FREE ENGLISH RAZER KRAKEN V3 (01) PDF USER GUIDE
FREE ENGLISH RAZER KRAKEN V3 (01) PDF USER MANUAL
FREE ENGLISH RAZER KRAKEN V3 (01) PDF OWNER GUIDE
FREE ENGLISH RAZER KRAKEN V3 (01) PDF OWNER MANUAL
FREE ENGLISH RAZER KRAKEN V3 (01) PDF REFERENCE GUIDE
FREE ENGLISH RAZER KRAKEN V3 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH RAZER KRAKEN V3 (01) PDF REFERENCE MANUAL
FREE ENGLISH RAZER KRAKEN V3 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH RAZER KRAKEN V3 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD RAZER KRAKEN V3 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
RAZER KRAKEN V3 (01) PDF SUMMARY:
What’s inside the box?
The Razer Kraken V3 comes with the headset itself, which has an adjustable padded headband, oval ear cushions, a backlit Razer logo powered by Razer Chroma™ RGB, a USB connector, a microphone port, a volume control wheel, and a mic mute button. It also includes a detachable Razer™ HyperClear cardioid mic and an Important Product Information Guide.
What are the product requirements?
The product requires a direct USB-A connection and Razer Synapse software. The operating system needs to be Windows® 10 64-bit (or higher), and an internet connection is needed for software installation. The headset is compatible with PC, PS4, and PS5.
How do I set up the headset?
- Connect the headset to any of the USB ports on your PC.
- Right-click on the sound icon in the system tray, and then select Open Sound settings.
- In the Sound window, set Razer Kraken V3 as the default Output and Input device.
- Use the Razer Synapse app to customize your headset’s lighting.
How do I activate THX Spatial Audio?
Enable 360° positional audio for a natural and lifelike experience through Razer Synapse. THX Spatial Audio is only available on Windows® 10 64-bit.
How do I adjust the volume?
Rotate the volume control wheel to increase or decrease the volume.
How do I use the Razer™ HyperClear cardioid mic?
Plug the Razer™ HyperClear cardioid mic into the headphone, then bend it until it is parallel to your mouth. Make sure the mic diaphragm is in front and the air vent is facing away from your mouth.
How do I use the mic mute button?
Press the mic mute button to mute or unmute the microphone.
What should I do to ensure comfort?
It is recommended to stretch the headset gently apart before placing them over your head to minimize headband stress. Avoid overstretching the headset beyond its technical limits.
What is the Synapse tab for?
The Synapse tab is the default tab when you first launch Razer Synapse. This tab allows you to navigate the Dashboard subtab.
What does the Dashboard subtab show?
The Dashboard subtab is an overview of your Razer Synapse where you can access all your Razer devices, modules, and online services.
What does the Modules subtab display?
The Modules subtab displays all installed and available modules for installation.
What are Global Shortcuts?
Global shortcuts are custom key combinations that work across all device profiles and are from any Razer Synapse-enabled device inputs which apply across all device profiles. This feature only works for Razer Synapse-enabled device inputs.
What is the Audio tab for?
The Audio tab is the main tab for your Razer Kraken V3. From here, you can customize your device’s settings. Changes made under this tab are automatically saved to your system and cloud storage.
What is the Sound subtab for?
The Sound subtab is for adjusting the overall system volume or individual volume of all active applications, changing the default fallback device, and accessing Windows Sound properties.
What is a Profile?
A Profile is a data storage for keeping all your Razer peripheral’s settings. By default, the profile name is based on your system’s name. You can add, rename, duplicate, or delete a profile.
How do I adjust the volume?
You can adjust the audio volume of the device, and access the Windows volume mixer where you can proportionally adjust the overall volume of the system or individually adjust the volume of each active application.
What do the Sound Properties allow me to do?
You can set a default output device that the THX Spatial Audio will use when the Razer Kraken V3 is not connected. You may also click on the Windows Sound Properties link to manage the sound settings of your system, such as modifying the playback and recording device settings, sound scheme, and default communications activity.
What is the Mixer subtab for?
The Mixer subtab allows you to enable or disable the THX Spatial Audio and its settings, as well as calibrate the audio positioning of all virtual speakers of the active spatial audio mode.
What is THX Spatial Audio technology?
THX Spatial Audio technology is an advanced positional audio solution that delivers a heightened, immersive experience as you game.
What can I do with Spatial Audio Modes?
You can preview the calibration of each available spatial audio mode preset. Changing the position of any virtual speaker will automatically create a Custom Mode. You can also create a new Custom Mode, rename, duplicate, or delete a selected custom mode. You can revert the current mode to its original settings.
What is the Enhancement subtab for?
The Enhancement subtab is for customizing the incoming audio settings and frequency response of your audio system.
What does the Bass Boost setting do?
It enhances the low frequency response to improve the bass output of your headset.
What does the Sound Normalization setting do?
It reduces the loudest audio received to avoid sudden and unpleasant increases in volume.
What does the Voice Clarity setting do?
It enhances the quality of incoming voice conversations by filtering the sound to improve its clarity and volume.
What is the Audio Equalizer for?
It allows you to select from available equalizer presets designed for balance, gaming immersion, movie viewing, or enjoying music. Manually adjusting any equalizer preset will automatically set it to Custom.
What is the Mic subtab for?
The Mic subtab enables you to change the settings for all outgoing mic audio.
How can I control the Microphone?
You can control the mic volume and amount of mic input for a clearer mic audio. You can also adjust the microphone input or mute the mic.
What does the Voice Gate setting do?
It controls the amount of mic input so that it cuts out background noises and isolates your voice. Any sound that registers below the threshold will be muted.
What are the Microphone Enhancements?
You can improve the quality of the microphone by enabling the following features:
- Volume Normalization: Reduces the variation of loudness.
- Vocal Clarity: Emphasizes the voice frequency.
- Ambient Noise Reduction: Decreases environmental noise.
What is the Mic Equalizer for?
It allows you to select any of the available mic equalizer presets which best fits your mic needs. Manually adjusting any equalizer preset will automatically set it as a Custom preset.
What is Mic Monitoring (Sidetone)?
It allows you to monitor the microphone’s raw audio input through the headset with an option to increase or decrease the audio monitoring volume.
What is the Lighting subtab for?
The Lighting subtab enables you to modify your Razer device’s light settings.
How do I adjust the Brightness?
You can turn off your Razer device’s lighting by toggling the Brightness option or increase/decrease the luminance using the slider.
What does the Switch Off Lighting option do?
This is a power saving tool which allows you to disable your device’s lighting in response to your system’s display turning off.
What are the Quick Effects?
- Breathing: The lighting will fade in and out of the selected color(s). You can select up to 2 colors or randomize colors.
- Spectrum cycling: The lighting will cycle between 16.8 million colors indefinitely, and no further customization is required.
- Static: The LEDs will remain lit in the selected color. You can select a color.
What does the Chroma Sync button do?
If you have other supported Razer Chroma-enabled devices, you can synchronize their quick effects with your Razer device. Only devices that support the selected lighting effect will synchronize.
What are Advanced Effects?
The Advanced Effects option allows you to choose a Chroma Effect you want to use on your Razer Chroma-enabled peripheral. You can start making your own Chroma Effect by pressing the Chroma Studio button.
What is the Profiles tab for?
The Profiles tab is a convenient way of managing all your profiles and linking them to your games and applications.
What can I do in the Devices subtab?
You can view which games are linked to each device’s profiles or which Chroma Effect is linked to specific games. You can also import Profiles from your computer or from the cloud or create new profiles within the selected device. You can rename, duplicate, export, or delete a profile.
What is the Linked Games subtab for?
The Linked Games subtab gives you the flexibility to add games, view devices that are linked to games, or search for added games. You can also sort games based on alphabetical order, last played, or most played.
How do I link games to connected Razer devices or Chroma Effects?
Click on any game from the list, and then click Select a device and its profile to launch automatically during gameplay to select the Razer device or Chroma Effect it will link with.
What is the Settings window for?
The Settings window enables you to configure the startup behavior and display language of Razer Synapse, view the master guides of each connected Razer device, or perform factory reset on any connected Razer device.
What can I do in the General tab?
The General tab enables you to change the software’s display language, start-up behavior, display theme, and on-screen notifications display. You may also manually sync your profiles to the cloud or view the master guide of all connected Razer devices and installed modules.
What is the Reset tab for?
The Reset tab allows you to perform a factory reset on all connected Razer devices with on-board memory and/or reset Razer Synapse tutorials. By resetting a Razer device, all profiles stored on the selected device’s on-board memory will be erased.
What does the About tab display?
The About tab displays brief software information, copyright statement, and provides relevant links for its terms of use. You can also use this tab to check for software updates, or as a quick access to Razer’s social communities.
What are the safety guidelines for using the Razer Kraken V3?
If you have trouble operating the device and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for assistance. Do not take apart the device or attempt to operate it under abnormal current loads. Keep the device away from liquid, humidity, or moisture. Operate the device only within the temperature range of 0°C (32°F) to 40°C (104°F). Remove the device when engaging in any activities that requires active awareness of your surroundings. Reduce the volume to a comfortable level when listening for prolonged periods of time.
How do I maintain the Razer Kraken V3?
Once a month, unplug the device and clean it using a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents.
CLICK HERE TO DOWNLOAD RAZER KRAKEN V3 (01) PDF MANUAL