Free English PHILIPS DCM1070 (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD PHILIPS DCM1070 (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What is included in the box with my PHILIPS DCM1070?
The box for your PHILIPS DCM1070 contains the following items:
• Main unit
• Remote control (with one CR2025 battery)
• User Manual
• Quick Start Guide
How do I connect power to my PHILIPS DCM1070?
To connect your PHILIPS DCM1070 to power, connect the mains cable to the wall socket.
How do I prepare the remote control for my PHILIPS DCM1070?
To prepare the remote control for your PHILIPS DCM1070, follow these steps:
1. Find the battery tray on the back of the remote control.
2. Insert one CR2025 battery with the correct polarity (+/-) as indicated.
3. Push the battery tray back into the remote control.
How do I set the clock on my PHILIPS DCM1070?
To set the clock on your PHILIPS DCM1070, follow these steps:
1. In standby mode, press and hold CLOCK SET for two seconds. The hour digits begin to blink.
2. Press TUNING +/- to set the hour.
3. Press CLOCK SET to confirm. The minute digits begin to blink.
4. Press TUNING +/- to set the minute.
5. Press CLOCK SET to confirm.
Which iPod and iPhone models are compatible with the PHILIPS DCM1070?
The PHILIPS DCM1070 is compatible with the following models:
• iPhone 3G, iPhone 3GS, iPhone 4
• iPod touch (1st, 2nd, 3rd, and 4th generation)
• iPod classic
• iPod with video
• iPod with color display
• iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation)
• iPod mini
How can I play music from and charge my iPod/iPhone with the PHILIPS DCM1070?
To play and charge your iPod or iPhone with the PHILIPS DCM1070:
1. Place your iPod/iPhone in the dock.
2. The connected iPod/iPhone will begin to charge.
3. Press SOURCE repeatedly to select the iPod/iPhone source.
4. Playback starts automatically. You can then use the playback controls on the unit or remote control.
How do I play music from a USB device on my PHILIPS DCM1070?
To play music from a USB device on your PHILIPS DCM1070:
1. Insert the USB device into the USB socket.
2. Press SOURCE repeatedly to select the USB source.
3. Playback starts automatically. If it does not, press the play/pause button.
How do I play a CD on my PHILIPS DCM1070?
To play a CD on your PHILIPS DCM1070:
1. Press OPEN/CLOSE to open the CD compartment.
2. Insert a disc with the printed side facing up.
3. Close the CD compartment.
4. Press SOURCE repeatedly to select the CD source.
5. Playback starts automatically.
How do I control playback on my PHILIPS DCM1070?
You can use the following buttons to control playback on your PHILIPS DCM1070:
• Press the play/pause button to start, pause, or resume play.
• Press the stop button to stop play.
• Press the previous/next button to skip to the previous or next track.
• Press and hold the previous/next button to search within a track, then release to resume normal play.
How do I repeat tracks or an entire disc on the PHILIPS DCM1070?
During playback on your PHILIPS DCM1070, press REPEAT repeatedly to select one of the following options:
• [REP]: Plays the current track repeatedly.
• [REP ALL]: Plays all tracks repeatedly.
To return to normal play, press REPEAT repeatedly until the repeat icon disappears from the display.
How do I play tracks in random order (shuffle) on my PHILIPS DCM1070?
During playback, press SHUFFLE to play tracks randomly. To return to normal play, press SHUFFLE again. Please note that the shuffle function is not available when you play programmed tracks.
How do I program a sequence of tracks to play on my PHILIPS DCM1070?
You can program up to 20 tracks on your PHILIPS DCM1070. Follow these steps:
1. Press the stop button to stop playback.
2. Press PROG to activate the program mode.
3. For MP3 tracks, press PRESET +/- to select an album.
4. Press the skip buttons (previous/next) to select a track number, then press PROG to confirm.
5. Repeat steps 3 to 4 to program more tracks.
6. To play the programmed tracks, press the play/pause button.
To erase the program, press the stop button twice.
How do I tune to a radio station on my PHILIPS DCM1070?
To tune to a radio station on your PHILIPS DCM1070:
1. Press SOURCE repeatedly to select the FM tuner source.
2. Press and hold TUNING +/- for two seconds. The system will automatically tune to a station with strong reception.
3. Repeat step 2 to tune to more stations.
To tune to a station with weak reception, press TUNING +/- repeatedly until you find optimal reception.
How do I program and play preset radio stations on my PHILIPS DCM1070?
You can program up to 20 preset FM radio stations on your PHILIPS DCM1070.
To program stations automatically:
1. In tuner mode, press and hold PROG for two seconds to activate automatic programming. The system will store all available stations.
To program stations manually:
1. Tune to a radio station.
2. Press PROG to activate program mode.
3. Press PRESET +/- to select a preset number.
4. Press PROG again to confirm.
5. Repeat these steps to program other stations.
To select a preset radio station, press PRESET +/- while in tuner mode.
How can I play audio from an external device through my PHILIPS DCM1070?
To play audio from an external device like an MP3 player:
1. Connect an MP3 link cable (not supplied) from the MP3 LINK jack on the PHILIPS DCM1070 to the headphone jack on your external device.
2. Press SOURCE repeatedly to select the MP3 link source.
3. Start playback on the external device.
How do I adjust the sound on my PHILIPS DCM1070?
Adjust Volume: During play, press VOL +/- to increase or decrease the volume.
Mute Sound: During play, press MUTE to mute or restore the sound.
Select a Preset Sound Effect: During play, press DSC repeatedly to select between [POP], [JAZZ], [CLASSIC], and [ROCK].
How do I set the alarm timer on my PHILIPS DCM1070?
First, ensure that the clock on your PHILIPS DCM1070 is set correctly. Then, follow these steps to set the alarm:
1. In standby mode, press and hold ALM for two seconds. The alarm time flashes on the display.
2. Press TUNING +/- to set the hour.
3. Press ALM to confirm. The minute digits will begin to blink.
4. Press TUNING +/- to set the minute.
5. Press ALM to confirm. The last selected alarm source flashes.
6. Press TUNING +/- to select an alarm source (disc, tuner, USB, or iPod/iPhone).
7. Press ALM to confirm. The volume level flashes.
8. Press TUNING +/- to set the alarm volume.
9. Press ALM to confirm. The alarm is set and activated.
How do I activate, deactivate, and stop the alarm on my PHILIPS DCM1070?
Activate/Deactivate the Alarm: In standby mode, press ALM repeatedly to activate or deactivate the timer. If the alarm is activated, the alarm icon is displayed. If it is deactivated, the icon disappears.
Stop the Alarm Ring: When the alarm rings, press the POWER button. The alarm will repeat for the next day. To stop the alarm before it rings, press ALM repeatedly until the alarm icon disappears.
How do I set the sleep timer on my PHILIPS DCM1070?
The PHILIPS DCM1070 can switch to standby automatically after a preset period. To set the sleep timer:
1. When the system is turned on, press SLEEP repeatedly to select a period in minutes (options are 15, 30, 45, 60, 90, 120).
2. To deactivate the sleep timer, press SLEEP repeatedly until [OFF] is displayed.
What MP3 disc formats are supported by the PHILIPS DCM1070?
The PHILIPS DCM1070 supports the following MP3 disc formats and structures:
• Formats: ISO9660, Joliet
• Maximum number of titles: 999 (depending on file name length)
• Maximum number of albums: 99
• Supported sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz
• Supported Bit-rates: 32-256 (kbps) and variable bitrates
What are the specifications of the PHILIPS DCM1070?
| Amplifier | |
| Total Output Power | 10W |
| Frequency Response | 60 Hz – 16 kHz, ±3 dB |
| Signal to Noise Ratio | > 62 dBA |
| MP3 Link Input | 650mV RMS |
| Disc | |
| Laser Type | Semiconductor |
| Disc Diameter | 12cm/8cm |
| Support Disc | CD-DA, CD-R, CD-RW, MP3-CD |
| Audio DAC | 24Bits / 44.1kHz |
| Total Harmonic Distortion | < 1% |
| Frequency Response | 60 Hz – 16 kHz |
| S/N Ratio | > 55 dBA |
| Tuner (FM) | |
| Tuning Range | 87.5 – 108 MHz |
| Tuning grid | 50 KHz |
| Sensitivity – Mono, 26dB S/N Ratio | < 22 dBf |
| Sensitivity – Stereo, 46dB S/N Ratio | < 45 dBf |
| Search Selectivity | > 28 dBf |
| Total Harmonic Distortion | < 3% |
| Signal to Noise Ratio | > 45 dB |
| Speakers | |
| Speaker Impedance | 8 ohm |
| Speaker Driver | 3″ full range |
| Sensitivity | > 82 dB/m/W |
| General information | |
| AC power | 100-240V~, 50/60Hz |
| Operation Power Consumption | < 15 W |
| Standby Power Consumption | < 2 W |
| USB Direct Version | 2.0 full speed |
| Dimensions – Main Unit (W x H x D) | 151 x 219 x 207 mm |
| Weight – Main Unit | 1.9 kg |
What should I do if my PHILIPS DCM1070 is not working correctly?
If you encounter a problem with your PHILIPS DCM1070, please check the following points to find a solution.
| Problem | Solution |
|---|---|
| No power |
• Ensure that the AC power plug of the unit is connected properly. • Ensure that there is power at the AC outlet. |
| No sound or poor sound |
• Adjust the volume. • On the external device: – Adjust the volume. – Ensure that it is connected correctly. – Turn on the external device. |
| No response from the unit |
• Disconnect and reconnect the AC power plug, then turn on the system again. |
| Remote control does not work |
• Before you press any function button, first select the correct source with the remote control instead of the main unit. • Reduce the distance between the remote control and the unit. • Insert the battery with its polarities (+/-) aligned as indicated. • Replace the battery. • Aim the remote control directly at the sensor on the front of the unit. |
| Disc cannot be read |
• Insert a disc with the label side up. • Wipe the disc with a clean, lint-free cloth. • The unit can only play CD. It cannot play DVD or Blu-ray. • Ensure that the disc is not a blank CD-R/CD-RW or the disc session is not finalized. |
| Poor radio reception |
• Increase the distance between the unit and your TV or VCR. • Fully extend the FM antenna. |
| Alarm does not work |
• Set the clock/alarm correctly. |
| Timer not working |
• Set the clock correctly. |
| USB device not recognized |
• Ensure that your USB device is supported by the unit. • Ensure that the file format is supported. |
| Clock/timer setting erased |
• Power has been interrupted or the power cord has been disconnected. • Reset the clock/timer. |
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD PHILIPS DCM1070 (02) PDF DOCUMENT