Free English PANASONIC ER-CBL1 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.


CLICK HERE TO DOWNLOAD PANASONIC ER-CBL1 (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

What are the general safety warnings for the PANASONIC ER-CBL1?

WARNING

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• The supply cord cannot be replaced. If the cord is damaged, the AC adaptor should be scrapped.

• Do not use anything other than the supplied AC adaptor for any purpose. Also, do not use any other product with the supplied AC adaptor.

• Be sure to switch off the appliance and remove the power plug from a household outlet before performing any maintenance.

• Do not wash the AC adaptor.


What is the safety warning for the toothbrush head of the PANASONIC ER-CBL1?

Head for toothbrush only

• Toothbrushes can be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.


What do the safety precaution charts in the manual for the PANASONIC ER-CBL1 indicate?

The chart indicates the degree of damage caused by improper operation:

DANGER Indicates potential hazard that will result in serious injury or death.
WARNING Indicates potential hazard that could result in serious injury or death.
CAUTION Indicates potential hazard that could result in minor injury or property damage.

What are the specific warnings regarding the appliance and power supply for the PANASONIC ER-CBL1?

WARNING

This appliance

• This appliance has a built-in rechargeable battery. Do not throw into fire or apply heat. Do not charge, use or leave in high temperature environment. Doing so may cause overheating, ignition, or explosion.

• Do not modify or repair. Doing so may cause fire, electric shock, or injury. Contact an authorized service centre for repair (replacement of battery etc).

• Never disassemble except when disposing of the appliance. Doing so may cause fire, electric shock, or injury.

Power supply

• Do not connect or disconnect the adaptor to a household outlet with a wet hand. Doing so may cause electric shock or injury.

• Do not use when the AC adaptor is damaged or when the fitting into the household outlet is loose.

• Do not damage the cord or the power plug. Do not deface, modify, forcefully bend or pull the cord or the power plug. Also, do not place anything heavy on, twist or pinch the cord. Doing so may cause electric shock or fire due to a short circuit.

• Do not use in a way exceeding the rating of the household outlet or the wiring. Exceeding the rating by connecting too many plugs to one household outlet may cause fire due to overheating.

• Fully insert the adaptor. Failure to do so may cause fire or electric shock.

• Regularly clean the power plug and the appliance plug to prevent dust from accumulating. Failure to do so may cause fire due to insulation failure caused by humidity.


How can I prevent accidents when using the PANASONIC ER-CBL1?

• Do not place within reach of children or infants. Do not let them use it. Putting parts or accessories in the mouth may cause an accident or injury.

• If the lubrication oil is consumed accidentally, do not induce vomiting, drink a large amount of water, and contact a physician.

• If the lubrication oil comes into contact with eyes, immediately wash thoroughly with running water, and contact a physician. Failure to do so may result in physical problems.


What should I do if the PANASONIC ER-CBL1 shows signs of an abnormality or malfunction?

Immediately stop using the appliance. Failure to do so may cause fire, electric shock, or injury.

Abnormality or malfunction cases:

• The main body or AC adaptor is deformed or abnormally hot.

• The main body or AC adaptor smells of burning.

• There is an abnormal sound during use or charging of the main body.

Immediately request inspection or repair to an authorized service centre.


What precautions should be taken when handling the removed battery from the PANASONIC ER-CBL1 for disposal?

DANGER

• The rechargeable battery is exclusively for use with this appliance. Do not use the battery with other appliances.

• Do not charge the battery after it has been removed from the appliance.

• Do not throw into fire or apply heat.

• Do not hit, disassemble, modify, or puncture with a nail.

• Do not let the positive and negative terminals of the battery get in contact with each other through metallic objects.

• Do not carry or store the battery together with metallic jewellery such as necklaces and hairpins.

• Do not use or leave the battery where it will be exposed to high temperatures, such as under direct sunlight or near other sources of heat.

• Never peel off the tube. Doing so may cause overheating, ignition, or explosion.

WARNING

• After removing the rechargeable battery, do not keep it within reach of children and infants. The battery will harm the body if accidentally swallowed. If this happens, consult a physician immediately.

• If the battery fluid leaks out and comes in contact with the eyes, do not rub the eyes, and thoroughly rinse with clean water, such as tap water. Failure to do so may cause eye injury. Consult a physician immediately.

CAUTION

• If the battery fluid leaks out and comes in contact with the skin or clothes, rinse off with clean water, such as tap water. Failure to do so may cause inflammation.


What are the parts of the PANASONIC ER-CBL1 and its accessories?

A Main body

1 Cap (Mount and remove the cap straight.)

2 Power switch

3 Charge status lamp

4 Appliance socket

5 Head release button

B AC adaptor (RE7-87)

6 Adaptor

7 Power plug

8 Cord

9 Appliance plug

Accessories

C Cleaning brush

D Lubrication oil (Please use according to the operating instructions of the head to be used.)

E Pouch


How do I charge the PANASONIC ER-CBL1?

• Wipe off any water droplets on the appliance socket.

Plug the AC adaptor into the main body and the household outlet.

• Check the charge status lamp glows. It turns off after charging is completed.

• Charging is completed after approx. 1 hour.

To check that charging is completed, insert the main body again after removing it from the AC adaptor. If the charge status lamp glows and then turns off after 5 seconds, charging is completed.

Notes

• Recommended ambient temperature for charging is 10 °C – 30 °C. It may take longer to charge, or the charge status lamp will blink quickly and the battery may fail to charge properly in extremely high or low temperatures.

• When charging the main body for the first time or when it has not been in use for more than 6 months, the charging time may change or the charge status lamp may not glow for a few minutes. It will eventually glow if kept connected.

• If there is noise from the radio or other sources while using or charging the appliance, move to a different location to use the appliance.

• Charging each time does not affect battery life, because it uses a lithium-ion battery.

• The battery will deteriorate if not used for over 6 months, so make sure to perform a full charge at least once every 6 months.

• To keep charging the battery will not affect battery performance.

• The use time after a full charge varies depending on the head.


How do I use the PANASONIC ER-CBL1?

Note: The appliance will not operate with the AC adaptor connected. The appliance may not operate in an ambient temperature lower than approximately 5 °C.

Remove the cap, mount the desired head and press the power switch.

• Clean the appliance after use.

When the remaining battery is low:

The charge status lamp blinks when the power is turned off. (It turns off after 5 seconds.)


How do I clean the PANASONIC ER-CBL1?

• Make sure that the main body is turned off.

• The AC adapter cannot be washed with water. Disconnect the adaptor and wipe with a dry cloth.

• Do not wipe with thinner, benzine, alcohol etc. Doing so may cause malfunction, cracking or discoloring of the parts.

• After cleaning, store the main body with the cap attached.

1. Remove the AC adaptor and head from the main body.

2. Rinse the main body with running water. Do not immerse the main body in water for a long time. Otherwise, the water may seep into the main body.

3. Shake up and down several times to remove the water. Be careful not to hit the appliance on the sink or any other object while draining the water.

4. Wipe off the water with a dry cloth and dry it well.


How do I troubleshoot problems with the PANASONIC ER-CBL1?

If problems still cannot be solved, contact your dealer or a service centre authorized by Panasonic for repair.

Problem Action
Appliance does not operate even after charging.

• The appliance will not operate with the AC adaptor connected. Please use the appliance after it has been sufficiently charged and the AC adaptor disconnected.

• Use the appliance in an ambient temperature approximately 5 °C or higher.

Operating time is short even after a full charge. The battery is nearing the end of its life.
The main body cannot be charged. The charging time is long or the charge status lamp will blink quickly and the battery may fail to charge properly in extremely high or low temperatures. Charge within the recommended charging temperature of 10 °C to 30 °C.

How do I remove the battery from the PANASONIC ER-CBL1 for disposal?

Remove the built-in rechargeable battery before disposing of the appliance. The battery is to be disposed of safely. This procedure must only be used when disposing of the appliance and must not be used to repair it. If you dismantle the appliance yourself, it will no longer be waterproof, which may cause it to malfunction.

1. Remove the appliance from the AC adaptor.

2. Press the power switch to turn on the power and then keep the power on until the battery is completely discharged.

3. Perform steps ① to ③ as shown in the diagram, lift the battery, and then remove it.

4. Use a Phillips-head screwdriver as shown.

5. Take care not to short circuit the positive and negative terminals of the removed battery, and insulate the terminals by applying tape to them.


What are the specifications of the PANASONIC ER-CBL1?

Power source See the name plate on the AC adaptor. (Automatic voltage conversion)
Motor voltage 3.6 V
Charging time Approx. 1 hour

• The airborne acoustical noise is described in the operating instructions of the head.

• This product is intended for household use only.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER

CLICK HERE TO DOWNLOAD PANASONIC ER-CBL1 (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.