QCY T1 (01) PDF MANUAL


Post questions, comments, reviews or page errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD QCY T1 (01) PDF MANUAL


PDF Content Summary: Overview Choose EarTips Large Middle Small LED MFB Mic Pogo Pins (For first time pairing) Take out both two EarBuds then re-insert them into the case to activate the earphones. Notes: If EarBuds fail to be charged, please charge the case via USB cable(for details, please refer the following step). How to Pair Push both EarBuds into charging case to activate them then take out from the case and they will auto power on and pair (Please try the following steps, in case you fail to build connection.) Power off two EarBuds and tap and hold MFBs on both of them for 20s (LED will blink red and white then turn off and 10s later blink red and white 3 times). Tap and hold two EarBuds for 1s to power on(LED blinks red white twice) and two EarBuds will auto pair with each other. Then right EarBud will auto enter pairing mode(LED blinks red and white) when LED on left EarBud turn off. On cellphone, search for QCY-T1_R and tap to connect both EarBuds with cellphone. Notes: if two EarBuds fail to pair with each other in 20s, they will enter pairing mode(connectable to cellphone). Functions Power-on Method 1: take earphones out from the charging case and they will auto power on(LED glows solid white). Method 2: power off earphones and hold MFB for 1s to power on(LED glows solid white). Hold Power-off Hold MFB for 3s(red LED will turn on for 2s). Hold Ignore Call Hold MFB for 1s to ignore incoming call. Answer Call Tap MFB to answer incoming call and tap again to end it. Tap Switch Audio Output When calling, hold MFB for 1s to switch audio output between cellphone and earphones. Hold Mute-on/off When calling, double tap MFB to switch mute on/off.

User Manual It is recommended you try middle EarTips first they fit most people. The Following Functions Can Only be Enjoyed with each other. Right EarBud will auto enter pairing mode when LED on left EarBud turns off. On cellphone, search for QCY-T1_R and tap to connect cellphone to both EarBuds. Tips Warranty Card Hold Double tap FCC Statement

Playback/pause When standby in stereo mode, tap MFB to play and tap again to pause. Tap Skip Track Forward/backward When playing, double press MFB on right/left EarBud to skip track forward/backward. Double tap Voice Assistant When standby, hold MFB for 1s to activate voice assistant (like Siri). Hold in Mono Mode Single EarBud Re-connection Power on single EarBud(LED will turn on white), tap MFB to re-connect to the last device in connection records, if any. Charge the Earphones Insert the earphones into charging case(pogo pins should be well-contacted). LED will be solid red when charging and turn to white for 60s once topped up. Charge the Case Please charge the case via USB cable. LED glows solid green when the case is being charged and turn off once topped up. Product Parameter Model: T1 Operation Range: 10m(with no obstacle) Bluetooth version: V5.0 Charging time: approx. 2hr Standby time: approx. 120hr Music time: approx. 4hr Battery type: li-ion Bluetooth profiles: HFP/HSP/A2DP/AVRCP Battery capacity(earphones): 3.7V 43mAh Battery capacity(charging case): 3.7V 380mAh Input parameter(charging case): 5V 500mA (All technical data shall be subject to practical performance.) 5 Hazardous substances and their contents in the item Hazardous Substances Part Name (Pb) (Hg) (Cd) (Cr(VI))(PBB) (PBDE) Main body Battery Ear tips Accessories Charging cable This form is made by SJ/T 11364 regulation. O:means that hazardous substance content in the homogeneous materials of this part is within the limits of GB/T 26572 regulation. X :means that hazardous substance content in, at least, one certain homogeneous material of this part is beyond the limits of GB/T 26572 regulation. Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time. Perform standard: Q/HL 1-2016 Q/HL 2-2017 Manufacturer: Dongguan Hele Electronics Co., Ltd. Address: Daojiao Town, Dongguan City, Guangdong, China 1. Before using the headset, please read the manual carefully and keep it for future references. 2. The headset need to be fully charged prior to first-time use. 3. If the headset is left unused for over two weeks, please recharge it periodically. 4. Please use the chargers made by qualified manufacturer. 5. If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headsetoccurs, reboot or reset it. Caveats 1. Never disassemble or modify your headset for any reasons to avoid any damages and danger. 2. Do not store the headset in extreme temperatures (under 0℃ or over 45℃). 3. Avoid using the indicator close to the eyes of children or animals. 4. Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electricshock. 5. Do not use harsh chemicals or strong detergents to clean the headset. 6. Keep the headset dry. Warranty Period 12 months after you purchase this item.(or you may inquire your local shopper for more details.) Free Service: Supposing any defects caused by quality issues occur within the warranty period, please take this warranty card and purchase receipts to your distributor for free exchange service. Model Number: Date of Purchasing: User's Name: User's Phone: User's Address: Shop's Name: Shop's Address: Comments: Free exchange service will not be accessed under following circumstances: 1. Damages caused unauthorized disassembly. 2. Defects or physical damages caused by leaking or dropping off. 3. Damages by act of God.Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. MADE IN CHINA FCC ID: RDR-Q26


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply