PULSAR EE6959MIXACTCO (01) PDF MANUAL

PULSAR EE6959MIXACTCO (01) PDF SUMMARY:

What are the basic functions of the speaker?

To turn on the speaker, slide the On/Off switch to the ‘On’ position. To pause a track, press ‘►’; press it again to resume the track. To select the next track, press ‘+’ once. To select the previous track, press ‘-’ once. To increase the volume of the speaker, press and hold ‘+’, and press and hold ‘-’ to decrease it. To cycle between modes, press ‘M’ until the desired operation is selected. To turn off the speaker, slide the On/Off switch to the ‘Off’ position.

How do I use the Bluetooth mode?

Step 1: Once the speaker has been turned on, the LED indicator light will flash to signal that the speaker is ready to be paired with a Bluetooth compatible device. Step 2: Search for the speaker using a Bluetooth compatible device. Select ‘EE6959’ to connect and pair. After a connection has been made, a voice will sound to signal that the devices are paired. Step 3: To unpair or remove a Bluetooth compatible device from the speaker, turn off the Bluetooth function on the compatible device. The speaker can now be paired with a new compatible device. Note: Once connected, volume can be controlled using either the speaker or the relevant controls on the Bluetooth compatible device.

How do I make phone calls via a Bluetooth compatible device?

Step 1: Using the Bluetooth compatible device, dial the number to be called and select the Bluetooth/hands-free option. The speaker and its built-in microphone will now act as a hands-free device. Step 2: To connect or disconnect a call using the speaker, press " > ". Step 3: To redial the last number, press ‘>’ twice. Step 4: The volume of the phone call can be controlled using either the speaker or the Bluetooth compatible device. Step 5: To reject an incoming phone call, press and hold ‘►’.

How do I use the TF Card/USB Mode?

Step 1: To use TF card mode, insert a TF card (not included) into the TF card slot. The speaker will automatically change to TF card mode. Step 2: To use USB mode, insert a compatible USB drive into the USB port. The speaker will automatically change to USB mode. Step 3: If the speaker does not automatically change to TF card or USB mode, press ‘M’ until the desired operation is selected. Note: Once connected, volume can be controlled using the speaker. No USB drive should be inserted while using TF card mode or vice versa, as this could interfere with playback. The speaker will only recognize MP3 audio files; if other files are present on the TF card or USB drive, this may prevent the speaker from playing.

How do I use FM Mode?

Step 1: Press ‘M’ to cycle through the options and select FM mode. Step 2: Press and hold ‘►’ to search for a radio station. The speaker will automatically store the radio stations. Step 3: Use ‘+’ and ‘-’ to select a stored radio station. Note: To maximize signal strength, connect one end of the line-in Aux. cable to the Aux. input port on the speaker; it will now act as an antenna.

What do I do if the speaker has no power?

The speaker has run out of charge. Charge the speaker following the instructions in the section entitled ‘Charging the Battery’.

What do I do if the speaker has no sound?

The volume level is set too low. Check that the volume level is set at an audible level and adjust accordingly with the connected device. The speaker is not paired with a Bluetooth compatible device. Follow the instructions in the section entitled ‘Bluetooth Mode’.

What do I do if I am unable to pair a device with the speaker?

The Bluetooth device is not compatible with the speaker. Check that the Bluetooth device is compatible with the speaker and that the Bluetooth function is switched on.

What do I do if the charge of the speaker depletes quickly?

The volume level is set too high. Excessive use of the speaker at high volumes will drain the battery quickly. Charge the speaker following the instructions in the section entitled ‘Charging the Battery’ and listen at a lower volume for better results. The battery may be reaching the end of its service life and the speaker will need to be disposed of. See the section entitled ‘Battery Safety’.

What do I do if I am unable to tune into a radio station?

The area that the radio is situated in may have poor coverage. To maximize signal strength, connect one end of the line-in Aux. cable to the Aux. input port on the speaker; it will now act as an antenna. Move the radio to a position in which it may receive a stronger signal, for example, near a window.

What is the recommended way to charge the battery?

It is recommended that the battery is fully charged before first use; this will take approximately 3 hours. Connect the micro USB end of the USB charging cable into the 5V charging port on the speaker and the other end to a compatible USB port.

What are some care and maintenance tips?

• Wipe the speaker with a soft, lint-free cloth.
• DO NOT:
  • Use any abrasive cleaning solvents to clean the speaker.
  • Expose the speaker to extremely high or low temperatures.
  • Drop the speaker.
  • Attempt to disassemble the speaker.
  • Dispose of the speaker in a fire as it will result in an explosion.

What are the safety instructions?

When using electrical products, basic safety precautions should always be followed. Keep the product and its accessories out of the reach of children. Keep small parts away from children as these may present a choking hazard. Children under 8 years should be supervised to ensure that they do not play with the product. This product is not a toy. This product contains no user serviceable parts. If the product and any of its accessories are malfunctioning or damaged, the unit should be recycled. Keep the product and its accessories away from heat sources, direct sunlight, humidity, water and any other liquid, or sharp edges that could cause damage. Ensure the speaker is well-ventilated. Do not leave any objects susceptible to magnetism (cash cards, etc.) near the product. Do not operate the product with wet hands. Do not operate the product if it has been exposed to water, moisture or any other liquid, to prevent against electric shock, explosion, and/or injury to yourself and damage to the product. Do not use the product for anything other than its intended use. Do not use any accessories other than those supplied. Do not put objects into any of the openings. This product is intended for domestic use only. It should not be used for commercial purposes. To prevent possible hearing damage, do not listen at high volume levels for long periods of time – this may also damage the product.

What are the battery safety instructions?

The supply terminals are not to be short-circuited. In the event of a battery and cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. Secondary cells and batteries need to be charged before use. After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance. Keep batteries out of the reach of children. Do not crush, puncture, dismantle, or otherwise damage batteries. Do not store above 60°C. Avoid storage in direct sunlight. Do not dispose of exhausted batteries in household waste. Do not dispose of exhausted batteries in a fire as they may explode. Once the batteries have been exhausted, dispose of the product at a local recycling station. Contact the local government offices for further details. This product is fitted with a 3.7V 1200mAh rechargeable battery (non-removable).