PYLE PURE CLEAN PCTLW310 (01) PDF DOCUMENT

The PYLE PURE CLEAN PCTLW310 features:

• Intuitive Single-Touch Controls

• Fragrant Disc Holder for Essential Oils

• Adjustable Timer Function to Set Heating Durations (15, 30, 45, or 60 Minutes)

• Easy-to-Clean Interior Surfaces

• Auto Shut-Off Feature for Safety and Energy Conservation

• Durable, Heat-Resistant Materials

• LED Indicator Lights for Clear Heating Status

• LED Display for Clear Settings Visibility

• Compact and Space-Saving Design

• Maintains Hygiene and Cleanliness Over Extended Periods

• Perfect Size for Two Large Bath Towels

• Versatile Usage in Bathrooms, Bedrooms and Spas

• Built-in timer to heat your towels for 15, 30, 45 or 60 minutes

• Automatically shuts off feature.

The box contains:

• Towel Warmer

• Power Cord

• Construction Material: ABS, PC Galvanized Sheet

• Power Supply: 500W

• Power Output: 120V AC

• Frequency Response: 60Hz

• Volume: 20L

• Power Cord Length: 7.22 ft

• Product Dimension (L x W x H): 12″ x 12″ x 21.5″ -inches

To reduce the risk of serious injury, please note that this is not a toy. Do not allow children to operate or play near the towel & blanket warmer.

To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.

All of the safety and operating instructions should be read, adhered to, and followed before the unit is operated.

• FOR HOUSEHOLD USE ONLY

• FOR ADULT USE ONLY

• FOR DRY FABRIC ITEMS ONLY

To reduce the risk of fire, electric shock, or serious injury to persons when using the appliance, follow basic precautions including the following:

• Read all instructions before using the appliance.

• Always unplug the unit from the electrical outlet immediately after using.

• Do not use the appliance for anything other than its intended use.

• Do not place or store the unit where it can fall or be pulled into a tub or sink.

• Do not place in or drop into water or other liquid.

• Do not reach for a unit that has fallen into water. Unplug it immediately.

• Care should be taken so that objects do not fall into and/or liquids are not spilled onto the unit.

• This unit should never be left unattended when plugged in.

• Close supervision is necessary when this unit is used near children or disabled persons.

• Use this unit for its intended use as described in this manual.

• Never operate this unit if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped in water.

• Keep cords away from heated surfaces. Do not wrap the cord around the exterior of the appliance or let the cord hang over a table or counter edge.

• Do not use outdoors.

• Do not alter the safety plug or use an extension cord with this device.

• Do not operate with a voltage converter.

• Do not touch hot surfaces.

• Do not use accessory attachments not recommended by the manufacturer, as this may cause injuries.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

1. Open the Lid and remove any packaging contents.

2. Place the Towel Warmer on a dry, level, hard surface.

3. Insert Plug into a standard 120V outlet.

NOTE: This Towel & Blanket Warmer has a 3-prong grounding plug. To reduce the risk of electric shock, plug the power cord into a grounded (earthed) electrical outlet that is easily accessible.

The Towel & Blanket Warmer can comfortably warm up two large cotton bath towels or a personal throw blanket.

1. Insert the power cord into an electrical outlet.

2. Open the LID and place ONLY DRY towel(s) or blanket inside. NOTE: Only pure cotton or other materials of clothing with a temperature resistance of 140°C/284°F or more can be heated. Placing damp or wet towels inside the product can damage it and pose serious safety risks.

3. Close the LID.

4. Press the ON/OFF BUTTON. The white LED background light will light up to indicate that the product is heating. The default heating time is 15 minutes. When the inner wall temperature reaches 122°F/50°C, the LED light above the switch will be red. After shutting down, as long as the internal temperature is higher than 122°F/50°C, the LED light above the switch will flash red, which means it is unsafe to touch. Please wait for it to cool down.

5. The unit provides 1 minute rapid heating and takes 6 minutes to reach high temperature. NOTE: The warmer can reach approximately 266°F/130°C and remain hot for the duration of the heating cycle.

6. Open the lid to remove the towel(s) or blanket. NOTE: To avoid damage to the product, gently raise the lid when removing items.

7. Press the ON/OFF BUTTON at any time to stop or start the heating cycle.

8. The product will automatically turn off after 15/30/45/60 minutes. The timers can be freely switched. Each time you press the timer button, the working time counts down again from 15/30/45/60 minutes.

9. The product starts to count down, and the time display also counts down, displaying 15-14-13…

10. After the heating cycle is complete, the INTERIOR SURFACE of the Towel & Blanket Warmer will remain dangerous to touch until the LED light turns off.

This fragrance disc is designed for users who like to use aromatherapy tablets or essential oils when warming towels.

1. Remove the Fragrance Disc from its sealed plastic bag.

2. Slide it into the Fragrance Disc Holder located on the underside of the lid.

The error codes indicate the following issues:

• E0: The NTC (temperature sensor) is open.

• E1: The NTC is short-circuited.

• E3: Over temperature. This will display if the temperature of the inner wall is higher than 140°C/284°F. In this case, the unit will automatically shut down and can no longer be turned on.

1. Use only pure cotton or other materials of clothing with a temperature resistance of 140°C/284°F or more.

2. For fast and even heating, loosely pile one towel into the Towel & Blanket Warmer. Tightly rolled or folded towels will take longer to heat thoroughly. Two towels will take longer to heat than one.

3. Use only with DRY fabrics. Note: Do NOT use with damp or wet articles.

4. Avoid using delicate fabrics that cannot withstand high heat. Any fabric indicating that a cool iron must be used may not be able to withstand the heat of the warmer, resulting in damage to the fabric and the product.

5. Once the heating cycle has begun, keep the lid closed. This will prevent heat from escaping. Opening the lid mid-cycle may result in slower heating times. Note: Condensation on the lid and interior of the product is normal.

6. When used with the warmer, the Fragrance Disc Holder may warp over time.

7. The Fragrance Disc can last for up to two years at room temperature. The longevity of the scent will decrease when exposed to heat from the warmer. Replace the disc when you no longer smell the scent.

REMOVE THE POWER CORD FROM THE ELECTRICAL OUTLET BEFORE CLEANING.

WIPE WITH A DRY CLOTH ONLY WHEN UNIT IS COOL TO THE TOUCH.