PYLE PLEDRD42 (01) PDF MANUAL

Mount the light bar in a desired location. Keep the bottom base nuts snug but don’t tighten immediately. First, adjust the bar so it is centered on your off road vehicle (or wherever you’re deciding to mount), then tighten the bolt on the bottom of the bracket.

MODEL	LED Power	Operating Voltage	Waterproof Rating	Bulbs	Lumen	Color Temp	Material	Lens Material	Mounting Bracket	Beam Type	Dimensions	Life
PLEDRD27	27W	10-30V DC	IP 67	9pcs*3w high intensity Epistar LEDs	1,890 LM	6000K	Diecast Aluminum	PC	Stainless Steel	Flood beam (60°)	113*113*50mm	> 30,000 Hrs
PLEDSQ27	27W	10-30V DC	IP 67	9pcs*3w high intensity Epistar LEDs	1,890 LM	6000K	Diecast Aluminum	PC	Stainless Steel	Flood beam (60°)	108*108*50mm	> 30,000 Hrs
PLEDRD42	42W	10-30V DC	IP 67	14pcs *3W Epistar High intensity LEDs	2,940 LM	6000K	Diecast Aluminum	PC	Stainless Steel	Flood beam (60°)	113*113*63mm	> 30,000 Hrs
PLEDSQ48	48W	10-30V DC	IP 67	16pcs *3W Epistar High intensity LEDs	3,360 LM	6000K	Diecast Aluminum	PC	Stainless Steel	Flood beam (60°)	108*108*62mm	> 30,000 Hrs
PLED32B180	180W	10-30V DC	IP 67	60pcs *3W Epistar High intensity LEDs	12,600LM	6000K	Diecast Aluminum	PC	Alu firm bracket	Combo 30° + 60°	810*85*80mm	> 30,000 Hrs
PLED42B240	240W	10-30V DC	IP 67	80pcs *3W Epistar High intensity LEDs	16,800 LM	6000K	Diecast Aluminum	PC	Alu firm bracket	Combo 30° + 60°	1060*85*80mm	> 30,000 Hrs
PLED52B300	300W	10-30V DC	IP 67	100pcs *3W Epistar High intensity LEDs	21,000 LM	6000K	Diecast Aluminum	PC	Alu firm bracket	Combo 30° + 60°	1320.2*85*80mm	> 30,000 Hrs
PCLED28B180	180W	10-30V DC	IP 67	60pcs *3W Cree High intensity LEDs	15,300 LM	6000K	Diecast Aluminum	PC	Alu firm bracket	Combo 30° + 60°	710*80*65mm	> 30,000 Hrs
PCLED36B234	234W	10-30V DC	IP 67	78pcs *3W Cree High intensity LEDs	19,890 LM	6000K	Diecast Aluminum	PC	Alu firm bracket	Combo 30° + 60°	913*80*65mm	> 30,000 Hrs
PCLED44B288	288W	10-30V DC	IP 67	96pcs *3W Cree High intensity LEDs	24,480 LM	6000K	Diecast Aluminum	PC	Alu firm bracket	Combo 30° + 60°	1120*80*65mm	> 30,000 Hrs
PCVLED42B240	240W	10-30V DC	IP 67	80pcs *3W Cree High intensity LEDs	16,800 LM	6000K	Diecast Aluminum	PC	Stainless Steel	Combo 30° + 60°	1065*87*80mm	> 30,000 Hrs
PCVLED50B288	288W	10-30V DC	IP 67	96pcs *3W Cree High intensity LEDs	20,160 LM	6000K	Diecast Aluminum	PC	Stainless Steel	Combo 30° + 60°	1270*87*80mm	> 30,000 Hrs
PCVLED52B300	300W	10-30V DC	IP 67	100pcs *3W Cree High intensity LEDs	21,000 LM	6000K	Diecast Aluminum	PC	Stainless Steel	Combo 30° + 60°	1320*87*80mm	> 30,000 Hrs

NOTE: Wiring Harness not included and sold separately.

** Optional, recommended power supply connection cable (PLEDHN3M) shown in wiring diagram (next page)

Vehicles-4×4, SUV, Jeep, Truck, Tractor, Rhinos And Other Multipurpose Vehicles such As Excavator, Forklift And Golf Cart

Others-Indoor & Outdoor uses, Off Road Lighting, Trailer Interior & Exterior Lighting, Construction Lighting, Garden, Backyard Lighting, Boat Lighting, Hotels, City Squares Public Building, Mining, Outdoor Billboards’ Lighting, Outdoor Landscape Lighting, etc.

The optional wiring harness accessory is the PLEDHN3M, a 14 Gauge Wiring Harness with a Marine Grade Power Switch and Fused Power Supply. It is not included with the light bar and is sold separately.

1. POWER ON/OFF SWITCH

2. RELAY

3. RELAY FUSE

4. NEGATIVE BATTERY CONNECTION

5. POSITIVE BATTERY CONNECTION

6. LED LAMP CONNECTION (SAME AS 2 OR 4 OUTPUTS)

7. LED LAMP

Power Supply Cable Setup Wiring

Universal Compatibility for Custom Installation & Applications

Includes Waterproof Power ON/OFF Switch

Coated, Rugged & Weather-Resistant

Integrated Relay Connector Tab

Universal Circlip Power Connections

Works with 10-30V DC Power Sources

Total Cable Length: 9.8 ft.(3 Meter)

14 AWG Wire

40 Amp Integrated Power Relay

30 Amp Blade Inline Fuse