PYLE PDWR54BTB (01) PDF MANUAL

PYLE PDWR54BTB (01) PDF SUMMARY:

What features are included in the system?

The system includes the following features:

• System Includes (2) Speakers
• Active & Passive Speaker System
• Built-in 2 Channel Amplifier
• Bluetooth Wireless Music Streaming
• Marine Grade Waterproof Construction
• 2-Way Full Range Stereo Sound
• Custom Tooled Design for High Power and Deep Bass Response
• Removable & Rust Proof Aluminum Speaker Grills
• Gold Plated Speaker Plug Terminals
• RCA (L/R) Audio Input Connector Jacks
• Single RCA Speaker Output Connector Jack
• Rotary Volume Control
• Spring Loaded Mounting Bracket Included
• Heavy Duty Engineered Plastic Cabinet
• Built-in Capacitor Speaker Protection
• Ability to Daisy-Chain Active Speaker to Passive Speaker as Stereo System
• Excellent for Monitor or Surround Sound Applications
• Great by the Pool, on the Patio or in the Boat
• For Indoor / Outdoor Use

---

What is included in the box?

The following items are included in the box:

• 2 Loudspeakers
• 2 Brackets
• 4 Bracket Bolts
• 4 Screws
• 1 Connection Wire
• 1 RCA Wire

---

What are the Bluetooth connectivity features?

The Bluetooth connectivity features are:

• Instantly Stream Music from Your Connected Device
• Works with All of Your Favorite Devices (iPhone, Android, Smartphone, iPad, Tablet, PC, etc.)
• Bluetooth Version: Bluetooth 5.3
• Bluetooth Network Name: PyleUSA
• Bluetooth Wireless Range: 30’+ Feet

---

What are the technical specifications of the speakers?

The technical specifications of the speakers are:

• Marine Grade IP44 Rating
• 1.0" Polymer Dome Tweeters
• Magnet Size:
  • PDWR54BTB/PDWR54BTW: 10 oz.
  • PDWR64BTB/PDWR64BTW: 14.5 oz.
• Cone Material: PP Mica + Rubber Surround
• Frequency Response:
  • PDWR54BTB/PDWR54BTW: 90Hz-20kHz
  • PDWR64BTB/PDWR64BTW: 45Hz-20kHz
• 4 Ohm Impedance
• Dimensions (L x W x H):
  • PDWR54BTB/PDWR54BTW: 5.75" x 7.09" x 9.88" -inches
  • PDWR64BTB/PDWR64BTW: 7.28" x 9.25" x 13.0"-inches

---

What is the warning regarding California Prop 65?

The product may expose you to chemicals, which is known to the state of California to cause cancer, birth defects and other reproductive harm. Do not ingest. For more info go to: http://www.P65warnings.ca.gov

---

What should I do before using this product?

Read all instructions carefully before using this product and retain the owner’s manual for future reference.

---

What should I do if this equipment causes harmful interference to radio or television reception?

Try one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

---

What are the conditions this device complies with?

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

---

What maintenance should I perform on the speakers?

Regularly inspect the speakers and brackets for any signs of wear or damage. Tighten any loose components as needed to maintain a secure installation.

---

How should I clean the speakers?

Use a soft, dry cloth to clean the speakers and brackets. Avoid using abrasive cleaners, solvents, or water, as these may damage the surface or internal components.

---

How should I store the speakers when they are not in use?

If the speakers are not in use for an extended period, disconnect them from the power source and remove them from the mounting brackets. Store the speakers and accessories in a cool, dry place, away from direct sunlight and moisture.

---

How do I ensure wireless BT streaming is connected?

Ensure the Wireless BT Streaming feature is turned on for your device. When your device is within Bluetooth (BT) range, it will connect automatically. It will disconnect automatically when it is out of range.

---

How do I mount the bracket?

Follow these steps to mount the bracket:

1. Remove the bracket knobs and the bracket from the speaker.
2. Hold the bracket up to the mounting surface. The speaker can be mounted either horizontally or vertically. Ensure the speaker wire fits through the large, circular wire hole in the bracket. Align the bracket so it is square with the surroundings (use a level for accuracy).
3. Mark the locations of the three screw holes. Use all of the holes.
4. Drill pilot holes into the mounting surface.
5. Carefully pull the speaker wire through the wire hole in the center of the mounting bracket. Align the bracket so the holes line up.
6. Use the provided hardware to attach the bracket to the mounting surface.

---

What final adjustments should I make after mounting the speakers?

1. After confirming that the speaker is in phase and functioning correctly, angle the speaker for optimal sound.
2. Hand-tighten the bracket knobs only. Avoid using power tools, as they may over-tighten the knobs and strip the threads of the insert.
3. Ensure the entire installation is safe and secure.

---

Table: Speaker Models and Specifications

Model	Color	Speaker Size	Built-in BT	Marine Grade	MAX Power	RMS Power
PDWR54BTB	Black	5.25"	Yes	Yes	600	300
PDWR54BTW	White	5.25"	Yes	Yes	600	300
PDWR64BTB	Black	6.5"	Yes	Yes	800	400
PDWR64BTW	White	6.5"	Yes	Yes	800	400