Free English PRO’SKIT MA-1503A (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD PRO’SKIT MA-1503A (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the features of the PRO’SKIT MA-1503A Magnifier Workbench Lamp?
The features of the PRO’SKIT MA-1503A include:
Complies with CE safety standards.
3 diopter (1.75X magnification) glass lens.
New improved clamp-on sponge design for firm contact on smooth surfaces.
Mounts to any bench or desktop.
Even, shadow-free light under the magnifying lens with 9-watt fluorescent.
Tube will make it easier for you to see and enjoy the activities longer.
Spring balanced adjustable arm for easy maneuverability and positioning.
Easy to replace the fluorescent tubes.
What are the technical specifications for the PRO’SKIT MA-1503A?
| Data | Specification |
|---|---|
| Lens | 3D (1.75X magnification glass lens) |
| Lens size | ∅190*155mm |
| Light Source | PL 9W x 2pcs compact fluorescent lamp |
| Voltage (MA-1503A) | AC 110~120V |
How do I operate the PRO’SKIT MA-1503A Magnifier Lamp?
To use the PRO’SKIT MA-1503A, follow these steps:
A. Before use, remove all packing from around the lamp.
B. Put the lamp on the horizontal table.
C. Insert the plug into a conveniently located electrical socket.
D. Switch on using the ON/OFF switch located on the surface of the base.
E. To place the head in the desired position.
What safety cautions should be followed when using the PRO’SKIT MA-1503A?
The following cautions should be observed for the safe use of the PRO’SKIT MA-1503A:
A. Indoor use only.
B. Never disassemble the magnifier lamp unless you are a qualified electrician.
C. Plug must be taken out while repairing the magnifier lamp.
D. If the external flexible cable or cord of the magnifier lamp is damaged, it should be replaced by a special cable or cord exclusively available from the manufacture or its agent.
E. Never leave the lens unattended in direct sunlight or where light can shine through it. This constitutes a fire hazard.
How can I troubleshoot the PRO’SKIT MA-1503A if it is not working?
If you encounter issues with the PRO’SKIT MA-1503A, perform the following troubleshooting steps:
1. Make sure A/C power cord is securely connected to a power outlet.
2. Turn on power switch.
3. Check tube is ok.
CLICK HERE TO DOWNLOAD PRO’SKIT MA-1503A (01) PDF DOCUMENT