Free English PRO’SKIT SS-968 (01) PDF Document. Free English PRO’SKIT SS-968 (01) PDF User Guide. Free English PRO’SKIT SS-968 (01) PDF User Manual. Free English PRO’SKIT SS-968 (01) PDF Owner Guide. Free English PRO’SKIT SS-968 (01) PDF Owner Manual. Free English PRO’SKIT SS-968 (01) PDF Reference Guide. Free English PRO’SKIT SS-968 (01) PDF Instruction Guide. Free English PRO’SKIT SS-968 (01) PDF Reference Manual. Free English PRO’SKIT SS-968 (01) PDF Instruction Manual. Free English PRO’SKIT SS-968 (01) PDF Operating Instructions.
CLICK HERE TO DOWNLOAD PRO’SKIT SS-968 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is included in the packing list for the PRO’SKIT SS-968 rework soldering station?
The packing list for the PRO’SKIT SS-968 includes the following items:
1. Smart Rework Station with Holder
2. User’s Manual
3. Hot Air Gun
4. Air Nozzle x 3
5. Power Cord
What are the features of the PRO’SKIT SS-968 rework soldering station?
The PRO’SKIT SS-968 has the following features:
• Microprocessor-controlled with closed circuit sensor design provides better performance and accurate temperature control.
• Temperature calibration function.
• Handle with sensor design switches work & sleep mode for real-time operation convenience.
• Provide 600W high power and wide temperature range up to 480°C.
• Auto cool-off process to prolong the lifetime of heating element.
• ESD safe design prevents static and electric leakage to damage the PCB.
• Complies with CE and ESD standard, conforms to RoHS.
• High quality air pump supply and quiet operation.
• Silicone handpiece cord wire heat-resistant up to 200°C.
• Additional ground contact and power cord socket.
• Interchangeable and applicable to most of branded hot air nozzles.
What are the specifications of the PRO’SKIT SS-968 rework soldering station?
| Specification | SS-968B | SS-968C | SS-968E |
|---|---|---|---|
| Power Input | 220V~240V~, 50Hz | 240V~, 50Hz | 110V~120V~, 60Hz |
| Power Consumption | 600W | ||
| Temperature Range | Room Temperature~480°C (896°F) | ||
| Heating Element | Metal Heating Core | ||
| Temperature Calibration | 0~699℃ (0~999°F), Adjustable | ||
| Pump/Motor Type | Diaphragm Pump | ||
| Air Capacity | 24L/min(Max) | ||
| Auto Sleep Function | YES | ||
| Auto Cool-Off Function | YES | ||
| Equipment Noise | <50dB | ||
| Temperature Display | LCD (60mm X 35mm, Backlight) | ||
| Fuse | 5A/250V (φ5x20mm) | 8A/250V (φ5x20mm) | |
| Power Plug | B | C | E |
| Heating Element Model No. | 5SS-989NB-H | 5SS-989NC-H | 5SS-989NE-H |
| Hot Air Gun Model No. | 9SS-968B-HG | 9SS-968C-HG | 9SS-968E-HG |
| Nozzle | 9SS-900-A1 (ID:Ø2.2mm) x 1pce 9SS-900-A2 (ID:Ø6.6mm) x 1pce 9SS-900-A3 (ID:Ø8.5mm) x 1pce |
||
| Dimensions | 250(L)*230(W)*170(H)mm | ||
| Weight | 3.2kg | ||
| Package | Color Box | ||
How do I set up and initially use the PRO’SKIT SS-968 rework soldering station?
To set up and use the PRO’SKIT SS-968, follow these steps:
1. Please remove the pump securing screw (M5x12 with red mark) from the bottom of the rework station. Failure to do so may result in serious problems.
2. Insert the power plug into a socket.
3. Power on the rework station, and the LCD screen will display standby status after two seconds. When you lift the hot air gun, the LCD screen will display the last setting temperature.
4. Do not unplug the power plug instantly after turning off the power switch, because the fan will keep operating to cool down the heating element. The power plug can only be unplugged while the fan stops operation completely.
How do I set the temperature and air speed on the PRO’SKIT SS-968?
To set the temperature and air speed on the PRO’SKIT SS-968, the hot air gun cannot be placed on the holder. Follow these steps:
1. Power on the rework station and lift the hot air gun. The LCD screen will display the main menu, and the last setting temperature will be displayed.
2. Press the “SET” button for one second, then choose temperature setting mode or air speed setting mode.
3. In temperature setting mode, the “Set Temp” words will be shining. Adjust the temperature by using the UP ▲ and DOWN ▼ buttons. Alternatively, you can also press the UP ▲ and DOWN ▼ buttons directly in the main menu to set the temperature.
4. In the air speed setting mode, the “Air Speed” words will be shining. Adjust the air speed by using the UP ▲ and DOWN ▼ buttons (air speed range is from 20 to 100). After stopping operation for around two seconds, it will go back to the main menu.
How do I perform a temperature calibration on the PRO’SKIT SS-968?
The hot air gun on your PRO’SKIT SS-968 should be recalibrated after changing the gun, replacing the heating element, or nozzle. To do this:
1. Press the “SET” button and the DOWN ▼ button at the same time. The main menu will display “CAL” and the setting temperature. Press UP ▲ or DOWN ▼ to input the actual temperature, then press the “SET” button to confirm and return to the main menu.
2. When the status display under the temperature is “—“, it means the temperature has not been calibrated.
What do the different status displays mean during temperature calibration on the PRO’SKIT SS-968?
During temperature calibration on the PRO’SKIT SS-968, different indicators may appear under the temperature display:
• “H” or “HH”: This means the temperature has been calibrated and increased before.
• “L” or “LL”: This means the temperature has been calibrated and decreased before.
• “HHH”: This means the temperature has been calibrated to the maximum temperature. It cannot be increased further, but it can be decreased.
• “LLL”: This means the temperature has been calibrated to the minimum temperature. It cannot be decreased further, but it can be increased.
How do I switch the temperature display between Fahrenheit and Centigrade on the PRO’SKIT SS-968?
To switch the temperature display between °C and °F on the PRO’SKIT SS-968, press the “SET” button and turn on the power switch simultaneously. Then, switch the temperature display from °C to °F by pressing the UP ▲ or DOWN ▼ button. After making your selection, press the “SET” button to confirm and return to the main menu.
How do I reset the PRO’SKIT SS-968 to its initial settings?
To reset your PRO’SKIT SS-968, press the UP ▲ and DOWN ▼ buttons at the same time. The rework station will revert to its initial settings. After one second, the LCD screen will return to the standby mode.
CAUTION: Choosing the reset mode will modify all parameters to the initial setting. Please do it carefully.
How does the Auto Sleep function work on the PRO’SKIT SS-968?
When the hot air gun of the PRO’SKIT SS-968 is placed on the holder, its temperature will start to decrease. The display will show “SLP” to indicate the hot air gun is now in sleep mode. When the temperature drops below 100°C, the station’s display will go into standby status. The rework station will awake when the hot air gun is lifted from the holder.
How does the Auto Cool-Off function work on the PRO’SKIT SS-968?
After the PRO’SKIT SS-968 rework station is turned off, the auto cool-off process activates. It leaves the blower on until the heating element cools down to 100°C. Once this temperature is reached, the rework station will shut off automatically.
CAUTION: Do not unplug the power plug when the auto cool-off process is active. Do not touch the pins of the plug to prevent electrical shock.
CLICK HERE TO DOWNLOAD PRO’SKIT SS-968 (01) PDF DOCUMENT