NUVO SR-120 (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD NUVO SR-120 (01) PDF MANUAL


PDF Content Summary: SR-60 SR-80 SR-120 Owner’s Manual 1 TABLE OF CONTENTS Important Safety Instructions 3-5 Parts—Exploded View & Identification SR-60 6-7 SR-80 8 SR-120 9 Introduction SR-60 10-11 SR-80 12-13 SR-120 14-15 SR-Series Cabinet Stand SR-60 16 SR-80 17 SR-120 18-19 Maintenance Procedures 20-21 Warranty Information 22 Owners Product Information 23 2 WARNING To guard against injury, basic safety precautions should be observed including the following: READ ALL SAFETY INSTRUCTIONS BEFORE USE. To avoid electric shock, special care should be taken since water is employed in the use of aquarium equipment. For each of the following situations, do not attempt to repair yourself. Return the appliance to an authorized service facility for service or discard the appliance. • If the appliance falls into water, DO NOT reach for it! First unplug it an then retrieve it. If the electrical components of the appliance get wet, unplug the appliance immediately. • Carefully examine the appliance after installation. It should not be plugged in if there is water on parts not intended to be wet. • Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or if it is dropped or damaged in any man- ner. • To avoid the possibility of the appliance plug or receptacle getting wet, position aquarium to one side of a wall mounted receptacle to prevent water from dripping onto the receptacle plug. A “Drip Loop” should be arranged by the user for EACH cord connecting an aquarium appliance to a recepta- cle. The “Drip Loop” is that part of the cord below the level of the re- ceptacle or the connector if an ex- tension cord is used. This “Drip Loop” prevents water travelling along the cord and coming in con- tact with the receptacle. If the plug or the receptacle do get wet DO NOT unplug the cord. Disconnect the fuse to the circuit breaker that supplies power to the appliance. Then unplug and examine for the presence of water in the receptacle. • Close supervision is necessary when any appliance is used by or near children. • To avoid injury, do not contact moving parts or hot parts such as heaters, reflectors, lamps bulbs and etc. • Always unplug an appliance from the outlet when not in use, be- fore putting on or taking off parts, and before cleaning. Never yank the cord to pull plug from outlet. Grasp the plug and pull to disconnect. 3 • Do not use an appliance for other than intended use. The use of attachments not recommended or sold by the appliance manufacturer may cause an unsafe condition. • Make sure an appliance mounted on a tank is securely installed before operating it. • Read and observe all the important notices on the appliance. • This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electri- cian. Never use with an extension cord unless plug can be fully inserted. Do not attempt to defeat this safety feature. • This appliance is intended FOR HOUSEHOLD USE ONLY. FINDING A LOCATION • Find a location that can handle the weight of your NUVO SR- Series Model Tank & Stand (lbs) • Do not install or store the aquarium where it will be exposed to the weather or to temperatures below freezing. • Do not place aquarium in direct sunlight or near heater vents. • We recommend ambient room temperature around 25° C/ 77° F. • Place aquarium 5-6” away from the wall to allow access to the back if needed • Make sure surrounding appliances are waterproof and move anything that might be damaged by salt creep. ASSEMBLY • Upon arrival your tank and stand will be preassembled. If your tank or stand is disassembled please contact Innovative Marine for further assistance. 1-866-368-7941. Tank & Stand (kg) SR-60 119 + 143 lbs 53.97 + 64.86 kg SR-80 165 + 211 lbs 74.84 + 95.70 kg SR-120 289 + 304 lbs 131.08 + 137.89 kg 4 LEAK TESTING AND FILLING YOUR NUVO AQUARIUM • Find a good location to test your aquarium. • Your location should be level, flat and should not be in a place where can be damaged in case of a leak. (Garage or covered patio) • Slowly fill your aquarium from the display portion of the tank and let the water naturally enter the overflows. • Plug in your pumps and continue adding water until your water line reaches about 1” under the last baffle wall in the back of the aquarium • Check every 8 hours over the next 24 hours for leaks. If any leaks have been detected please contact your authorized Innovative Marine Dealer immediately. PLACING AND LEVELING YOUR NUVO AQUARIUM • Make sure your NUVO is set on a level surface to prevent undue stress on the aquarium tank from stress and leaks. • It is not recommended that this aquarium is set upon coffee ta- bles, end tables, TV stands, or night stands unless the structure has been properly tested to withstand the weight limits of the aquarium. • Please pay special attention when leveling your aquarium on car- pet. • Before lifting your aquarium, make sure your stand is in position and your leveling mat is properly adhered to the top of your stand. • Lifting the glass aquarium onto its stand will require more than two people. Please use proper lifting techniques when lifting large heavy objects. • Lift from the bottom of the aquarium DO NOT lift using the aquari- ums’ glass edges this will cause stress on the glass and seals and may cause leakage. • The back of the aquarium should be flush with your stand and all four corners are not overhanging the edges. • Once you have placed your aquarium atop your stand, make sure your stand has not moved from its position. • Place a level on edge of tank, if necessary readjust and reposi- tion tank and stand. 5 NUVO SR “Shallow Reef” Aquariums are the newest additions to our multiple award winning rimless All-In-One aquariums. The NUVO SR-Series is the next evolution into the world of Full- Sized all-in-one aquariums that exude iconic minimalistic design, unmatched quality, unrivaled performance and simple turn-key maintenance. NUVO SR-Series Aquariums are constructed from low iron glass for stunning clarity and is paired with (2) 200 micron filter socks that remove detritus and organic waste resulting in im- maculate water quality. 6 SR-60 Model #: 0701 # Description Item Code 1 Glass Tank 60 Gallons 070101 2 4” Micron Filter Sock Holder 070100 3 4” Micron Filter Sock 9001 4 60g Return Pump 030001 5 “Y” Connector 030002 6 Return Hose 030002 7 Return Nozzle 000012 8 Return Elbows 030002 9 Mesh Screen Clips 070103 10 Mesh Screen Top 070104 7 SR-80 Model #: 0702 # Description Item Code 1 Glass Tank 80 Gallons 070201 2 4” Micron Filter Sock Holder 070100 3 4” Micron Filter Sock 9001 4 80g Return Pump 030001 5 “Y” Connector 030002 6 Return Hose 030002 7 Return Nozzle 000012 8 Return Elbows 030002 9 Mesh Screen Clips 070203 10 Mesh Screen Top 070204 8 SR-120 Model #: 0703 # Description Item Code 1 Glass Tank 120 Gallons 070301 2 4” Micron Filter Sock Holder 070100 3 4” Micron Filter Sock 9001 4 120g Return Pump 030001 5 “Y” Connector 030002 6 Return Hose 030002 7 Return Nozzle 000012 8 Return Elbows 030002 9 Mesh Screen Clips 070303 10 Mesh Screen Top 070304 9 SR-60 Features: DIMS: Length 35.43” Width: 23.62” Height: 16.14” 10mm High Clarity Low Iron Glass Mesh Screen Top with Clips Dual Built-in Overflows (2) - Removable 200 Micron Filter Socks (2) - 25W 110v/60Hz 317 GPH Return Pumps Includes flexible hose and return elbows Dual Directional Flow Nozzle 10 SR-60 FILTRATION 1 1

2 3 5 4 2 2 4 5 3 3 2 2 2

1. Removable 200 Micron Filter Sock 2. Filter Sock Column 3. Skimmer & Media Reactor Column 4. Heater/ Media Reactor Column 5. Return Pump/Water Reservoir Column (ATO Sensor Column) (Heater, Skimmer, Media Reactor not included) 11 SR-80 Features: DIMS: Length 47.24” Width: 23.62” Height: 16.14” 12mm High Clarity Low Iron Glass Mesh Screen Top with Clips Dual Built-in Overflows (2) - Removable 200 Micron Filter Socks (2) - 45W 110v/60Hz 476 GPH Return Pumps Includes flexible hose and return elbows Dual Directional Flow Nozzle 12 SR-80 FILTRATION 1 1 2 3 5 4 2

2 4 5 5 3 2 3 2 3 2

1. Removable 200 Micron Filter Sock 2. Filter Sock Column 3. Skimmer & Media Reactor Column 4. Heater/ Media Reactor Column 5. Return Pump/ Water Reservoir Column (ATO Sensor Column) (Heater, Skimmer, Media Reactor not included) 13 SR-120 Features: DIMS: Length 70.87” Width: 23.62” Height: 16.14” 15mm High Clarity Low Iron Glass Mesh Screen Top with Clips Dual Built-in Overflows (2) - Removable 200 Micron Filter Socks (3) - 45W 110v/60Hz 467 GPH Return Pumps Includes flexible hose and return elbows Dual Directional Flow Nozzle 14 SR-120 FILTRATION 1 1 2 3 5 4 2

2 4 5 3 2 3 2

1. Removable 200 Micron Filter Sock 2. Filter Sock Column 3. Skimmer & Media Reactor Column 4. Heater/ Media Reactor Column 5. Return Pump/ Water Reservoir Column (ATO Sensor Column) (Heater, Skimmer, Media Reactor not included) 15

2 2 1. Storage Space 2. Cord Ports 16 Assembled Stands 1

2 1 2 1. Storage Space 2. Cord Ports 17

1 1. Storage Space 2. Cord Ports Assembled Stands 2 2 18

19 Regular maintenance is necessary to keep successful aquarium. PLEASE NOTE: Unplug pumps before water changes or replacing filter sock and/or media. WATER CHANGES Water changes should be performed once every 2 to 4 weeks depending on the bio-load. A minimum of a 25% water change is essential to keep dissolved organic to a minimum. REPLACING FILTER SOCK Filter socks should be replaced every 2 to 4 weeks to remove trapped debris and free floating particulate matter. • Lift the Filter Sock Holder out from the Filter Column. • Remove Filter Sock from Filter Sock Holder • Replace with a 4 Inch Innovative Marine Filter Sock. We recommend using Innovative Marine’s 4” Filter Sock (Part #9001) for optimal ring fit and to prevent bypass that may occur by other manufactures filter socks. PLEASE NOTE: Even though our socks are Pre Rinsed please rinse socks under RO water to remove any dust or debris that might have been collected while stored. First time use of a brand new filter sock may cause increased protein skimming. Please monitor your protein skimmer so overflowing of your collection cup does not happen. 20 In order to maximize the life of your pump, it is crucial to perform the proper periodic maintenance at designated intervals. We recommend cleaning your pump and impellers every 2-4 weeks. SR-60, SR-80 & SR-120 • Unplug pump from power strip • Unplug both return elbows out from the return hole on filter wall • Raise each return elbow upward and remove pump from filter chamber SR-60, SR-80 & SR-120 continued. • Remove bottom pump cover. • Disassemble the impeller holder coupling from pump motor • Lift out the impeller & shaft from pump motor 21 REPLACING/CLEANING PUMP & PUMP IMPELLER WARRANTY INFORMATION LIMITED 1 YEAR WARRANTY - SR-60, SR-80 & SR-120 Aquariums The SR-60, SR-80 & SR-120 has a 1 YEAR limited warranty. The SR-60, SR-80 & SR-120 is warranted to the original purchaser against defective material and workmanship for 1 YEAR from the date of original purchase. This warranty is valid only under the following conditions: additions, modifications, or changes made to the product by the purchaser and not by the manufacturer shall void this warranty. Damages brought on by abuse, misapplication, or mishandling also voids this warranty. This warranty is limited to the repair or replacement of the product at the discretion of the manufacturer. This warranty does not cover personal injury, property loss, including livestock or damage (direct, incidental, or consequential) arising out of use of this product. This warranty gives you specific rights and you may also have other rights, which may vary from state to state. The Product Registration Card must be filled out completely and returned within (14) days from the date of purchase. Failure to do so will void this warranty. A proof of purchase from an authorized dealer must be provided when making a warranty claim. For Warranty Claims please contact our Customer Care Department. A RMA# must be issued before sending any product back to Innovative Marine. Products sent back to Innovative Marine without a RMA# will not be accepted. Service on products will not extend the original warranty period. Email: warranty@innovative-marine.com 22 PRODUCT INFORMATION MODEL # AQUARIUM SERIAL # DATE OF PURCHASE Please keep your receipt in a safe place to ensure you have this information. 23 INNOVATIVE-MARINE.COM A Division of 24


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply