ONKYO TX-RZ1100 (02) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD ONKYO TX-RZ1100 (02) PDF MANUAL


PDF Content Summary: > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Basic Manual Hookup Step1: Speaker Layout ............................................................3 Step2: Connect the Speakers ..................................................9 Step3: Connect the TV ..........................................................11 Step4: Connect the AV Components .....................................13 Step5: Multi-zone Connection ...............................................17 Step6: Connect Other Cables ................................................20 Setup Step7: Power On & Initial Setup ............................................21 HDMI Setup ...........................................................................22 Playback Basic Playback ......................................................................23 Network Functions .................................................................24 Others ....................................................................................26 Part Names Front Panel ............................................................................29 Display ...................................................................................30 Rear Panel ............................................................................31 Remote Controller .................................................................32 The Basic Manual includes information needed when starting up and also instructions for frequently used operations. The Advanced Manual has more detailed information and advanced settings. AV RECEIVER TX-RZ1100 2> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix What's in the box 1. Main unit 2. Remote controller (RC-926R) ×1, Batteries (AA/R6) ×2 3. Indoor FM antenna ×1 4. AM loop antenna ×1 5. Speaker setup microphone ×1 6. Power cord ×1 Glossary Dolby Atmos This unit supports playback in the Dolby Atmos format which provides 360e sound placement. Unlike existing surround systems, Dolby Atmos doesn't rely on channels, but rather enables the accurate placement of sound objects that have independent motion in a three-dimensional space with even greater clarity. Dolby Atmos is an optional audio format on Blu-ray Discs and achieves a three-dimensional sound field by introducing a sound field above the listener. ARC The ARC (Audio Return Channel) feature transfers TV audio signals via HDMI cable so that you can play the audio from the TV through this unit. Connection to an ARC compatible TV is complete with one HDMI cable. Refer 1 to the instruction manual for your TV to see if it supports ARC. (*P11) HDMI CEC functionality Control features such as linking input switching with the input selector and players conforming to the CEC standard, switching audio output and volume using the remote controller of a CEC-compliant TV, and automatically switching this unit to standby when the TV is turned off (*P13) HDMI Standby Through Video and audio signals from AV components can be transmitted to the TV even if this unit is in standby (*P13) 23 4 CAUTION: Connect speakers with 4 Ω to 16 Ω impedance. The power cord must be connected only after all other cable connections are completed. We will not accept responsibility for damage arising from the connection of equipment manufactured by other companies. 5 6Before start > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Step1: Speaker Layout

ˎ1 ˎ2 ˎ3 ˎ 1: 22e ʙ 30e, ˎ 2: 90e ʙ 120e, ˎ 3: 135e ʙ 150e
12 Front Speakers 3 Center Speaker 45 Surround Speakers 6 Powered Subwoofer 78 Surround Back Speakers
7.1-Channel System
Front speakers output front stereo sound and a center speaker outputs center sound such as dialogs and vocals. Surround speakers create back sound field. Powered subwoofer reproduces bass sounds and creates rich sound field. Surround back speakers improve the sense of envelopment created by the back sound field and provide a more realistic sound field. Furthermore, by installing surround back speakers, you can select the Dolby Atmos listening mode, which realizes the most up-to-date 3D sound, when the input format is Dolby Atmos. The front speakers should be positioned at ear height, while the surround speakers should be positioned just above ear height. Center speaker should be set up facing the listening position. Placing the powered subwoofer between the center speaker and a front speaker gives you a natural sound even when playing music. The optimal positioning is for surround back speakers to be at ear height.

0 If you are including surround back speakers in the
setup, surround speakers are required.
Go To "Hookup" (*P9)
Hooku
3
>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix ˎ1 ˎ2 ˎ3
Height Speakers; Front High Speakers/ Rear High Speakers
3 ́ or (0.9 more
m) These are types of height speakers. Furthermore, by
installing height speakers, you can select the Dolby Atmos listening mode, which realizes the most up-to-date 3D sound including overhead sounds, when the input format is Dolby Atmos. Front high speakers or rear high speakers should be situated at least 0.9 m higher than the front speakers. Front high speakers should be situated directly above the front speakers and the distance between the rear high speakers should match the distance between the front speakers. Both should be set up facing the listening position. Note that with height speakers you can install up to two sets; Height 1 Speaker and Height 2 Speaker.
Go To "Hookup" (*P9) ˎ 1: 22e ʙ 30e, ˎ 2: 90e ʙ 120e, ˎ 3: 135e ʙ 150e
3 ́ or (0.9 more m) 9: Height Speakers
$$
Front High Speakers Rear High Speakers >> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix ˎ2 ˎ1Height Speakers; Ceiling Speakers
These are types of height speakers. Furthermore, by installing height speakers, you can select the Dolby Atmos listening mode, which realizes the most up-to-date 3D sound including overhead sounds, when the input format is Dolby Atmos. Fit top front speakers on the ceiling forward of the seating position, top middle speakers on the ceiling directly above ˎ3
the seating position, and top rear speakers on the ceiling behind the seating position. The distance between each pair should match the distance between the two front speakers. Note that with height speakers you can install up to two sets; Height 1 Speaker and Height 2 Speaker. 0 Dolby Laboratories recommends placing this type of
height speakers to obtain the best Dolby Atmos effect.
Go To "Hookup" (*P9) ˎ 1: 30e ʙ 55e, ˎ 2: 65e ʙ 100e, ˎ 3: 125e ʙ 150e
9: Height Speakers
$$$
Top Front Speakers Top Middle Speakers Top Rear Speakers
5
>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix ˎ1 ˎ2 ˎ3 ˎ 1: 22e ʙ 30e, ˎ 2: 90e ʙ 120e, ˎ 3: 135e ʙ 150e
9: Height Speakers
$$$
Height Speakers; Dolby Enabled Speakers (Dolby Speakers)
These are types of height speakers. Dolby enabled speakers are special speakers designed to face the ceiling so that sound is heard after bouncing off the ceiling so that sound appears to be coming from overhead. Furthermore, by installing height speakers, you can select the Dolby Atmos listening mode, which realizes the most up-to-date 3D sound including overhead sounds, when the input format is Dolby Atmos. Place them either above the front speakers or above the surround speakers or surround back speakers. Note that with height speakers you can install up to two sets; Height 1 Speaker and Height 2 Speaker.
Go To "Hookup" (*P9)
Dolby Enabled Speakers (Front) Dolby Enabled Speakers (Surround) Dolby Enabled Speakers (Surround Back) >> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix ˎ1 ˎ2 ˎ3 ˎ 1: 22e ʙ 30e, ˎ 2: 90e ʙ 120e, ˎ 3: 135e ʙ 150e
12 Front Speakers (Bi-Amping)
Bi-Amping the Speakers
It is possible to connect front speakers supporting Bi- Amping to improve quality of the bass and treble. The effects and placements for speakers are the same as for a system that doesn't use Bi-Amping speakers.
Go To "Hookup" (*P10)
7
>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix
Speaker combinations
In any of the combinations, up to two powered subwoofers can be connected.
Speaker Channels FRONT CENTER SURROUND SURROUND
BACK HEIGHT 1 HEIGHT 2 Bi-AMP ˎ 1 ZONE 2 ˎ 1
(*P18)
Points to note with speaker combinations ˎ 1: It is not possible to use Bi-AMP and ZONE speakers at the same time. However, with 2.1 ch to 7.1 ch,
it is possible to use Bi-AMP and ZONE 2 speakers at the same time. ˎ 2: If you have not connected ZONE 3 speakers in another room but have only connected ZONE 2
speakers, connect the ZONE 2 speakers to the HEIGHT 1 jacks. However, if Bi-Amping connections are used for front speakers, connect the ZONE 2 speakers to the HEIGHT 2 jacks. ˎ 3: If front speakers are to be Bi-Amping connected, height speakers need to be connected to the
HEIGHT 2 jacks. ˎ 4: ZONE 2 speakers need to be connected to the HEIGHT 1 jack, ZONE 3 speakers need to be connected to the SURROUND BACK jacks, and height speakers need to be connected to the HEIGHT 2 jacks. ˎ 5: This unit consists of a 9 ch amplifier, so when using a Bi-Amping connection for the front speakers,
use an RCA cable to connect the power amplifier to the PRE OUT HEIGHT 2 jacks, then connect the height speakers to the power amplifier. ˎ 6: This unit consists of a 9 ch amplifier, so with this combination use an RCA cable to connect the power
amplifier to the PRE OUT BACK jacks, then connect the surround back speakers to the power amplifier.
ZONE 3 ˎ 1 (*P19)
2.1 ch
3.1 ch
4.1 ch
5.1 ch
6.1 ch ˎ 2
7.1 ch ˎ 2
2.1.2 ch ˎ 3 ˎ 4
3.1.2 ch ˎ 3 ˎ 4
4.1.2 ch ˎ 3 ˎ 4
5.1.2 ch ˎ 3 ˎ 4
6.1.2 ch ˎ 5
7.1.2 ch ˎ 5
4.1.4 ch
5.1.4 ch
6.1.4 ch ˎ 6
7.1.4 ch ˎ 6
HEIGHT 1/HEIGHT 2 When connecting 2 sets of height speakers, the height speaker combinations you can choose are as follows.
– Height 1 Speaker: Top Middle, Height 2 Speaker: Rear High – Height 1 Speaker: Front High, Height 2 Speaker: One of Rear High/Top Middle/Top Rear/Dolby Enabled
Speaker (Surround)/Dolby Enabled Speaker (Surround Back) – Height 1 Speaker: Top Front or Dolby Enabled Speaker (Front), Height 2 Speaker: One of Rear High/Top
Rear/Dolby Enabled Speaker (Surround)/Dolby Enabled Speaker (Surround Back) When connecting only one set of height speakers, select one type of height speakers from the types available. >> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix Step2: Connect the Speakers

2
1
Standard Connections
Refer to the illustration to connect the speaker system. ˎ Depending on the combination of speakers, you may need to
Make sure the exposed wires of the speakers do not stick out of the speaker terminals when connecting. If the exposed wires of the speakers touch the rear panel or the + and – wires touch each other, the protection circuit will be activated.

connect to other jacks. See "Points to note with speaker combinations" (*P8) for details.
(10 3/8 ̋ mm)
ᴧ ᴧ ᴧ ᴧ 1 Speaker cable, 2 Subwoofer cable
9
1>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix
1
Connections with Bi- Amping speakers
Connect front speakers compatible with Bi-Amping connection to the FRONT jacks and the HEIGHT 1 jacks. Make sure you remove the jumper bar fitted between the
(10 3/8 ̋ mm)
woofer jacks and tweeter jacks of the front speakers. In case of Bi-Amping connection, refer to the instruction manual of your speakers.
Make sure the exposed wires of the speakers do not stick out of the speaker terminals when connecting. If the exposed wires of For high-
the speakers touch the rear panel or the + and – wires touch each frequency
other, the protection circuit will be activated.
For low- frequency
1 Speaker cable >> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix Step3: Connect the TV
HDMI IN (ARC) 1
TV 1 HDMI cable
TV-1 (ARC TV)
This describes the connections for a TV that supports the ARC (Audio Return Channel) feature. By connecting with a single HDMI cable, you can not only output the video input to this unit to the TV, but you can also play the sound from the TV through this unit. Choose an HDMI IN jack on the TV that supports ARC when connecting.
Setup 0 Settings are required to use the ARC function. Select "Yes" in "5. Audio Return Channel" (*P22) in the Initial Setup. 0 Please refer to the TV's operation manual for directions on connections and setup for the TV.
Another TV or projector can be connected to the HDMI OUT SUB jack. This jack does not support ARC. For details about how to output video from the HDMI OUT SUB jack (*P23)
11
1>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix
1 2
TV 1 HDMI cable, 2 Digital optical cable
TV-2 (Non-ARC TV)
This describes the connections for a TV that does not support the ARC (Audio Return Channel) feature. By connecting with both an HDMI cable and a digital optical cable, you can not only output the video input to this unit to the TV, but you can also play the sound from the TV through this unit. If the TV doesn't have a DIGITAL OPTICAL OUT jack, use an analog audio cable and connect the TV's ANALOG AUDIO OUT jack to the AUDIO IN TV jack on this unit.
0 Connection with a digital optical cable is not necessary if you will watch TV through a device such as a cable set-top box (that is, not use a tuner built into the TV) that you have connected to the INPUT jack on this unit.
Another TV or projector can be connected to the HDMI OUT SUB jack. This jack does not support ARC. For details about how to output video from the HDMI OUT SUB jack (*P23) >> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix Step4: Connect the AV ComponentsBD/DVD
GAME
HDMI AV Components
This is an example of connection with an AV component that has an HDMI jack. With connection to an AV component that conforms with the CEC (Consumer Electronics Control) standard, you can use features such as the HDMI CEC feature that links with the input selector, and the HDMI Standby Through feature which allows you to play video and audio from AV components on the TV even when this unit is in standby mode.
0 To play 4K or 1080p video, use a high speed HDMI cable. Further, to enjoy HDCP2.2 compatible video, connect to the HDMI IN1 to IN5 jacks.
Setup 0 HDMI setup (*P22) is required to use the HDMI CEC and HDMI Standby Through features. Make settings after all connections are complete. 0 To enjoy digital surround sound including Dolby Digital, audio output should be set to "Bitstream output" on the connected Blu-ray Disc player or other device.
1
You can connect a device such as a video camera to the AUX INPUT HDMI jack on the front panel.
Streaming media
Cable/Satellite set-top player
box 1 HDMI cable
13
1>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix
OR
1
Non-HDMI AV Components
This is an example of connection with an AV component that does not have an HDMI jack. Make the connections to the AV component to match the jacks it has. When video input connection is to the BD/DVD jack, the audio input connection should also be to the BD/DVD jacks, and so on, so that you connect the video input jacks to the jacks with the same name as the audio input jacks. Note that video signals input to the VIDEO IN jack or the COMPONENT VIDEO IN jacks will be converted to HDMI video signals and then output from the HDMI OUT jack. 0 To enjoy digital surround playback in formats such as
Dolby Digital, you need to make a connection for audio signals with a digital coaxial cable or digital optical cable. 0 It is possible to change assignment of the input jacks
you see in the illustration at left, so you can also connect to any jack other than BD/DVD. For details, see the Advanced Manual.
Setup 0 The COMPONENT VIDEO IN jacks are compatible only with 480i or 576i resolution. When you input video signals to the COMPONENT VIDEO IN jacks, set the output resolution of the player to 480i or 576i. Select interlace if there is no option for 480i, etc. If your player does not support 3
2 480i or 576i output, use the VIDEO IN jack.
0 To enjoy digital surround sound including Dolby Digital, audio output should be set to "Bitstream output" on the connected Blu-ray Disc Player or other device.
BD/DVD
1 Component video cable, 2 Digital coaxial cable, 3 Analog audio cable >> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix

OR
CD
Audio Components
Example of a connection with an Audio Component. Connect a CD player using a digital optical cable or analog audio cable. You can also connect a turntable that has an MM-type cartridge to the PHONO jack.
0 If the turntable has a built-in audio equalizer, connect it
to an AUDIO IN jack other than the PHONO jack. Further, if the turntable uses an MC type cartridge, install an audio equalizer compatible with the MC type cartridge between the unit and the turntable, then connect to any AUDIO IN jack other than the PHONO jack.
If the turntable has a ground wire, connect it to the GND terminal of this unit.
1
Turntable
1 Digital optical cable, 2 Analog audio cable
2
15

1>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix
1
BD/DVD
Projector, etc.
1 Component video cable
Component Video Monitor
Use a component video cable to connect a TV or projector that has component video input jacks rather than an HDMI input jack. To output video from the COMPONENT VIDEO OUT jacks, you must connect the external AV components using a component video cable.

>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix Step5: Multi-zone Connection
TV
ZONE 2 TV
You can enjoy content from a Blu-ray Disc player on a TV equipped with an HDMI input jack in the separate room (ZONE 2) by playing a Blu-ray Disc player in the main room (where this unit is located), or play the content from another AV component. Only the video from devices connected to the HDMI IN1 to IN5 jacks can be played on the TV in the separate room.
Setup 0 Settings are required in Initial Setup, "4. Multi Zone Setup" (*P22) to enjoy this feature. 0 The audio from externally connected AV components can only be played in ZONE 2 when the audio is analog or 2ch PCM audio. It may also be necessary to convert the audio output of the AV component to PCM output. MAIN ROOM
1
1 HDMI cable
ZONE2
17
1>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix
ZONE2
ZONE 2 SPEAKER
ZONE 2 PRE/LINE OUT
ZONE 2 PRE/LINE OUT / ZONE 2 SPEAKER
You can enjoy audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2).
Connections with an AV component Connect with HDMI IN 1 to 5 if you want to output an external AV component to ZONE 2. If the AV component doesn't have an HDMI jack, connect using a digital optical cable, digital coaxial cable, or analog audio cable.
ZONE 2 PRE/LINE OUT It is possible to play 2 ch sources in a separate room while sources with a maximum of 11.1 ch are being played in the main MAIN ROOM
room. Connect the ZONE 2 PRE/LINE OUT jacks of the unit and the LINE IN jacks of the pre-main amplifier or the power amplifier in a separate room with an analog audio cable.
ZONE 2 SPEAKER It is possible to connect speakers in a separate room and play 2 ch sources.
0 You can play through a maximum of 7.1 channels in the main room during ZONE 2 playback. With Bi-Amping connection or while ZONE 3 speaker connection settings are enabled, no sound is heard from the surround back speakers or height speakers and a maximum of 5.1 channel playback is possible in the main room. Listening
LINE IN 2 ᴧ
modes such as Dolby Atmos cannot be selected.
1
Setup 0 Settings are required in Initial Setup, "4. Multi Zone Setup" (*P22) to enjoy this feature. ˎ Depending on the combination of speakers, you
may need to connect to other jacks. See "Points to note with speaker combinations" (*P8) for details.
0 The audio from externally connected AV components can only be played in ZONE 2 when the audio is analog or 2ch PCM audio. If you have connected to this unit with an HDMI cable or digital optical/coaxial cable, may be necessary to convert
1 Analog audio cable, 2 Speaker cable
the audio output of the AV component to PCM output. >> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix
1
ZONE 3 PRE/LINE OUT / ZONE 3 SPEAKER
Along with the main room and ZONE 2, you can also enjoy audio in yet another room (ZONE 3).
Connections with an AV component To output the audio of an external AV component to ZONE 3, connect using an analog audio cable. Output to ZONE 3 is not possible when you connect with an HDMI cable or digital optical/coaxial cable.
ZONE 3 PRE/LINE OUT It is possible to play 2 ch sources in a separate room while sources with a maximum of 11.1 ch are being played in the main room. Connect the ZONE 3 PRE/LINE OUT MAIN ROOM
jacks of the unit and the LINE IN jacks of the pre-main amplifier or the power amplifier in a separate room with an analog audio cable.
ZONE 3 SPEAKER It is possible to connect speakers in a separate room and play 2 ch sources.
0 During ZONE 3 playback, no sound is heard from the surround back speakers or the height speakers and a maximum of 5.1 channel playback is possible in the main room. Listening modes such as the Dolby Atmos modes cannot be selected.
LINE IN
Setup 0 Settings are required in Initial Setup, "4. Multi Zone Setup" (*P22) to enjoy this feature. ZONE3
ᴧ 2BD/DVD ˎ Depending on the combination of speakers, you
ZONE 3 SPEAKER
may need to connect to other jacks. See "Points to note with speaker combinations" (*P8) for details.
ZONE 3 PRE/LINE OUT
1 Analog audio cable, 2 Speaker cable
19
2>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix Step6: Connect Other Cables
1
Antenna Hookup
(North American models)
(European and Asian models)
Move the antenna around while playing the radio to find the position with the best reception. Use a thumb tack or similar to attach the indoor FM antenna to a wall.
Network Hookup Connect this unit to the network using wired LAN or Wi-Fi (wireless LAN). You can enjoy network features such as 2 2
internet radio, Music Server, and AirPlay by connecting the unit to the network. If you connect by wired LAN, connect with an Ethernet cable to the ETHERNET port as shown in the illustration. To connect by Wi-Fi, then after selecting "Wireless" in "3. Network Connection" (*P22) in Initial Setup, select the desired setting method and follow the onscreen instructions to configure the connection.
Power Cord Hookup This unit includes removable power cords. Connect the power cord to the power outlet after completing all other connections. Connect the power cord to AC INLET of the unit and then connect to the outlet. Always disconnect the outlet side first when disconnecting the power cord.
You can find the voltage selector switch on the rear panel of multi-voltage models. Please set it to the correct voltage for your country or region. Before changing the voltage, disconnect the power cord. Use a medium size screwdriver to change the voltage switch.
1
1 AM loop antenna, 2 Indoor FM antenna, 3 Ethernet cable, 4 Power cord
4
3 >> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix Step7: Power On & Initial Setup

Initial Setup starts automatically Switch the input on the TV to that assigned to the unit. When you turn the unit on for the first time, Initial Setup is automatically shown on the TV to enable you to make settings required for startup using simple operations following onscreen guidance.
0 If you terminate the procedure on the way or want to
change a setting made during Initial Setup, press on the remote controller, select "7. Miscellaneous" – "Initial Setup", and press ENTER.
1. AccuEQ Room Calibration
setting the crossover frequency to "80Hz(THX)". It is also recommended to manually adjust the settings for each speaker to suit the specific characteristics of each room. 0 If the power of this unit suddenly turns off, the wires in the speaker cables may have touch the rear panel or other wires and tripped the protection circuit. Twist the wires again properly and make sure they do not stick out of the speaker terminals when connecting. Setu
Place the supplied speaker setup microphone in the listening position, measure the test tones emitted by the speakers, then the unit automatically sets the optimum volume level for each speaker, the crossover frequencies, and the distance from the listening position. This also enables correction of distortion caused by the acoustic environment of the room.
SETUP MIC
0 When putting the speaker setup microphone on a tripod,
: Selection
refer to the illustration when putting it in place. 0 Set the subwoofer volume to more than halfway.
: OK
0 Calibration takes between 3 and 12 minutes to be
completed. The speakers emit the test tone at high
: Return
volume during measurement, so be careful of your surroundings. Keep the room as quiet as possible during measurement. 0 When using THX certified speakers, THX recommends
21

2>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix
2. Source Connection
Check that each input source is connected correctly. Follow the guidance, select the input you want to confirm, start play of the selected player, and confirm that the images appear on the TV and that sound is played.
3. Network Connection
Set up Wi-Fi connection with an access point such as a wireless LAN router. There are the following two methods of connecting by Wi-Fi: "Scan Networks": Search for an access point from this unit. Find out the SSID of the access point beforehand. "Use iOS Device (iOS7 or later)": Share the iOS device's Wi-Fi settings with this unit.
If you select "Scan Networks", there are a further two choices of connection method. Check the following.
0 "Enter Password": Enter the password (or key) of the
access point to connect. 0 "Push Button": If the access point has an automatic
connection button, you can connect without entering a password. 0 If the SSID of the access point is not displayed, then in
the screen listing the SSIDs, select "Other..." with the ! cursor on the remote controller and press ENTER, then follow the onscreen instructions.
Keyboard input
HDMI Setup
To switch between upper and lower case, select "A/a" on
HDMI CEC the screen and press ENTER. To select whether to mask
Make this setting to enable the control feature for devices the password with " ˎ " or display it in plain text, press
complying with the CEC standard. This is set to on MEMORY on the remote controller. Press CLR to delete all
automatically if you have selected "Yes" in "5. Audio Return the input characters.
Channel" in the Initial Setup. Press the button on the remote controller to set "5. 0 A confirmation screen asking you to agree to the privacy
Hardware" – "HDMI" – "HDMI CEC" to "On" on the TV policy is displayed during network setting. Select "Yes"
screen. Also enable the CEC control feature on the CEC and press ENTER to indicate agreement.
device you have connected.
4. Multi Zone Setup
Make these settings to enjoy video and audio in a room other than the main room (ZONE 2/ZONE 3). Select "Using AV Receiver" when connecting speakers in the separate room. Select "with External Premain Amplifier" when connecting a pre-main amplifier in the separate room. Select "with External Power Amplifier" when connecting a power amplifier. If you are going to be connecting a TV in the separate room (ZONE 2), then when "Would you be using TV in 2nd room?" is displayed, select "Yes".
HDMI Standby Through Even if this unit is in standby, the input signals from AV components are transmitted to the TV.
0 "Auto" / "Auto (Eco)": Select one of these settings
when connected AV components comply with the CEC 5. Audio Return Channel
standard. Irrespective of the input selector selected immediately before switching the unit to standby, you can transmit the input signals from AV components to the TV. If you have connected a TV that supports ARC, select
Select "Auto (Eco)" if the TV is also CEC-compliant. You "Yes". This unit's ARC setting turns on and you can listen to
can reduce power consumption in standby mode. the TV's audio through this unit.
0 Input selector names for "BD/DVD", etc.: You can 0 If you select "Yes", the HDMI CEC function is enabled
transmit the input signals from the set input selector to and power consumption increases during standby.
the TV. It can be selected when "HDMI CEC" is set to
Wi-Fi Setup
Password
"Off". 0 "Last": You can transfer the input signals of the input selector selected immediately prior to the unit being switched to standby. It can be selected when "HDMI CEC" is set to "Off". With this setting, you can switch the input selector even in the standby mode. To exit the settings, press .
When finished, select the "OK" key.
5-1 HDMI
HDMI CEC
HDMI Standby Through
Audio TV Out
Audio Return Channel
Auto Lip Sync
On
Auto(Eco)
Auto
AutoOn
a b c d e f g h i j k l m
n o p q r s t u v w x y z
1 2 3 4 5 6 7 8 9 0 - ^ \
, . / ; : @ [ ]
A/a
Ɵ ơ OK All Erase
Hide/Show A/a

>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix
Basic PlaybackAV Component Playback
1. Switch the input on the TV to that assigned to
the unit. 2. Press the input selector (a) on the remote
controller with the same name as the jack to which you connected the player to switch the input. For example, press BD/DVD to play the player connected to the BD/DVD jack. Press TV to listen the TV's sound.
0 When the CEC link function works, the input switches automatically when you have connected a CEC compliant TV and player to this unit using HDMI connection. 3. Start play on the player. 4. Use VOL+/– (b) to adjust the volume.
When a TV is connected to the HDMI OUT SUB jack Press Q on the remote controller to display the Quick Menu, and set "Other" – "HDMI Out" to either "SUB" or "MAIN+SUB".
Listening Mode
This unit is equipped with a variety of listening modes, and you can select the optimum listening mode for movies, TV, music, and games by repeatedly pressing the MOVIE/TV, MUSIC, and GAME buttons (c). You can also select THX-related listening modes by repeatedly pressing THX (d). For details on the listening modes, see the Advanced Manual. This section introduces some of the popular modes.
Dolby Digital/DTS modes When the input signal is a digital surround format such as Dolby Digital or DTS, you can
select the listening mode that suits the input signal. Dolby Digital is displayed for Dolby Digital and DTS-HD Master Audio is displayed for DTS-HD Master Audio. The output is Stereo for 2-channel input signals.
Direct This listening mode can be selected for all input signals. It shuts down processing that affects sound quality to deliver a playback sound quality closer to sources. Speakers play the sound field according to the number of channels in the input signal, so there would be output from only the front speakers for a 2 ch signal, for example.
Dolby Surround/DTS Neural:X These listening modes allow you to expand the playback signal to a maximum of 11 channel to suit the connected speaker configuration when the input signal is 2 channels or 5.1 channels.
THX surround modes Multiple surround speakers are installed in movie theaters so that the moviegoer is enveloped in a natural surround sound. Even with just two surround speakers, the THX Cinema mode achieves, with the high-quality technology developed by THX, the same kind of breadth of sound you would get in a movie theater along with the natural flow of timbre with the sound field towards the front. Also available are modes such as THX Music and THX Games.
Original surround modes You can select listening modes such as the All Ch Stereo mode where a stereo image is played from both the front and the rear, and Orchestra (only with the MUSIC button) which is best for playback of classical and opera pieces.
Pure Audio a b
Listening mode that provides purer sound quality by switching off the power of the display and analog video circuits. e
The listening mode last selected for the source is remembered for each of the MOVIE/TV, MUSIC, GAME and THX buttons. If content you play is not supported by the listening mode you selected last, the listening mode that is standard for that content is selected automatically. Press (e) repeatedly to switch the display of the main unit in order of:
d
c
Playback
Input source & volume
Listening mode
Signal format
The display changes few seconds later. Sampling frequency
Input signal resolution
23

2>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix Network Functions
Network Services
1. Switch the input on the TV to that assigned to
the unit. 2. Press NET to display the network service list
screen.
3. Select the item with the cursors of the remote
controller and press ENTER to confirm your selection (a). To return to the previous screen, press (b).
Internet Radio When this unit is connected to a network, you can listen to TuneIn or other preregistered Internet radio services. After selecting the desired service, follow the on-screen instructions, using the cursors to select radio stations and programs, then press ENTER to play. Play starts when 100% is displayed for buffering.
Music Server You can play music files stored on home- network compliant PCs or NAS devices connected to the same network as this unit. Select the server with the cursors, select the desired music file and press ENTER to start playback. Play starts when 100% is displayed for buffering.
0 This unit is compatible with Windows Media®
Player 11 or 12 network servers or NAS that are compatible with home network functionality. You may need to make some settings in advance to use Windows Media® Player 11 or 12. Enable media streaming for this player in Windows Media® Player. For details, see the Advanced Manual.
USB Play music files on a USB storage device. Connect the USB storage device to the USB jack on the rear of the unit, select the desired
a b
folder or music file with the cursors, and press ENTER to confirm and start playback.
0 Operation cannot be guaranteed for all USB
storage devices. 0 This unit can use USB storage devices that comply with the USB mass storage device class standard. The unit is also compatible with USB storage devices using the FAT16 or FAT32 file system formats.
Notes: 0 Network services become selectable after the network starts up even if they cannot be selected first. 0 Functionality may be introduced by firmware updates and service providers may cease services, meaning that some network services and content may become unavailable in the future. Furthermore, available services may vary depending on your area of residence.

>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix
AirPlay
You can wirelessly enjoy the music files on an iPhone®, iPod touch®, or iPad® connected to the same access point as this unit.
0 Update the OS version on your iOS device to the latest
version. 1. Connect the iOS device to the access point. 2. Press NET. 3. Tap the AirPlay icon in the control center of the iOS
device and select this unit from the list of devices displayed, and tap "Done". 4. Play the music files on the iOS device.
0 The default status is for the Network Standby feature to be on, so when you do steps 3 and 4 above, this unit automatically comes on and input switches to "NET". To reduce the amount of power consumed in standby mode, press the button on the remote controller, then in the Setup menu displayed set "5. Hardware" – "Power Management" – "Network Standby" to "Off". 0 Due to the characteristics of AirPlay wireless
technology, the sound produced on this unit may slightly be behind the sound played on the AirPlay-enabled device.
You can also play back music files on the computer with iTunes (Ver. 10.2 or later). Before operation, make sure this unit and the PC are connected to the same network, then press NET on this unit. Next, click the AirPlay icon in iTunes, select this unit from the list of devices displayed, and start play of a music file.
BLUETOOTH® Playback
Pairing 1. When you press the button on the remote controller,
"Now Pairing..." is displayed on this unit's display, and the pairing mode is enabled.
2. Enable (turn on) the BLUETOOTH function of the
BLUETOOTH enabled device, then select this unit from amongst the devices displayed. If a password is requested, enter "0000". 0 To connect another BLUETOOTH enabled device, press
and hold the button until "Now Pairing..." is displayed, then perform step 2 above. This unit can
0OLZP 59 9999
store the data of up to 8 paired devices. 0 The coverage area is 48 feet (15 meters). Note that
connection is not always guaranteed with all BLUETOOTH enabled devices.
Playing Back 1. When the unit is on, connect the BLUETOOTH enabled J1IPOF
device.
0OLZP 59 9999
2. The input selector of this unit will be automatically
switched to "BLUETOOTH". 3. Play music. Increase the volume of the BLUETOOTH
enabled device to an appropriate level. 0 Due to the characteristics of BLUETOOTH wireless
technology, the sound produced on this unit may slightly be behind the sound played on the BLUETOOTH enabled device.
25

2>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix Others
a
Listening To the Radio
cMulti-zone
1. Press TUNER (a) on the remote controller repeatedly to
a
Play
b
select either "AM" or "FM" on the display. 2. Press MODE (c) on the remote controller, so that the
b
"TunMode: Auto" is displayed on the display.
1. Switch the remote controller to the mode for controlling
ZONE 2 or ZONE 3. To switch to the mode for controlling ZONE 2, press 3. When you press the # / $ cursor (b) buttons on the
ZONE 2 (a) on the remote controller. remote controller, automatic tuning starts, and searching
To switch to the mode for controlling ZONE 3, press stops when a station is found. When tuned into a radio
ZONE 3 (b) on the remote controller. station, the "TUNED" indicator on the display lights.
You can preset up to 40 stations.
To return the remote controller to main room control mode: Press MAIN (c) on the remote controller. 1. Tune into the AM/FM radio station you want to register. 2. Press MEMORY (d) on the remote controller so that the
preset number on the display flashes. c
3. While the preset number is flashing (about 8 seconds),
2. Point the remote controller at the main unit and press
Í ON/STANDBY (d). d
repeatedly press the " / ! cursor (b) buttons on the remote controller to select a number between 1 and 40.
d
"Z2" or "Z3" lights on the main unit display.
e
4. Press MEMORY (d) again on the remote controller to
register the station. When registered, the preset number stops flashing. To select a preset radio station, press the
e " / ! cursor (b) buttons on the remote controller.
3. Press the input selector button (e) of the input to be 0 To delete a preset station, press the " / ! cursor (b)
played in the separate room. On the main unit, after buttons on the remote controller to select the preset
pressing ZONE 2 or ZONE 3, within 8 seconds press number you want to delete, press MEMORY (d) on the
the input selector button to select the input to be played remote controller and then press CLR (e) while the
in the separate room. To play the same source in the preset number is flashing. When deleted, the number on
main room and separate room, press ZONE 2 or ZONE the display goes off.
3 on the main unit twice.
0 You cannot select different inputs for the main room Frequency step setting
and separate room with the "NET" or "BLUETOOTH" Press the button on the remote controller to select "7.
input selector. You cannot select different stations for Miscellaneous" – "Tuner" – "AM/FM Frequency Step" or
the main room and separate room with the AM/FM "AM Frequency Step" and select the frequency step for
radio. When you select an input or station for the your area. Note that when this setting is changed, all radio
separate room, the main room also switches. presets are deleted.
0 DSD and Dolby TrueHD audio signals are not output to ZONE 2/ZONE 3 when selected with the "NET" input selector. 0 If ZONE 2 or ZONE 3 is turned on when the listening
mode of the main room is Pure Audio, it will automatically switch to the Direct listening mode. 4. To adjust the volume on the power amplifier in the

>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix
separate room or the ZONE Speaker, adjust with VOL+/– on the remote controller. To control on the main unit, press ZONE 2 or ZONE 3 and adjust with the MASTER VOLUME control within 8 seconds. 0 The information for a connected device can be displayed
on the TV screen in a separate room. Press the button while the remote controller is in the mode for controlling ZONE 2. 0 Power consumption in standby mode increases when the
multi-zone function is being used.
To turn off the function Press Í ON/STANDBY while in the mode for controlling ZONE 2 or ZONE 3 on the remote controller.
Playing in ZONE 2 or ZONE 3 only If you turn the unit to standby during multi-zone playback, the Z2 or Z3 indicator is dimmed and the playback mode is switched to playback in a separate room only. Setting ZONE 2/ZONE 3 to on while this unit is in standby will also switch the playback mode to the same setting.
WHOLE HOUSE MODE If you press WHOLE HOUSE MODE while playback is being performed in the main room, the WHOLE HOUSE MODE is turned on, "Z2" and "Z3" on the display light at the same time and the playback sources of all the rooms are switched to the same source at once.
0 The sources that can be played in ZONE 2 can be played
in all rooms. 0 This function cannot be used if headphones are
connected or audio is output from the speakers of the TV.
Settings Settings are required in Initial Setup, "4. Multi Zone Setup" (*P22) to use the multi-zone feature. When checking the setting content, refer to the following, press on the remote controller, and check in the Setup menu that is displayed.
– When you have connected a TV in the separate room
with an HDMI cable, have you selected "Use" in "1. Input/
Output Assign" – "TV Out/OSD" – "Zone2 HDMI"?
Others – When you are playing the audio from an AV component
with an HDMI cable in the separate room, have you selected "Use" in "1. Input/Output Assign" – "TV Out/ OSD" – "Zone2 HDMI"? – When you have connected speakers in a separate room with speaker cable, have you selected "Zone 2" or "Zone 2/Zone 3" in "2. Speaker" – "Configuration" – "Zone Speaker"? – When you have connected a power amplifier in a
separate room with an analog audio cable and you want to control the volume with this unit, have you selected "Variable" in "6. Multi Zone" – "Zone 2" or "Zone 3" – "Output Level"?
To adjust the sound quality It is possible to enhance or moderate the bass and treble range of all channels except the subwoofer channel. Press TONE on the main unit several times to select the desired setting from "Bass" and "Treble", and turn the TONE dial to adjust.
0 This cannot be set if the listening mode is Pure Audio,
Direct or THX. 0 You can also adjust the sound quality of a power
amplifier connected in a separate room. After pressing either ZONE 2 or ZONE 3 on the main unit, within 8 seconds press TONE and turn the TONE dial to adjust.
Quick Menu By pressing Q on the remote controller during play, you can adjust frequently used settings, such as the sound quality, using on-screen menus. Select the item with the cursors of the remote controller and press ENTER to confirm your selection. To return to the previous screen, press .
Quick Menu
Tone
Level
AccuEQ
Other
0 You can adjust the sound quality with "Tone". "Other"
includes settings such as "A/V Sync" that allows you to adjust the audio delay when the video is behind the audio, "Music Optimizer" that provides better sound quality for compressed audio, and "HDMI Out" which allows you to select the HDMI OUT terminal to output from "MAIN", "SUB", and "MAIN+SUB".
BD/DVD
Bass
Treble
27

2>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix
When the unit is operating erratically
Try restarting the unit Restarting the unit may help it operate more smoothly. To restart the unit, turn it to standby, and then press Í ON/ STANDBY on the main unit for at least 5 seconds. (The unit’s settings will be maintained.) If there is no improvement even after the unit is restarted, try disconnecting and reconnecting the power cords of the unit and connected equipment.
Resetting the unit (this resets the unit settings to the default) If restarting the unit doesn't fix the problem, resetting the unit to the status at the time of shipment may solve the problem. If you reset the unit status, your preferences will be reset to the defaults. Note them down before the operation below.
1. While pressing the CBL input selector button on the main
unit, press Í ON/STANDBY. 2. "Clear" appears on the display and the unit returns to standby. Do not unplug the power cord until "Clear" disappears from the display. To reset the remote controller, while holding down CLR, press MODE until MAIN flash twice (about 3 seconds).
When the subwoofer produces no sound
If the setting of the front speakers is "Full Band" and during 2ch input such as from the TV or music, the low range elements will be output from the front speakers rather than from the subwoofer. If you would rather output from the subwoofer, make one of the following settings. 1. Change the front speakers settings to a setting other
than "Full Band" for the crossover frequency value. The range below the frequency you specify will be output from the subwoofer rather than the front speakers. We do not recommend changing this if your front speakers have good low range reproduction capabilities. 2. Change "Double Bass" to "On".
The low range elements will be output from both the front speakers and the subwoofer. This may mean that there is too much bass. Do not change if this happens, or choose option 1. Refer to "Setup Menu" ɻ "Crossover" in the Advanced Manual for details.

>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix Front Panel

1. Í ON/STANDBY button: Turns the unit on or into
standby mode. 2. PURE AUDIO button/indicator: Switches the unit to Pure
Audio mode. (*P23) 3. HYBRID STANDBY indicator: Lights if the unit enters standby mode when the features are enabled that continue to work when this unit is in standby, such as HDMI Standby Through and Network Standby. 4. Display (*P30) 5. Remote control sensor 6. Input selector buttons: Press the following buttons to
switch the input to be played. The jack allocated to the buttons at the time of purchase are shown inside the parentheses ( ).
BD (BD/DVD)
CBL (CBL/SAT) GAM (GAME) STM (STRM BOX) PC (PC) AUX (AUX INPUT HDMI) CD (CD) TV (TV) PHN (PHONO) TUN: AM/FM Radio NET: Playing the Internet Radio, USB, etc.
: BLUETOOTH function 7. ZONE 2/ZONE 3 buttons: Controls the multi-zone
function. (*P26) OFF button: Switches the multi-zone function off. 8. MASTER VOLUME: Allows you to adjust the volume.
9. (Up) LISTENING MODE button / (Down) LISTENING
9. (Up) LISTENING MODE button / (Down) LISTENING
MODE dial: Allows you to select the listening mode. Press the button repeatedly to select a category from "Movie/TV", "Music", "Game", then turn the dial to change the mode. (*P23) 10.(Up) TONE button / (Down) TONE dial: Adjusts the high tone and low tone. Press the button repeatedly to select the item to adjust from "Bass" and "Treble", and turn the dial to adjust. 11.Front flap 12.SLEEP button: Set the sleep timer. Select from "30
MODE dial: Allows you to select the listening mode. Press the button repeatedly to select a category from "Movie/TV", "Music", "Game", then turn the dial to change the mode. (*P23) 10.(Up) TONE button / (Down) TONE dial: Adjusts the high tone and low tone. Press the button repeatedly to select the item to adjust from "Bass" and "Treble", and turn the dial to adjust. 11.Front flap 12.SLEEP button: Set the sleep timer. Select from "30
MODE dial: Allows you to select the listening mode. Press the button repeatedly to select a category from "Movie/TV", "Music", "Game", then turn the dial to change the mode. (*P23) 10.(Up) TONE button / (Down) TONE dial: Adjusts the high tone and low tone. Press the button repeatedly to select the item to adjust from "Bass" and "Treble", and turn the dial to adjust. 11.Front flap 12.SLEEP button: Set the sleep timer. Select from "30
MODE dial: Allows you to select the listening mode. Press the button repeatedly to select a category from "Movie/TV", "Music", "Game", then turn the dial to change the mode. (*P23) 10.(Up) TONE button / (Down) TONE dial: Adjusts the high tone and low tone. Press the button repeatedly to select the item to adjust from "Bass" and "Treble", and turn the dial to adjust. 11.Front flap 12.SLEEP button: Set the sleep timer. Select from "30
minutes", "60 minutes", and "90 minutes". 13.PHONES jack: Stereo headphones with a standard plug
minutes", "60 minutes", and "90 minutes". 13.PHONES jack: Stereo headphones with a standard plug
minutes", "60 minutes", and "90 minutes". 13.PHONES jack: Stereo headphones with a standard plug
(1/4 inch or ø6.3 mm) are connected. 14.MUSIC OPTIMIZER button: Turns on/off the Music
(1/4 inch or ø6.3 mm) are connected. 14.MUSIC OPTIMIZER button: Turns on/off the Music
(1/4 inch or ø6.3 mm) are connected. 14.MUSIC OPTIMIZER button: Turns on/off the Music
1 2 3 4 5 6 7 9 10 11 12 13 14 15 1716 18 19 20 2122 23 24 25 26 8
Part Names
11
29

3>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix
Optimizer function that provides better sound quality for compressed audio. 15.HDMI OUT button: Allows you to select the HDMI OUT jack to output video signals from "MAIN", "SUB", and "MAIN+SUB". 16.INFO button: Switches the information on the display. 17.SETUP button: Displays the Setup menu. 18.QUICK MENU button: You can perform common settings
on the TV screen. (*P27) 19.Cursor buttons (TUNING4 3 / PRESET2 1 button)
and ENTER button: Select the item with the cursors and press ENTER to confirm your selection. When using the TUNER, select the frequency with TUNING4 3, or select preset stations with PRESET2 1. 20.RETURN button: Returns the display to the previous
state. 21.DIMMER button: You can adjust the brightness of the
display in three steps. It cannot be turned off completely. 22.MEMORY button: Used to register AM/FM radio stations. 23.AUX INPUT HDMI jack: Connect to a video camera, etc.,
using a HDMI cable. 24.SETUP MIC jack: The supplied speaker setup
microphone is connected. 25.TUNING MODE button: Switches the tuning mode. 26.WHOLE HOUSE MODE button: Enables the WHOLE
HOUSE MODE function to play the same source in all the multi-zone connected rooms. (*P27)
Display
1 2 3 4
57 6 7 1. Speaker/Channel display: Displays the output channel that
corresponds to the selected listening mode. 2. Lights in the following conditions.
Ë: When headphones are connected. Z2/Z3: When ZONE 2/ZONE 3 is on.
: When connected by BLUETOOTH. : When connected by Wi-Fi. NET: When "NET" is selected with the input selector and the unit is connected to the network. It will flash if the connection to the network is not correct. USB: When "NET" is selected with the input selector and the unit is connected by USB and the USB device is selected. Flashes if the USB is not properly connected. HDMI: When HDMI signals are input and the HDMI input is selected. DIGITAL: When digital signals are input and the digital input is selected. 3. Lights according to the type of input digital audio signals and the
listening mode. 4. Lights in the following conditions.
RDS (European and Asian models): Receiving RDS broadcasting. TUNED: Receiving AM/FM radio. FM ST: Receiving FM stereo. SLEEP: When the sleep timer is set. AUTO STBY: When Auto Standby function is enabled. 5. Flashes when muting is on. 6. Displays various information of the input signals. Characters that
cannot be displayed on this unit are replaced with asterisks ( ˎ ).
0 When playing back software which has been encoded in Dolby Digital,
Dolby Digital Plus, Dolby TrueHD and Dolby Atmos, sometimes you may see a brief message which will read "DialogNorm: X dB" (X being a numeric value). For example, if you see the following message: "DialogNorm:+4dB", to keep the overall output level at THX calibrated loudness, just turn down the volume control by 4dB. 7. Lights when operating the "NET" input selector indicating remote controller
cursor operations are possible in screens showing list of tracks, for example.

>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix Rear Panel
1 2 3 4 5 6 7 8
19
1. COMPONENT VIDEO IN/OUT jacks: Transfer the video
signals of an AV component with a component video cable. 2. ZONE 2/ZONE 3 PRE/LINE OUT jacks: Output audio
signals with an analog audio cable to a pre-main amplifier or a power amplifier in a separate room (ZONE 2/ZONE 3). (*P18, 19) 3. HDMI IN jacks: Transmit video signals and audio signals
with a HDMI cable connected to an AV component. 4. VIDEO IN jacks: Input the video signals from AV
components with an analog video cable. 5. AUDIO IN jacks: Input TV or AV component audio
signals with an analog audio cable. 6. GND terminal: The ground wire of the turntable is connected. 7. HDMI OUT jacks: Transmit video signals and audio
signals with a HDMI cable connected to a monitor such
9 10 11 12 13 14
15 16 17 18 11
as a TV or projector. 8. ETHERNET port: Connect to the network with an
Ethernet cable. 9. USB port: A USB storage device is connected so that music files stored in it can be played. You can also supply power (maximum 5V/1A) to USB devices with a USB cable. 10.DIGITAL IN OPTICAL/COAXIAL jacks: Input the digital
audio signals from TV or AV components with a digital optical cable or digital coaxial cable. 11.Wireless antenna: Used upright for Wi-Fi connection or
when using a BLUETOOTH enabled device. The diagram shows the movable range for the wireless antenna. Do not try to force it beyond this range otherwise you may break it. 12.AC INLET: The supplied power cord is connected.
13.RS232 port: For connection to the home control system. 14.12V TRIGGER OUT jacks: Allows you to connect a
device with 12V trigger input jack to enable link operation between the device and the unit. 15.IR IN port: Allows you to connect a multiroom remote
control kit. 16.TUNER AM/FM 75Ω terminal: The supplied antennas
are connected. 17.SPEAKERS terminals: Connect speakers with speaker cables.
(North American models are compatible with banana plugs.) 18.SUBWOOFER PRE OUT jacks: Connect a powered
subwoofer with a subwoofer cable. Up to two powered subwoofers can be connected. You can set the volume levels of the 2 powered subwoofers to different levels. 19.PRE OUT jacks: Connect a power amplifier.
31

3>> Before start>> Hookup>> Setup>> Playback>> Part Names>> Advanced Manual
Troubleshooting | Appendix Remote Controller
1. Í ON/STANDBY button: Turns the unit on or into standby mode. 12. Input selector buttons: Switches the input to be played.
3. CH ▲ / ▼ buttons: Adjust the volume level of the speaker. Press CH several times to select the speakers, then press ▲ / ▼ to adjust the level. 24. button: Switches the information on the display.
5. Cursor buttons and ENTER button: Select the item with the
cursors and press ENTER to confirm your selection. 6. button: Displays the Setup menu. 7. Q (QUICK MENU) button: You can perform common settings on
the TV screen. (*P27) 8. button: You can start repeat play of the Music Server or USB. 39. Play buttons: You can start play of the Music Server or USB. 410.MEMORY button: Used to register AM/FM radio stations.
11.LISTENING MODE buttons: Allows you to select the listening 5mode. (*P23)
12.Numbered buttons 613.D.TUN button: Use to directly input the frequency of AM/FM 781415161718
1920stations when tuning. 2114.DIMMER button: You can adjust the brightness of the display in
three steps. It cannot be turned off completely. 915.MAIN/ZONE 2/ZONE 3 buttons: Controls the multi-zone function.
(*P26) 102216.TONE ▲ / ▼ buttons: Adjusts the treble and bass. Press TONE
several times to select the item you want to adjust from "Bass" 11and "Treble", then press ▲ / ▼ to adjust the level.
17.SLEEP button: Set the sleep timer. Select from "30 minutes", "60
minutes", and "90 minutes". 1218.Volume buttons: Allows you to adjust the volume. This button
also cancels the muting. 19. button: Temporarily mutes audio. Press again to cancel
13
23muting.
20. button: Returns the display to the previous state. 21. button: You can start random play of the Music Server or
USB. 22.MODE button: Switches tuning to an AM/FM station between
automatic tuning and manual tuning. 23.CLR button: Deletes all characters you have entered when
entering text on the TV screen.
30°
30°
Approx.5 m (16 ft.)
License and Trademark Information
Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, and the double-D symbol are trademarks of Dolby Laboratories.
AirPlay, iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
iPad Air and iPad mini are trademarks of Apple Inc.
Ihren lokalen Behörden.
Onkyo Corporation garandeert niet de BLUETOOTH compatibiliteit tussen de AV-receiver en alle BLUETOOTH apparaten. Raadpleeg voor compatibiliteit tussen de AV-receiver en een ander apparaat met BLUETOOTH technologie de documentatie van het apparaat of de verkoper. In sommige landen geldt mogelijk een beperking op het gebruik van BLUETOOTH apparatuur. Controleer de wetgeving in het land van gebruik.
Onkyo Corporation garandeert niet de BLUETOOTH compatibiliteit tussen de AV-receiver en alle BLUETOOTH apparaten. Raadpleeg voor compatibiliteit tussen de AV-receiver en een ander apparaat met BLUETOOTH technologie de documentatie van het apparaat of de verkoper. In sommige landen geldt mogelijk een beperking op het gebruik van BLUETOOTH apparatuur. Controleer de wetgeving in het land van gebruik.
Onkyo Corporation garanterar inte BLUETOOTH kompatibilitet mellan AV- receiver och alla BLUETOOTH aktiverade enheter. För kompatibilitet mellan AV-receiver och en annan enhet med BLUETOOTH teknik, se enhetens dokumentation och återförsäljaren. I vissa länder kan det finnas begränsningar för användandet av BLUETOOTH enheter. Kontrollera hos de lokala myndigheterna.
Onkyo Corporation garanterar inte BLUETOOTH kompatibilitet mellan AV- receiver och alla BLUETOOTH aktiverade enheter. För kompatibilitet mellan AV-receiver och en annan enhet med BLUETOOTH teknik, se enhetens dokumentation och återförsäljaren. I vissa länder kan det finnas begränsningar för användandet av BLUETOOTH enheter. Kontrollera hos de lokala myndigheterna.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
THX and the THX logo are trademarks of THX Ltd., registered in the U.S. and other countries. U.S. Pat. nos. 7,254,239 & 7,593,533 & 7,974,425 & 8,452,028 & 8,509,457 Taiwan Pat. I238671 European Pat. 1,360,874
“Made for iPod”, “Made for iPhone” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, iPhone or iPad may affect wireless performance.
AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion or later, and PC with iTunes 10.2.2 or later.
Onkyo Corporation garanterar inte BLUETOOTH kompatibilitet mellan AV- receiver och alla BLUETOOTH aktiverade enheter. För kompatibilitet mellan AV-receiver och en annan enhet med BLUETOOTH teknik, se enhetens dokumentation och återförsäljaren. I vissa länder kan det finnas begränsningar för användandet av BLUETOOTH enheter. Kontrollera hos de lokala myndigheterna.
Εϭλϟ΍ Ε΍έΎη· ϝΑϘΗγϣ ϥϳΑ %/8(7227+ ΙϭΗϭϠΑϟ΍ ςΎ πΎ΍ϭΗ ΩϭΟϭ 2QN\R ϥϣοΗ ϻ %/8(7227+ ΙϭΗϭϠΑϟΎΑ ΓΩϭίϣϟ΍ ΓίϬΟϷ΍ ϊϳϣΟϭ Γέϭλϟ΍ϭ ΙϭΗϭϠΑϟΎΑ Ωϭίϣ έΧ΁ ίΎϬΟ ρ΃ϭ Γέϭλϟ΍ϭ Εϭλϟ΍ Ε΍έΎη· ϝΑϘΗγϣ ϥϳΑ πΎ΍ϭΗϟ΍ ϯΩϣ κϠϋ θέόΗϠϟ ϥϭϛΗ Ωϗ ˬϝϭΩϟ΍ νόΑ ςΎ ϝϳϛϭϟ΍ ϝ ́γ΍ ϭ΃ ίΎϬΟϠϟ ΔϘΎ΍έϣϟ΍ π΋ΎΛϭϟ΍ ΔόΟ΍έϣΑ ϡϗ ˬ %/8(7227+ ΔϳϠΣϣϟ΍ ΕΎρϠγϟ΍ ϊΟ΍έ %/8(7227+ ΙϭΗϭϠΑϟΎΑ ΓΩϭίϣϟ΍ ΓίϬΟϷ΍ ϡ΍ΩΧΗγ΍ κϠϋ Ε΍ΩϳϳϘΗ ϙΎϧϫ
Εϭλϟ΍ Ε΍έΎη· ϝΑϘΗγϣ ϥϳΑ %/8(7227+ ΙϭΗϭϠΑϟ΍ ςΎ πΎ΍ϭΗ ΩϭΟϭ 2QN\R ϥϣοΗ ϻ %/8(7227+ ΙϭΗϭϠΑϟΎΑ ΓΩϭίϣϟ΍ ΓίϬΟϷ΍ ϊϳϣΟϭ Γέϭλϟ΍ϭ ΙϭΗϭϠΑϟΎΑ Ωϭίϣ έΧ΁ ίΎϬΟ ρ΃ϭ Γέϭλϟ΍ϭ Εϭλϟ΍ Ε΍έΎη· ϝΑϘΗγϣ ϥϳΑ πΎ΍ϭΗϟ΍ ϯΩϣ κϠϋ θέόΗϠϟ ϥϭϛΗ Ωϗ ˬϝϭΩϟ΍ νόΑ ςΎ ϝϳϛϭϟ΍ ϝ ́γ΍ ϭ΃ ίΎϬΟϠϟ ΔϘΎ΍έϣϟ΍ π΋ΎΛϭϟ΍ ΔόΟ΍έϣΑ ϡϗ ˬ %/8(7227+ ΔϳϠΣϣϟ΍ ΕΎρϠγϟ΍ ϊΟ΍έ %/8(7227+ ΙϭΗϭϠΑϟΎΑ ΓΩϭίϣϟ΍ ΓίϬΟϷ΍ ϡ΍ΩΧΗγ΍ κϠϋ Ε΍ΩϳϳϘΗ ϙΎϧϫ
Εϭλϟ΍ Ε΍έΎη· ϝΑϘΗγϣ ϥϳΑ %/8(7227+ ΙϭΗϭϠΑϟ΍ ςΎ πΎ΍ϭΗ ΩϭΟϭ 2QN\R ϥϣοΗ ϻ %/8(7227+ ΙϭΗϭϠΑϟΎΑ ΓΩϭίϣϟ΍ ΓίϬΟϷ΍ ϊϳϣΟϭ Γέϭλϟ΍ϭ ΙϭΗϭϠΑϟΎΑ Ωϭίϣ έΧ΁ ίΎϬΟ ρ΃ϭ Γέϭλϟ΍ϭ Εϭλϟ΍ Ε΍έΎη· ϝΑϘΗγϣ ϥϳΑ πΎ΍ϭΗϟ΍ ϯΩϣ κϠϋ θέόΗϠϟ ϥϭϛΗ Ωϗ ˬϝϭΩϟ΍ νόΑ ςΎ ϝϳϛϭϟ΍ ϝ ́γ΍ ϭ΃ ίΎϬΟϠϟ ΔϘΎ΍έϣϟ΍ π΋ΎΛϭϟ΍ ΔόΟ΍έϣΑ ϡϗ ˬ %/8(7227+ ΔϳϠΣϣϟ΍ ΕΎρϠγϟ΍ ϊΟ΍έ %/8(7227+ ΙϭΗϭϠΑϟΎΑ ΓΩϭίϣϟ΍ ΓίϬΟϷ΍ ϡ΍ΩΧΗγ΍ κϠϋ Ε΍ΩϳϳϘΗ ϙΎϧϫ
PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission.
THX Select2 Plus Before any home theater component can be THX Select2 Plus certified, it must pass a rigorous series of quality and performance tests. Only then can a product feature the THX Select2 Plus logo, which is your guarantee that the Home Theater products you purchase will give you superb performance for many years to come. THX Select2 Plus requirements define hundreds of parameters, including power amplifier performance, and integrated amplifier performance and operation for both digital and analog domains. THX Select2 Plus receivers also feature proprietary THX technologies (e.g., THX Mode) which accurately translate movie soundtracks for home theater playback.
Re-Equalization and the “Re-EQ” logo are trademarks of THX Ltd.
The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo Corporation is under license. Other trademarks and trade names are those of their respective owners.
Onkyo Corporation does not guarantee BLUETOOTH compatibility between the AV receiver and all BLUETOOTH enabled devices. For compatibility between the AV receiver and another device with BLUETOOTH technology, consult the device’s documentation and dealer. In some countries, there may be restrictions on using BLUETOOTH devices. Check with your local authorities.
The product with this logo is conformed to Hi-Res Audio standard defined by Japan Audio Society. This logo is used under license from Japan Audio Society.
The product with this logo is conformed to Hi-Res Audio standard defined by Japan Audio Society. This logo is used under license from Japan Audio Society.
This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft.
This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft.
This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft.
“VLSC” and “VLSC (logo)” are trademarks of Onkyo Corporation.
Onkyo Corporation ne garantit pas la compatibilité BLUETOOTH entre l'ampli- tuner AV et tous les appareils compatibles BLUETOOTH. Pour assurer la compatibilité entre l'ampli-tuner AV et un autre périphérique à technologie BLUETOOTH, consultez la documentation de l'appareil et le vendeur. Dans certains pays, il peut exister des restrictions sur l'utilisation d'appareils BLUETOOTH. Vérifiez auprès des autorités locales.
Windows and the Windows logo are trademarks of the Microsoft group of companies.
QR Code is a registered trademark of DENSO WAVE INCORPORATED.
“x.v.Color” and “x.v.Color” logo are trademarks of Sony Corporation.
“x.v.Color” and “x.v.Color” logo are trademarks of Sony Corporation.
®
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Onkyo Corporation no garantiza la compatibilidad BLUETOOTH entre el receptor de AV y todos los dispositivos con tecnología BLUETOOTH. Para obtener información sobre la compatibilidad entre el receptor de AV y otro dispositivo con tecnología BLUETOOTH, consulte al distribuidor y la documentación del dispositivo. En algunos países, es posible que el uso de dispositivos BLUETOOTH esté restringido. Consulte con las autoridades locales.
DSD and the Direct Stream Digital logo are trademarks of Sony Corporation.
DSD and the Direct Stream Digital logo are trademarks of Sony Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
AccuEQ, Music Optimizer, RIHD and WRAT are trademarks of Onkyo Corporation.
AccuEQ, Music Optimizer, RIHD and WRAT are trademarks of Onkyo Corporation.
The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance®.
Apple, Apple TV and Safari are trademarks of Apple Inc., registered in the U.S. and other countries.
Onkyo Corporation non garantisce la compatibilità BLUETOOTH tra il ricevitore AV e tutti i dispositivi abilitati al BLUETOOTH. Per verificare la compatibilità tra il ricevitore AV e un altro dispositivo dotato di tecnologia BLUETOOTH, consultare la documentazione del dispositivo in questione o contattare il rivenditore. In alcuni Paesi potrebbero esistere delle limitazioni per l'utilizzo di dispositivi BLUETOOTH. Verificare le condizioni con le autorità locali.
“All other trademarks are the property of their respective owners.”
“Toutes les autres marques commerciales sont la propriété de leurs détenteurs respectifs.”
“El resto de marcas comerciales son propiedad de sus respectivos propietarios”.
“El resto de marcas comerciales son propiedad de sus respectivos propietarios”.
Onkyo Corporation garantiert nicht die BLUETOOTH Kompatibilität zwischen dem AV-Receiver und allen BLUETOOTH fähigen Geräten. Zur Kompatibilität zwischen dem AV-Receiver und einem anderen Gerät mit BLUETOOTH Technologie, schauen Sie in die Dokumentation des Geräts und fragen Sie den Händler. Es kann sein, dass es in einigen Ländern Beschränkungen zur Nutzung der BLUETOOTH Geräte gibt. Prüfen Sie das bei
“Tutti gli altri marchi di fabbrica sono di proprietà dei rispettivi proprietari.”
“Alle anderen Warenzeichen sind das Eigentum ihrer jeweiligen Eigentümer.”
“Alle andere handelsmerken zijn eigendom van de desbetreffende rechthebbenden.”
33

34
“Alla andra varumärken tillhör deras respektive ägare.” DISCLAIMER

ϥϳϳϧόϣϟ΍ ΎϬΑΎΣλϷ ΔϛϭϠϣϣ ϯέΧϷ΍ ΔϳέΎΟΗϟ΍ ΕΎϣϼόϟ΍ ϊϳϣΟ
Through this device you are able to link to other services or websites which are not under the control of any company which has designed, manufactured or distributed/have distributed this device, and its affiliates (collectively, “Company”). We have no control over the nature, content and availability of those services. The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them. All information, content and services available through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws of applicable countries. The information, content and services provided through this device are for your personal, noncommercial use only. Any information, content or services may not be used in any manner other than previously approved by the appropriate content owner or service provider. You may not modify, copy, republish, translate, exploit, create derivative works, upload, post, transmit, sell or distribute in any manner any information, content or services available through this device, unless expressly permitted by the appropriate copyright, patent, trademark and/or other intellectual property owner, including, without limitation, content owner or service provider. THE CONTENT AND SERVICES AVAILABLE THROUGH THIS DEVICE ARE PROVIDED “AS IS”. COMPANY DOES NOT WARRANT INFORMATION, CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE. COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Company makes no representation or warranty of any kind, express or implied, about the completeness, accuracy, validity, legality, reliability, suitability or availability with respect to the information, content or services available through this device. Company shall not be liable, whether in contract or tort, including negligence and strict liability, for any direct, indirect, special, incidental or consequential damages or any other damages arising out of, or in connection with, any information contained in, or as a result of the use of any content or service by you or any third party, even if Company has been advised of the possibility of such damages, nor shall Company be liable for any third party claims against users of this device or any third party. In no event shall Company be responsible nor liable for, without limiting the generality of the foregoing, any interruption or suspension of any information, content or service available through this device. Company is neither responsible nor liable for customer service related to the information, content and services available through this device. Any question or request for service relating to the information, content or services should be made directly to the appropriate content owners and services providers.

35
1-10-5 Yokoami, Sumida-ku, Tokyo 130-0015 JAPAN http://www.onkyo.com/ < Unit 1033, 10/F, Star House, No 3, Salisbury Road, Tsim Sha Tsui Kowloon, Hong Kong. < 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: +852-2429-3118 Fax: +852-2428-9039 http://www.hk.onkyo.com/
For Dealer, Service, Order and all other Business Inquiries: < Tel: 201-785-2600 Fax: 201-785-2650
302, Building 1, 20 North Chaling Rd., Xuhui District, Shanghai, China 200032, http://www.us.onkyo.com/
Tel: +86-21-52131366 Fax: +86-21-52130396
For Product Support Team Only:
http://www.cn.onkyo.com/
1-800-229-1687 < http://www.us.onkyo.com/
Please contact an Onkyo distributor referring to Onkyo SUPPORT site. <
http://www.intl.onkyo.com/support/
Gutenbergstrasse 3, 82178 Puchheim, Germany Tel: +49-8142-4401-0 Fax: +49-8142-4208-213 http://www.eu.onkyo.com/ < Anteros Building, Odyssey Business Park, West End Road, South Ruislip, Middlesex,
The above-mentioned information is subject to change without prior notice. Visit the Onkyo web site for the latest update. HA4 6QQ United Kingdom Tel: +44 (0)871-200-1996 Fax: +44 (0)871-200-1995 For Product Support only: +44 (0)208-836-3510 http://www.uk.onkyo.com/en/ < 6, Avenue de Marais F - 95816 Argenteuil Cedex FRANCE For Product Support only: +33 969 368 138 http://www.fr.onkyo.com/fr/
F1710-2 (C) Copyright 2016 Onkyo & Pioneer Corporation Japan. All rights reserved.
Printed in Malaysia / Imprimé en Malaisie / Напечатано в Малайзии
SN 29402415B
http://www.onkyo.com/privacy/
* 2 9 4 0 2 4 1 5 B * >> Advanced Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix AV TX-RZ1100 RECEIVER Advanced Manual
Specifications Main features ........................................................................... 2 General Specifications............................................................. 3 About HDMI ............................................................................. 5 Settings Setup Menu ............................................................................. 6 Initial Setup ............................................................................ 28 Quick Menu ........................................................................... 30 Control Function Settings ...................................................... 32 Connecting a Power Amplifier ............................................... 33 Firmware Update ................................................................... 34 Listening Modes Selecting Listening Modes..................................................... 37 Listening Mode Effects .......................................................... 38 Selectable Listening Modes................................................... 42 Playback Function AM/FM radio .......................................................................... 56 USB Storage Device.............................................................. 58 Internet Radio ........................................................................ 60 Spotify.................................................................................... 62 Music Server.......................................................................... 63 Other Functions ..................................................................... 66 Supplementary information for player functions .................... 67 Troubleshooting ������������������������������������������������������������������ 68 Appendix ������������������������������������������������������������������������������ 74
The Basic Manual includes information needed when starting up and also instructions for frequently used operations. The Advanced Manual has more detailed information and advanced settings.
2>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Main features
This unit is connected between your TV and your AV components. To play, select the source with the input selector. This unit has a 9 ch amplifier plus pre out jack for powered subwoofer.
• Conforms to the THX Select2 Plus specification: THX is a series of specifications for the accurate reproduction of movies propounded by the film director George Lucas. This unit is equipped with a variety of THX technology to faithfully reproduce according to the sound design envisaged by the movie producer, including surround modes that take account of factors such as the size and number of speakers, and the differences in environments between home theaters and movie theaters.
• Supports playback in Dolby Atmos format and has Dolby Surround listening mode
• Supports playback in DTS:X format and has DTS Neural:X listening mode
• The HDMI jack supports 4K video input and output. Jacks IN1 to 5 and OUT MAIN/SUB support HDCP2.2
• HDMI CEC functionality: Control features such as linking input switching with the input selector and players conforming to the CEC standard, switching audio output and volume using the remote controller of a CEC-compliant TV, and automatically switching this unit to standby when the TV is turned off
• HDMI Standby Through: Video and audio signals from AV components can be transmitted to the TV even if this unit is in standby
• ARC: Connection with an ARC-compatible TV is complete with one HDMI cable
• Easy Initial Setup using onscreen guidance and On- Screen Display (OSD) showing operations on the TV
• Internet radio and AirPlay via wired LAN or Wi-Fi (wireless LAN) and network features such as Music Server that enables PC music file playback, USB
playback, plus other playback features such as AM/FM radio and BLUETOOTHR play
• Playback formats supported by Music Server and USB include WAV, FLAC and DSD high-res source
• Multi-zone Connection which allows you to play in the main room and listen in a separate room (ZONE 2/ ZONE 3)
• Equipped with RS232 port, IR IN jack, and 12V TRIGGER OUT jack >> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix

General Specifications
±10 dB, 100 Hz (BASS) ±10 dB, 10 kHz (TREBLE) Signal to Noise Ratio
108 dB (IHF-A, LINE IN, SP OUT) 90 dB (IHF-A, PHONO IN, SP OUT) Speaker Impedance
̇BLUETOOTH Section
Communication system
Communication system
BLUETOOTH Specification version 4.1+LE Frequency band
BLUETOOTH Specification version 4.1+LE Frequency band
BLUETOOTH Specification version 4.1+LE Frequency band
2.4 GHz band Modulation method
̇Amplifier Section
4 Ω - 16 Ω Headphone Output Impedance
2.4 GHz band Modulation method
FHSS (Freq Hopping Spread Spectrum) Compatible BLUETOOTH profiles
FHSS (Freq Hopping Spread Spectrum) Compatible BLUETOOTH profiles
Rated Output Power (FTC) (North American)
With 8 ohm loads, both channels driven, at 1 kHz; rated 140 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. Surround Mode Output Power (*) (6 ohms, 1 kHz THD 0.9%) 200 W per channel * Reference output for each speakers.
Depending on the source and the listening mode settings, there may be no sound output. Rated Output Power (IEC) (Others)
9 ch × 200 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD Maximum Effective Output Power (JEITA) (Asian and Australian)
9 ch × 320 W at 4 ohms, 1 kHz, 1 ch driven of 10% THD Dynamic Power (*)
* IEC60268-Short-term maximum output power
320 W (3 Ω, Front) 270 W (4 Ω, Front) 160 W (8 Ω, Front) THD+N (Total Harmonic Distortion+Noise)
0.04% (1 kHz, 100 W) Input Sensitivity and Impedance (1 kHz, 100 W/8 Ω)
200 mV/82 kΩ (LINE (Unbalance)) 3.5 mV/47 kΩ (PHONO MM) Rated RCA Output Level and Impedance
1 V/330 Ω (PRE OUT) 1 V/330 Ω (SUBWOOFER PRE OUT) 200 mV/1.2 kΩ (ZONE LINE OUT) 2 V/1.2 kΩ (ZONE PRE OUT) Phono Overload
70 mV (MM 1 kHz 0.5%) Tone Control Characteristics
43 Ω Headphone Rated Output
57 mW (32 Ω, 1 kHz, 10% THD)
̇Video Section
Signal level
1 Vp-p/75 Ω (Composite Video) 1 Vp-p/75 Ω (Component Video Y) 0.7 Vp-p/75 Ω (Component Video PB/PR) Maximum resolution supported by component video
1080i (*) * When output from HDMI, only 480i/576i resolution
input is possible.
̇Tuner Section
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz (North American) 87.5 MHz - 108.0 MHz, RDS (Others) AM Tuning Frequency Range
530 kHz - 1710 kHz (North American) 522/530 kHz - 1611/1710 kHz (Others) Preset Channel
40
̇Network Section
Ethernet LAN
10BASE-T/100BASE-TX Wireless LAN
IEEE 802.11 a/b/g/n standard (Wi-FiR standard) 5 GHz/2.4 GHz band
FHSS (Freq Hopping Spread Spectrum) Compatible BLUETOOTH profiles
FHSS (Freq Hopping Spread Spectrum) Compatible BLUETOOTH profiles
A2DP 1.2 AVRCP 1.3 HOGP-Host (Client) HOGP-HID Device (Server) HID Service (HIDS) Supported Codecs
A2DP 1.2 AVRCP 1.3 HOGP-Host (Client) HOGP-HID Device (Server) HID Service (HIDS) Supported Codecs
A2DP 1.2 AVRCP 1.3 HOGP-Host (Client) HOGP-HID Device (Server) HID Service (HIDS) Supported Codecs
A2DP 1.2 AVRCP 1.3 HOGP-Host (Client) HOGP-HID Device (Server) HID Service (HIDS) Supported Codecs
A2DP 1.2 AVRCP 1.3 HOGP-Host (Client) HOGP-HID Device (Server) HID Service (HIDS) Supported Codecs
A2DP 1.2 AVRCP 1.3 HOGP-Host (Client) HOGP-HID Device (Server) HID Service (HIDS) Supported Codecs
SBC AAC Transmission range (A2DP)
SBC AAC Transmission range (A2DP)
SBC AAC Transmission range (A2DP)
SBC AAC Transmission range (A2DP)
20 Hz - 20 kHz (Sampling frequency 44.1 kHz) Maximum communication range
20 Hz - 20 kHz (Sampling frequency 44.1 kHz) Maximum communication range
20 Hz - 20 kHz (Sampling frequency 44.1 kHz) Maximum communication range
20 Hz - 20 kHz (Sampling frequency 44.1 kHz) Maximum communication range
Line of sight approx. 15 m (*) * The actual range will vary depending on factors
Line of sight approx. 15 m (*) * The actual range will vary depending on factors
Line of sight approx. 15 m (*) * The actual range will vary depending on factors
such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc.
such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc.
such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc.
such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc.
such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc.
̇General
̇General
Power Supply
Power Supply
Power Supply
AC 120 V, 60 Hz (North American) AC 220 - 230 V, 50/60 Hz (European, Australian and Chinese) AC 220 - 230/240 V, 50/60 Hz (Others) Power Consumption
AC 120 V, 60 Hz (North American) AC 220 - 230 V, 50/60 Hz (European, Australian and Chinese) AC 220 - 230/240 V, 50/60 Hz (Others) Power Consumption
AC 120 V, 60 Hz (North American) AC 220 - 230 V, 50/60 Hz (European, Australian and Chinese) AC 220 - 230/240 V, 50/60 Hz (Others) Power Consumption
AC 120 V, 60 Hz (North American) AC 220 - 230 V, 50/60 Hz (European, Australian and Chinese) AC 220 - 230/240 V, 50/60 Hz (Others) Power Consumption
AC 120 V, 60 Hz (North American) AC 220 - 230 V, 50/60 Hz (European, Australian and Chinese) AC 220 - 230/240 V, 50/60 Hz (Others) Power Consumption
320 W 0.15 W (Stand-by, North American) 0.2 W (Stand-by, Others) 100 W (No-sound) 6 W (HDMI Standby Through) 2.5 W (Network Standby) Dimensions (W × H × D)
320 W 0.15 W (Stand-by, North American) 0.2 W (Stand-by, Others) 100 W (No-sound) 6 W (HDMI Standby Through) 2.5 W (Network Standby) Dimensions (W × H × D)
320 W 0.15 W (Stand-by, North American) 0.2 W (Stand-by, Others) 100 W (No-sound) 6 W (HDMI Standby Through) 2.5 W (Network Standby) Dimensions (W × H × D)
320 W 0.15 W (Stand-by, North American) 0.2 W (Stand-by, Others) 100 W (No-sound) 6 W (HDMI Standby Through) 2.5 W (Network Standby) Dimensions (W × H × D)
320 W 0.15 W (Stand-by, North American) 0.2 W (Stand-by, Others) 100 W (No-sound) 6 W (HDMI Standby Through) 2.5 W (Network Standby) Dimensions (W × H × D)
320 W 0.15 W (Stand-by, North American) 0.2 W (Stand-by, Others) 100 W (No-sound) 6 W (HDMI Standby Through) 2.5 W (Network Standby) Dimensions (W × H × D)
320 W 0.15 W (Stand-by, North American) 0.2 W (Stand-by, Others) 100 W (No-sound) 6 W (HDMI Standby Through) 2.5 W (Network Standby) Dimensions (W × H × D)
435 mm × 201 mm × 453 mm
435 mm × 201 mm × 453 mm
3

4>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
17-1/8" × 7-15/16" × 17-13/16" Weight19.5 kg (43.0 lbs.) (North American)
19.7 kg (43.4 lbs.) (Others)
̇HDMI
Input
IN1 (BD/DVD, HDCP2.2), IN2 (CBL/SAT, HDCP2.2), IN3 (STRM BOX, HDCP2.2), IN4 (GAME, HDCP2.2), IN5 (PC, HDCP2.2), IN6, IN7, AUX INPUT HDMI (front) OutputOUT MAIN (ARC, HDCP2.2) 55 mA OUT SUB (HDCP2.2) 55 mA Supported
Deep Color, x.v.ColorTM, LipSync, Audio Return Channel, 3D, 4K 60 Hz, CEC, Extended Colorimetry (sYCC601, Adobe RGB, Adobe YCC601), Content Type, HDR Audio Format
Dolby Atmos, Dolby TrueHD, Dolby Digital, Dolby Digital Plus, DTS, DTS:X, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS- ES, DTS-HD Express, DSD, PCM Maximum Video Resolution
4k 60 Hz (YCbCr 4:4:4) Compatible input resolutions
HDMI input : 4K, 1080p/24, 1080p, 1080i, 720p, 480p/576p Component input : 480i/576i Composite input : 480i/576i
• The output from the HDMI OUT jack to the TV is the same resolution as the input. When using a TV that supports 4K, 1080p HDMI video signals can also be output as 4K.
̇Video Inputs
Component
IN1 (BD/DVD), IN2 (GAME) Composite
IN1 (CBL/SAT), IN2 (STRM BOX)
̇Video Outputs
Component
OUT
̇Audio Inputs
DigitalOPTICAL 1 (GAME), 2 (CD), 3 (TV) COAXIAL 1 (BD/DVD), 2 (CBL/SAT) AnalogCBL/SAT, STRM BOX, BD/DVD, GAME, CD, TV,
PHONO
̇Audio Outputs
AnalogZONE2 PRE/LINE OUT ZONE3 PRE/LINE OUT PRE OUT (FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, HEIGHT 1 L/R, HEIGHT 2 L/R, 2 SUBWOOFER) Speaker Outputs
FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, HEIGHT 1 L/R, HEIGHT 2 L/R (North American models are banana plug ready) PhonesPHONES (Front, ø 6.3 mm, 1/4")
̇Others
Setup Mic : 1 (Front) USB : 1 (Ver. 2.0, 5 V/1 A) Ethernet : 1 RS232 : 1 IR IN : 1 12V TRIGGER OUT : 1 (MAIN, 100 mA)
̇ Power consumption in standby mode
• In the following cases, the power consumption in standby mode may reach up to a maximum of 6 W:
– When "Network Standby" is set to "On" – When "HDMI CEC" is set to "On" – When "HDMI Standby Through" is set to other than
"Off" – When "Bluetooth Wakeup" is set to "On"
Specifications and features are subject to change without notice.

>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix

About HDMI
ARCʢAudio Return Channelʣ: By connection a TV that supports ARC with a single HDMI cable, you can not only output the audio and video from this unit to the TV, but also input the audio from the TV to this unit.
Multi-channel linear PCM: Maximum 7.1 channels, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit
Multi-channel linear PCM: Maximum 7.1 channels, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit
Bitstream: Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS:X, DTS-HD High Resolution Audio, DTS-HD Master Audio
̇ Compatible functions
HDMI (High Definition Multimedia Interface) is a digital interface standard for connecting TVs, projectors, Blu- ray Disc/DVD players, set-top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry control signals, digital video and digital audio (2 ch PCM, multichannel digital audio, and multichannel PCM).
HDMI CEC functionality: By connecting devices and HDMI cables that comply with the CEC (Consumer Electronics Control) specification of the HDMI standard, a variety of linked operation become possible between devices. You can enjoy features such as linking input switching with the input selector and players, control volume using the remote controller of the TV, and automatically switching this unit to standby when the TV is turned off. The unit is designed to link with products that comply with the CEC standard, and that linked operation is not always guaranteed with all CEC devices. For linked functions to work properly, do not connect more CEC-compliant components than the quantities specified below, to the HDMI jack.
• Blu-ray Disc/DVD players: up to 3 units.
• Blu-ray Disc/DVD recorders: up to 3 units.
• Cable TV tuner, terrestrial digital tuner, and satellite broadcasting tuner: up to 4 units. Operation has been confirmed on the following devices: (As of February 2016) Toshiba brand televisions; Sharp brand televisions; Onkyo and Integra brand RIHD-compatible players; Toshiba brand players and recorders; Sharp brand players and recorders (when used with a Sharp brand television)
HDMI Standby Through: Even if this unit is in standby, the input signals from AV components are transmitted to the TV.
Deep Color: By connecting devices supporting Deep Color, video signals input from the devices can be reproduced on the TV with even more colors.
x�v�ColorTM: This technology realizes even more realistic colors by broadening the color gamut.
3D: You can transmit 3D video signals from AV components to the TV.
4K: This unit supports 4K (3840×2160p) and 4K SMPTE (4096×2160p) video signals.
LipSync: This setting automatically corrects any desynchronization between the video and audio signals based on data from the HDMI LipSync compatible TV.
Copyright Protection: The unit supports Revision 1.4 and Revision 2.2 (HDMI OUT MAIN/SUB and HDMI IN1 to 5 only) of the HDCP (High-bandwidth Digital Content Protection), a copy- protection system for digital video signals. Other devices connected to the unit must also support HDCP.
̇ Supported Audio Formats
2 ch linear PCM: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit
Bitstream: Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS:X, DTS-HD High Resolution Audio, DTS-HD Master Audio
Bitstream: Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS:X, DTS-HD High Resolution Audio, DTS-HD Master Audio
DSD: Supported sampling rates: 2.8 MHz
DSD: Supported sampling rates: 2.8 MHz
DSD: Supported sampling rates: 2.8 MHz
Your Blu-ray Disc/DVD player must also support HDMI output of the above audio formats.
Your Blu-ray Disc/DVD player must also support HDMI output of the above audio formats.
̇ Supported resolutions
̇ Supported resolutions
HDMI IN1 to IN5:
HDMI IN1 to IN5:
• Copyright protection technology: HDCP1.4/HDCP2.2
• Copyright protection technology: HDCP1.4/HDCP2.2
• Color space (Color Depth):
• Color space (Color Depth):
– 720×480i 60Hz, 720×576i 50Hz, 720×480p
– 720×480i 60Hz, 720×576i 50Hz, 720×480p
60Hz, 720×576p 50Hz, 1920×1080i 50/60Hz, 1280×720p 24/25/30/50/60Hz, 1680×720p 24/25/30/50/60Hz, 1920×1080p 24/25/30/50/60Hz, 2560×1080p 24/25/30/50/60Hz, 4K (3840×2160p) 24/25/30Hz, 4K SMPTE (4096×2160p) 24/25/30Hz : RGB/YCbCr4:4:4 (8/10/12 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 50/60Hz, 4K SMPTE (4096 ×2160p) 50/60Hz : RGB/YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit), YCbCr4:2:0 (8/10/12 bit)
60Hz, 720×576p 50Hz, 1920×1080i 50/60Hz, 1280×720p 24/25/30/50/60Hz, 1680×720p 24/25/30/50/60Hz, 1920×1080p 24/25/30/50/60Hz, 2560×1080p 24/25/30/50/60Hz, 4K (3840×2160p) 24/25/30Hz, 4K SMPTE (4096×2160p) 24/25/30Hz : RGB/YCbCr4:4:4 (8/10/12 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 50/60Hz, 4K SMPTE (4096 ×2160p) 50/60Hz : RGB/YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit), YCbCr4:2:0 (8/10/12 bit)
60Hz, 720×576p 50Hz, 1920×1080i 50/60Hz, 1280×720p 24/25/30/50/60Hz, 1680×720p 24/25/30/50/60Hz, 1920×1080p 24/25/30/50/60Hz, 2560×1080p 24/25/30/50/60Hz, 4K (3840×2160p) 24/25/30Hz, 4K SMPTE (4096×2160p) 24/25/30Hz : RGB/YCbCr4:4:4 (8/10/12 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 50/60Hz, 4K SMPTE (4096 ×2160p) 50/60Hz : RGB/YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit), YCbCr4:2:0 (8/10/12 bit)
60Hz, 720×576p 50Hz, 1920×1080i 50/60Hz, 1280×720p 24/25/30/50/60Hz, 1680×720p 24/25/30/50/60Hz, 1920×1080p 24/25/30/50/60Hz, 2560×1080p 24/25/30/50/60Hz, 4K (3840×2160p) 24/25/30Hz, 4K SMPTE (4096×2160p) 24/25/30Hz : RGB/YCbCr4:4:4 (8/10/12 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 50/60Hz, 4K SMPTE (4096 ×2160p) 50/60Hz : RGB/YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit), YCbCr4:2:0 (8/10/12 bit)
HDMI IN6 to IN7, Front:
HDMI IN6 to IN7, Front:
• Copyright protection technology: HDCP1.4
• Copyright protection technology: HDCP1.4
• Color space (Color Depth):
• Color space (Color Depth):
• Color space (Color Depth):
– 720×480i 60Hz, 720×576i 50Hz, 720×480p
– 720×480i 60Hz, 720×576i 50Hz, 720×480p
– 720×480i 60Hz, 720×576i 50Hz, 720×480p
60Hz, 720×576p 50Hz, 1920×1080i 50/60Hz, 1280×720p 24/25/30/50/60Hz, 1680×720p 24/25/30/50/60Hz, 1920×1080p 24/25/30/50/60Hz, 2560×1080p 24/25/30/50/60Hz : RGB/YCbCr4:4:4 (8/10/12 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 24/25/30Hz, 4K SMPTE (4096 ×2160p) 24/25/30Hz : RGB/YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 50/60Hz, 4K SMPTE (4096×
60Hz, 720×576p 50Hz, 1920×1080i 50/60Hz, 1280×720p 24/25/30/50/60Hz, 1680×720p 24/25/30/50/60Hz, 1920×1080p 24/25/30/50/60Hz, 2560×1080p 24/25/30/50/60Hz : RGB/YCbCr4:4:4 (8/10/12 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 24/25/30Hz, 4K SMPTE (4096 ×2160p) 24/25/30Hz : RGB/YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 50/60Hz, 4K SMPTE (4096×
60Hz, 720×576p 50Hz, 1920×1080i 50/60Hz, 1280×720p 24/25/30/50/60Hz, 1680×720p 24/25/30/50/60Hz, 1920×1080p 24/25/30/50/60Hz, 2560×1080p 24/25/30/50/60Hz : RGB/YCbCr4:4:4 (8/10/12 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 24/25/30Hz, 4K SMPTE (4096 ×2160p) 24/25/30Hz : RGB/YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 50/60Hz, 4K SMPTE (4096×
60Hz, 720×576p 50Hz, 1920×1080i 50/60Hz, 1280×720p 24/25/30/50/60Hz, 1680×720p 24/25/30/50/60Hz, 1920×1080p 24/25/30/50/60Hz, 2560×1080p 24/25/30/50/60Hz : RGB/YCbCr4:4:4 (8/10/12 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 24/25/30Hz, 4K SMPTE (4096 ×2160p) 24/25/30Hz : RGB/YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 50/60Hz, 4K SMPTE (4096×
60Hz, 720×576p 50Hz, 1920×1080i 50/60Hz, 1280×720p 24/25/30/50/60Hz, 1680×720p 24/25/30/50/60Hz, 1920×1080p 24/25/30/50/60Hz, 2560×1080p 24/25/30/50/60Hz : RGB/YCbCr4:4:4 (8/10/12 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 24/25/30Hz, 4K SMPTE (4096 ×2160p) 24/25/30Hz : RGB/YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit) – 4K (3840×2160p) 50/60Hz, 4K SMPTE (4096×
2160p) 50/60Hz : YCbCr4:2:0 (8 bit)
5

6>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Setup Menu
The unit allows you to configure advanced settings to provide you with an even better experience.
Operation: Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Setup menu.
Setup
1. Input/Output Assign
2. Speaker
3. Audio Adjust
4. Source
5. Hardware
6. Multi Zone
7. Miscellaneous
1� Input/Output Assign
Make settings related to output to the TV, change the settings for jack allocations to the various input selectors, and set the feature for displaying operations on the TV (OSD), etc.
̇ 1� TV Out / OSD
Setting Item Default Value Setting Details
HDMI Out MAIN Select the HDMI jack to be connected with the TV.
"MAIN": When connecting the TV to the HDMI OUT MAIN jack "SUB": When connecting the TV to the HDMI OUT SUB jack "MAIN+SUB": When connecting to both the MAIN
1. TV Out / OSD
and SUB jacks 2. HDMI Input
3. Video Input
1080p >> 4K
4. Digital Audio Input
Upscaling 5. Analog Audio Input
Select the item with the cursor / buttons of the remote controller and press ENTER to confirm your selection. Use the cursors / to change the default values.
• To return to the previous screen, press .
• To exit the settings, press .
Off When using a TV that supports 4K, video signals
input at 1080p can be automatically upscaled to 4K for output. "Off": Do not use this function "Auto": Use this function
• Select "Off" if your TV does not support 4K.
Super Resolution 2 When you have set "1080p >> 4K Upscaling" to
"Auto", you can select the degree of video signal correction from "Off" and between "1" (weak) and "3" (strong).
Zone 2 HDMI Not Use Make the setting when you output to the Zone 2 TV
connected to the HDMI OUT ZONE 2/SUB jack. "Use": Enable this function "Not Use": Disable this function
OSD Language English Select the on-screen display language from the following. (North American models) English, German, French, Spanish, Italian, Dutch, Swedish (European and Asian models) English, German, French, Spanish, Italian, Dutch, Swedish, Russian, Chinese

>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Setting Item Default Value Setting Details
Impose OSD On Set whether or not to display the information on
the TV when the volume is adjusted or input is changed, for example. "On": OSD displayed on the TV "Off": OSD not displayed on the TV
• OSD may not be displayed depending on the input signal even if "On" is selected. If the operation screen is not displayed, change the resolution of the connected device.
Screen Saver 3 minutes Set the time to start the screen saver.
Select a value from "3 minutes", "5 minutes", "10 minutes" and "Off".
̇ 2� HDMI Input
You can change input assignment between the input selectors and HDMI IN jacks.
Setting Item Default Value Setting Details
BD/DVD HDMI 1
(HDCP 2.2)
Troubleshooting | AppendixSetting Item Default Value Setting Details
PC HDMI 5
"HDMI 1 (HDCP 2.2)" to "HDMI 7": Assign a (HDCP 2.2)
desired HDMI IN jack to the PC button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.
CD ----- "HDMI 1 (HDCP 2.2)" to "HDMI 7": Assign a
desired HDMI IN jack to the CD button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.
TV ----- "HDMI 1 (HDCP 2.2)" to "HDMI 7": Assign a
desired HDMI IN jack to the TV button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.
PHONO ----- "HDMI 1 (HDCP 2.2)" to "HDMI 7": Assign a
desired HDMI IN jack to the PHONO button. If you do not assign a jack, select "-----". To select an
"HDMI 1 (HDCP 2.2)" to "HDMI 7": Assign a desired HDMI IN jack to the BD/DVD button. If you
HDMI IN jack already assigned to another input selector, change its setting to "-----" first.
do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.
CBL/SAT HDMI 2
(HDCP 2.2)
7 "HDMI 1 (HDCP 2.2)" to "HDMI 7": Assign a desired HDMI IN jack to the CBL/SAT button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.
GAME HDMI 4
(HDCP 2.2)
"HDMI 1 (HDCP 2.2)" to "HDMI 7": Assign a desired HDMI IN jack to the GAME button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.
STRM BOX HDMI 3
(HDCP 2.2)
"HDMI 1 (HDCP 2.2)" to "HDMI 7": Assign a desired HDMI IN jack to the STRM BOX button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.

8>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
̇ 3� Video Input
You can change input assignment between the input selectors and COMPONENT VIDEO IN jacks and the VIDEO IN jacks. If you do not assign a jack, select "-----".
Setting Item Default Value Setting Details
BD/DVD COMPONENT 1 "COMPONENT 1", "COMPONENT 2": Assign the
COMPONENT VIDEO IN jacks to the BD/DVD button. "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the BD/DVD button.
CBL/SAT VIDEO 1 "COMPONENT 1", "COMPONENT 2": Assign the
COMPONENT VIDEO IN jacks to the CBL/SAT button. "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the CBL/SAT button.
GAME COMPONENT 2 "COMPONENT 1", "COMPONENT 2": Assign
the COMPONENT VIDEO IN jacks to the GAME button. "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the GAME button.
STRM BOX VIDEO 2 "COMPONENT 1", "COMPONENT 2": Assign the COMPONENT VIDEO IN jacks to the STRM BOX button. "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the STRM BOX button.
PC ----- "COMPONENT 1", "COMPONENT 2": Assign the
COMPONENT VIDEO IN jacks to the PC button. "VIDEO 1" to "VIDEO 2": Assign a desired VIDEO IN jack to the PC button.
CD ----- "COMPONENT 1", "COMPONENT 2": Assign the
COMPONENT VIDEO IN jacks to the CD button. "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the CD button.
TV ----- "COMPONENT 1", "COMPONENT 2": Assign the
COMPONENT VIDEO IN jacks to the TV button. "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the TV button.
Setting Item Default Value Setting Details
PHONO ----- "COMPONENT 1", "COMPONENT 2": Assign the
COMPONENT VIDEO IN jacks to the PHONO button. "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the PHONO button.

>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
̇ 4� Digital Audio Input
You can change input assignment between the input selectors and DIGITAL IN COAXIAL/ OPTICAL jacks. If you do not assign a jack, select "-----".
Setting Item Default Value Setting Details
BD/DVD COAXIAL 1 "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2", "OPTICAL 3": Assign a desired DIGITAL IN jack to the BD/DVD button.
CBL/SAT COAXIAL 2 "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2", "OPTICAL 3": Assign a desired DIGITAL IN jack to the CBL/SAT button.
GAME OPTICAL 1 "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2", "OPTICAL 3": Assign a desired DIGITAL IN jack to the GAME button.
STRM BOX ----- "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2", "OPTICAL 3": Assign a desired DIGITAL IN jack to the STRM BOX button.
PC ----- "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2", "OPTICAL 3": Assign a desired DIGITAL IN jack to the PC button.
CD OPTICAL 2 "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2", "OPTICAL 3": Assign a desired DIGITAL IN jack to the CD button.
TV OPTICAL 3 "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2", "OPTICAL 3": Assign a desired DIGITAL IN jack to the TV button.
PHONO ----- "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2", "OPTICAL 3": Assign a desired DIGITAL IN jack to the PHONO button.
• Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz/16bit, 20bit, and 24bit.
Troubleshooting | Appendix ̇ 5� Analog Audio Input
You can change input assignment between the input selectors and AUDIO IN jacks. If you do not assign a jack, select "-----".
Setting Item Default Value Setting Details
BD/DVD AUDIO 3 "AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the BD/DVD button.
CBL/SAT AUDIO 1 "AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the CBL/SAT button.
GAME AUDIO 4 "AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the GAME button.
STRM BOX AUDIO 2 "AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the STRM BOX button.
PC ----- "AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the PC button.
CD AUDIO 5 "AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the CD button.
TV AUDIO 6 "AUDIO 1" to "AUDIO 6": Assign a desired AUDIO
IN jack to the TV button.
PHONO PHONO The setting cannot be changed.
9

10>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
2� Speaker
You can make changes to the connection environment of the speakers and change the volume level. Settings are automatically configured if you use AccuEQ Room Calibration. This setting cannot be selected if headphones are connected or audio is output from the speakers of the TV.
̇ 1� Configuration
Setting Item Default Value Setting Details
Speaker Channels
Setting Item Default Value Setting Details
Height 1 Speaker Top Middle Set the speaker type if height speakers are
connected to the HEIGHT 1 terminals. Select "Front High", "Top Front", "Top Middle", "Top Rear", "Rear High", "Dolby Speaker (Front)", "Dolby Speaker (Surr)", or "Dolby Speaker (Back)" according to the type and layout of the connected speakers.
• This setting cannot be selected under any of following conditions. Set the height speakers
7.1.2 ch Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1
ch", "7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", "5.1.2 ch", "6.1.2 ch", "7.1.2 ch", "4.1.4 ch", "5.1.4 ch", "6.1.4 ch", or "7.1.4 ch" to suit the number of speaker channels connected.
• This unit consists of a 9 ch amplifier, so with "6.1.4 ch" or "7.1.4 ch" selected, use an analog audio cable to connect the power amplifier to the PRE OUT BACK jacks on this unit, then connect the surround back speakers to the power amplifier.
type to "Height 2 Speaker". – "Bi-Amp" is set to "Yes" – "Zone Speaker" is set to "Zone 2/Zone 3"
• When two sets of height speakers are being used, "Top Rear", "Rear High", "Dolby Speaker (Surr)", and "Dolby Speaker (Back)" cannot be selected
• "Dolby Speaker (Surr)" and "Dolby Speaker (Back)" can only be selected when surround speakers or surround back speakers are being used, respectively. You can check speakers that you are using on the figure displayed in Subwoofer 2ch Set the PRE OUT SUBWOOFER jacks which
"Speaker Channels". output audio signals.
• If an item cannot be selected even though "1ch": Only the PRE OUT SUBWOOFER 1 jacks
connection is correct, check that the settings output audio signals.
in "Speaker Channels" matches the number of "2ch": Both the PRE OUT SUBWOOFER 1 jacks
connected channels. and the PRE OUT SUBWOOFER 2 jacks output audio signals. "No": Neither the PRE OUT SUBWOOFER 1 jacks nor the PRE OUT SUBWOOFER 2 jacks output audio signals.

>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Setting Item Default Value Setting Details
Height 2 Speaker Rear High Set the speaker type if height speakers are
connected to the HEIGHT 2 terminals. Select "Front High", "Top Front", "Top Middle", "Top Rear", "Rear High", "Dolby Speaker (Front)", "Dolby Speaker (Surr)", or "Dolby Speaker (Back)" according to the type and layout of the connected speakers. However, the options selectable for the "Height 1 Speaker" the are as follows. If "Height 1 Speaker" is set to "Front High": Select from "Top Middle", "Top Rear", "Rear High", "Dolby Speaker (Surr)", or "Dolby Speaker (Back)". If "Height 1 Speaker" is set to "Top Front" or "Dolby Speaker (Front)": Select from "Top Rear", "Rear High", "Dolby Speaker (Surr)", or "Dolby Speaker (Back)". If "Height 1 Speaker" is set to "Top Middle": Fixed to "Rear High".
• "Dolby Speaker (Surr)" and "Dolby Speaker (Back)" can only be selected when surround speakers or surround back speakers are being used, respectively. You can check speakers that you are using on the figure displayed in "Speaker Channels".
• If an item cannot be selected even though connection is correct, check that the settings in "Speaker Channels" matches the number of connected channels.
Zone Speaker No Set the connection of speakers to Zone 2 or Zone
3 speaker terminals. "Zone 2": When speakers are connected only to Zone 2 speaker terminals "Zone 2/Zone 3": When speakers are connected to both Zone 2 and Zone 3 speaker terminals
• "Zone 2/Zone 3" cannot be selected when surround back speakers and height speakers are being used. "No": When speakers are not connected to either speaker terminals
• This item will be set to "No" when two sets of height speakers are being used.
Troubleshooting | AppendixSetting Item Default Value Setting Details
Bi-Amp No Set whether the front speakers are bi-amp
connected. "No": When front speakers are not bi-amp connected "Yes": When front speakers are bi-amp connected
• In any of the following cases, this item will be set to "No":
– When two sets of height speakers are being
used – When "Zone Speaker" is set to "Zone 2/Zone
3" – When height speakers and ZONE speakers
are being used at the same time.
11

12>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
̇ 2� Crossover
• If you are using THX-certified speakers, we recommend the following settings:
– Set a value "80Hz(THX)" in Crossover frequency. – Set a value "80Hz" in "LPF of LFE". – Set a value "Off" in "Double Bass".
Setting Item Default Value Setting Details
Front 80Hz (THX) Select the crossover frequency from "40Hz" to
"200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output.
• If "Configuration" - "Subwoofer" is set to "No", "Front" will be fixed to "Full Band" and the low pitched range of the other channels will be output from the front speakers. Refer to the instruction manual of your speakers to make the setting.
Center 80Hz (THX) Select the crossover frequency from "40Hz" to
"200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output.
• "Full Band" can be selected only when "Front" is set to "Full Band".
• If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels.
Height 1 80Hz (THX) Select the crossover frequency from "40Hz" to
"200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output.
• "Full Band" can be selected only when "Front" is set to "Full Band".
• If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels.
Setting Item Default Value Setting Details
Height 2 80Hz (THX) Select the crossover frequency from "40Hz" to
"200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output.
• "Full Band" can be selected only when "Front" is set to "Full Band".
• If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels.
Surround 80Hz (THX) Select the crossover frequency from "40Hz" to
"200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output.
• "Full Band" can be selected only when "Front" is set to "Full Band".
• If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels.
Surround Back 80Hz (THX) Select the crossover frequency from "40Hz" to
"200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output.
• "Full Band" can be selected only when "Surround" is set to "Full Band".
• If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels.
LPF of LFE 120Hz Set the low-pass filter for LFE (low-frequency
effect) signals in order to pass lower frequency signals than the set value and thus cancel unwanted noises. The low-pass filter will be effective only on sources with LFE channel. The value from "80Hz" to "120Hz" can be set. "Off": Do not use this function

>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Setting Item Default Value Setting Details
Double Bass On This can be selected only when "Configuration" -
"Subwoofer" is set to other than "No" and "Front" is set to "Full Band". Boost bass output by feeding bass sounds from the front left and right, and center speakers to the subwoofer. "On": Bass output will be boosted "Off": Bass output will not be boosted
• The setting will not automatically be configured even if you performed AccuEQ Room Calibration.
̇ 3� Distance
Set the distance from each speaker to the listening position.
Setting Item Default Value Setting Details
Front Left 12' 0" / 3.60 m Specify the distance between each speaker and
the listening position.
Center 12' 0" / 3.60 m Specify the distance between each speaker and
the listening position.
Front Right 12' 0" / 3.60 m Specify the distance between each speaker and
the listening position.
Height 1 Left 9' 0" / 2.70 m Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Height 1 Right 9' 0" / 2.70 m Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Height 2 Left 9' 0" / 2.70 m Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Troubleshooting | AppendixSetting Item Default Value Setting Details
Height 2 Right 9' 0" / 2.70 m Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Surround Right 7' 0" / 2.10 m Specify the distance between each speaker and
the listening position.
Surr Back Right 7' 0" / 2.10 m Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Surr Back Left 7' 0" / 2.10 m Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Surround Left 7' 0" / 2.10 m Specify the distance between each speaker and
the listening position.
Subwoofer 1 12' 0" / 3.60 m Specify the distance between each speaker and
the listening position.
Subwoofer 2 12' 0" / 3.60 m Specify the distance between each speaker and
the listening position.
• Default values vary depending on the regions.
• Distance units can be switched by pressing MODE on the remote controller. When the unit is set as feet, you can set between 0' 0" 1/2 and 30' 0" in increments of 1/2. When the unit is set as meters, you can set between 0.01 m and 9.00 m in increments of 0.01 m.
̇ 4� Level Calibration
Setting Item Default Value Setting Details
Front Left 0.0 dB Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Center 0.0 dB Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
13

14>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Setting Item Default Value Setting Details
Front Right 0.0 dB Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Height 1 Left 0.0 dB Select a value between "ɻ12.0 dB" and "ɹ12.0
dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
• Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Height 1 Right 0.0 dB Select a value between "ɻ12.0 dB" and "ɹ12.0
dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
• Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Height 2 Left 0.0 dB Select a value between "ɻ12.0 dB" and "ɹ12.0
dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
• Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Height 2 Right 0.0 dB Select a value between "ɻ12.0 dB" and "ɹ12.0
dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
• Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Surround Right 0.0 dB Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Surr Back Right 0.0 dB Select a value between "ɻ12.0 dB" and "ɹ12.0
dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
• Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Setting Item Default Value Setting Details
Surr Back Left 0.0 dB Select a value between "ɻ12.0 dB" and "ɹ12.0
dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
• Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Surround Left 0.0 dB Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Subwoofer 1 0.0 dB Select a value between "ɻ15.0 dB" and "ɹ12.0
dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Subwoofer 2 0.0 dB Select a value between "ɻ15.0 dB" and "ɹ12.0
dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
̇ 5� Dolby Enabled Speaker
Setting Item Default Value Setting Details
Dolby Enabled Speaker to Ceiling
6' 0" / 1.80 m Set the distance between the Dolby Enabled
Speaker and the ceiling. Select between " 0' 0" 1/2 "/"0.01 m" to " 15' 0" "/"4.50 m" (1/2 / 0.01 m units).
• The unit of distance (feet / meters) shown is the unit selected for use in "Distance".
AccuReflex Off You can enhance the reflection effect of Dolby
Enabled Speakers from the ceiling. "Off": Do not use this function "On": Use this function
• This setting can be selected when "Configuration" - "Height 1 Speaker"/"Height 2 Speaker" is set to "Dolby Speaker".
̇ 6� Equalizer Settings
You can adjust the output volume of the range of each connected speaker. You can adjust

>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
the volume of the different sound ranges for each of the speakers. You can set three different equalizers in Preset 1 to 3. You can select up to five bands for the Subwoofer and nine bands for all other speakers.
Setting Item Default Value Setting Details
Front 0.0 dB After selecting the speaker frequency from
between 25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / .
Center 0.0 dB After selecting the speaker frequency from
between 25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / .
Height 1 0.0 dB After selecting the speaker frequency from
between 25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / .
• Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Height 2 0.0 dB After selecting the speaker frequency from
between 25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / .
• Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Surround 0.0 dB After selecting the speaker frequency from
between 25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / .
Surround Back 0.0 dB After selecting the speaker frequency from
between 25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / .
• Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Troubleshooting | AppendixSetting Item Default Value Setting Details
Subwoofer 0.0 dB After selecting the speaker frequency from
between 25 Hz" and "160 Hz" with the cursors
/ , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / .
• This cannot be selected if "No" is set in "Configuration" - "Subwoofer".
• The result may not be as expected depending on the input source and listening mode setting.
̇ 7� THX Audio
Setting item Default Value Setting Details
Back Speaker >>4.0 ft>>1.2 m Select the distance between the surround back Spacing
speakers from <<1.0 ft<<0.3 m", "1.0 - 4.0 ft/0.3 - 1.2 m", and >>4.0 ft>>1.2 m".
• The unit of distance (feet / meters) shown is the unit selected for use in "Distance".
• Depending on the use of the ZONE speakers, it may not be possible to select this setting.
• If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels.
THX Ultra2 / Select2 Subwoofer
15 No Set "Yes" or "No" of the connection of the THX
certified subwoofer. "Yes": When a THX-certified subwoofer is connected "No": When a THX-certified subwoofer is not connected
• The setting cannot be changed if "Configuration" - "Subwoofer" is set to "No".

16>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Setting item Default Value Setting Details
BGC Off If your listening room layout (for practical or
aesthetic reasons) locates most of the listeners close to the rear wall, the resulting bass level can be sufficiently reinforced by the boundary that the overall sound becomes "boomy". THX Select2 Plus receivers contain a Boundary Gain Compensation (BGC) feature to improve bass balance. "On": Use this function "Off": Do not use this function
• In the following cases, the setting cannot be changed:
– "Configulation" - "Subwoofer" is set to "No". – "THX Ultra2 / Select2 Subwoofer" is set to
"No".
Loudness Plus On When the setting is set to "On", it is possible to
enjoy even subtle nuances of audio expression at low volume. This is only available when the THX listening mode is selected. THX Loudness Plus THX Loudness Plus is a new volume control technology featured in THX Ultra2 PlusTM and THX Select2 PlusTM Certified receivers. With THX Loudness Plus, home theater audiences can now experience the rich details in a surround mix at any volume level. A consequence of turning the volume below Reference Level is that certain sound elements can be lost or perceived differently by the listener. THX Loudness Plus compensates for the tonal and spatial shifts that occur when the volume is reduced by intelligently adjusting ambient surround channel levels and frequency response. This enables users experience the true impact of soundtracks regardless of the volume setting. THX Loudness Plus is automatically applied when listening in any THX listening mode. The new THX Cinema, THX Music, and THX Games modes are tailored to apply the proper THX Loudness Plus settings for each type of content.
̇8� EQ for Standing Wave
This controls the affect of the standing waves that occur when sound waves reverberating off obstacles such as walls interfere with the original sound waves.
Setting Item Default Value Setting Details
Filter 1-3 0.0 dB 1. After selecting the Filter to adjust from "Filter 1"
to "Filter 3" with / , press ENTER. 2. Select the frequency with / , then adjust
the attenuation with / . The frequency can be selected between "63 Hz" and "250 Hz". Attenuation can be selected between "0.0 dB" and "12.0 dB" (0.5 dB intervals).

>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
3� Audio Adjust
Make advanced settings such as those related to multiplex audio, settings for the LFE level, or those related to the volume of this unit.
̇ 1� Multiplex/Mono
Setting Item Default Value Setting Details
Multiplex Input Channel
Troubleshooting | Appendix ̇ 2� Dolby
Setting Item Default Value Setting Details
Loudness
On When playing Dolby TrueHD, enable the dialog Management
normalization function which keeps the volume of dialog at a certain level. Note that when this setting is Off, the Late Night function that allows you to enjoy surround at low volumes is fixed to off when
Main Set the audio channel or language to be output when playing multiplex audio or multilingual TV broadcasts etc.
playing Dolby Digital Plus/Dolby TrueHD. "On": Use this function "Off": Do not use this function
"Main": Main channel only "Sub": Sub channel only "Main/Sub": Main and sub channels will be output
̇ 3� DTS
at the same time.
• If multiplex audio is being played, "1+1" will be
Setting Item Default Value Setting Details displayed when on the remote controller is
DTS Auto
On When inputting DTS signals that include extended pressed.
Surround
channel information, the optimum listening mode is Mono Input Channel
Left + Right Set the input channel to use for playing any 2 ch
digital source such as Dolby Digital, or 2 ch analog/ PCM source in the Mono listening mode. "Left": Left channel only "Right": Right channel only "Left + Right" : Left and right channels
Mono Output Speaker
automatically selected according to the extended information contained in the input signal and the speaker configuration of this unit when playing in the straight decoding listening mode. "On": Use this function "Off": Audio is played using the same amount of channels in the input signal according to the speaker configuration of this unit.
• The ES Matrix and ES Discrete listening modes cannot be selected if this function is set to "Off".
̇ 4� LFE Level
Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM, and DSD signals.
Setting Item Default Value Setting Details
LFE Level 0 dB Select the low-frequency effect (LFE) level of each
type of signal from "0dB" to "-∞dB". If the low- frequency effect sound is too strong, select "-20dB" or "-∞dB".
17 Center Select the speaker to output monaural audio in the
Mono listening mode. "Center": Audio is output from the center speaker. "Left/Right": Audio is output from the front L/R speakers.
• If an item cannot be selected even though connection is correct, check that the settings in "2. Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels.

18>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
̇ 5� Volume
Setting Item Default Value Setting Details
Volume Display Absolute Switch the volume display between the absolute
value and relative value. The absolute value 82.0 is equivalent to the relative value 0.0dB. "Absolute": Absolute value such as "0.5" and "99.5" "Relative": Relative value such as "-81.5dB" and "+18.0dB"
• If the absolute value is set to 82.0, "82.0Ref" will appear on the display.
Mute Level -∞dB Set the volume lowered from the listening volume when muting is on. Select a value from "-∞dB", "-40dB", and "-20dB".
Maximum Volume Off Set the maximum value to avoid too high volume.
Select a value from "Off", "50" to "99". (When "Volume Display" is set to "Absolute")
Power On Volume Last Set the volume level of when the power is turned
on. Select a value from "Last" (Volume level before entering standby mode), "Min", "0.5" to "99.5" and "Max". (When "Volume Display" is set to "Absolute")
• You cannot set a higher value than that of "Maximum Volume".
Headphone Level 0.0 dB Adjust the output level of the headphones. Select a
value between "-12.0 dB" and "+12.0 dB".
4� Source
Make settings for input sources, such as volume difference adjustments for each input selector for the connected equipment.
̇ 1� IntelliVolume
Adjust the volume level difference between the devices connected to the unit. Select the input selector to configure.
Setting Item Default Value Setting Details
IntelliVolume 0.0 dB Select a value between "-12.0 dB" and "+12.0
dB". Set a negative value if the volume of the target device is larger than the others and a positive value if smaller. To check the audio, start playback of the connected device.
• This function is not effective in Zone 2/Zone 3.
̇ 2� Name Edit
Set an easy name to each input. The set name will be shown on the main unit display. Select the input selector to configure.
Setting Item Default Value Setting Details
Name Edit Input name 1. Select a character or symbol with the cursors
and press ENTER. Repeat it to input 10 or less characters. "A/a": Switches between upper and lower cases. (Pressing MODE on the remote controller also toggles between upper and lower cases) "←" "→": Moves the cursor to the arrow direction. " ": Removes a character on the left of the cursor. " ": Enters a space.
• Pressing CLR on the remote controller will remove all the input characters. 2. After inputting, select "OK" with the cursors and
press ENTER. The input name will be saved.

>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
• To name a preset radio station, press TUNER on the remote controller, select AM/FM and select the preset number.
• This cannot be set if the "NET" or "BLUETOOTH" input is selected.
̇ Audio Select
Select the priority for input selection when multiple audio sources are connected to one input selector, such as connections to both the "BD/DVD" HDMI IN jack and the "BD/DVD" AUDIO IN jack. The setting can be separately set to each input selector button. Select the input selector to configure. Note that there are some default values you cannot change.
Setting Item Default Value Setting Details
Audio Select BD/DVD:
HDMI CBL/SAT:
HDMI GAME: HDMI STRM BOX:
HDMI PC:
HDMI AUX:
HDMI CD:
OPTICAL TV:
OPTICAL PHONO: Analog
Troubleshooting | AppendixSetting Item Default Value Setting Details
PCM Fixed Mode Off Select whether to fix input signals to PCM (except
multi-channel PCM) when you have selected "HDMI", "COAXIAL", or "OPTICAL" in the "Audio Select" setting. Set this item to "On" if noise is produced or truncation occurs at the beginning of a track when playing PCM sources. Select "Off" normally.
• Changing "Audio Select" changes the setting to "Off".
• The setting cannot be changed when "TUNER", "NET", or "BLUETOOTH" input is selected. "ARC": When giving priority to input signal from ARC compatible TV.
• The setting can be selected only when
̇ Video Select "5. Hardware" - "HDMI" - "Audio Return
When "TUNER", "NET", or "BLUETOOTH" input is selected, you can set the input from Channel" is set to "Auto" and also the "TV" input
which video is displayed on the TV. is selected. "HDMI": When giving priority to input signal from HDMI IN jacks
Setting Item Default Value Setting Details
• The setting can be selected only when the input
Video Select Last "Last": Select the video input played immediately is assigned to the HDMI jack in the "1. Input/
prior. Output Assign" - "HDMI Input" setting.
"BD/DVD", "CBL/SAT", "GAME", "STRM BOX", "COAXIAL": When giving priority to input signal
"PC", "AUX", "CD", "TV", "PHONO": Play the video from DIGITIAL IN COAXIAL jacks
from the selected input.
• The setting can be selected only when the input
• This setting is effective for an input selector is assigned to the COAXIAL jack in the "1. Input/
which is assigned in "1. Input/Output Assign" - Output Assign" - "Digital Audio Input" setting.
"HDMI Input" and "Video Input". "OPTICAL": When giving priority to input signal from DIGITIAL IN OPTICAL jacks
• The setting can be selected only when the input
• If the OSD language is set to Chinese, you can only select this setting when "TUNER" is selected as input. (European and Asian models)
is assigned to the OPTICAL jack in the "1. Input/ Output Assign" - "Digital Audio Input" setting. "Analog": To always output analog audio independently of the input signal
• The setting can be selected only when the input is assigned to the AUDIO IN jack in the "1. Input/Output Assign" - "Analog Audio Input" setting.
19

20>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
5� Hardware
Make settings related to the HDMI CEC, HDMI Standby Through, ARC features, settings related to network features, and settings related to power management of the unit, such as Auto Standby and Network Standby.
̇ 1� HDMI
Setting Item Default Value Setting Details
HDMI CEC Off Setting to "On" enables the input selection link and
other link functions with HDMI connected CEC compliant device. "On": Use this function "Off": Do not use this function When changing this setting, turn off and then on again the power of all connected components.
• Depending on the TV set, a link may need to be configured on the TV.
• This function is effective only when the device is connected to the HDMI OUT MAIN terminal.
• Setting to "On" and closing the on-screen menu displays the name of the CEC-compatible components and "CEC On" on the display.
• Power consumption in standby mode may increase if "On" is set. (Depending on the TV status, the unit will enter the normal standby mode.)
• If you operate the MASTER VOLUME dial on the main unit when this setting is "On" and audio is output from the TV speakers, audio will be output also from the speakers connected to the unit. If you want to output from only either of them, change the unit or TV settings, or reduce the volume of the unit.
• If abnormal operation occurs when you set the setting to "On", set it to "Off".
• When connecting a non-CEC compatible component, or when you are not sure whether it is compatible, set the setting to "Off".
Setting Item Default Value Setting Details
HDMI Standby Through
Off When this is set to anything other than "Off",
you can play the video and audio of an HDMI connected player on the TV even if the unit is in standby mode. Only "Auto" and "Auto(Eco)" can be selected if "HDMI CEC" is set to "On". If you select anything else, set "HDMI CEC" to "Off".
• Power consumption in standby mode increases if set to anything other than "Off". "BD/DVD", "CBL/SAT", "GAME", "STRM BOX", "PC", "AUX", "CD", "TV", "PHONO": For example, if you select "BD/DVD", you can play the equipment connected to the "BD/DVD" jack on the TV even if the unit is in standby mode. Select this setting if you have decided which player to use with this function. "Last": You can play the video and audio of the input selected immediately prior to the unit being switched to standby on the TV. When "Last" is selected, you can switch the input of the unit even in the standby mode with the remote controller or the Onkyo Remote app. "Auto", "Auto (Eco)": Select one of these settings when you have connected equipment that conforms to the CEC standard. You can play the video and audio of the input selected on the TV, irrespective of what input was selected immediately prior to the unit being switched to standby, using the CEC link function.
• To play players on the TV that do not conform to the CEC standard, you will need to turn the unit on and switch to the relevant input.
• When using TV that complies with the CEC standard, you can reduce the power consumption in standby mode by selecting "Auto (Eco)".

>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Setting Item Default Value Setting Details
Audio TV Out Off You can enjoy audio through the speakers of the
TV while this unit is on. "On": Use this function "Off": Do not use this function
• This setting is fixed to "Auto" if you have set "1. Input/Output Assign" - "TV Out/OSD" - "HDMI Out" or "Other" - "HDMI Out" in the "Quick Menu" to "MAIN" or "MAIN+SUB" and "HDMI CEC is set to "On". If you change this setting, set "HDMI CEC" to "Off".
• Listening mode cannot be changed while "Audio TV Out" is set to "On" and audio is being output through the speakers of the TV.
• Depending on your TV set or input signal of the component, audio may not output through the speakers of the TV even if this setting is set to "On". In such case, audio is output from the speakers of the unit.
• If you operate the MASTER VOLUME dial on this unit when audio that is being input through this unit for output from the TV speakers, audio is output from this unit. If you do not want to output audio from the unit, change the unit or TV settings, or reduce the volume of the unit.
Audio Return Channel
Troubleshooting | Appendix ̇ 2� Network
• When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the setting automatically. ("Enable" is set by default) To assign fixed IP addresses to each components, you must set "DHCP" to "Disable" and assign an address to this unit in "IP Address" as well as set information related to your LAN, such as Subnet Mask and Gateway.
Setting Item Default Value Setting Details
Wi-Fi Off (Wired) Connect the unit to network via wireless LAN router. "On": Wireless LAN connection "Off (Wired)": Wired LAN connection
Wi-Fi Setup ‐ You can configure wireless LAN settings by pressing ENTER when "Start" is displayed.
Wi-Fi Status ‐ The information of the connected access point will
be displayed. "SSID": SSID of the connected access point. "Signal": Signal strength of the connected access point. "Status": Status of the connected access point.
MAC Address ‐ This is the MAC address of this unit.
This value is specific to the component and cannot be changed.
Auto (*) You can enjoy sound of the HDMI connected ARC
DHCP compatible TV through the speakers connected to the unit. * To use this function, set "HDMI CEC" to "On" in
advance.
Enable "Enable": Auto configuration by DHCP
"Disable": Manual configuration without DHCP
• If selecting "Disable", you must set "IP Address", "Subnet Mask", "Gateway", and "DNS Server" manually.
"Auto": When enjoying the TV sound through the
IP Address 0.0.0.0 Displays/Sets the IP address. Auto LipSync On speakers connected to the unit
"Off": When not using the ARC function
This setting automatically corrects any desynchronization between the video and audio signals
Subnet Mask 0.0.0.0 Gateway 0.0.0.0 DNS Server 0.0.0.0 Displays/Sets the subnet mask.
Displays/Sets the gateway.
Displays/Sets the primary DNS server. based on data from the HDMI LipSync compatible TV.
Proxy URL ‐ Displays/Sets the proxy server URL. "On": Automatic correction will be enabled "Off": Automatic correction will be disabled
Proxy Port 8080 Displays/Sets the proxy server port number when
you enter "Proxy URL".
21

22>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Setting Item Default Value Setting Details
Friendly Name Onkyo TX-
RZ1100 XXXXXX
Setting Item Default Value Setting Details
Change the device name for this unit which is
Usage Data No As a means of improving the quality of our products shown on other devices connected to the network
and services, Onkyo may collect information about to an easily recognized name.
your usage over the network. Select "Yes" if you 1. Press ENTER to display the Edit screen.
agree to our collecting this information. Select "No" 2. Select a character or symbol with the cursors
if you do not want us to collect this information. and press ENTER.
• You can set this after confirming the Privacy Repeat it to input 31 or less characters.
Policy. When you select "Usage Data" and "A/a": Switches between upper and lower
press ENTER, the Privacy Policy is displayed. cases. (Pressing MODE on the remote
(The same screen is displayed once also when controller also toggles between upper and
setting up the network connection.) If you agree lower cases.)
to the collection of the information, this setting "←" "→": Moves the cursor to the arrow direction.
also becomes "Yes". Note that if you agree " ": Removes a character on the left of the cursor.
to the Privacy Policy but select "No" for this " ": Enters a space.
setting, the information will not be collected.
• Pressing CLR on the remote controller will remove all the input characters. Network Check ‐ 3. After inputting, select "OK" with the cursors and
You can check the network connection. Press ENTER when "Start" is displayed.
press ENTER. The input name will be saved.
• Wait for a while if "Network" cannot be selected. It will appear when the network feature is started.
AirPlay Password You can set a password of up to 31 characters so
that only registered users can use AirPlayR.
̇ 3� Bluetooth
1. Press ENTER to display the Edit screen. 2. Select a character or symbol with the cursors
Setting Item Default Value Setting Details and press ENTER.
Bluetooth On Select whether or not to use the BLUETOOTH Repeat it to input 31 or less characters.
function. "A/a": Switches between upper and lower
"On": Enables connection with a BLUETOOTH cases. (Pressing MODE on the remote
enabled device by using the BLUETOOTH controller also toggles between upper and
function. Select "On" also when making various lower cases.)
BLUETOOTH settings. "←" "→": Moves the cursor to the arrow direction.
"Off": When not using the BLUETOOTH function " ": Removes a character on the left of the cursor. " ": Enters a space.
• To select whether to mask the password
Auto Input Change
with "*" or display it in plain text, press MEMORY on the remote controller.
• Pressing CLR on the remote controller will remove all the input characters. 3. After inputting, select "OK" with the cursors and
press ENTER. The input password will be saved.
On The input of the unit will automatically be switched
to "BLUETOOTH" when connection is made from a BLUETOOTH enabled device to the unit. "On": The input will automatically become "BLUETOOTH" when a BLUETOOTH enabled device is connected. "Off": The function is disabled.
• If the input is not switched automatically, set to "Off" and change the input manually.

>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Setting Item Default Value Setting Details
Auto Reconnect On This function automatically reconnects to the BLUETOOTH enabled device connected last when you change the input to "BLUETOOTH". "On": Use this function "Off": Do not use this function
• This may not work with some BLUETOOTH enabled devices.
Pairing Information
Troubleshooting | Appendix ̇ 4� Power Management
Setting Item Default Value Setting Details
Sleep Timer Off Allows the unit to enter standby automatically when
the specified time elapses. Select a value from "30 minutes", "60 minutes", and "90 minutes". "Off": Does not turn the unit to standby automatically.
‐ You can initialize the pairing information saved on
Auto Standby On/Off This setting places the unit on standby this unit.
automatically after 20 minutes of inactivity without Pressing ENTER when "Clear" is displayed
any video or audio input. (When "Network Standby" initializes the pairing information stored in this unit.
is on, this becomes the HYBRID STANDBY mode
• This function does not initialize the pairing
which reduces the increase in power consumption information on the BLUETOOTH enabled
to a minimum.) device. When pairing the unit again with the
"On": The unit will automatically enter standby device, be sure to clear the pairing information
mode ("AUTO STBY" will light). on the BLUETOOTH enabled device in
"Off": The unit will not automatically enter standby advance. For information on how to clear the
mode. pairing information, refer to the BLUETOOTH
• "Auto Standby" is displayed on the display and enabled device's instruction manual.
TV screen 30 seconds before the Auto Standby
Device ‐ Displays the name of the BLUETOOTH enabled
device connected to the unit.
• The name is not displayed when "Status" is Status ‐ "Ready" and "Pairing".
Displays the status of the BLUETOOTH enabled device connected to the unit. "Ready": Not paired
Auto Standby in HDMI Standby Through
comes on.
• "Auto Standby" does not work when Zone 2/ Zone 3 is active.
• Default values vary depending on the regions.
Off Enable or disable "Auto Standby" while "HDMI
Standby Through" is on. "On": The setting will be enabled.
"Pairing": Paired "Connected": Successfully connected
"Off": The setting will be disabled.
• This setting cannot be set to "On" if "Auto Standby" and "HDMI Standby Through" are set
• Wait for a while if "Bluetooth" cannot be selected. It will appear when the BLUETOOTH function is
to "Off".
started up.
23

24>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Setting Item Default Value Setting Details
Network Standby On/Off When this feature is turned "On", you can turn
on the power of the unit via the network using an application such as Onkyo Remote that can control this unit.
• When "Network Standby" is used, the power consumption increases even when the unit is on standby. However, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only the essential circuit is operating.
• "Network Standby", which suppresses power consumption, may be disabled when the network connection is lost. Use the power button on the remote controller or main unit to turn the unit on if this happens.
• Default values vary depending on the regions.
Bluetooth Wakeup Off This function wakes up the unit on standby by
connecting a BLUETOOTH enabled device. "On": Use this function "Off": Do not use this function
• Setting to "On" increases the power consumption even when the unit is on standby. However, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only the essential circuit is operating.
• This setting is fixed to "Off" if "Bluetooth" - "Auto Input Change" is set to "Off".
• Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It will appear when the network feature is started.
̇ 5� 12V Trigger
Setting Item Default Value Setting Details
Zone Main Set which zone to output the 12V trigger when
playing. If you select "All", then the 12V trigger is output to all zones that are playing.
6� Multi Zone
Make settings related to Multi-zone Connection, such as the volume for the separate room.
̇ 1� Zone 2
Setting Item Default Value Setting Details
Output Level Fixed Select which of the integrated amplifier in a
separate room or this unit should be used to adjust the volume when Zone 2 is active. "Fixed": Adjust on the Integrated amplifier in a separate room "Variable": Adjust on the unit
Maximum Volume Off Set the maximum value for Zone 2 to avoid too
high volume. Select a value from "Off", "50" to "99". (When "3. Audio Adjust" - "Volume" - "Volume Display" is set to "Absolute")
Power On Volume Last Set the Zone 2 volume level of when this unit is
turned on. Select a value from "Last" (Volume level when the unit was turned off), "Min", "0.5" to "99.5" and "Max". (When "3. Audio Adjust" - "Volume" - "Volume Display" is set to "Absolute")
• You cannot set a higher value than that of "Maximum Volume".
̇ 2� Zone 3
Setting Item Default Value Setting Details
Output Level Fixed Select which of the integrated amplifier in a
separate room or this unit should be used to adjust the volume when Zone 3 is active. "Fixed": Adjust on the Integrated amplifier in a separate room "Variable": Adjust on the unit
Maximum Volume Off Set the maximum value for Zone 3 to avoid too
high volume. Select a value from "Off", "50" to "99". (When "3. Audio Adjust" - "Volume" - "Volume Display" is set to "Absolute")

>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Setting Item Default Value Setting Details
Power On Volume Last Set the Zone 3 volume level of when this unit is
turned on. Select a value from "Last" (Volume level when the unit was turned off), "Min", "0.5" to "99.5" and "Max". (When "3. Audio Adjust" - "Volume" - "Volume Display" is set to "Absolute")
• You cannot set a higher value than that of "Maximum Volume".
Troubleshooting | Appendix7� Miscellaneous
Change the frequency step for the tuner, update the firmware, and perform Initial Setup, etc.
̇ 1� Tuner
Setting Item Default Value Setting Details
AM / FM
10 kHz / 0.2 MHz Select a frequency step depending on your area of Frequency Step
residence. (North American
Select "10 kHz/0.2 MHz" or "9 kHz/0.05 MHz". models)
• When this setting is changed, all radio presets are deleted.
AM Frequency Step (European and Asian models)
25 9 kHz Select a frequency step depending on your area of
residence. Select "10 kHz" or "9 kHz".
• When this setting is changed, all radio presets are deleted.
AM Noise Cut Mode
1 You can improve reception sensitivity by changing this mode if you are finding AM broadcasts difficult to hear. Select "1" or "2".

26>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
̇ 2� Remote ID
Setting Item Default Value Setting Details
Remote ID 1 Select an ID for the unit's remote controller from "1", "2", and "3" to prevent interference between the unit and other ONKYO components that are installed in the same room. After changing the ID on the main unit, change the ID on the remote controller accordingly with the following procedure.
While holding down MODE, press the following numeric buttons for about 3 seconds.
• To change the remote controller ID to "1": 1 (MAIN button flashes once.)
• To change the remote controller ID to "2": 2 (MAIN button flashes twice.)
• To change the remote controller ID to "3": 3 (MAIN button flashes three times.)
̇3� Preamp Mode
If speakers are connected to the PRE OUT jacks on this unit via a power amplifier, you can reduce the power consumed by this unit by turning off the power supplied to the SPEAKERS terminals you are not using on this unit.
Setting Item Default Value Setting Details
Preamp Mode No Select the SPEAKERS terminals whose power you
want to turn off. "No": Power is supplied to all SPEAKERS terminals. Select when a power amplifier is not connected. "Front": Turns off the power for the SPEAKERS terminals for the front speakers. "Front + Center": Turns off the power for the SPEAKERS terminals for the front speakers and center speaker. "All": Turns off the power for all SPEAKERS terminals. Select when this unit is to be used as the pre-amplifier.
• This setting cannot be selected when bi-amp connection is used for speakers.

>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
̇ 4� Firmware Update
Setting Item Default Value Setting Details
Update Notice Enable Availability of a firmware update will be notified via
network. "Enable": Notify updates "Disable": Do not notify updates
Version ‐ The current firmware version will be displayed.
Update via NET
Troubleshooting | Appendix‐ Press ENTER to select when you want to update
the firmware via network.
• You will not be able to select this setting if you do not have Internet access or there is nothing to update.
Update via USB
27 ‐ Press ENTER to select when you want to update
the firmware via USB.
• You will not be able to select this setting if a USB storage device is not connected or there is nothing to update in the USB storage device.
• Wait for a while if "Firmware Update" cannot be selected. It will appear when the network feature is started.
̇ 5� Initial Setup
You can make the initial setup from the setup menu.
• Wait for a while if "Initial Setup" cannot be selected. It will appear when the network feature is started.
̇ 6� Lock
Setting Item Default Value Setting Details
Setup Parameter Unlocked Lock the Setup menu to protect the settings.
"Locked": The menu is locked. "Unlocked": The menu is unlocked.

28>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Initial Setup
When you turn the unit on for the first time after purchasing it, Initial Setup is automatically shown on the TV to enable you to make settings required for startup using simple operations following onscreen guidance.
English
Deutsch
Français
Español
Italiano
Nederlands
Svenska
Exit
• Calibration takes between 3 to 12 minutes to be completed. The speakers emit the test tone at high volume during measurement, so be careful of your surroundings. Keep the room as quiet as possible during measurement.
• When using THX certified speakers, THX recommends setting the crossover frequency to "80Hz(THX)". It is also recommended to manually adjust the settings for each speaker to suit the specific characteristics of each room.
• If the power of this unit suddenly turns off, the wires in the speaker cables may have touch the rear panel or other wires and tripped the protection circuit. Twist the wires again properly and make sure they do not stick out of the speaker terminals when connecting.
1. Place the supplied speaker setup microphone in the
listening position, and connect to the SETUP MIC jack on the main unit.
SETUP MIC
When putting the speaker setup microphone on a tripod, refer to the illustration when putting it in place.
• To cancel AccuEQ Room Calibration partway through, disconnect the speaker setup microphone.
2. Select the connected speaker configuration.
AccuEQ Room Calibration
Speaker Channels
7.1.2 ch<<>>
Subwoofer
2ch
Height 1 Speaker
Top Middle
Height 2 Speaker
---
Zone Speaker
No
Bi-Amp
No
Select how many speakers you have.
Next
The image on the screen changes as you choose the
Initial Setup
Language Select
number of channels in "Speaker Channels", so refer to it when performing the settings.
Also use this screen to select whether you have connected a subwoofer and to select the type of height speaker, etc.
• If you have connected a subwoofer, check the power and volume of the subwoofer. Set the subwoofer volume to more than halfway. 3. Test tones are emitted by the speakers, and firstly the
Operation: Select the item with the cursors of the remote controller and press ENTER to confirm your selection. To return to the previous screen, press .
unit detects the speakers connected and the noise in the environment. 4. After the results of the above measurements are
displayed, select "Next", press ENTER on the remote controller, and the test tones are emitted again, and the To redo Initial Setup:
unit automatically makes settings such as the optimum If you terminate the procedure on the way or want to
volume level and the crossover frequency. change a setting made during Initial Setup, press on the remote controller, select "7. Miscellaneous" - "Initial Setup", and press ENTER.
5. Select whether to enable or disable the equalizer function that corrects for distortion caused by the acoustic environment of the room.
̇ 1� AccuEQ Room Calibration
AccuEQ Room Calibration
Place the supplied speaker setup microphone in the listening position, measure the test tones emitted by the speakers, then the unit automatically sets the optimum volume level for each speaker, the crossover frequencies,
On (All Channels) and the distance from the listening position. This also
On (Except Front Left / Right) reduces the influence of standing waves to suit the
Off
listening environment, automatically adjusts the equalizers for the speakers, and enables correction of distortion caused by the acoustic environment of the room.
To enable equalizer for each speakers, select "On". Please select "All Channels", if you have same speakers for all channels. Please select "Except Front Left / Right", if front speakers are larger than other speakers.
Next
If this is to be enabled, then normally you should

>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix

select "On (All Channels)", and to disable just the front speakers you should select "On (Except Front Left / Right)".
6. Disconnect the speaker setup microphone. You cannot
use any other menu options while it is connected.
̇ 2� Source Connection
Check that each input source is connected correctly. Follow the guidance, select the input you want to confirm, start play of the selected player, and confirm that the images appear on the TV and that sound is played.
̇ 3� Network Connection
Set up Wi-Fi connection with an access point such as a wireless LAN router. There are the following two methods of connecting by Wi-Fi: "Scan Networks": Search for an access point from this unit. Find out the SSID of the access point beforehand. "Use iOS Device (iOS7 or later)": Share the iOS device's Wi-Fi settings with this unit.
If you select "Scan Networks", there are a further two choices of connection method. Check the following. "Enter Password": Enter the password (or key) of the access point to connect. "Push Button": If the access point has an automatic connection button, you can connect without entering a password.
• If the SSID of the access point is not displayed, then in the screen listing the SSIDs, select "Other..." with the cursor on the remote controller and press ENTER, then follow the onscreen instructions.
Keyboard input
Wi-Fi Setup
Password
a b c d e f g h i j k l m
n o p q r s t u v w x y z
1 2 3 4 5 6 7 8 9 0 - ^ \
A/a Ɵ ơ OK When finished, select the "OK" key. All Erase Hide/Show A/a To switch between upper and lower case, select "A/a" on the screen and press ENTER. To select whether to mask the password with "*" or display it in plain text, press MEMORY on the remote controller. Pressing CLR will delete all the input characters.
• A confirmation screen asking you to agree to the privacy policy is displayed during network setting. Select "Yes" and press ENTER to indicate agreement.
̇ 4� Multi Zone Setup
Make these settings to enjoy video and audio in a room other than the main room (ZONE 2/ZONE 3). Select "Using AV Receiver" when connecting speakers in the separate room. Select "with External Premain Amplifier" when connecting a pre-main amplifier in the separate room. Select "with External Power Amplifier" when connecting a power amplifier. If you are going to be connecting a TV in the separate room (ZONE 2), then when "Would you be using TV in 2nd room?" is displayed, select "Yes".
̇ 5� Audio Return Channel
If you have connected a TV that supports ARC, select "Yes". This unit's ARC setting turns on and you can listen to the TV's audio through this unit.

, . / ; : @ [ ]
• If you select "Yes", the HDMI CEC function is enabled and power consumption increases during standby.
29
30>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Quick Menu
You can quickly adjust settings you frequently use, such as tone adjustments, etc.
Operation: You can make the settings on the TV screen while playing something. Press Q on the remote controller to display the Quick Menu.
Quick Menu
Tone
Level
AccuEQ
Other
Adjust the speaker level of the center speaker while listening to some sound.
Subwoofer 1 / Subwoofer 2: Adjust the speaker level of the subwoofer while listening to some sound.
• The adjustment you made will be reset to the previous status when you turn the unit to standby mode.
̇ AccuEQ
AccuEQ Room Calibration: Enable or disable the equalizer function that corrects for distortion caused by the acoustic environment of the room. If this is to be enabled, then normally you should select "On (All Ch)", and to disable just the front speakers you should select "On (ex. L/R)". The setting can be separately set to each input selector.
Equalizer: Select "Preset 1" to "Preset 3" configured in "2. Speaker" - "Equalizer Settings" in the Setup menu. The same sound field setting is applied all ranges when set to "Off".
EQ for Standing Wave : Select whether to enable or disable the standing wave control calibrated in "2. Speaker" - "EQ for Standing Wave" in the Setup menu.
• It cannot be set if the listening mode is Pure Direct.
Re-EQ, Re-EQ(THX): Adjust the soundtrack that was processed to enhance its high pitch range, in order to make it suitable for home theater. In Re-EQ, the following listening modes can be used: Dolby Digital, Dolby Digital Plus, Dolby Surround, Dolby TrueHD, Multichannel, DTS, DTS-ES, DTS 96/24, DTS- HD High Resolution Audio, DTS-HD Master Audio, DTS Neural:X, DTS Express, and DSD. In Re-EQ(THX), the following listening modes can be used: THX Cinema, and THX Select2 Cinema.
• It cannot be set if the listening mode is Pure Audio or Direct.
̇ Other
A/V Sync : If the video is behind the audio, you can delay the audio to offset the gap. Different settings can be set for each input selector.
• It cannot be set if the listening mode is Pure Audio or Direct.
Music Optimizer: Improve the quality of the compressed audio. Playback sound of lossy compressed files such as MP3 will be improved. The setting can be separately set to each input selector. The setting is effective with 2 ch signals with a sampling frequency of 48 kHz or less. The setting is not effective in the bitstream signals. This function works in the Stereo, Mono, All Ch Stereo, and Full Mono listening
BD/DVD
modes.
Late Night: Make small sounds easily heard. It is useful when you need to reduce the volume while watching a movie late night. You can enjoy the effect only when playing Dolby series and DTS series input signals.
Select the item with the cursor / buttons of the remote controller and press ENTER to confirm your selection. Use the cursors to change the settings.
• To return to the previous screen, press .
• To exit the settings, press Q.
• The setting cannot be used in the following cases. – If "Loudness Management" is set to "Off" when
playing Dolby Digital Plus or Dolby TrueHD – When the input signal is DTS:X and "Dialog Control"
is other than 0 dB
Center Spread:
̇ Tone
Adjust the width of the sound field of the front channel when playing in the Dolby Surround listening mode. To Bass:
spread the width of the sound field to the left and right, set Enhance or moderate the bass range of all channels
to "On". To concentrate sound in the center, set to "Off". except the subwoofer channel.
• Depending on the speaker settings, this becomes "Off".
Treble:
Dialog Control: Enhance or moderate the treble range of all channels
You can increase the dialog portion of the audio in 1 dB except the subwoofer channel.
steps up to 6 dB so that you can make dialog easier to
• It cannot be set if the listening mode is Pure Audio, Direct or THX.
hear over background noise.
• This cannot be set for content other than DTS:X.
• The effect may not be selectable with some content. ̇ Level
Screen Centered Dialog: Center:
Front high speakers are used to move acoustic images such as dialogs from the center speakers upward Bass
Treble >> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
according to the height of the TV screen. Acoustic images of the center speakers move up as the set value is increased.
• Depending on the speaker settings, this becomes "Off".
• This item may not be available depending on the source being played and the selected listening mode.
HDMI Out: Allows you to select the HDMI jack to output video signals from "MAIN", "SUB", and "MAIN+SUB".
31
32>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Control Function Settings
You can enable the control functions between the unit and external devices. Special devices or cable connections are necessary to enable the functions. For more information about installation, contact a store specializing in these products.
̇ RS232 port
Use this port for connection with an integrated control system that can enable home automation. Some integrated control systems provide a centralized operation with a single touch panel controller in order to control audio and video home appliances and security devices together. For more information about adopting an integrated control system, contact the specialized stores.
̇ IR jack
If you use a commercially available multiroom remote control kit with this jack, you can operate the unit with the remote controller even when you are in a separate room, or operate the unit with the remote controller even if its remote control sensor is difficult to see.
Connecting IR receiver This unit block • Other companies may use indications other than IR on their products. Confirm in the instruction manual included with your components.
• Refer to the instruction manual of the IR receiver for the types of cables required for connection.
̇ 12V trigger output jack
You can enable power link operation when you connect the unit and an external device such as power amplifier equipped with 12V trigger input jack. When the desired input is selected on the unit, the power link operation will be activated with a control signal of maximum 12V/100mA output from the 12V TRIGGER OUT jack. You can select the zone to output the control signal in "5. Hardware" - "12V Trigger" in the Setup menu. For connection, use a monaural mini plug cable.
Remote controller
Main room
Zone Signal flow >> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Connecting a Power Amplifier
You can connect a power amplifier to the unit and use the unit as a pre-amplifier in order to produce a large volume that cannot be output with the unit only. Connect the speakers to the power amplifier. For details, refer to the power amplifier's instruction manual.
̇ Connections
1. Connect as below using the PRE OUT terminals.
Power amplifier
• Set to suit the number of speaker channels connected.
− Press on the remote controller to display
the Setup menu. Select "2. Speaker" - "Configuration" - "Speaker Channels" in order with the cursors, and set the number of speaker channels.
• You can reduce power consumption by turning off the power of the SPEAKERS terminals you are not using on this unit. Make the setting in "7.
Miscellaneous" - "Preamp Mode" in the Setup menu.
33
34>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Firmware Update
About Firmware Update
There are two methods for updating the firmware: via network and via USB. Use the one that best suits your environment.
• For the latest information on updates, visit our company's website. There is no need to update the firmware on this unit if there is no update available.
• Before updating, make sure that the speaker setup microphone is not connected.
• During an update, do not
– Disconnect and reconnect any cable, USB storage device, speaker setup microphone or headphones, or perform any operation on the component such as turn off its power – Accessing this unit from a PC or smartphone using
an application
• The update may take about 20 minutes to complete for either method: via network or via USB. Furthermore, existing settings are guaranteed regardless of the method used for update. Note that when this unit is connected to a network, you may see notifications about firmware updates on the display. To execute updating, select "Update Now" with the cursor buttons of the remote controller and press ENTER. The unit automatically turns itself into standby mode after "Completed!" appears on the display, and updating will be complete.
Disclaimer: The program and accompanying online documentation are furnished to you for use at your own risk. Our company will not be liable and you will have no remedy for damages for any claim of any kind whatsoever concerning your use of the program or the accompanying
online documentation, regardless of legal theory, and whether arising in tort or contract. In no event will our company be liable to you or any third party for any special, indirect, incidental, or consequential damages of any kind, including, but not limited to, compensation, reimbursement or damages on account of the loss of present or prospective profits, loss of data, or for any other reason whatsoever.
Updating the Firmware via Network
Preparation:
• Check that the unit is turned on, and the connection to the Internet is secured.
• Turn off the controller component (PC etc.) connected to the network.
• Stop any playing Internet radio, USB storage device, or server content.
• If the multi-zone function is active, turn it off.
• If "HDMI CEC" is set to "On", set it to "Off".
– Press on the remote controller. Then, after
selecting "5. Hardware" - "HDMI" and pressing ENTER, select "HDMI CEC" and select "Off". * The description may differ from the on-screen display but that will not
change the way to operate or the function.
̇ Update
1. Press on the remote controller.
The Setup menu is displayed on the TV screen.
Setup
1. Input/Output Assign
2. Speaker
3. Audio Adjust
4. Source
5. Hardware
6. Multi Zone
7. Miscellaneous
1. TV Out / OSD
2. HDMI Input
3. Video Input
4. Digital Audio Input
5. Analog Audio Input
2. Select "7. Miscellaneous" - "Firmware Update" -
"Update via NET" with the cursors in order, then press ENTER. >> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Setup
1. Input/Output Assign
2. Speaker
3. Audio Adjust
4. Source
5. Hardware
6. Multi Zone
7. Miscellaneous
Error Code
• ˎ-01, ˎ-10ɿ Ethernet cable not found. Connect the Ethernet cable properly.
• ˎ-02, ˎ-03, ˎ-04, ˎ-05, ˎ-06, ˎ-11, ˎ-13, ˎ-14, ˎ -16, ˎ-17, ˎ-18, ˎ-20, ˎ-21ɿ Internet connection error. Check the following:
– The router is turned on – This unit and the router are connected via the
network Try to disconnect and then connect again the power to the unit and router. This may solve the problem. If you are still unable to connect to the Internet, the DNS server or proxy server may be temporarily down. Check the service status with your ISP provider.
• Others Disconnect then reconnect the AC power cord, then repeat from the beginning.
Updating via USB
1. Tuner
Preparation:
2. Remote ID
• Prepare a 128MB or larger USB storage device. FAT16
3. Preamp Mode
or FAT32 file system format. 4. Firmware Update
5. Initial Setup
6. Lock
– Media inserted in a USB card reader may not be
used for this function. – USB storage devices with security function are not
supported. – USB hubs and USB devices with hub function are
• If "Firmware Update" is grayed out and cannot be
not supported. Do not connect these devices to the selected, wait for a while until it starts up.
unit.
• You will not be able to select "Update via NET" if
• Delete any data stored on the USB storage device. there is nothing to update.
• Turn off the controller component (PC etc.) connected
3. Press ENTER with "Update" selected to start update.
• During the update, the TV screen may go black depending on the updated program. In that case, check the progress on the display of the unit. The TV screen will remain black until the update is complete and the power is turned on again.
• "Completed!" is displayed when the update is complete.
to the network.
• Stop any playing Internet radio, USB storage device, or server content.
• If the multi-zone function is active, turn it off.
• If "HDMI CEC" is set to "On", set it to "Off".
– Press on the remote controller. Then, after
selecting "5. Hardware" - "HDMI" and pressing ENTER, select "HDMI CEC" and select "Off". * Some USB storage devices may take long to load, may not be loaded 4. Press ON/STANDBY on the main unit to turn the unit into standby mode. The process is completed and your firmware is updated to the latest version.
correctly, or may not be correctly fed depending on the device or their content. * Our company will not be liable whatsoever for any loss or damage of
data, or storage failure arising from the use of the USB storage device
• Do not use on the remote controller.
with this unit. Thank you for your understanding. * The description may differ from the on-screen display but that will not
change the way to operate or the function.
̇ Update
1. Connect the USB storage device to your PC. 2. Download the firmware file from our company's website
to your PC and unzip. Firmware files are named in the following way:
ONKAVR****_************.zip
̇ If an Error Message is Displayed
Unzip the file on your PC. The number of unzipped files and folders varies depending on the model. When an error occurs, "*-** Error!" is displayed on the display of the unit. ("*" represents an alphanumeric character.) Check the following:
3. Copy all unzipped files and folders to the root folder of
the USB storage device.
• Make sure to copy the unzipped files.
35
36>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
4. Connect the USB storage device to the USB port of the
unit.
• If you connect a USB hard disk drive to the USB port of the unit, we recommend that you use its AC adapter to power it.
• If the USB storage device has been partitioned, each section will be treated as an independent device.
5. Press on the remote controller.
The Setup menu is displayed on the TV screen.
Setup
1. Input/Output Assign
2. Speaker
3. Audio Adjust
4. Source
5. Hardware
6. Multi Zone
7. Miscellaneous
TV screen will remain black until the update is complete and the power is turned on again.
• During the update, do not turn off, or disconnect then reconnect the USB storage device.
• "Completed!" is displayed when the update is complete.
8. Disconnect the USB storage device from the unit. 9. Press ON/STANDBY on the main unit to turn the unit into standby mode. The process is completed and your firmware is updated to the latest version.
• Do not use on the remote controller.
1. TV Out / OSD
2. HDMI Input
3. Video Input
4. Digital Audio Input
5. Analog Audio Input
6. Select "7. Miscellaneous" - "Firmware Update" -
"Update via USB" with the cursors in order, then press ENTER.
̇ If an Error Message is Displayed
When an error occurs, "*-** Error!" is displayed on
Setup
the display of the unit. ("*" represents an alphanumeric character.) Check the following: 1. Input/Output Assign
2. Speaker
Error Code 3. Audio Adjust
• ˎ-01, ˎ-10ɿ 4. Source
5. Hardware
6. Multi Zone
USB storage device not found. Check whether the USB storage device or USB cable is correctly inserted to the
7. Miscellaneous
USB port of the unit. Connect the USB storage device to an external power source if it has its own power supply.
• ˎ-05, ˎ-13, ˎ-20, ˎ-21ɿ The firmware file is not present in the root folder of the USB storage device, or the firmware file is for another model. Retry from the download of the firmware file.
• Others Disconnect then reconnect the AC power cord, then repeat from the beginning. 1. Tuner
2. Remote ID
3. Preamp Mode
4. Firmware Update
5. Initial Setup
6. Lock
If "Firmware Update" is grayed out and cannot be selected, wait for a while until it starts up.
• You will not be able to select "Update via USB" if there is nothing to update.
7. Press ENTER with "Update" selected to start update.
• During the update, the TV screen may go black depending on the updated program. In that case, check the progress on the display of the unit. The >>>> Specifications Specifications>>>> Settings Settings>>>> Listening Listening Modes Modes>>>> Playback Playback Function Function>>>> Basic Basic Manual Manual
Troubleshooting Troubleshooting | | Appendix Appendix
Selecting Listening Modes
Select the optimum listening mode for movies, TV, music, and games by repeatedly pressing the MOVIE/TV, MUSIC, GAME and THX buttons.
1. During play, press one of the following four buttons on
the remote controller.
2. Press the selected button repeatedly to switch the
modes displayed on the display of the unit.
For details on the effects of each of the listening modes see "Listening Mode Effects". For listening modes selectable for each of the audio formats in the input signals, refer to "Selectable Listening Modes".
When you press PURE AUDIO on the front of the unit, the display and analog video circuits are turned off, and the unit switches to the Pure Audio listening mode to provide purer sound. Selecting this mode lights the PURE AUDIO indicator on the unit. Pressing the button again reselects the previous listening mode.
• Selecting the Pure Audio listening mode turns off the analog video circuitry, so the video signals input through the jacks other than the HDMI input jack cannot be displayed on the TV.
37
38>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Listening Mode Effects
In alphabetical order ̇ AllCh Stereo
Ideal for background music, this mode fills the entire listening area with stereo sound from the front, surround, and surround back speakers.
̇ Direct
This listening mode can be selected for all input signals. Processing that affects sound quality is shut down so sound closer to the original is reproduced. Speakers play the sound field according to the number of channels in the input signal, so there would be output from only the front speakers for a two-channel signal, for example.
̇ Dolby Atmos
This mode faithfully reproduces the sound design recorded in the Dolby Atmos audio format. The Dolby Atmos audio format has been implemented in movie theaters equipped with the latest facilities and enables a revolutionary sound experience in home theaters. Unlike existing surround systems, Dolby Atmos doesn't rely on channels, but rather enables the accurate placement of sound objects that have independent motion in a three-dimensional space with even greater clarity. Dolby Atmos is an optional audio format on Blu- ray Discs and achieves a three-dimensional sound field by introducing a sound field above the listener.
• To enable transfer of this audio format, connect via HDMI cable and set audio output on the player to bitstream output.
̇ Dolby D (Dolby Digital)
This mode faithfully reproduces the sound design recorded in the Dolby Digital audio format.
Dolby Digital is a multi-channel digital format developed by Dolby Laboratories, Inc. widely adopted for use in movie production. It is also a standard audio format on DVD-Video and Blu-ray Discs. It is possible to record a maximum of 5.1 channels on a DVD-Video or Blu-ray Disc; two front channels, a center channel, two surround channels, and the LFE channel dedicated to the bass region (sound elements for the subwoofer).
• To enable transfer of this audio format, connect via digital cable and set audio output on the player to bitstream output.
̇ Dolby Dɹ (Dolby Digital Plus)
This mode faithfully reproduces the sound design recorded in the Dolby Digital Plus audio format. The Dolby Digital Plus format is a revision based on Dolby Digital, increasing the number of channels and endeavoring to improve sound quality by giving more flexibility in data bit rates. Dolby Digital Plus is used as an optional audio format on Blu-ray Discs, based on 5.1ch, but with additional channels such as the surround back channel added for a maximum of 7.1ch.
• To enable transfer of this audio format, connect via HDMI cable and set audio output on the player to bitstream output.
̇ Dolby Surround
These listening modes allow you to expand the playback signal to a maximum of 11 channels to suit the connected speaker configuration when the input signal is 2 channels or 5.1 channels. Dolby surround is a next generation surround technology that intelligently up mixes stereo; 5.1 and 7.1 content for playback through your surround speaker system. Dolby surround is compatible with traditional speaker layouts, as well as Dolby Atmos enabled playback systems that employ inceiling speakers or products with Dolby speaker technology.
̇ Dolby TrueHD
This mode faithfully reproduces the sound design recorded in the Dolby TrueHD audio format. The Dolby TrueHD audio format is a reversible format
expanded based on the lossless compression technology referred to as MLP, and it makes it possible to faithfully reproduce the master audio recorded in the studio. Dolby TrueHD is used as an optional audio format on Blu-ray Discs, based on 5.1ch, but with additional channels such as the surround back channel added for a maximum of 7.1ch. 7.1ch is recorded at 96 kHz/24bit, and 5.1ch is recorded at 192 kHz/24bit.
• To enable transfer of this audio format, connect via HDMI cable and set audio output on the player to bitstream output.
̇ DSD
Mode suitable for playing sources recorded in DSD.
• This unit supports DSD signals input through HDMI IN. However, depending on the connected player, better sound is possible when output from the PCM output of the player.
• This listening mode cannot be selected if the output setting on your Blu-ray Disc/DVD player is not set to DSD.
̇ DTS
This mode faithfully reproduces the sound design recorded in the DTS audio format. The DTS audio format is a multi-channel digital format developed by DTS, Inc. This format is an optional audio format on DVD-Video and a standard on Blu-ray Discs. It enables recording of 5.1 channels; two front channels, a center channel, two surround channels, and the LFE channel dedicated to the bass region (sound elements for the subwoofer). The content is recorded with a rich volume of data, with maximum sampling rate of 48 kHz at a resolution of 24 bits and a bit rate of 1.5 Mbps.
• To enable transfer of this audio format, connect via digital cable and set audio output on the player to bitstream output.
̇ DTS 96/24
This mode faithfully reproduces the sound design recorded in the DTS 96/24 audio format. The DTS 96/24 format is an optional audio format on >> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix

DVD-Video and Blu-ray Discs. It enables recording of 5.1 channels; two front channels, a center channel, two surround channels, and the LFE channel dedicated to the bass region (sound elements for the subwoofer). Detailed reproduction is achieved by recording the content at a sampling rate of 96 kHz at a resolution of 24 bits.
• To enable transfer of this audio format, connect via digital cable and set audio output on the player to bitstream output.
̇ DTS Express
This mode faithfully reproduces the sound design recorded in the DTS Express audio format. DTS Express is used as an optional audio format on Blu- ray Discs, based on 5.1ch, but with channels such as the surround back channel added for a maximum of 7.1ch. It also supports low bit rates.
• To enable transfer of this audio format, connect via HDMI cable and set audio output on the player to bitstream output.
̇ DTS-HD HR (DTS-HD High Resolution Audio)
This mode faithfully reproduces the sound design recorded in the DTS-HD High Resolution Audio audio format. DTS-HD High Resolution Audio is used as an optional audio format on Blu-ray Discs, based on 5.1ch, but with additional channels such as the surround back channel added for a maximum of 7.1ch. It can be recorded at a sampling rate of 96 kHz with a resolution of 24 bits.
• To enable transfer of this audio format, connect via HDMI cable and set audio output on the player to bitstream output.
̇ DTS-HD MSTR (DTS-HD Master Audio)
This mode faithfully reproduces the sound design recorded in the DTS-HD Master Audio audio format. DTS-HD Master Audio is used as an optional audio format on Blu-ray Discs, based on 5.1ch, but with additional channels such as the surround back channel added for a maximum of 7.1ch, recorded using lossless audio reproduction technology. 96 kHz/24bit is supported with 7.1ch, and 192 kHz/24bit is supported with 5.1ch.
• To enable transfer of this audio format, connect via HDMI cable and set audio output on the player to bitstream output.
̇ DTS Neural:X
This listening mode allows you to expand the playback signal to a maximum of 11ch to suit the connected speaker configuration when the input signal is 2 channels or 5.1 channels. Neural:X enables upmixing of legacy content such as mono, stereo, 5.1 or 7.1ch to many higher speaker count including the layout using elevated channels set for DTS:X playback.
̇ DTS:X
This mode faithfully reproduces the sound design recorded in the DTS:X audio format. The DTS:X audio format is a combination of the mixing methodology based on past channel based formats (5.1ch and 7.1ch) and object based dynamic audio mixing, and it is characterized by the precise positioning of sounds and the ability to express movement. DTS:X is DTS's next-generation object-based surround sound technology that includes height to deliver a fully-immersive listening experience to your living room.
• To enable transfer of this audio format, connect via HDMI cable and set audio output on the player to bitstream output.
̇ ES Discrete (DTS-ES Discrete)
This mode faithfully reproduces the sound design recorded in the DTS-ES Discrete audio format. DTS-ES Discrete is used as an optional audio format on DVD-Video and Blu-ray Discs, based on 5.1ch, but with an additional monaural surround back channel added for a maximum of 6.1ch.
• To enable transfer of this audio format, connect via digital cable and set audio output on the player to bitstream output.
̇ ES Matrix (DTS-ES Matrix)
This mode faithfully reproduces the sound design recorded
in the DTS-ES Matrix audio format. DTS-ES Matrix is used as an optional audio format on DVD-Video and Blu-ray Discs, based on 5.1ch, but with a monaural surround back channel included by matrix encoding. The matrix decoder on this unit decodes this during playback to produce 6.1 channels.
in the DTS-ES Matrix audio format. DTS-ES Matrix is used as an optional audio format on DVD-Video and Blu-ray Discs, based on 5.1ch, but with a monaural surround back channel included by matrix encoding. The matrix decoder on this unit decodes this during playback to produce 6.1 channels.
in the DTS-ES Matrix audio format. DTS-ES Matrix is used as an optional audio format on DVD-Video and Blu-ray Discs, based on 5.1ch, but with a monaural surround back channel included by matrix encoding. The matrix decoder on this unit decodes this during playback to produce 6.1 channels.
in the DTS-ES Matrix audio format. DTS-ES Matrix is used as an optional audio format on DVD-Video and Blu-ray Discs, based on 5.1ch, but with a monaural surround back channel included by matrix encoding. The matrix decoder on this unit decodes this during playback to produce 6.1 channels.
• To enable transfer of this audio format, connect via digital cable and set audio output on the player to bitstream output.
• To enable transfer of this audio format, connect via digital cable and set audio output on the player to bitstream output.
̇ Full Mono
̇ Full Mono
In this mode, all speakers output the same sound in mono, so the sound you hear is the same regardless of where you are within the listening room.
In this mode, all speakers output the same sound in mono, so the sound you hear is the same regardless of where you are within the listening room.
In this mode, all speakers output the same sound in mono, so the sound you hear is the same regardless of where you are within the listening room.
̇ Game-Action
̇ Game-Action
In this mode, sound localization is distinct with emphasis on bass.
In this mode, sound localization is distinct with emphasis on bass.
In this mode, sound localization is distinct with emphasis on bass.
̇ Game-Rock
̇ Game-Rock
In this mode, sound pressure is emphasized to heighten live feel.
In this mode, sound pressure is emphasized to heighten live feel.
̇ Game-RPG
̇ Game-RPG
In this mode, the sound has a dramatic feel with a similar atmosphere to Orchestra mode.
In this mode, the sound has a dramatic feel with a similar atmosphere to Orchestra mode.
̇ Game-Sports
̇ Game-Sports
Suitable for audio source with much reverberation.
Suitable for audio source with much reverberation.
Suitable for audio source with much reverberation.
Suitable for audio source with much reverberation.
̇ Mono
̇ Mono
Use this mode when watching an old movie with a mono soundtrack, or use it to separately reproduce soundtracks in two different languages recorded in the left and right channels of some movies. It is also suitable for DVDs or other sources containing multiplexed audio.
Use this mode when watching an old movie with a mono soundtrack, or use it to separately reproduce soundtracks in two different languages recorded in the left and right channels of some movies. It is also suitable for DVDs or other sources containing multiplexed audio.
Use this mode when watching an old movie with a mono soundtrack, or use it to separately reproduce soundtracks in two different languages recorded in the left and right channels of some movies. It is also suitable for DVDs or other sources containing multiplexed audio.
Use this mode when watching an old movie with a mono soundtrack, or use it to separately reproduce soundtracks in two different languages recorded in the left and right channels of some movies. It is also suitable for DVDs or other sources containing multiplexed audio.
Use this mode when watching an old movie with a mono soundtrack, or use it to separately reproduce soundtracks in two different languages recorded in the left and right channels of some movies. It is also suitable for DVDs or other sources containing multiplexed audio.
̇ Multich (Multichannel)
̇ Multich (Multichannel)
Mode suitable for playing sources recorded in multichannel PCM.
Mode suitable for playing sources recorded in multichannel PCM.
Mode suitable for playing sources recorded in multichannel PCM.
39

40>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
̇ Orchestra
Suitable for classical or operatic music. This mode emphasizes the surround channels in order to widen the stereo image, and simulates the natural reverberation of a large hall.
̇ Pure Audio
This mode reproduces the original sound more faithfully. The display and analog video circuit are turned off to provide purer sound.
• Selecting this mode turns off the analog video circuitry, so the video signals input through the jacks other than the HDMI input jack cannot be displayed on the TV.
• This cannot be selected when using the Multi-zone feature. Activating the Multi-zone feature while this mode is selected automatically switches the listening mode to Direct.
̇ Stereo
In this mode, sound is output from the front left and right speakers and subwoofer.
̇ Studio-Mix
Suitable for rock or pop music. Listening to music in this mode creates a lively sound field with a powerful acoustic image, like being at a club or rock concert.
̇ T-D (Theater-Dimensional)
In this mode, you can enjoy a virtual playback of multichannel surround sound even with only two or three speakers. This works by controlling how sounds reach the listener's left and right ears.
̇ THX
THX is a series of specifications for the accurate reproduction of movies propounded by the film director George Lucas. THX listening modes include the THX Cinema mode, and using technology such as THX Loudness Plus and Timbre Matching, the sound of a movie theater is reproduced accurately.
THX technology: A movie soundtrack is mixed in large-scale theater specially made for mixing that is called a dubbing stage on the assumption that the soundtrack is played in such theaters with similar equipment and conditions. These sound tracks are recorded as is, even when recording to a DVD-Video, for example, without making any modifications to suit a home theater. THX technology is able to reproduce the theater sound in a home theater environment by minimizing acoustic and spatial deviation.
• THX Loudness Plus THX Loudness Plus is a new volume control technology featured in THX Ultra2 Plus and THX Select2 Plus certified AV receivers. With THX Loudness Plus, home theater audiences can experience the rich details of surround sound at any volume level. If the volume is turned down below the reference level, elements of sound in a certain range are lost or the sound is perceived differently by audience. THX Loudness Plus compensates for the tonal and spatial shifts that occur when the volume level is reduced, by intelligently correcting the levels of the surround channels and their frequency response in the environment.
• Re-EQ The speakers for the front channel are installed behind the screen in a movie theater. For this reason the high range is enhanced in the front channel of the sound track to take account of acoustic characteristics such as the necessity to penetrate the screen. Re-EQ adjusts soundtrack with enhanced high range to make it suitable for home theater.
• Timbre Matching The perception of the human ear differs depending on the direction of the sound. Movie theaters have many surround speakers installed so they are great at surrounding the viewer with natural sound, but home theaters have only two surround speakers installed. The Timbre Matching function filters the signals sent to the surround speakers and adjusts the tonal characteristics of front speakers and surround speakers to create smooth sound movement from front speakers to surround speakers.
• Adaptive Decorrelation
Although movie theaters have many surround speakers to surround the room with sound, home theaters normally have only two surround speakers. Such two surround speakers give a headphone-like sound, not a broad and embracing surround sound. If the listener moves away from the middle of the surround speakers, sound from the surround speakers mixes with that from the near speakers and cannot be distinguished any more. Adaptive Decorrelation slightly changes the time axis and phase between the surround channels so you can enjoy the same kind of breadth of sound you can in a movie theater even with only two surround speakers.
• ASA (Advanced Speaker Array) ASA is a technology patented by THX to provide a broad surround sound experience by adjusting the side and back surround speaker sounds respectively. When installing the surround back speakers, first select the distance between the two surround back speakers in the THX Audio settings. This setting optimizes the surround sound environment.
THX listening modes:
– THX Cinema: Use in a home theater environment
for playing a soundtrack that was recorded with the intention of it being played in a movie theater or similar large area. In this mode, THX Loudness Plus is set to the theater level and Re-EQ, Timbre Matching, and Adaptive Decorrelation are all enabled.
– THX Games: Use for high-fidelity spatial reproduction of game sound. THX Loudness Plus is set to a level suited to the audio level of the game and Timbre Matching is enabled.
– THX Music : Use mainly for music sources that are
clearly mastered to a much higher quality than movie audio. THX Loudness Plus is set to a level suited to the playback of music and Timbre Matching is enabled.
– THX S2 Cinema (THX Select2 Cinema): The THX
Select2 Cinema mode provides a high-quality surround sound experience by expanding movie sources recorded in 5.1 ch for 7.1 ch playback. In this mode, the THX ASA processing technology gives smooth transition between side and back surround sounds

>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
creating the best atmosphere and directional sense of surround sound.
– THX S2 Games (THX Select2 Games): Select the THX
Select2 Games mode to play game sound recorded in a multichannel format. In this mode, the THX ASA processing technology creates a 360-degree sound field with game sound recorded in PCM, DTS, Dolby Digital and other 5.1 ch formats.
– THX S2 Music (THX Select2 Music): Select THX
Select2 Music to play music sources recorded in a multichannel format. In this mode, the THX ASA processing technology creates a broad and stable back sound field for music sources recorded in 5.1ch such as DTS, Dolby Digital, and DVD-Audio.
̇ TV Logic
Suitable for TV shows produced in a TV studio. This mode enhances the surround effects to the entire sound to give clarity to voices and create a realistic acoustic image.
̇ Unplugged
Suitable for acoustic instruments, vocals and jazz. This mode emphasizes the front stereo image, giving the impression of being right in front of the stage.
41
42>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Selectable Listening Modes
You can select a variety of listening modes to suit the audio format of the signal being input. Refer to the following for the listening mode choices.
• Listening modes available when headphones are connected are: Pure Audio, Mono, Direct, and Stereo. Only Mono or Stereo can be selected when the input signal is DSD.
̇ MOVIE/TV button
This is a list of listening modes you can select according to the audio format of the input signal.
Input Format Listening Mode
Analog Direct
Mono
Dolby Surround
DTS Neural:X
THX Cinema∗1
TV Logic∗2
AllCh Stereo∗3
Full Mono∗3
T-D
∗1 Surround speakers need to be installed. ∗2 Surround speakers or height speakers need to be installed. ∗3 A center speaker, surround speakers, or height speakers need to be
installed.
Input Format Listening Mode
PCM Music files (except DSD/ Dolby TrueHD)
Input Format Listening Mode
Multich PCM Direct
Multich∗1
Dolby Surround∗2
DTS Neural:X
THX Cinema∗3
THX S2 Cinema∗4
TV Logic∗5
AllCh Stereo∗6
Full Mono∗6
T-D
∗1 A center speaker or surround speakers need to be installed. ∗2 Cannot be selected when the input format is 1.1 ch or 2.1 ch. ∗3 Surround speakers need to be installed. ∗4 Surround back speakers need to be installed. Can be selected when the
input format is 5.1 ch. ∗5 Surround speakers or height speakers need to be installed. ∗6 A center speaker, surround speakers, or height speakers need to be
installed.
Direct
Mono
Dolby Surround
DTS Neural:X
THX Cinema∗1
TV Logic∗2
AllCh Stereo∗3
Full Mono∗3
T-D
∗1 Surround speakers need to be installed. ∗2 Surround speakers or height speakers need to be installed. ∗3 A center speaker, surround speakers, or height speakers need to be
installed. >> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix

Input Format Listening Mode
DSD Direct
DSD∗1 ∗2
Dolby Surround
DTS Neural:X
THX Cinema∗3
THX S2 Cinema∗4
TV Logic∗5
AllCh Stereo∗6
Full Mono∗6
T-D
∗1 Cannot be selected when the input format is monaural or 2 ch. ∗2 A center speaker or surround speakers need to be installed. ∗3 Surround speakers need to be installed. ∗4 Surround back speakers need to be installed. Can be selected when the
input format is 5.1 ch. ∗5 Surround speakers or height speakers need to be installed. ∗6 A center speaker, surround speakers, or height speakers need to be
installed.
Input Format Listening Mode
Input Format Listening Mode
Dolby D Direct
Dolby D∗1 ∗2
Dolby Surround∗3
THX Cinema∗4
THX S2 Cinema∗5
TV Logic∗6
AllCh Stereo∗7
Full Mono∗7
T-D
∗1 Cannot be selected when the input format is 2 ch. ∗2 A center speaker or surround speakers need to be installed. ∗3 Cannot be selected when the input format is 1.1 ch or 2.1 ch. ∗4 Surround speakers need to be installed. ∗5 Surround back speakers need to be installed. Can be selected when the
input format is 5.1 ch. ∗6 Surround speakers or height speakers need to be installed. ∗7 A center speaker, surround speakers, or height speakers need to be
installed.
Input Format Listening Mode
Input Format Listening Mode
Dolby D+ Direct
Dolby D+ Direct
Dolby D+∗1 ∗2
Dolby D+∗1 ∗2
Dolby Surround∗3
Dolby Surround∗3
THX Cinema∗4
THX Cinema∗4
THX S2 Cinema∗5
THX S2 Cinema∗5
TV Logic∗6
TV Logic∗6
AllCh Stereo∗7
AllCh Stereo∗7
Full Mono∗7
Full Mono∗7
T-D
T-D
∗1 Cannot be selected when the input format is 2 ch. ∗2 A center speaker or surround speakers need to be installed. ∗3 Cannot be selected when the input format is 1.1 ch or 2.1 ch. ∗4 Surround speakers need to be installed. ∗5 Surround back speakers need to be installed. Can be selected when the
∗1 Cannot be selected when the input format is 2 ch. ∗2 A center speaker or surround speakers need to be installed. ∗3 Cannot be selected when the input format is 1.1 ch or 2.1 ch. ∗4 Surround speakers need to be installed. ∗5 Surround back speakers need to be installed. Can be selected when the
∗1 Cannot be selected when the input format is 2 ch. ∗2 A center speaker or surround speakers need to be installed. ∗3 Cannot be selected when the input format is 1.1 ch or 2.1 ch. ∗4 Surround speakers need to be installed. ∗5 Surround back speakers need to be installed. Can be selected when the
input format is 5.1 ch. ∗6 Surround speakers or height speakers need to be installed. ∗7 A center speaker, surround speakers, or height speakers need to be
input format is 5.1 ch. ∗6 Surround speakers or height speakers need to be installed. ∗7 A center speaker, surround speakers, or height speakers need to be
input format is 5.1 ch. ∗6 Surround speakers or height speakers need to be installed. ∗7 A center speaker, surround speakers, or height speakers need to be
installed.
installed.
Dolby Atmos
• You can select the Dolby Digital Plus or Dolby TrueHD listening modes if a surround back speaker or height speaker is not connected.
Direct
Dolby Atmos
TV Logic
AllCh Stereo
Full Mono
T-D
43

44>> Specifications>> Settings>> Listening Modes>> Playback Function>> Basic Manual
Troubleshooting | Appendix
Input Format Listening Mode
Dolby TrueHD Direct
Dolby TrueHD∗1 ∗2
Dolby Surround∗3
THX Cinema∗4
THX S2 Cinema∗5
TV Logic∗6
AllCh Stereo∗7
Full Mono∗7
T-D
∗1 Cannot be selected when the input format is 2 ch. ∗2 A center speaker or surround speakers need to be installed. ∗3 Cannot be selected when the input format is 1.1 ch or 2.1 ch. ∗4 Surround speakers need to be installed. ∗5 Surround back speakers need to be installed. Can be selected when the
input format is 5.1 ch. ∗6 Surround speakers or height speakers need to be installed. ∗7 A center speaker, surround speakers, or height speakers need to be
installed.
Input Format Listening Mode
DTS Direct
DTS∗1 ∗2
DTS Neural:X
THX Cinema∗3
THX S2 Cinema∗4
TV Logic∗5
AllCh Stereo∗6
Full Mono∗6
T-D
∗1 Cannot be selected when the input format is 2 ch. ∗2 A center speaker or surround speakers need to be installed. ∗3 Surround speakers need to be installed. ∗4 Surround back speakers need to be installed. Can be selected when the
input format is 5.1 ch. ∗5 Surround speakers or height speakers need to be installed. ∗6 A center speaker, surround speakers, or height speakers need to be
installed.
Input Format Listening Mode
DTS 96/24 Direct
DTS 96/24∗1 ∗2
THX Cinema∗3
THX S2 Cinema∗4
TV Logic∗5
AllCh Stereo∗6
Full Mono∗6
T-D
∗1 Cannot be selected when the input format is 2 ch. ∗2 A center speaker or surround speakers need to be installed. ∗3 Surround speakers need to be installed. ∗4 Surround back speakers need to be installed. Can be selected when the
input format is 5.1 ch. ∗5 Surround speakers or height speakers need to be installed. ∗6 A center speaker, surround speakers, or height speakers need to be
installed.


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply