OVELA OVELTHRWOGB (01) PDF Document

Read the following instructions carefully before use and retain the user guide for future reference. Failure to comply may result in injury or property damage.

• After removing the blanket from its packaging, check for any signs of damage.

• Keep packaging out of the reach of children.

• This blanket is for indoor use only.

• This blanket is not intended for use in hospitals or commercial environments.

• Do not push any needles, pins or sharp objects into this blanket.

• Do not use the blanket folded, wrinkled or with sharp creases.

• Do not use the blanket if it is wet or damp. Do not use this blanket with wet hands or feet.

• Use only the voltage specified on the rating label of the blanket.

• The electronic components of the controller become hot during use.

• Do not cover the controller or place it on the blanket when it is in use. Do not place the controller under a pillow or between sheets.

• Do not pull, twist or bend the wires. Do not pull or lift the blanket by the power cord.

• Regularly check the blanket and power cord for signs of wear or damage. If damaged, cease use immediately.

• This blanket must not be tucked under the bed or used as a mattress.

• This blanket is not suitable for animals.

• The controller and power cord can create a risk of entanglement, strangulation, tripping or treading if not correctly arranged. Ensure the power cord is arranged in a safe way.

• This blanket can be used by children over 8 years of age, as well as by persons with physical, sensory, or mental disabilities and those with little knowledge or experience provided they are monitored or know how use it safely and understand the risks.

• This heating blanket should not be used by young children (3-8 years old) unless the switch has been adjusted by a parent or guardian and the child has received sufficient information to use the blanket safely.

• This blanket should not be used by people who are vulnerable to heat, as well as very young children (0 to 3 years old), due to their inability to react to overheating.

• Children should not play with the blanket. Cleaning and maintenance should not be performed by unattended children.

While this blanket is on, you should not:

• Place objects on it (e.g. a suitcase or laundry basket).

• Put any other source of heat on it, such as hot water bottles, etc.

This blanket can be used at night. An electronic sensor mechanism built into the blanket protects it from overheating and automatically shuts down the power supply if it is too hot. However, do not sleep with the blanket on a high temperature, as this may cause burns or heat stroke.

• Insert the power plug into the input connector at the bottom of the blanket. Connect the plug to an electrical outlet (AC220-240V).

• Ensure that the electrical outlet is nearby and that the power cord does not create a trip hazard.

• Only switch the electrical outlet on when the plug is attached to the connector.

• If washed, the blanket must only be connected to power when it has completely dried.

• If using on a bed or chair, do not wrap the blanket tightly or sit on it as this may cause the overheat protection system to activate.

• This blanket must only be used as a heated throw, i.e. over a bed, chair, or sofa.

• Press and hold the Power button for 3 seconds to turn the blanket on/off. The display screen will illuminate ‘0’.

• Press the Power button again for 1 second to activate the temperature and timer functions.

• Press the +/- buttons to set the blanket to your desired temperature (1-10). The temperature will rise gradually until it reaches the required temperature.

• Press the timer button, and then press the +/- buttons to set the timer (1-12 hours). The blanket will turn off after the set time.

• Ensure the blanket is turned off.

• Disconnect the power plug from the electrical outlet.

• Disconnect the connector from the blanket.

• Allow the blanket to cool completely.

It is advised to not wash this blanket too frequently as doing so will reduce the life of the blanket.

Cleaning:

• When machine washing the blanket, use a laundry bag.

• The blanket can be washed very gently with water up to 30°C, and neutral detergent.

• Do not dry clean the blanket.

Drying:

• Never turn the blanket on to dry it faster. Do not hang the blanket with clothes pegs. Position it flat. Do not expose the blanket to sources of heat such as the sun, radiators, etc.

• Do not twist to dry. Do not dry in a tumble dryer. Do not press or iron it.

• Reconnect the power cord to the blanket only after it is completely dry.

If you wish to store or fold the product, make sure it has cooled completely. Do not crush it by placing objects on top. Place the blanket in its original packaging if possible and ensure that the cord is not pinched or bent. If the blanket will not be used for a long time, it is recommended to store it in its original packaging in a dry place. Do not place any objects on top of it.

Error E1 means the connector is not attached securely. Follow these steps:

1. Turn off the blanket and unplug the power plug from the electrical outlet.

2. Re-insert the power plug into the input connector at the bottom of the blanket and ensure it is secure.

3. Reconnect to power.

Error E2 means the temperature inside the controller is too high. To resolve this, power off the blanket and let the controller cool down. Then, power on again.

Error E3 indicates no calibration or abnormal calibration of the controller. Follow these steps:

1. Turn off the blanket and unplug the power plug from the electrical outlet.

2. Press the ‘+’ button and the Timer button at the same time.

3. Reconnect to power. After 5 seconds, the controller should return to normal operation.

This marking indicates that this appliance should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.