayed on the monitor during shooting. AE Lock -------------------------------------------------------------------------------------------------------- • The exposure value is locked while z is pressed halfway, and the lock is canceled when the button is released. • [AF+AE Lock] or [AE Lock] can be registered to [Fn Button Setting] in the D2 menu to use the func- tion with h. By default, [AF+AE Lock] is assigned to h. (p.123) AF+AE Lock Locks the focus and exposure value. Program Line ------------------------------------------------------------------------------------------------ • You can set the program line for J mode to [Max Aperture Priority] in [Program Line] of the A2 menu. Bulb, Time, and Bulb Timer ------------------------------------------------------------------------------- • If the sensitivity is fixed at a certain sensitivity in N mode, [B], [T], or [BT] can be set for the shutter speed. Shutter Speed Operation BBulb Exposure is continued while z is pressed, and canceled when the button is released. TTime Exposure is started when z is pressed, and ended when the button is pressed again. BTBulb timer Exposure is started when z is pressed, and ended after the set time has elapsed. Set the exposure time using r. • [B] and [T] are available when [Drive Mode] is set to [Single Frame Shooting] or [Multi-exposure], and [BT] is available when [Drive Mode] is set to [Single Frame Shooting], [Multi-exposure], [Interval Shooting], or [Interval Composite]. • Operation is also possible using the optional cable switch (CA-3) in place of z. When using the cable switch, connect it to the camera with the provided USB cable. • [One Push AE in M Mode] in [Fn Button Setting] of the D2 menu does not work. BT F5.6 800 100 351

352 Preview ------------------------------------------------------------------------------------------------------- Functions in N Mode ------------------------------------------------------------------------------------- • The functions for p and n in N mode can be switched in [M Mode Dial Setting] of the D2 menu. • When [One Push AE in M Mode] is registered in [Fn Button Setting] (p.123) of the D2 menu, you can select the priority of values for when the button is pressed,. Program AE Adjusts both the aperture value and shutter speed. Aperture Priority AE Sets the aperture value to a fixed value and adjusts the shutter speed. Shutter Priority AE Sets the shutter speed to a fixed value and adjusts the aperture value. When ISO AUTO is set, [One Push AE in M Mode] does not work. M Mode Dial Setting M Mode Dial Setting Custom1 Custom2 Custom1 Custom2 Aperture Shutter Speed Aperture Shutter Speed Cancel OK

• When [Hold Movie/Wireless Btn.] is set to [Preview] in [Fn Button Setting] of the D2 menu, the Preview is available. (p.123) If you press and hold k, the aperture is adjusted to the set aperture value, and you can check the depth of field. It is canceled when k is released. • When [Hold Movie/Wireless Btn.] is set to [Wireless LAN Setting] (default setting), k works as the switch to turn on/off the wireless LAN function. In this case, the Preview is not available. • In the Preview mode, you cannot perform shooting and change the aperture value. • When using the flash, the actual aperture value may differ from the Preview. • The Preview is used for checking the depth of field, so it may not function properly with AE. • This function is not available in B mode.

Using Exposure Compensation 1 Press n (o) to the left or right. The value will be plus (+) when the button is pressed to the right, and minus (-) when it is pressed to the left. In N mode, turn r. Settings can be made in the range of ±5.0 EV (±2.0 EV in B mode) in increments of 1/3 EV steps. Caution ------------------------------------------------------------------------------------------------------- • Exposure compensation is not available when the sensitivity is fixed at a certain sensitivity in N mode. 353 354 Recording Movies 2 Focus on the subject. When [Focus] is set to [AF], press z halfway. 3 Press z fully. Recording starts. The recording time is displayed while record- ing. 4 Press z again. Recording stops. Caution ------------------------------------------------------------------------------------------------------- • When [Sound Recording] is set to [On] (default setting) in the B5 menu, camera operation sounds are also recorded. • If the internal temperature of the camera becomes high during recording, recording may be termi- nated. • The following functions cannot be used in B mode. • Flash • Wireless LAN 0:01 58 ̋ 0:01 58 ̋ 1 Press k. The camera enters B mode. You can switch the camera to the movie mode also from [Still/Movie] of the A4/B4 menu. 1:00 00 ̋ Memo --------------------------------------------------------------------------------------------------------- • Movies are recorded in J mode regardless of the mode dial setting. Exposure compensation is pos- sible. • When [Touch AF] is activated in the D2 menu, autofocus can be performed using the touch panel even while recording movies. • You can record a movie continuously up to 4 GB or 25 minutes. Recording stops when the memory card or internal memory becomes full. The maximum recording time per shooting depends on the capacity of the memory card. (p.151) Shooting may stop even before the maximum recording time is reached. • The amount of time remaining is calculated based on the amount of memory available and may not diminish at an even rate. • Use a memory card of Speed Class 6 or higher for recording movies. • The use of the battery with sufficient power or the optional AC adapter (D-AC166) is recommended. 355

356 Playing Back Movies 1 Press g. An image is displayed in the single image display of playback mode. 2 Use cd to select a movie to play back. The first frame of the movie is displayed as a still image. 3 Play back a movie. a/Tap Plays back/Pauses a movie. b/Double-tap Stops playback. p Adjusts the sound volume (0 to 20). cd During playback: Fast-reverses/Fast-forwards playback. While playback is paused: Reverses/Forwards a frame. h While playback is paused: Saves a still image as a JPEG file. j Switches between [Standard Info. Display] and [No Information Display]. Memo --------------------------------------------------------------------------------------------------------- • The sound volume at the start of movie playback can be set in [Playback Sound Volume] of the C3 menu. • In [Movie Edit] of the C2 menu, a movie file can be divided into multiple segments or clipped. (p.108) 02/02/2019 10/9999 100-0010 00 ́ 20 ̋ 10:00 5 Setting the Focus Setting the Focus Mode Continuous AF Pinpoint AF 357 Auto-area AF Snap Z MF Focuses on a smaller area than [Select AF]. (p.59) Fixes the focus to the set distance. Set a distance in [Snap Focus Distance] of the A1 menu. Turn p while pressing a to change the set distance. Fixes the focus distance at infinity. This is useful for shooting distant scenes. 357 357 Tracking AF Select AF Tracks the subject and continually focuses. (p.59) When z is pressed halfway, the subject inside the frame in the center of the monitor is set as the target to be tracked, and a green target symbol appears. When a tracking target cannot be found, the frame turns red. Keeps focusing while z is pressed halfway. (p.59) [Focus-priority] or [FPS-priority] can be set in [AF.C Setting] of the A1 menu. Focuses manually. (p.60) 357 357

Measures the distances from 5 × 5 AF areas and focuses to the optimum AF area. (Default setting) Focuses to the selected AF areas. (p.59) 358 1 Select [Focus] in the A1/B1 menu, and press d. 2 Use ab to select a setting. In B mode, select from [AF], [MF], [Snap], and [Z]. 3 Press e. 4 Press f. The focus mode icon appears on the shoot- ing screen. Memo --------------------------------------------------------------------------------------------------------- • This function can be registered to [ADJ Mode Setting] or [Fn Button Setting] of the D2 menu. (p.121, p.123) If [Set MF], [Set Snap], or [Set Tracking AF] is set to [Fn Button Setting], the focus modes can be switched with button operation only. • When [Auto-area AF], [Select AF], or [Pinpoint AF] is set, faces of people are automatically detected. The setting can be changed to [Use only in Auto-area AF] or [Off] in [Face Detection] of the A1 menu. • When [Auto-area AF], [Select AF], or [Pinpoint AF] is set, the AF assist light on the front of the camera lights as necessary. The AF assist light can be set to [Off] in [AF Assist Light] of the A1 menu. • When [Focus Peaking] is set to [Highlight Edge] or [Extract Edge] in the A1/B1 menu, the out- line of the subject in focus is emphasized, and this makes it easier to check the focus. • By default, the autofocus works with h. The action of h can be set in [Focus Settings] of [Fn Button Setting] in the D2 menu. (p.124) Caution ------------------------------------------------------------------------------------------------------- • When [Shutter Button Setting] is set to [AE Lock] in the D2 menu, the autofocus does not work when z is pressed halfway. (p.125) FocusCancel OK F5.6 400 1/400 Auto-area AF MFSelect AF Pinpoint AF Tracking AF Continuous AF 100 Selecting the Desired AF Point 1 Set [Select AF], [Pinpoint AF], [Tracking AF], or [Continuous AF] in [Focus] of the A1 menu. 2 Press e on the shooting screen. The AF point can be changed. 3 Use abcd to set an AF point. Press and hold e to reset the AF point to the center. 4 Press e. The AF point is set. Memo --------------------------------------------------------------------------------------------------------- • When [4-way Controller] is set to [AF point change Prior- ity] in the D2 menu, the AF point can be moved using abcd without pressing e. In this case, the but- ton functions are as follows. e Resets the AF point to the center. Press and hold e Switches between the AF point setting by abcd and the di- rect functions (stuv). 4-way Controller Direct Key Priority AF point change Priority Cancel OK F5.6 400 1/400 100 359

360 Focusing Manually (Manual Focus) 3 Use r to set a focus distance. Memo --------------------------------------------------------------------------------------------------------- • If [MF Auto Magnification] is set to [On] in the A1/B1 menu, the image on the shooting screen is automatically magnified. This makes it easier to focus. F5.6 400 1/400 F5.6 400 1/400 If the camera fails to focus automatically, you can focus manually. The manual focus enables shooting at a fixed distance. 1 Set [MF] in [Focus] of the A1/B1 menu. The focus bar appears on the shooting screen. 2 Press a. d appears on the focus bar. 100

Shooting Close-ups (Macro) The camera focuses to the range of 6 to 12 cm from the front edge of the lens. 1 Press a (s) in the shooting mode.

The camera enters the macro mode and the macro icon appears on the shooting screen. 100 2 Shoot. To cancel the macro mode, press a again. Memo --------------------------------------------------------------------------------------------------------- • The macro mode can be set to [On] or [Off] in [Macro Mode] of the A4/B4 menu. • When [Focus] is set to [Snap] or [Z], [Select AF] is applied. Caution ------------------------------------------------------------------------------------------------------- • When [Focus] is set to [MF], pressing a enables focus distance adjustment. (p.60) To enter the macro mode, set [Macro Mode] in the A4/B4 menu. F5.6 400 1/400 361 361

362 Shooting with a Single Press of the Shutter Release But- ton (Full Press Snap) While pressing z halfway operates autofocus, pressing z fully quickly performs shooting at the set focal distance. This function is called “Full Press Snap”. The camera focuses at the distance set in [Snap Focus Dis- tance] of the A1/B1 menu. Set [Full Press Snap] of the A1 menu. When set to [On], the icon and shooting dis- tance are displayed on the shooting screen. On Performs shooting by focusing at the distance set in [Snap Focus Distance] when z is fully pressed. Off Performs autofocus and then shooting. Caution ------------------------------------------------------------------------------------------------------- • “Full Press Snap” is not available in the following cases. • B mode • Macro mode • When [Focus] is set to [MF], [Snap], or [Z] • When [Drive Mode] is set to [Self-timer] Memo --------------------------------------------------------------------------------------------------------- • Even when [Full Press Snap] is set to [On], the camera focuses at the setting in [Focus] when z is pressed halfway. F5.6 400 1/400 1.5m 100 Setting the Exposure Selecting a Metering Method Set the metering method in [AE Metering] of the A2/B2 menu. AE Metering Multi-segment Center-weighted Spot Highlight-weighted Highlight-weighted Center-weighted Multi-segment Meters exposure in multiple areas of the frame with emphasis on the bright areas. Memo --------------------------------------------------------------------------------------------------------- • This function can be registered to [ADJ Mode Setting] of the D2 menu. (p.121) • When [Link AE and AF Point] is set to [On] in the A2 menu, the metering point and the AF point can be linked in the following combinations of the [AE Metering] and [Focus] settings. AE Metering Focus Multi-segment [Select AF], [Pinpoint AF], [Tracking AF], or [Continuous AF] Spot [Select AF], [Pinpoint AF], or [Continuous AF] 363 Spot Meters exposure in multiple areas of the frame. Meters exposure with emphasis on the center. Meters exposure within a narrow range. Use this option when metering exposure in a part of an image or when the metering target subject is small. CancelCancel OKOK 363 363 364 Setting the ISO Sensitivity Memo --------------------------------------------------------------------------------------------------------- • This function can be set to [ADJ Mode Setting] of the D2 menu. (p.121) • Images taken with a higher sensitivity may appear grainy. • Depending on the ISO sensitivity setting, the setting of [D-Range Correction] in the A6 menu is disabled. (p.84) • ISO sensitivity can also be set in [ISO Setting] of the A2 menu. The detailed settings of ISO AUTO can be set from the menu. ISO Auto Upper Limit Select the highest ISO sensitivity for ISO AUTO. ISO Auto Lower Limit Select the lowest ISO sensitivity for ISO AUTO. Minimum Shutter Speed Select the shutter speed to increase the sensitivity for ISO AUTO. • When the setting of [ISO Button] has been changed in [Fn Button Setting] (p.123) of the D2 menu, set in the A2 menu. ISO Setting ISO Setting ISO Auto Upper Limit ISO Auto Lower Limit Minimum Shutter Speed ISO Setting ISO Setting ISO Auto Upper Limit ISO Auto Lower Limit Minimum Shutter Speed F5.6 400 1/400 ISO AUTO AUTO 6400 100 1/125 AUTO 6400 100 1/125 AUTO 6400 100 1/125 1 Press c (u). 2 Use r to change the value. Values from ISO 100 to ISO 102400 can be set. Press h to reset to ISO AUTO. Press h again to reset to the value set last. 100 Using a Flash When a flash unit (optional) is connected to the camera, you can discharge a flash for shooting. The following flash units can be used. • PENTAX AF540FGZ, PENTAX AF540FGZ II • PENTAX AF360FGZ, PENTAX AF360FGZ II • PENTAX AF201FG Connecting a Flash Unit 1 Remove the hot shoe cover from the camera. 2 Turn the camera and the external flash unit off and attach the flash unit to the camera hot shoe. 3 Turn the camera and the external flash unit on. Caution ------------------------------------------------------------------------------------------------------- • Turn the external flash unit off before removing it from the camera. • If the external flash unit is not recognized by the camera, turn the camera and external flash unit off and then remove and reattach the flash. Using Other External Flash Units ------------------------------------------------------------------------ • Use only flash units with one signal terminal, which must be an X-contact with a positive voltage of no more than 20 V. • When other external flash units are used, you cannot set the flash mode. The flash always operates with [Flash On]. • A flash signal is output to the X-contact of the hot shoe regardless of the flash setting. • Use an external flash unit with a lighting angle that covers the angle of view of the shooting lens. 365

366 Fires the flash with the shutter speed slowed while reducing the red-eye phenom- enon. 1 Select [Flash Mode] in the A2 menu, and press d. 2 Select [Flash Mode], and press d. 3 Use ab to select a flash mode, and press e. 4 To compensate the flash exposure, select [Flash Exposure Comp.], and press d. 5 Select a compensation value, and press e. Settings can be made in the range from -2.0 to +1.0. 6 Press f twice. Caution ------------------------------------------------------------------------------------------------------- • In L and N modes, [Slow-speed Sync] and [Slow Sync+Red-eye] cannot be selected. Setting the Flash Mode Slow Sync+Red-eye Flash On+Red-eye Slow-speed Sync Flash On Always fires the flash. (Default setting) Forces the flash to fire while reducing the red-eye phenomenon. Fires the flash with the shutter speed slowed. Use when taking nightscape pictures that include people. Use of a tripod is recommended to prevent blur. Flash Mode Flash On Flash On+Red-eye Slow-speed Sync Slow Sync+Red-eye CancelCancel OKOK Flash Exposure Comp. ncel ncel OKOK +0.3 0.0 -0.3 -0.7 -1.0 -1.3

Reducing Noise Slow Shutter Speed Noise Reduction Using a long shutter speed results in a noisy image. When [Slow Shutter Speed NR] is set in the A6 menu, noise reduction processing is carried out. Auto Applies the noise reduction according to the shutter speed, sensitivity, and internal temperature of the camera. On Applies the noise reduction when the shutter speed is slower than 1 second. Off Does not apply the noise reduction at any ISO setting. The status lamp blinks while the processing of [Slow Shutter Speed NR] is being performed. High-ISO Noise Reduction You can reduce the amount of noise when image are taken with a higher sensitivity. 1 Select [High-ISO Noise Reduction] in [Noise Reduction] of the A6 menu, and press d. The [High-ISO Noise Reduction] screen appears. 2 Use ab to select a setting, and press e. Slow Shutter Speed NR Auto OnOff CancelCancel OKOK High-ISO Noise Reduction Auto Low Medium High Custom O CancelCancel OKOK 367

368 Auto Automatically reduces noises according to the ISO sensitivity. Low, Medium, High Applies Noise Reduction at constant chosen level throughout ISO range. Custom The Noise Reduction level can be set for each ISO setting. Off Does not apply Noise Reduction at any ISO setting. The [Noise Reduction] screen appears. When [Custom] is selected, proceed to the next step. When other settings are selected, proceed to Step 5. 3 Select [Custom Options], and press d. The ISO sensitivity setting screen appears. 4 Use ab to select an ISO sensitivity and cd to select a level. 5 Press e. 6 Press f twice. Caution ------------------------------------------------------------------------------------------------------- • When noise reduction is set, it may take longer than normal to save images. High-ISO Noise Reduction SO 100 SO 200 SO 400 SO 800 SO 1600 SO 3200 Cancel OK

Setting the White Balance Make adjustments to the white balance so that white subjects will appear white under any kind of light. If the white balance is not how you thought it would be when shooting an object of a single color or when shooting under multiple light sources, change the setting.

Multi Auto White Balance Auto White Balance Fl. - Daylight White Fl. - Daylight Color Fl. - Warm White Fl. - Cool White Tungsten Daylight Cloudy Shade Automatically optimizes the white balance to match each of the separate areas of light even when multiple light sources are mixed together, such as sunlight and flash. This cannot be selected in B mode. Used when shooting in daylight under clear skies. Used when shooting in shade. Used when shooting in daylight under cloudy skies. Used with daylight fluorescent lighting. Used with neutral white fluorescent lighting. Used with cool white fluorescent lighting. Used with warm white fluorescent lighting. Used with incandescent lighting. 369 369 CTE Adjusts the white balance automatically. Exaggerates the color of the light source to leave the color of the subject. Use this setting when you want to emphasize the color used for most part of the image. 369 369 370 Set the color temperature between 2500 to 10000 K. (p.73) 1 Press t (b) in the shooting mode. The [White Balance] screen appears. 2 Use ab to select a setting. If no compensation is required, proceed to Step 6. Refer to p.72 for details on [Manual White Balance] and p.73 for [Color Temperature]. 3 Press h. 4 Use abcd to fine-tune the color. 5 Press e. The screen in Step 2 reappears. Manual White Balance White Balance Settings Multi Auto White Balance White Balance Settings Multi Auto White Balance White Balance Settings Multi Auto White Balance OK OK Daylight Daylight Cancel Cancel Cancel G1:A1 Cancel OK Cancel OK

Color Temperature Set the white balance manually. (p.72)

6 Press e. The white balance icon appears on the shoot- ing screen. G1B1 100 Memo --------------------------------------------------------------------------------------------------------- • The white balance can also be set in [White Balance] of the A3/B3 menu. • When [Composite Mode] is set to [Average] in [Multi-exposure] of [Drive Mode] (p.77), [Auto White Balance] is applied even if [Multi Auto White Balance] is set. • To automatically adjust the white balance when the light source is specified, set [WB Fine-tuning] to [On] in the A3/B3 menu. • You can set the tungsten light color tone for [Auto White Balance] in [AWB in Tungsten Light] of the A3/B3 menu. Caution ------------------------------------------------------------------------------------------------------- • The white balance may not be adjusted correctly for a subject that is mostly dark. • When using a flash, set the white balance to [Auto White Balance], [Multi Auto White Balance], or [Manual White Balance]. The white balance may not be adjusted correctly for other settings. F5.6 400 1/400 371

372 Setting the White Balance Manually 1 Select [Manual White Balance] in Step 2 on p.70. 2 Aim the camera at a white subject, such as a sheet of paper, under the light for shooting. 3 Press j. An image to be used for white balance adjustment is taken. 4 Use abcd to adjust the point. 5 Press e. The [White Balance] screen reappears. 6 Press e. The shooting screen reappears. Manual White Balance OK Cancel

Setting the Color Temperature 1 Select [Color Temperature] in Step 2 on p.70, and press d. The [Color Temperature] screen appears. 2 Use ab to set a value. The color temperature can be set between 2500 to 10000 K in increments of 10 K. Press j to fine-tune the color. 3 Press e. The [White Balance] screen reappears. 4 Press e. The shooting screen reappears. Color Temperature 5000KCancel OK 0:0 373 374 Setting the Drive Mode 3 Use ab to select a drive mode. Single Frame Shooting Continuous Shooting Interval Composite Interval Shooting Multi-exposure Bracketing Takes a single picture per shooting. — Performs continuous shooting while z is pressed. p.79 Takes three images with different exposure settings. p.76 Takes images while merging them together. p.77 Takes pictures automatically at a fixed interval. p.79 Merges a series of images taken continuously in such a way that the bright areas remain. Use this function when you want to record the trails of light formed by stars or the moon during nightscape shooting at a fixed position. Merges a series of images taken continuously in such a way that the bright areas remain. Use this function when you want to record the trails of light formed by stars or the moon during nightscape shooting at a fixed position. Drive Single Frame Shooting Drive Single Frame Shooting Cancel OK p.81 p.81 1 Press v (d) in the shooting mode. The [Drive Mode] screen appears. 2 Press d. The [Drive] screen appears. For [Self-timer], refer to p.83. Drive Mode Single Frame Shooting 4 Press e. The drive mode icon appears on the shoot- ing screen. 100 Memo --------------------------------------------------------------------------------------------------------- • The drive mode can also be set in [Drive Mode] of the A4 menu. Shooting Continuously (Continuous Shooting) 1 Select [Continuous Shooting] in Step 3 on p.74. 2 Press and hold z on the shooting screen. Pictures continue to be taken as long as you hold down z. F5.6 400 1/400 375

376 Shooting with Varied Exposure Values (Bracketing) 1 Select [Bracketing] in Step 3 on p.74, and press h. Drive Bracketing The detailed setting screen appears. Cancel OK 2 Use abcd to change the setting. Bracket Value Sets the range in which to change the exposure from ±0.3 to ±5.0. Bracketing Order Sets the order of 3 images to be taken from [0 - +], [- 0 +], [+ 0 -], and [0 + -]. 3 Press f. The [Drive] screen reappears. 4 Press e. The shooting screen reappears. 5 Press z. Three images are saved in the set order with one release of the shutter. Memo --------------------------------------------------------------------------------------------------------- • When using the flash, pictures are taken while automatically changing flash exposure. Bracketing Bracket Value Bracketing Order ±0.3 0−+

Shooting While Merging Images Together (Multi-expo- sure)

1 Select [Multi-exposure] in Step 3 on p.74, and press h. The detailed setting screen appears. DriveMulti-exposure 2 Use abcd to change the setting. Composite Mode [Average]: Creates a composite image with the average exposure. [Additive]: Creates a composite image with the cumulatively added exposure. [Bright]: Creates a composite image replacing only the portions that are brighter compared with the first image. Save Interim Images Specifies whether to save unprocessed images and images in the middle of processing. Images in the middle of processing are saved in JPEG format. 3 Press f. The [Drive] screen reappears. 4 Press e. The shooting screen reappears. 5 Take the first image. Composite Mode Average Save Interim Images Cancel OK Multi-exposure 377 377 Composite Mode Save Interim Images Average 377 377 378 6 To take the next image, select [Next 7 Take the next image. Repeat Steps 6 and 7. To return to the previous merged image, select [Retake shot]. 8 Select [Complete] to end shooting. The merged image is saved. Caution ------------------------------------------------------------------------------------------------------- • The settings for the following functions cannot be changed during the multiple exposure shooting. • [White Balance] of the A3 menu • [Drive Mode] of the A4 menu • [File Format], [Aspect Ratio], [Crop], and [JPEG Recorded Pixels] of the A5 menu • [Image Control] of the A6 menu Execute

shot], and then press e. To retake the image, select [Retake shot]. Next Next shot shot Retake shot Complete


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply