Post questions, comments, reviews or errors in the comment box below.
Your File is Ready … Download PDF
PDF Content Summary: ORFELD Instruction Manual Hand nut riveter Model: HN619X Please read the instructions before use. Contents English ........01-06 Technical description: English Name Model Weight Length Work stroke Hand nut riveter HN619X 860g 340mm (13") 7mm Suitable for Europe M3, M4, M5, M6, M8, M10, M12 Riveter nut specifications Suitable for the Americas M5, M6, M8, M10, SAE 10-24, 1/4-20, 5/16-18 Product M3 M4 M5 M6 M8 M10 M12 Suitable for Europe multi-function wrench IT IT 3333333 M5 10-24 M6 1/4-20 M8 5/16-18 M10 Suitable for the Americas - 01 - Apply to all kinds nut for various materials: M3 M4 M5 M6 M8 M10 M12 Riveter nut 10-24 1/4-20 5/16-18 Aluminium Steel Stainless steel Riveting diagram a la Rotate the rivet nut Place the working nut in the hole Put rivet the nut in place After riveting being completed, exit rivet gun - 02 - English Installation component 2. Use instruction Prepare the nut in corresponding specification MD MIO M10 (Riveter nut) M10(Nut) M10(Screw bolt) 2 Open the handle, install the nut on the screw bolt, insert the nut into the hole 3 Pushed into the handle, you can complete the riveter nut to load. - - - - ----------- - 03 4 After nut riveted in place, open the handle to the maximum angle and turn the knob counterclockwise until the Screw bolt is separat ed from the nut, and complete the riveting. 3. Screw bolt and Nut Replacement Method D Use the corresponding specifications of the wrench to loosen the nut and the knurled sleeve, remove it aside for later use. Press and hold the knob, put the hexagonal hole of the wrench into the Screw bolt, press the sleeve all the way to the end, and turn the Screw bolt left, you can easily remove the Screw bolt.As the picture shows. - 04 - English 3 Select the screw bolt to be installed, and screw it into the threaded hole clockwise as shown below. Before loosening the wrench, align the hexahedron on the screw with the hexahedron inside the sleeve. Align two faces 4 Use the corresponding specifications of the wrench to installation the Knurled sleeve and the NUT. - 05 - Precautions 1. Before use, please check if the corresponding specifications of the nut or bolt fittings are complete. 2. Replace the nuts and bolts, please put them back correctly into the matching case. 3. Before use, please check if there is any foreign matter on the screw. 4. When tightening with a wrench, do not use too much force to avoid damaging the thread. 5. Maintenance of the machine: When not in use for a long time, the foreign parts of the screw are wiped clean and coated with a little anti-rust oil or lubricating oil. 6. When riveting work, people or things cannot be standing below the work area to prevent the machine from falling, hurting people or other things. 7. Pull rivets and rivet guns. Please keep it out of the reach of children. -06 - 因認。 email@example.com 口口語口 回辦画 回蹤 加 Facebook Instagram Website Twitter RoHS 公文 Made in China
FREE ENGLISH PDF
USER GUIDE - USER MANUAL
OWNER GUIDE - OWNER MANUAL
REFERENCE GUIDE - REFERENCE MANUAL
INSTRUCTION GUIDE - INSTRUCTION MANUAL