Post questions, comments, reviews or page errors in the comment box below.
Your File is Ready … Download PDF
PDF Content Summary: Nokia 6110 Navigator User Guide 9200348 Issue 4
0434 DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-122 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at nokia.com/phones/declaration_of_conformity/
© 2008 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nokia Care, Navi, and Visual Radio are trademarks or registered trademarks of Nokia Corporation. Nokia tune and Visual Radio are sound marks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. This product includes software licensed from Symbian Software Ltd © 1998-2008. Symbian and Symbian OS are trademarks of Symbian Ltd. US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2008. Tegic Communications, Inc. All rights reserved. Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See < mpegla.com>. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE. The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for details, and availability of language options. Export controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. FCC/INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment. NO WARRANTY The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility for end-user support, functionality of the applications, or the information in the applications or these materials. Nokia does not provide any warranty for the third-party applications. BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS. 9200348/Issue 4
Contents SAFETY.............................................. 6 Support ............................................. 8 Help application................................................ 8 Issues with your device................................... 8 1. Get started.................................... 9 Insert a SIM or USIM card and battery ...... 9 microSD card................................................... 11 Charge the battery ........................................ 12 Switch the device on or off ........................ 12 Set time and date.......................................... 12 Normal operating position.......................... 12 Configuration settings ................................. 13 2. Your phone ................................. 14 Keys and parts ................................................ 14 Standby mode................................................. 15 Indicators ......................................................... 15 Menu ................................................................. 17 Welcome application ................................... 17 Volume control............................................... 17 Keypad lock (keyguard)................................ 18 Access codes ................................................... 18 My own key..................................................... 19 Attach a wrist strap...................................... 20 Connect a compatible headset .................. 20 Connect a USB data cable .......................... 20 3. Call functions ............................. 21 Make a call ...................................................... 21 Answer or reject a call ................................. 23 Make a video call........................................... 24 Video sharing .................................................. 25 Log ..................................................................... 27 4. Navigator.................................... 28 Navigator application................................... 29 Navigate to locations ................................... 30 Browse the map ............................................. 32 Plan trips.......................................................... 32 Extras ................................................................ 33 Transfer maps from PC................................. 34 5. Write text................................... 34 Traditional text input.................................... 34 Predictive text input...................................... 35 Copy and delete text..................................... 35 6. Messaging .................................. 36 Write and send messages ............................ 36 Inbox—receive messages.............................. 38 My folders ........................................................ 39 Mailbox ............................................................. 39 Outbox............................................................... 40 Cell broadcast ................................................. 41 Service command editor .............................. 41 Messaging settings........................................ 41 Message reader............................................... 45 7. Contacts ..................................... 45 Manage contacts............................................ 45 Manage contact groups ............................... 46 Add a ringing tone......................................... 46 Assign speed dialing keys ............................ 46 8. Gallery ........................................ 47 Edit images ...................................................... 47 Edit video clips................................................ 48 Download files ................................................ 49 9. Media.......................................... 50 Camera.............................................................. 50 Music player .................................................... 51 RealPlayer......................................................... 53 Radio.................................................................. 54 10.Web........................................... 57 Set up the phone for the browser service 57 Make a connection ........................................ 57 View bookmarks.............................................. 57 Connection security....................................... 58 Browse web pages ......................................... 58 End a connection ........................................... 60 Empty the cache............................................. 60 Browser settings............................................. 60
11.Download!................................. 62 12.Organizer................................... 62 Clock.................................................................. 62 Calendar ........................................................... 63 Notes................................................................. 64 Converter.......................................................... 64 13.Applications .............................. 65 GPS data........................................................... 65 Landmarks........................................................ 66 Adobe Reader.................................................. 66 Quickoffice ...................................................... 67 14.Settings ..................................... 69 Profiles.............................................................. 69 Themes.............................................................. 70 3-D tones ......................................................... 71 Voice commands............................................ 71 Phone settings................................................ 71 Speed dial ........................................................ 81 Speech............................................................... 81 Settings wizard............................................... 81 Call mailbox .................................................... 82 Instant messaging ......................................... 82 15.Connectivity.............................. 85 PC Suite............................................................ 85 Bluetooth connection ................................... 85 USB data cable................................................ 87 Remote synchronization .............................. 87 Connection manager..................................... 88 Push to talk...................................................... 89 Data transfer ................................................... 93 16.Data manager........................... 93 Application manager..................................... 93 File manager.................................................... 95 Device manager.............................................. 96 Memory card ................................................... 97 Activation keys................................................ 98 17.Battery and charger information.................................... 99 Charging and discharging............................ 99 Nokia battery authentication guidelines. 100 18.Enhancements ........................ 101 Care and maintenance................. 102 Additional safety information.... 103 Index............................................. 107
5 SAFETY Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. SWITCH OFF IN RESTRICTED AREAS Follow any restrictions. Switch the device off in aircraft, near medical equipment, fuel, chemicals, or blasting areas. QUALIFIED SERVICE Only qualified personnel may install or repair this product. ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. WATER-RESISTANCE Your device is not water-resistant. Keep it dry. ■ About your device The wireless device described in this guide is approved for use on the GSM 850, 900, 1800, and 1900 and UMTS 2100 networks. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect local customs, privacy and legitimate rights of others, including copyrights. Copyright protection may prevent some images, music, and other content from being copied, modified, or transferred. Your device supports several methods of connectivity. Like computers, your device may be exposed to viruses and other harmful content. Exercise caution with messages, connectivity requests, browsing, and downloads. Only install and use services and other software from trustworthy sources that offer adequate security and protection against harmful software, such as applications that are Symbian Signed or have passed the Java Verified™testing. 6 Consider installing antivirus and other security software on your device and any connected computer. Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content. Keep your device away from magnets or magnetic fields as they may cause some applications to activate unexpectedly. Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger. The office applications support common features of Microsoft Word, PowerPoint, and Excel (Microsoft Office 2000, XP, and 2003). Not all file formats can be viewed or modified. Remember to make back-up copies or keep a written record of all important information stored in your device. When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. ■ Network services To use the phone you must have service from a wireless service provider. Many of the features require special network features. These features are not available on all networks; other networks may require that you make specific arrangements with your service provider before you can use the network services. Your service provider can give you instructions and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language dependent characters and services. Your service provider may have requested that certain features be disabled or not activated in your device. If so, these features will not appear on your device menu. Your device may also have a special configuration such as changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as web browsing, e-mail, push to talk, instant messaging, and multimedia messaging, require network support for these technologies. ■ Battery removing Always switch the device off and disconnect the charger before removing the battery. 7 Support ■ Help application Your device has context-sensitive help. You can access the help from an application or from the main menu. To access help when an application is open, select Options > Help. To switch between help and the application that is open in the background, select and hold Menu. Select Options and from the following options: Topic list — to view a list of available topics in the appropriate category Help category list — to view a list of help categories Search by keyword — to search for help topics using keywords To open help from the main menu, select Menu > Applications > Help. In the list of help categories, select the desired application to view a list of help topics. To switch between the help category list, indicated with , and a keywords list, indicated with , scroll left or right. To display the related help text, select it. ■ Issues with your device If you have operational issues with your device, try the following before taking it to a service point: Reset the device Switch the device off, remove the battery, reinsert it, and switch the device on. Restore original factory settings Select Menu > Settings > Phone sett. > General > Factory settings. Your documents and files are not deleted. Visit the Nokia support website Check nokia.com/support or your local Nokia website for the latest guides, additional information, downloads, and services related to your Nokia product. On the website, you can get information on the use of Nokia products and services. If you need to contact Nokia Care services, check the list of local Nokia Care contact centres at nokia.com/customerservice. 8 For maintenance services, check your nearest Nokia Care point at nokia.com/repair. Update your device software Nokia may produce software updates that may offer new features, enhanced functions, or improved performance. You may be able to request these updates through the Nokia Software Updater PC application. To update the device software, you need the Nokia Software Updater application and a compatible PC with Microsoft Windows 2000 or XP operating system, broadband internet access, and a compatible data cable to connect your device to the PC. To get more information and to download the Nokia Software Updater application, visit nokia.com/softwareupdate or your local Nokia website. If software updates over the air are supported by your network, you may also be able to request updates through the device. See "Update software," p. 96. Downloading software updates may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges. Make sure that the device battery has enough power, or connect the charger before starting the update. 1. Get started ■ Insert a SIM or USIM card and battery Always switch the device off and disconnect the charger before removing the battery. This device uses BP-5M batteries. With the back of the device facing you, press the back cover release button (1), and lift the back cover to remove it (2). 9 To remove the battery, lift it as shown (3). To release the SIM card holder, gently pull the locking clip of the card holder, and open it (4). Insert the SIM or USIM card to the SIM card holder (5). Make sure that the SIM or USIM card is properly inserted and that the gold-colored contact area on the card is facing downwards. Close the SIM card holder, and press it until it snaps into position (6). Replace the battery (7). Press the back cover into place (8). 10 ■ microSD card Use only compatible microSD cards approved by Nokia for use with this device. Nokia uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card. Keep microSD cards out of the reach of small children. You can extend the available memory with a microSD memory card. You can insert or remove a microSD card without switching the device off. Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. Insert a memory card Note that a memory card, including a map, may already be inserted in the device. 1. With the back of the device facing upward, open the memory card slot door. 2. Place the memory card in the slot with the gold-colored contact area facing down. Push the card gently to lock it into place. 3. Close the memory card slot door. Remove a memory card 1. Open the memory card slot door. 2. Push the card gently to release it. Wait until Remove memory card and press 'OK' is displayed. Pull the card out. 3. Close the memory card slot door. 11 ■ Charge the battery Connect the charger to a wall socket. Connect the charger to the device. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. The charging time depends on the charger and the battery used. Charging a BP-5M battery with the AC-4 charger takes approximately 80 minutes. ■ Switch the device on or off Press and hold the end key. If the device asks for a PIN code, open the slide, enter the PIN code, and select OK. If the device asks for the lock code, enter the lock code, and select OK. The factory setting for the lock code is 12345. ■ Set time and date To set the correct time zone, time, and date, select the country you are in, and enter the local time and date. ■ Normal operating position Use the device only in its normal operating position. During extended operation, such as an active video call or high speed data connection, the device may feel warm. In most cases, this condition is normal. If you suspect the device is not working properly, take it to the nearest authorized service facility. 12 Cellular antenna (1) Bluetooth antenna (2) GPS antenna (3) Your device may have internal and external antennas. As with any radio transmitting device, avoid touching the antenna area unnecessarily while the antenna is transmitting or receiving. Contact with such an antenna affects the communication quality and may cause the device to operate at a higher power level than otherwise needed and may reduce the battery life. ■ Configuration settings Before you can use multimedia messaging, instant messaging, push to talk, e-mail, synchronization, streaming, and the browser, you must have the proper configuration settings on your device. Your device may automatically configure browser, multimedia messaging, access point, and streaming settings based on the SIM card used. You may also receive the settings directly as a configuration message, which you save to your device. For more information on availability, contact your service provider or nearest authorized Nokia dealer. When you receive a configuration message, and the settings are not automatically saved and activated, 1 new message is displayed. Select Show to open the message. To save the settings, select Options > Save. You may need to enter a PIN code provided by the service provider. 13 2. Your phone ■ Keys and parts Light sensor (1) Earpiece (2) Secondary camera lens (3) Display (4) Left and right selection keys (5) End key and power key (6), hereafter referred to as end key Call key (7) Menu key (8) Clear key (9) Navigator key (10) Navi™ scroll key (11), hereafter referred to as scroll key Number keys (12) USB mini-B connector (13) My own key (14) microSD card slot (15) Microphone (16) Back cover release button (17) Loudspeakers (18) Camera slide cover (19) Main camera lens (20) Camera flash (21) Nokia AV connector (2.5 mm) (22) Charger connector (23) Volume keys (24) Camera key (25) 14 Warning: This device may contain nickel. ■ Standby mode When you have switched on the device, and it is registered to a network, the device is in the standby mode and ready for use. To change the profile, press the end key, and select a profile. To open the list of last dialed numbers, press the call key. To start a connection to the web, press and hold 0. Active standby When active standby is enabled, you can use the display for fast access to frequently used applications. To select whether the active standby is shown, select Menu > Settings > Phone sett. > General > Personalisation > Standby mode > Active standby > On or Off. To access active standby applications, scroll up or down, then scroll to the application, and select it. In active standby the default applications are shown across the top of the active standby area, and calendar, to-do, and player events are listed below. To select an application or event, scroll to it, and select it. ■ Indicators The device is connected to a UMTS network. The HSDPA (network service) in UMTS network is activated. The device is connected to a GSM network. The device is in offline mode and not connected to a cellular network. The GPS receiver is active. You have received one or several messages to the Inbox folder in Messaging. You have received new e-mail in your remote mailbox. There are messages waiting to be sent in Outbox. See "Outbox," p. 40. You have missed calls. See "Recent calls," p. 27. 15 Shown if Ringing type is set to Silent and Message alert tone and E-mail alert tone are set to Off. See "Profiles," p. 69. The device keypad is locked. See "Keypad lock (keyguard)," p. 18. The loudspeaker is activated. An alarm is active. The second phone line is being used. See Line in use in "Call," p. 77. / All calls to the phone are diverted to your call mailbox or to another number. If you have two phone lines, the divert indicator is for the first line and for the second. A headset is connected to the device. A loopset is connected to the device. The connection to a Bluetooth headset has been lost. / A data call is active. A GPRS packet data connection is active. indicates the connection is on hold and that a connection is available. A packet data connection is active in a part of the network that supports EGPRS. indicates the connection is on hold and that a connection is available. The icons indicate that EGPRS is available in the network, but your device is not necessarily using EGPRS in the data transfer. A UMTS packet data connection is active. indicates the connection is on hold and that a connection is available. Bluetooth is switched on. Data is being transmitted using Bluetooth. See "Bluetooth connection," p. 85. A USB connection is active. Other indicators may also be shown. For push-to-talk indicators, see "Push to talk," p. 89. 16 ■ Menu In the menu you can access the functions in your device. To access the main menu, select Menu. To open an application or a folder, scroll to it by pressing the edges of the scroll key, and press the scroll key. To change the menu view, select Menu > Options > Change Menu view and a view type. If you change the order of the functions in the menu, the order may differ from the default order described in this user guide. To close an application or a folder, select Back and Exit as many times as needed to return to the main menu, or select Options > Exit. To display and switch between open applications, select and hold Menu. The application switching window opens, showing a list of open applications. Scroll to an application, and select it. To mark or unmark an item in applications, press #. To mark or unmark several consecutive items, press and hold #, and scroll up or down. Leaving applications running in the background increases the demand on battery power and reduces the battery life. ■ Welcome application Welcome application starts when you switch on your device for the first time. With the Welcome application, you can access the following applications: Tutorial — Learn about the features of your device and how to use them. Sett. wizard — Configure connection settings. Transfer — Copy or synchronize data from other compatible devices. To open Welcome later, select Menu > Applications > Welcome. ■ Volume control To adjust the earpiece or loudspeaker volume during a call or when listening to an audio file, press the volume keys. To activate the loudspeaker during a call, select Loudspeaker. To deactivate the loudspeaker during a call, select Handset. 17 Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. ■ Keypad lock (keyguard) To lock the keypad when the slide is closed, select Menu > Settings > Phone sett. > General > Slide handling > Keyguard activation > On when closing slide. See "Slide handling," p. 73. When the keypad is locked and the main display light is off, to activate the main display light, open the slide. Opening the slide also unlocks the keypad. To unlock the keypad when the slide is closed, select Unlock and OK within 1.5 seconds. Also opening the main camera lens cover unlocks the keypad. When the device or keypad is locked, calls may be possible to the official emergency number programmed into your device. ■ Access codes Lock code The lock code (5 digits) helps to protect your device against unauthorized use. The preset code is 12345. Change the code, and keep the new code secret and in a safe place separate from your device. To change the code and to set the device to request the code, see "Security," p. 74. If you enter an incorrect lock code five times in succession, the device ignores further entries of the code. Wait for 5 minutes, and enter the code again. When the device or keypad is locked, calls may be possible to the official emergency number programmed into your device. PIN codes The personal identification number (PIN) code and the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See "Security," p. 74. The PIN code is usually supplied with the SIM card. The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for some functions. 18 The module PIN is required to access the information in the security module. The module PIN is supplied with the SIM card if the SIM card has a security module in it. The signing PIN is required for the digital signature. The signing PIN is supplied with the SIM card if the SIM card has a security module in it. PUK codes The personal unblocking key (PUK) code and the universal personal unblocking key (UPUK) code (8 digits) are required to change a blocked PIN code and UPIN code, respectively. The PUK2 code is required to change a blocked PIN2 code. If the codes are not supplied with the SIM card, contact your local service provider for the codes. Barring password The barring password (4 digits) is required when using Call barring. See "Call barring," p. 78. You can obtain the password from your service provider. If you enter an incorrect barring password three times in succession, the password is blocked. Contact your service provider. ■ My own key To configure the my own key to open applications such as the message reader when pressing the key, select Menu > Settings > Phone sett. > General > My own key > My own key, scroll to the desired application, and select it. To give voice commands, press and hold the my own key. To activate push to talk, press the my own key. The push to talk connection must be started before it can be activated with the my own key. See "Push to talk," p. 89. When push to talk is started, the my own key functions as a push-to-talk key, overrides voice commands and the configured application, and activates push to talk. 19 ■ Attach a wrist strap ■ Connect a compatible headset Do not connect products that create an output signal as this may cause damage to the device. Do not connect any voltage source to the Nokia AV connector. When connecting any external device or any headset, other than those approved by Nokia for use with this device, to the Nokia AV connector, pay special attention to volume levels. ■ Connect a USB data cable To set the default mode and select whether the default mode is activated automatically, see "USB data cable," p. 87.
20 3. Call functions ■ Make a call 1. In the standby mode, enter the phone number, including the area code. Press the clear key to remove a number. For international calls, press * twice for the international prefix (the + character replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number. 2. To call the number, press the call key. To adjust the volume during the call, press the volume keys. 3. To end the call, or to cancel the call attempt, press the end key. To make a call from Contacts, select Menu > Contacts. Scroll to the desired name; or enter the first letters of the name, and scroll to the desired name. To call the number, press the call key. To call your call mailbox (network service), press and hold 1 in the standby mode. You must define the call mailbox number before you can call your call mailbox. See "Call mailbox," p. 82. To call a recently dialed number, press the call key in the standby mode. The list of the last 20 numbers you called or attempted to call is shown. Scroll to the number you want, and press the call key. To make a push to talk call, see "Push to talk," p. 89. Speed dialing You can assign a phone number to one of the speed dialing keys, 2 to 9. See "Assign speed dialing keys," p. 46. Call a speed dialing number in either of the following ways: • Press the speed dialing key, then the call key. • If Speed dialling is set to On, press and hold the speed dialing key until the call begins. To set Speed dialling to On, select Menu > Settings > Phone sett. > Phone > Call > Speed dialling > On. Voice dialing A voice tag is added automatically to all entries in Contacts. 21 Use long names, and avoid similar names for different numbers. Before using voice tags, note the following: • Voice tags are not language-dependent. They are dependent on the speaker's voice. • You must say the name exactly as you said it when you recorded it. • Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment. • Very short names are not accepted. Use long names, and avoid similar names for different numbers. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialling in all circumstances. 1. In the standby mode, press and hold the my own key. A short tone is played, and Speak now is displayed. If you are using a compatible headset with the headset key, press and hold the headset key. 2. Speak the voice command clearly. The device plays the voice command of the best match. After 1.5 seconds, the device dials the number; if the result is not the correct one, before dialing, scroll to another entry. Using voice commands to carry out a device function is similar to voice dialing. See "Voice commands," p. 71. Make a conference call (network service) 1. Make a call to the first participant. 2. To make a call to another participant, select Options > New call. The first call is automatically put on hold. 3. To join the first participant in the conference call when the new call is answered, select Options > Conference. • To add a new person to the call, repeat step 2, and select Options > Conference > Add to conference. The device supports conference calls between a maximum of six participants, including yourself. • To have a private conversation with one of the participants, select Options > Conference > Private. Select a participant and Private. The conference call is put on hold on your device. The other participants can still continue the conference call. To return to the conference call, select Options > Add to conference. 22 • To drop a participant, select Options > Conference > Drop participant, scroll to the participant, and select Drop. 4. To end the conference call, press the end key. ■ Answer or reject a call To answer a call, press the call key. To determine whether calls are answered automatically when opening the slide, select Menu > Settings > Phone sett. > General > Slide handling > Opening the slide > Answer incoming call or Call not answered. See "Slide handling," p. 73. To adjust the volume during the call, press the volume keys. To mute the ringing tone, select Silence. Tip: If a compatible headset is connected to the device, press the headset key to answer and end a call. To reject the call, press the end key. The caller hears a line busy tone. If you have activated the call divert option If busy to divert calls, rejecting the call diverts the call. To send a text message to inform the caller as to why you cannot answer the call, select Options > Send text message. You can edit the text before you send it. See Reject call with SMS and Message text in "Call," p. 77. Note that when a headset is connected, the slide call handling settings are not in use. Answer a video call When a video call arrives, is displayed. Press the call key to answer the video call. Allow video image to be sent to caller? is shown. If you select Yes, the image captured by the camera in your device is shown to the caller. If you select No, or do nothing, video sending is not activated, and a grey screen is shown in place of the video. Even if you have denied video sending during a video call, the call is still charged as a video call. Check the pricing with your service provider. To end the video call, press the end key. 23 Call waiting (network service) During a call, to answer the waiting call, press the call key. The first call is put on hold. To end the active call, press the end key. To activate the call waiting function, select Menu > Settings > Phone sett. > Phone > Call > Call waiting > Activate. To switch between the two calls, select Swap. Options during a call Many of the options that you can use during a call are network services. For availability, contact your service provider. Select Options during a call for some of the following options: Transfer — to connect a call on hold to an active call and disconnect yourself Replace — to end an active call and replace it by answering the waiting call Send DTMF — to send DTMF tone strings (for example, a password). Enter the DTMF string or search for it in Contacts. To enter a wait character (w) or a pause character (p), press * repeatedly. To send the tone, select OK. Tip: You can add DTMF tones to the phone number or DTMF fields in a contact card. ■ Make a video call When you make a video call, you can see a real-time, two-way video between you and the recipient of the call. The live video image or video image captured by the camera in your device is shown to the video call recipient. To be able to make a video call, you must be in the coverage of a UMTS network. You may need to use a USIM card to make video calls. For availability of and subscription to video call services, contact your service provider. A video call can only be made between two parties. The video call can be made to a compatible mobile phone or an ISDN client. Video calls cannot be made while there is another voice, video, or data call active. Icons: You are not receiving video (the recipient is not sending video or the network is not transmitting it). You have denied video sending from your device. 24 1. Enter the phone number in the standby mode; or select Menu > Contacts, and scroll to the desired contact. 2. Select Options > Call > Video call. Starting a video call may take a while. Waiting for video image is shown. If the call is not successful (for example, video calls are not supported by the network, or the receiving device is not compatible), you are asked if you want to try a normal call or send a message instead. The video call is active when you see two video images, and hear the sound through the loudspeaker. The call recipient may deny video sending ( ), in which case you hear the sound and may see a still image or a grey background graphic. To increase or decrease the volume during a call, press the volume keys. To change between showing video or only hearing sound, select Enable or Disable > Sending video, Sending audio, or Sending aud. & video. To zoom in or out on your own image, select Zoom in or Zoom out. The zoom indicator is shown on the top of the display. To switch the places of the sent and received video images on the display, select Change image order. Even if you have denied video sending during a video call, the call will still be charged as a video call. Check the pricing with your network operator or service provider. To end the video call, press the end key. ■ Video sharing To send live video from your mobile device to another compatible mobile device during a voice call, select Video sharing. Video sharing requirements Because Video sharing requires a 3G universal mobile telecommunications system (UMTS) connection, your ability to use Video sharing depends on 3G network availability. Contact your service provider for questions about network availability and fees associated with this application. To use Video sharing you must do the following: • Ensure that your device is set up for person-to-person connections, also known as session initiation protocol (SIP). Ask your service provider for SIP settings 25 and save them in your phone. If you know a recipient’s SIP address, you can enter it on your contact card for that person, select Menu > Contacts, a contact, and Options > Edit > Options > Add detail > Share view. Enter the SIP address in the format sip:username@domainname (you can use an IP address instead of a domain name). • Ensure you have an active UMTS connection and are within UMTS network coverage. If you start the sharing session while you are within UMTS network coverage and a handover to GSM occurs, the sharing session is discontinued, but your voice call continues. • Ensure that both the sender and recipient are registered to the UMTS network. If you invite someone to a sharing session and that person’s device is turned off, or the person is not within UMTS network coverage, they do not know that you are sending an invitation. However, you receive an error message that the recipient cannot accept the invitation. Share video To receive a sharing session, the recipient must install Video sharing and configure the required settings on their mobile device. You and the recipient must both be registered to the service before you can start sharing. Live video 1. When a voice call is active, select Options > Share video > Live video. 2. The device sends the invitation to the SIP address you have added to the contact card of the recipient. If the recipient has several SIP addresses in the contact card, select the SIP address to which you want to send the invitation, and Select to send the invitation. If the SIP address of the recipient is not available, enter a SIP address. Select OK to send the invitation. 3. Sharing begins automatically when the recipient accepts the invitation. The loudspeaker is active. You can also use a headset to continue your voice call while you share live video. 4. Select Pause to pause the sharing session. Select Continue to resume sharing. 5. To end the sharing session, select Stop. To end the voice call, press the end key. 26 Accept an invitation When someone sends you a share invitation, an invitation message is displayed showing the sender’s name or SIP address. If your device is not set to Silent, it rings when you receive an invitation. If someone sends you a share invitation and you are not within UMTS network coverage, you will not know that you received an invitation. When you receive an invitation, select Accept to begin the sharing session, or Reject to decline the invitation. The sender receives a message that you rejected the invitation. You can also press the end key to decline the sharing session and disconnect the voice call. To end the sharing session, select Stop. ■ Log In the log, you can monitor phone calls, text messages, packet data connections, and fax and data calls registered by the device. Connections to your remote mailbox, multimedia messaging centre, or browser pages are shown as data calls or packet data connections in the general communications log. Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth. Note: Some timers, including the life timer, may be reset during service or software upgrades. Recent calls The device registers the phone numbers of missed, received, and dialed calls, and the approximate duration of your calls. The device registers missed and received calls only if the network supports these functions, and the device is switched on and within the network service area. To view recent calls (network service), select Menu > Log > Recent calls and a call type. To clear all recent call lists in the Recent calls view, select Options > Clear recent calls. To clear only one of the call registers, open the register you want to erase, and select Options > Clear list. 27 General log To view the general log, select Menu > Log, and scroll right. To filter the log, select Options > Filter and the filter type. To erase all the log contents permanently, select Options > Clear log > Yes. 4. Navigator Your device has an internal GPS receiver that receives low power radio signals from satellites, and measures the travel time of the signals. From the travel time, the GPS receiver can calculate its location to within a few meters. The coordinates are expressed in degrees and decimal degrees format using WGS-84 coordinate system. The GPS receiver is located in the upper right corner of the slide cover. When using the receiver, hold the device upright in your hand with an orientation toward the sky. Note that establishing a GPS connection may take several minutes. As availability of GPS related services depends on wireless environment and systems, the services may not fuction in all environments at all times. In case of sudden loss of GPS reception, press the Navigator key to restart the application. Your device also supports Assisted GPS (A-GPS) service which helps determining the location faster. It utilises packet data connection, and your network operator may charge you for this according to your network subscription. Contact your service provider for the correct internet access point and charges related to the service. Assisted GPS (A-GPS) is used to retrieve assistance data over a packet data connection, which assists in calculating the coordinates of your current location when your device is receiving signals from satellites. Your device is preconfigured to use the Nokia A-GPS service if no service provider specific A-GPS settings are available. The assistance data is retrieved from the Nokia A-GPS service server only when needed. When you start the GPS function for the first time, you need to define or select an access point to take A-GPS into use. After this, A-GPS is used automatically when 28 needed unless the A-GPS method is disabled. For example, the A-GPS service will be contacted automatically if the integrated GPS has been switched off for more than two hours. To enable or disable different positioning methods, such as the A-GPS, select Menu > Settings > Phone sett. > General > Positioning > Positioning methods, scroll to the positioning method, and select Options > Enable or Disable. The Global Positioning System (GPS) is operated by the government of the United States, which is solely responsible for its accuracy and maintenance. The accuracy of location data can be affected by adjustments to GPS satellites made by the United States government and is subject to change with the United States Department of Defense civil GPS policy and the Federal Radionavigation Plan. Accuracy can also be affected by poor satellite geometry. Availability and quality of GPS signals may be affected by your location, buildings, natural obstacles, and weather conditions. The GPS receiver should only be used outdoors to allow reception of GPS signals. Any GPS should not be used for precise location measurement, and you should never rely solely on location data from the GPS receiver and cellular radio networks for positioning or navigation. Almost all digital cartography is inaccurate and incomplete to some extent. Never rely solely on the cartography provided for use in this device. If your device cannot find the satellite signal, consider the following: • If you are indoors, go outdoors to receive a better signal. • If you are outdoors, move to a more open space. • Check that your hand does not cover the GPS antenna of your device. • If the weather conditions are bad, in such a case the signal strength may also be affected. • Establishing a GPS connection may take several minutes. ■ Navigator application To start the Navigator application, press the Navigator key, or select Menu > Navigator. With the Navigator application, you can navigate, search places and routes, and plan trips. You receive voice guidance and visual travel instructions with the map turn-by-turn during your trip. When you launch the Navigator application, it zooms to the last known position and displays Getting position until the GPS receiver is able to calculate your position. 29 Navigator key You can use the Navigator key as a shortcut to different functions depending on the state of the Navigator application when you press the key. • If the Navigator application is not running, the Navigator key starts the application. • If the Navigator application is on the display but not showing the current position, the Navigator key moves the map to current position. • If the Navigator application is in the foreground showing the current position, the Navigator key opens the navigation function. • If the Navigator application is running in the background, the Navigator key brings the application to the display and goes to the GPS position on map. Keypad shortcuts in the Navigator application 1 — Open the Search view. 2 — Change view layout. 3 — Toggle between Day colors and Night colors. 4 — Show or hide the progress bar (only when navigating). 5 — Show or hide the GPS information view. 6 — Toggle between 2-D and 3-D perspective. 7 — Open the Free text search view. 8 — Zoom to the entire map. 9 — Toggle between sound on and off. 0 — Repeat the previous voice instruction (only when navigating). * or # — Zoom in or out on the map. The minimum is street level and the maximum is the globe. To move on the map, scroll left, right, up, or down. ■ Navigate to locations To define a travel mode in the Navigator application, select Options > Travel mode and As fast as possible, As short as possible or Pedestrian. To define more detailed travel conditions, select Options > Settings > Navigation. Travel mode can be changed at any time during navigation. 30 Navigate to a destination 1. In the Navigator application, select Options > Navigate and a navigation option. For example, to search an address, select Address; or to search a point of-interest (POI), select Nearby. You can also search for a destination in the map view by scrolling the cursor to the desired destination. . 2. To start navigating, select the destination from the list of results or from the map view, and select Navigate to. If navigation is in progress and you want to start a new one, select Yes when the confirmation query is asked. To continue a previous navigation and return to the map view, select No. 3. To stop the current navigation, press the clear key, or select Options > Stop navigation > Yes to the confirmation query. To continue the navigation, select No. To add a waypoint to a navigation in progress: 1. Search and select a waypoint from the list of results or from the map view. 2. Select Navigate via. If there is no intermediary waypoint defined for the trip, the navigation continues automatically. If an intermediary waypoint has been defined, a confirmation query is displayed. To continue the navigation with the new waypoint, select Yes, or to continue the navigation with the old waypoint, select No. Alarms To receive a visual or acoustic alarm when approaching a certain location, select Options > Settings > Alarm and the category to which the location belongs. For example, select Points-of-interest and mark the the desired subcategories. Set road blocks To avoid a certain part of the planned route when navigating, select Options > Define road block and the distance for which you want to set the road block. To define the part to be avoided in the Route description view, select Select from list. 31 ■ Browse the map When not navigating, you can use the Navigator application to browse the map, and search places and locations (for example, by address). A GPS signal is not required when browsing the map. View location information To view a searched item and information about it on the map view, select the item from the list and Show on map. Information can also be viewed by scrolling to the desired location on the map, selecting it and Show information. To call to a number of a selected location, select Call. To use the call function, select the item from the list of search results or in the map view. Send and save location information To send location data (such as a map as an image), route itinerary, or your current GPS position to a compatible device, select Options > Send and the data to be sent. The information channel depends on the data, for example, a map as an image can be sent as a multimedia or e-mail message or through a Bluetooth connection. To send your cursor position on the map to a compatible device, for example as an SMS or MMS, select it and Send cursor position > Via text message or Via multimedia. To save data, such as current GPS or cursor position to your device, select Options > Save and the data to be saved. You can add a location, for example, a cursor position, in Contacts. Select Save cursor position > New contact. ■ Plan trips 1. In the Navigator application, select Options > Trips > Plan new route. Enter the route name, and select Save. 2. Select Departure > Set departure to search, and select the departure point of the trip. 3. Select Destination > Set destination to search, and select the destination point of the trip. 32 4. To add waypoints to your route, select Options > Add waypoint, and search and select the waypoint to be added. 5. To start the trip, select Options > Start navigation and the first visit of the trip. If navigation is in progress and you want to start a new navigation, a confirmation is asked. To abort the ongoing navigation and start the new trip, select Yes. To continue the previous navigation, select No. To change the order of the waypoints, select the waypoint to be moved, Options > Move, and the direction to which you want to move the waypoint. Settings To change the Navigator application settings, select Options > Settings and the feature you wish to modify. For example, to choose specific points-of-interest to be displayed on the map, select Map > Show points-of-interest and the desired categories. To configure the behaviour of voice instructions during a phone call, select Navigation > Call handling > Dim instructions to set the voice instructions to a lower level than the phone conversation, Call and instructions to have the voice instructions and telephone conversation on the same volume level, or Beep for instruction to replace the voice instructions with a beep. For detailed information about the settings, see the Navigator help. To access the help, select Settings > Options > Help. ■ Extras To complement your device, download maps from the internet to your PC and use the Nokia Map Manager application (an add-on application to PC Suite) to transfer the maps from your PC or a DVD to a memory card in your device, see "Transfer maps from PC", p. 34. You can also use the Navigator application to download smaller amounts of data (network service), such as travel guides and traffic and weather information to a memory card in your device. Before you can use the maps or other contents, you must purchase licenses, for example, with the Navigator application. In case of problems with purchased contents, try synchronising the licenses. Select Extras > Options > Synchronise license keys. Extra services are provided by a third-party service provider. Availability depends on the country, operator, and local legislation. 33 ■ Transfer maps from PC The requirements of the PC for map transfer are as follows: • Microsoft Windows XP operating system (or later) • Nokia PC Suite 6.82 or later • Nokia Map Manager application (an add-on to PC Suite) To transfer maps between a PC and a memory card, for example, when copying memory card contents to a new memory card, use Nokia Map Manager. Connect your device to a PC with a compatible USB cable, and select PC Suite as the connection mode. To change the default USB connection mode, select Menu > Settings > Connectivity > USB > USB mode. Nokia Map Manager is optimized for transferring map files. For information about transferring maps with Nokia Map Manager, see the Nokia Map Manager help. 5. Write text When you write text, appears on the top right of the display, indicating predictive text input, or appears, indicating traditional text input. To set the predictive text input on or off when writing text, press # repeatedly until the desired mode is active. , , or is displayed next to the text input indicator, indicating the character case. To change the character case, press #. indicates the number mode. To change between letter and number mode, press # repeatedly until the desired mode is active. ■ Traditional text input Press a number key, 1 to 9, repeatedly until the desired character appears. Not all characters available under a number key are printed on the key. The availability of characters depends on the selected writing language. See Writing language in "Language," p. 72. If the next letter you want is on the same key as the present one, wait until the cursor appears (or scroll forward to end the time-out period), and enter the letter. To insert a number, press and hold the number key. 34 The most common punctuation marks and special characters are available under the 1 key. For more characters, press and hold *. To erase a character, press the clear key. To erase more characters, press and hold the clear key. To insert a space, press 0. To move the cursor to the next line, press 0 three times. ■ Predictive text input To enter any letter with a single keypress, use predictive text input. To activate predictive text input, press # repeatedly until appears. This activates predictive text input for all editors in the device. 1. To write the desired word, press the keys 2–9. Press each key only once for one letter. The word changes after every keypress. For the most common punctuation marks, press 1. For more punctuation marks and special characters, press and hold *. To erase a character, press the clear key. To erase more characters, press and hold the clear key. 2. When you have finished the word and it is correct, to confirm it, scroll forward or insert a space. If the word is not correct, to view the matching words the dictionary has found one by one, press * repeatedly. If the ? character is shown after the word, the word you intended to write is not in the dictionary. To add a word to the dictionary, select Spell. Enter the word (up to 32 letters) using traditional text input, and select OK. The word is added to the dictionary. When the dictionary becomes full, a new word replaces the oldest added word. Write compound words Write the first half of a compound word, and scroll forward to confirm it. Write the last part of the compound word, and to complete the compound word, press 0 to add a space. ■ Copy and delete text 1. To select letters and words, press and hold #, and at the same time scroll left or right. As the selection moves, text is highlighted. To select lines of text, press and hold #, and at the same time scroll up or down. 35 2. To copy the text to the clipboard, press and hold #, and at the same time select Copy. If you want to delete the selected text, press the clear key. 3. To insert the text, scroll to the insertion point, press and hold #, and at the same time select Paste. 6. Messaging To open the Messaging menu, select Menu > Messaging. You can see the New message function and a list of default folders: Inbox — contains received messages except e-mail and cell broadcast messages. E-mail messages are saved in the Mailbox folder. To read cell broadcast messages, select Options > Cell broadcast. My folders — for organizing your messages into folders Mailbox — for connecting to your remote mailbox to retrieve your new e-mail messages or viewing your previously retrieved e-mail messages offline. After you define settings for a new mailbox, the name given to that mailbox is displayed instead of Mailbox. Drafts — saves draft messages that have not been sent Sent — saves the messages that are sent, excluding messages sent using Bluetooth. See Save sent messages in "Other settings," p. 44. Outbox — temporarily saves the messages waiting to be sent Reports (network service) — saves the delivery reports of the text messages, special message types such as business cards, and multimedia messages you have sent. Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible. ■ Write and send messages The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS. Your device supports text messages beyond the limit for a single message. Longer messages are sent as two or more messages. Your service provider may charge accordingly. Characters with accents or other marks, and characters from some language options, take up more space, and limit the number of characters that can be sent in a single message. 36 Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. Before you can send and receive an SMS message, a multimedia message, or an e-mail, or connect to your remote mailbox, you must have the correct connection settings in place. See "Messaging settings," p. 41. 1. To create a message, select Menu > Messaging > New message and the message type. To create an audio message, see "Nokia Xpress audio messaging," p. 37. 2. Select the recipients or groups from Contacts, or enter the phone number or e mail address of the recipient in the To field. Separate recipients with a semicolon (;). 3. When creating an e-mail or multimedia message, scroll down to the subject field, and write the message subject. 4. Scroll down to move to the message field. 5. Write the message. When writing text messages, the message length indicator shows how many characters you can enter in the message. For example, 10 (2) means that you can still add 10 characters for the text to be sent as two separate text messages. To use a template for the text message, select Options > Insert > Template. To create a presentation based on a template to be sent as a multimedia message, select Options > Create presentation. To use a text template for the multimedia message, select Options > Insert object > Template. To add a media object to a multimedia message, select Options > Insert object > Image, Sound clip, or Video clip. To create and add a new media object, select Options > Insert new > Image, Sound clip, Video clip or Slide. When sound is added, is shown. To add a media object to an e-mail, select Options > Insert > Image, Sound clip, Video clip, Note or Template. 6. To send the message, select Options > Send. Nokia Xpress audio messaging Audio messages are multimedia messages that consist of a single sound clip. To create and send an audio message do the following: 1. Select Menu > Messaging > New message > Audio message. 37 2. In the To field, select the recipients from Contacts, or enter the phone number or e-mail address. Scroll down to the message field. 3. To record a new sound clip, select Options > Insert sound clip > New sound clip. The recording will start. To use a previously recorded sound clip, select Options > Insert sound clip > From Gallery, scroll to the sound clip, and select it. The sound clip has to be in .amr format. To play the sound clip , select Options > Play sound clip. 4. To send the message, select Options > Send. E-mail settings Before you can send, receive, retrieve, reply to, and forward e-mail to a separate e-mail account, you must configure an internet access point (IAP) and define your e-mail settings correctly, see "Connection," p. 79 and "E-mail settings," p. 43. Follow the instructions given by your e-mail service provider and internet service provider. ■ Inbox—receive messages Select Menu > Messaging > Inbox. When there are unread messages in the inbox, the icon changes to . To open a received message, select Menu > Messaging > Inbox and the desired message. View multimedia objects To view the list of media objects that are included in the multimedia message, open the message, and select Options > Objects. You can save the file in your device or send it using Bluetooth technology or as a multimedia message to another compatible device. Special message types Your device can receive many kinds of messages, such as operator logos, business cards, calendar entries, and ringing tones. To open a received message, select Menu > Messaging > Inbox and the desired message. You can save the special message content to your device. For example, 38 to save a received calendar entry to the calendar, select Options > Save to Calendar. The appearance of a message may vary depending on the receiving device. Service messages Service messages (network service) are notifications (for example, news headlines) that may contain a text message or the address of a browser service. For availability and subscription, contact your service provider. ■ My folders You can organize your messages into folders, create new folders, and rename and delete folders. Select Menu > Messaging > My folders. To create a folder, select Options > New folder, and enter a name for the folder. ■ Mailbox Select Menu > Messaging > Mailbox. Connect to mailbox? is displayed. Select Yes to connect to your mailbox (network service) or No to view previously retrieved e-mail messages offline. To connect to the mailbox afterwards, select Options > Connect. When you create a new mailbox, the name you give to the mailbox replaces Mailbox. You can have up to six mailboxes. When you are online, to end the data connection to the remote mailbox, select Options > Disconnect. Retrieve e-mail messages from the mailbox 1. Select Menu > Messaging > Mailbox > Options > Connect. 2. Select Options > Retrieve e-mail and from the following options: New — to retrieve all new e-mail messages to your device Selected — to retrieve only the e-mail messages that have been marked All — to retrieve all messages from the mailbox 3. After you have retrieved the e-mail messages, you can continue viewing them online. Select Options > Disconnect to close the connection and to view the e-mail messages offline. 39 4. To open an e-mail message, select it. If the e-mail message has not been retrieved and you are offline and select Open, you are asked if you want to retrieve this message from the mailbox. To view e-mail attachments, indicated with , select Options > Attachments. You can retrieve, open, or save attachments in supported formats. Delete e-mail messages To delete an e-mail from the device while still retaining it in the remote mailbox, select Options > Delete > Phone only. The e-mail header stays in your device. To remove the header as well, delete the e-mail message from your remote mailbox first, then connect your device to the remote mailbox to update the status. To delete an e-mail from the device and the remote mailbox, select Options > Delete > Phone and server. To cancel deletion of an e-mail from both the device and server, scroll to an e-mail that has been marked to be deleted during the next connection, and select Options > Restore. ■ Outbox The outbox folder is a temporary storage place for messages that are waiting to be sent. To access the outbox folder, select Menu > Messaging > Outbox. Message statuses are as follows: Sending — The device is sending the message. Waiting or Queued — The device is waiting to send messages or e-mail. Resend at ... — Sending failed. The device tries to send the message again after a time-out period. To retry sending the message immediately, select Options > Send. Deferred — To set documents to be on hold while they are in the outbox folder, scroll to a message that is being sent, and select Options > Defer sending. Failed — The maximum number of sending attempts has been reached. 40 ■ Cell broadcast You may be able to receive messages on various topics, such as weather or traffic conditions from your service provider (network service). To turn on the service, see Cell broadcast in "Cell broadcast settings," p. 44. Select Menu > Messaging > Options > Cell broadcast. A packet data connection may prevent cell broadcast reception. ■ Service command editor To enter and send service commands (also known as USSD commands) such as activation commands for network services to your service provider, select Menu > Messaging > Options > Service command. To send the command, select Options > Send. ■ Messaging settings Text message settings Select Menu > Messaging > Options > Settings > Text message and from the following options: Message centres — lists all the defined message centres Message centre in use — defines which message centre is used for delivering text messages and special message types such as business cards Character encoding > Full support — to select all characters in the message to be sent as viewed. If you select Reduced support, characters with accents and other marks may be converted to other characters. Receive report (network service) — When set to Yes, the status of the sent message (Pending, Failed, Delivered) is shown in Reports. Message validity — If the recipient of a message cannot be reached within the validity period, the message is removed from the message service centre. Note that the network must support this feature. Message sent as — to define how the message is sent. The default is Text. Preferred connection — You can send text messages using the normal GSM network or packet data if supported by your network. 41 Reply via same centre (network service) — If you select Yes, and the recipient replies to your message, the return message is sent using the same message service centre number. All networks do not provide this option. Multimedia messaging settings Select Menu > Messaging > Options > Settings > Multimedia message and from the following options: Image size — Define the size of the image in a multimedia message. If you select Original, the image is not scaled. MMS creation mode — If you select Guided, the device informs you if you try to send a message that may not be supported by the recipient. To set the device to prevent you from sending messages that are not supported, select Restricted. If you select Free, message creation is not restricted, but the recipient may not be able to view your message. Access point in use — Select which access point is used as the preferred connection for multimedia messaging. Multimedia retrieval — To receive multimedia messages only when you are in your home network, select Auto in home netw.. To always receive multimedia messages, select Always automatic. To retrieve messages manually, select Manual. To not receive any multimedia messages or advertisements, select Off. Allow anon. msgs. — To reject messages coming from an anonymous sender, select No. Receive adverts — Define whether you want to allow reception of multimedia message advertisements. Receive report — If you want the status of the sent message (Pending, Failed, or Delivered) to be shown in Reports, select Yes. Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible. Deny report sending > Yes — to deny sending delivery reports Message validity (network service) — If the recipient of a message cannot be reached within the validity period, the message is removed from the multimedia message centre. 42 E-mail settings Mailbox settings Select Menu > Messaging > Options > Settings > E-mail > Mailboxes and a mailbox. If no mailbox settings have been defined before, you are asked if you want to define the settings. Connection settings > Incoming e-mail and Outgoing e-mail — To define the correct settings, contact your e-mail service provider. User settings Select User settings and from the following settings: My name — Enter the name to be displayed in outgoing e-mail. Send message (network service) — To set when your e-mail messages are sent, select Immediately or During next conn.. Send copy to self — Select Yes to send a copy of the e-mail to the address defined in My e-mail address. Include signature — Select Yes to attach a signature to your e-mail messages and to create or edit a signature text. New e-mail alerts — To not receive alerts about new e-mail, select Off. Retrieval settings Select Retrieval settings and from the following settings: E-mail to retrieve — To only retrieve headers, select Headers only. To limit how much data is retrieved, select Size limit, and enter the maximum amount of data per message in kilobytes. To retrieve messages and attachments, select Msgs. & attachs.. Size limit and Msgs. & attachs. are only available with POP3 mailboxes. Retrieval amount — To limit the number of messages to retrieve from the inbox of the remote mailbox, select From Inbox > No. of e-mails and enter the maximum number of messages to retrieve. You can also limit the number of messages to retrieve from other subscribed folders in From folders (only IMAP4 mailboxes). IMAP4 folder path (only IMAP4 mailboxes) — Define the folder path for IMAP4 mailboxes. Folder subscriptions (only IMAP4 mailboxes) — Select the mailbox folders you want to subscribe to. To subscribe to or unsubscribe from a folder, scroll to it, and select Options > Subscribe or Cancel subscription. 43 Automatic retrieval Select Automatic retrieval and from the following settings: E-mail notifications — To automatically retrieve the headers to your device when you receive a notification of new e-mail in your remote mailbox, select Auto update or Only in home netw.. E-mail retrieval — To have e-mail headers automatically retrieved at set intervals, select Enabled, or if you only want headers to be retrieved in your home network, select Only in home netw.. Headers can be automatically retrieved for two mailboxes at most. You can set on which days, at what times, and how frequently the headers are retrieved in Retrieval days, Retrieval hours, and Retrieval interval. E-mail notifications and E-mail retrieval cannot be active at the same time. Service message settings Select Menu > Messaging > Options > Settings > Service message and from the following settings: Service messages — Allow or deny the reception of service messages. Download messages — Download messages automatically or manually. Cell broadcast settings Check with your service provider whether cell broadcast (network service) is available and what the available topics and related topic numbers are. Select Menu > Messaging > Options > Settings > Cell broadcast and from the following settings: Reception — Select On or Off. Language — Select in which languages cell broadcast messages are received. Topic detection — To automatically save previously unknown topic numbers in received cell broadcast messages, select On. Other settings Select Menu > Messaging > Options > Settings > Other and from the following settings: Save sent messages — Select to save a copy of every sent text message, multimedia message, or e-mail to the Sent folder. 44 Number of saved msgs. — Define how many sent messages are saved to the sent items folder at a time. When the limit is reached, the oldest message is deleted. Memory in use — Select whether to save messages to the device memory or memory card. ■ Message reader With Message reader, you can listen to received text, multimedia, and e-mail messages. To listen to a message in Inbox or Mailbox, scroll to the message or mark the messages, and select Options > Listen. To skip to the next message, scroll down. Tip: When 1 new message or New e-mail is displayed in the standby mode, to listen to the received messages, press and hold the left selection key until Message reader starts. 7. Contacts ■ Manage contacts Select Menu > Contacts. To add a new contact, select Options > New contact. Fill in the fields you want, and select Done. To edit a contact, scroll to it, and select Options > Edit. To assign default numbers and addresses to a contact, select it, and select Options > Defaults. Scroll to the desired default option, and select Assign. To copy names and numbers from a SIM card to your device, select Options > SIM contacts > SIM directory. Scroll to the names you want to copy, mark the desired names, and select Options > Copy to Contacts. To copy a phone, fax, or pager number from contacts to your SIM card, scroll to the contact you want to copy, and select Options > Copy > To SIM directory. To view the list of fixed dialing numbers, select Options > SIM contacts > Fixed dial contacts. This setting is only shown if supported by your SIM card. When fixed dialling is activated, calls may be possible to the official emergency number programmed into your device. 45 ■ Manage contact groups Create a contact group so that you can send text or e-mail messages to several recipients at the same time. 1. Scroll to the right, and select Options > New group. 2. Enter a name for the group. 3. Select the group and Options > Add members. 4. Mark the contacts you want to add to the group, and select OK. ■ Add a ringing tone You can set a ringing tone (and a video ringing tone) for each contact and group. 1. Select Menu > Contacts. 2. To add a ringing tone to a contact, select the contact, Options > Ringing tone, and the desired ringing tone. To add a ringing tone to a group, scroll right to the groups list, and scroll to a contact group. Select Options > Ringing tone and the ringing tone for the group. To remove the personal or group ringing tone, select Default tone as a ringing tone. ■ Assign speed dialing keys You can assign a phone number to the speed dialing keys, 2 to 9. The 1 key is reserved for the call mailbox. Speed dialing has to be activated before using speed dialing. See Speed dialling in "Call," p. 77. 1. Select Menu > Contacts and a contact. 2. Scroll to a number, and select Options > Assign speed dial. Scroll to the desired speed dialing key, and select Assign. When you return to the contact information view, next to the number indicates the assigned speed dial. To call the contact by speed dialing, in the standby mode, press the speed dialing key and the call key, or press and hold the speed dialing key. 46 8. Gallery Use Gallery to store and organize your images, video clips, music tracks, sound clips, track lists, streaming links, .ram files, and presentations. Select Menu > Gallery and a folder. To set an image as your wallpaper, select Images and the desired image. Select Options > Use image > Set as wallpaper. To assign the image to a contact, select Assign to contact. To set a video as a video ringing tone, select Video clips and the desired video. Select Options > Use video > Set as ringing tone. To assign the video for a contact, select Assign to contact. To copy files to device memory or to the memory card, scroll to the file or mark the files, and select Options > Organise > Copy to phone mem. or Copy to memory card. To create image folders and move images to them, select Images, scroll to an image, select Options > Organise > New folder, and enter a name for the folder. Mark the images you want to move to the folder, and select Options > Organise > Move to folder and the folder. ■ Edit images To edit images in Gallery, scroll to the image, and select Options > Edit. To crop an image, select Options > Apply effect > Crop. To crop the image size manually, select Manual or a predefined aspect ratio from the list. If you select Manual, a cross appears in the upper left corner of the image. Scroll to select the area to crop, and select Set. Another cross appears in the lower right corner. Again select the area to be cropped. To adjust the first selected area, select Back. The selected areas form a rectangle, which forms the cropped image. If you selected a predefined aspect ratio, select the upper left corner of the area to be cropped. To resize the highlighted area, use the scroll key. To freeze the selected area, press the scroll key. To move the area within the picture, scroll. To select the area to be cropped, press the scroll key. To reduce red eye in an image, select Options > Apply effect > Red eye reduction. Move the cross onto the eye, and press the scroll key. A loop appears on the display. To resize the loop to fit the size of the eye, scroll up, down, left, or right. To reduce the redness, press the scroll key. 47 Shortcuts in the image editor are as follows: • To view an image in the full screen, press *. To return to the normal view, press * again. • To rotate an image clockwise or counterclockwise, press 3 or 1. • To zoom in or out, press 5 or 0. • To move on a zoomed image, scroll up, down, left, or right. ■ Edit video clips To edit video clips in Gallery and create custom video clips, scroll to a video clip, and select Options > Video editor. In the video editor you can see two timelines: video clip timeline and sound clip timeline. The images, text, and transitions added to a video clip are shown on the video clip timeline. To switch between the timelines, scroll up or down. Modify video To modify the video, select from the following options: Edit video clip: Cut — trims the video clip in the cut video clip view. Add colour effect — inserts a color effect on the video clip. Use slow motion — slows the speed of the video clip. Mute sound or Unmute sound — mutes or unmutes the original video clip sound. Move — moves the video clip to the selected location. Remove — removes the video clip from the video. Duplicate — makes a copy of the selected video clip. Edit text (shown only if you added text) — to move, remove, or duplicate text; change the color and style of the text; define how long it stays on the screen; and add effects to the text. Edit image (shown only if you added an image) — to move, remove, or duplicate an image; define how long it stays on the screen; and set a background or a color effect to the image. Edit sound clip (shown only if you have added a sound clip) — to cut or move the sound clip, to adjust its length, or to remove or duplicate the clip. 48 Edit transition — There are three types of transitions: at the start of a video, at the end of a video, and transitions between video clips. You can select start transition when the first transition of the video is active. Insert — Select Video clip, Image, Text, Sound clip, or New sound clip. Movie — Preview the movie in the full screen or as a thumbnail, save or send the movie, or cut the movie to a proper size for sending it in a multimedia message. To take a snapshot of a video clip, in the cut video view, select Options > Take snapshot. In the thumbnail preview view, press the scroll key, and select Take snapshot. To save your video, select Options > Movie > Save. To define the Memory in use, select Options > Settings. To send the video, select Send > Via multimedia, Via e-mail, or Via Bluetooth. Contact your service provider for details of the maximum multimedia message size that you can send. If your video is too large to send in a multimedia message, appears. Transfer videos from PC To transfer videos use a compatible USB cable or Bluetooth connectivity. The requirements of the PC for video transfer are as follows: • Microsoft Windows XP operating system (or later) • Nokia PC Suite 6.82 or later • Nokia Video Manager application (an add-on application to PC Suite) If you connect the USB cable to transfer videos, use Nokia Video Manager in Nokia PC Suite, and select PC Suite as the connection mode. To change the default USB connection mode, select Menu > Settings > Connectivity > USB > USB mode. Nokia Video Manager in Nokia PC Suite is optimized for transcoding and transferring video files. For information about transferring video with Nokia Video Manager, see the Nokia Video Manager help. ■ Download files Select Menu > Gallery, the folder for the file type you want to download, and the download function (for example, Images > Downl. graphics). The browser opens. Choose a bookmark for the site to download from. 49 9. Media ■ Camera Your device has two cameras, a high resolution camera on the back cover (the main camera in landscape mode) and a lower resolution camera on the front (the secondary camera in portrait mode). You can use both cameras to take still pictures and record videos. To use the main camera, open the main camera slide cover. To activate the camera, press the camera key. To zoom in or out, use the volume keys or scroll up or down. To capture an image, press the camera key. The image is saved to Images in Gallery, and the image is displayed. To return to the viewfinder, select Back. To delete the photo, press the clear key. To capture images sequentially, select Options > Sequence mode > On. In the sequence mode, the camera captures six images in short intervals and displays the images in a grid. To use the panorama mode, select Options > Panorama mode. Press the capture key to capture a panorama image. The panorama preview is displayed. Turn slowly to right or left. You cannot change the direction. If the arrow on the display is red, you are turning too fast. To stop the panorama, press the capture key again. The panorama mode is available only in the main camera. To turn the flash on or off, select Options > Flash > On or Off. If you select Automatic, the flash is used automatically when necessary. The flash is available only in the main camera. Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture. In dim lighting, to use night mode, select Options > Night mode > On. 50 To use the self-timer, select Options > Self-timer and the time you want the camera to wait before capturing the image. Press the scroll key, and the timer starts. To adjust the white balance or color tone, select Options > Adjust > White balance or Colour tone. The adjustment is available only in the main camera. To record a video, select Options > Video mode, and press the scroll key to start recording. Camera settings Your device supports an image capture resolution of 1600 x 1200 pixels. To change camera settings, select Menu > Media > Camera > Options > Settings. Select Image and from the following settings: Image quality, Resolution (Camera 1), and Resolution (Camera 2) — The better the image quality and the higher the resolution, the more memory the image consumes. Show captured image — To not display the image after capturing, select No. Default image name — Change how the captured images are named. Memory in use — Select whether you want to save your images in the device memory or on the memory card. Select Video and from the following settings: Length — If set to Maximum, the length of the recorded video is only restricted by the available memory. If set to Short, the recording time is optimized for MMS sending. Resolution (Camera 1) and Resolution (Camera 2) — Select the video resolution. Default video name — Select how the video clips are named. Memory in use — Select whether you want to save your video clips in the device memory or on the memory card. ■ Music player To open the music player, select Menu > Media > Music player. 51 Music library Music library is a database of the available music tracks. To open the music library, in the music player main view, select Options > Music library. To update the music library and search for music tracks in the device memory and on the memory card, select Options > Update Music library. To play a specific album, select Albums, scroll to the album, and select Options > Play. To listen to specific tracks on the album, select Albums and an album, mark the tracks, and select Options > Play. Track lists To compile and save your own track list, select Track lists > Options > New track list. Select the memory in which to save the track list, and enter a name for the track list. Mark the desired tracks, and press the scroll key. To listen to a track list, select Track lists, scroll to the track list, and select Options > Play. You can add tracks to a saved track list from other views. For example, to add an album, select Albums, locate the album, scroll to it, and select Options > Add to track list > Saved track list. Select the track list to which to add the album. Listen to music Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. To start playing or pause playback, press the scroll key. To skip to the next or previous track, scroll down or up. To fast forward or rewind, press and hold the scroll key down or up. To see the currently playing track list, select Options > Open ’Now playing’. To return to the standby mode and leave the music player in the background, press the end key. To play the music tracks repeatedly, select Options > Loop. Select All to repeat all the currently playing tracks, One to repeat the currently playing track, or Off to not repeat tracks. To play music in random order, select Options > Random play > On. 52 Audio settings To adjust the tone of the sound and apply effects to the sound, select Options > Audio settings. Equaliser To enhance or diminish frequencies during music playback and modify how your music sounds, select Options > Audio settings > Equaliser. To use a preset, scroll to it, and select Options > Activate. Create a new preset 1. To create a new preset, select Options > New preset, and enter the preset name. 2. To move between frequency bands, scroll left or right. To enhance or diminish sound in the frequency band, scroll up or down. 3. Select Back. ■ RealPlayer With RealPlayer, you can play media files such as video clips saved in the device memory or memory card, or stream media files over the air by opening a streaming link. To open RealPlayer, select Menu > Media > RealPlayer. RealPlayer does not support all file formats or all the variations of file formats. Play media files To play a media file in RealPlayer, select Options > Open and from the following: Most recent clips — to play media files that you have recently played Saved clip — to play media files saved in the device or memory card To stream content over the air, do the following: • Select a streaming link saved in the gallery. A connection to the streaming server is established. • Open a streaming link while browsing the web. To stream live content, you must first configure your default access point. See "Access points," p. 79. Many service providers require you to use an internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point. Contact your service provider for more information. 53 In RealPlayer, you can only open an rtsp:// URL address. You cannot open an http:/ / URL address; however, RealPlayer recognizes an http link to a .ram file since a .ram file is a text file containing an rtsp link. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Shortcuts during play Scroll up to seek forward or down to seek back in the media file. Press the volume keys to increase or decrease the sound volume. ■ Radio You can use the Visual Radio application as a FM radio with automatic tuning and preset stations or with parallel visual information related to the radio program if you tune in to stations that offer Visual Radio service and your network operator supports the service. The Visual Radio service uses packet data (network service). Radio cannot be started when the device is in offline mode. The FM radio depends on an antenna other than the wireless device antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. You can make a call or answer an incoming call while listening to the radio. The radio is muted when there is an active call. To open Radio, select Menu > Media > Radio. To turn the radio off, select Exit. Tune and save a radio station To start the station search when the radio is on, select or . Searching stops when a station is found. To save the station, select Options > Save station. Select a location for the station. Enter the name of the station, and select OK. Radio functions To adjust the volume, press the volume keys. Select or to scroll to the next or previous saved station. The buttons are inactive if there are no saved stations. 54 When using a compatible headset, press the headset key to scroll to the next saved radio station. To save the current station, select Options > Save station, a preset position, and enter the station name. To set the station frequency manually, select Options > Manual tuning. To listen to the radio in the background and go to the standby mode, select Options > Play in background. Station list When the radio is on, select Options > Stations. The station list is used for managing the saved radio stations. Station setup Scroll to a station in the station list, select it and Edit to change the station parameters. View visual content To check availability and costs, and to subscribe to the service, contact your service provider. To view visual content of the current station, select . If the visual service ID was not saved in the station list, you are asked for the visual service ID. Enter the visual service ID, and select OK. If you do not have the visual service ID, select Retrieve to access the station directory (network service). To end the visual content feed but not the FM radio, select Close. To set light settings and the power saver time-out, select Options > Display settings. Visual Radio settings When the radio is on, select Options > Settings and the following: Start-up tone — to enable or disable the start-up tone Auto-start service — to enable or disable the automatic display of visual content Access point — to select the access point 55 Station directory With the station directory (network service) you can select Visual Radio enabled or traditional radio stations from a list, grouped in folders. To check availability and costs, and to subscribe to the service, contact your service provider. Access the station directory from the visual content view To retrieve the visual service ID and to start visual content for the currently tuned radio station, select and Retrieve. After the connection to the station directory is established, select the nearest location to your current position from a list of folders. The device compares the frequencies of the listed radio stations with the currently tuned in frequency. If a matching frequency is found, the visual service ID of the tuned radio station is displayed. Select OK to start viewing the visual content. If there is more than one radio station with matching frequencies, the radio stations and their visual service ID are displayed in a list. Select the desired radio station. The tuned radio station and the visual service ID are displayed. Select OK to start viewing the visual content. Access the station directory from options To access the station directory (network service) from the station list, select Options > Station directory. After the connection to the station directory, you are requested to select the nearest location to your current position from a list of locations. Radio stations that provide visual content are indicated with . Select the desired radio station and from the following options: Listen — to tune to the highlighted radio station. To confirm the frequency setting, select Yes. Start visual service — to open the visual content of the selected radio station (if available) Save — to save the details of the selected radio station to the station list Details — to view channel information 56 10. Web To browse web pages written in XHTML, WML, or HTML, select Menu > Web, or press and hold 0 in the standby mode. Check the availability of services, pricing, and tariffs with your service provider. Service providers also give you instructions on how to use their services. Important: Use only services that you trust and that offer adequate security and protection against harmful software. ■ Set up the phone for the browser service Your device may configure the WAP or internet access point automatically based on your SIM card. You can use Settings wizard to configure WAP or internet access point settings. See "Settings wizard," p. 81. You may receive service settings in a configuration message from the service provider. To define an access point manually, see "Access points," p. 79. ■ Make a connection To access web pages, do the following: • Select the home page ( ) of your service provider. • Select a bookmark from the bookmarks view. • In the bookmarks view, enter the address of the web page, and select Go to. ■ View bookmarks Bookmarks are indicated by the following icons: The starting page defined for the default access point. The automatic bookmarks folder contains bookmarks ( ) that are collected automatically when you browse pages. Any bookmark showing the title or internet address of the bookmark. and may be replaced with the icons of the website. 57 Add bookmarks manually 1. In the bookmarks view, select Options > Bookmark manager > Add bookmark. 2. Fill in the fields. 3. Select Options > Save. Send bookmarks Scroll to a bookmark or mark several bookmarks, select Options > Tools > Send and an option. ■ Connection security If the security indicator is displayed during a connection, the data transmission between the device and the internet gateway or server is encrypted. The security icon does not indicate that the data transmission between the gateway and the content server (or the place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server. To view details about the connection, encryption status, and information about server authentication, select Options > Tools > Page info. Security features may be required for some services, such as banking services. For such connections you need security certificates. For more information, contact your service provider. See also "Certificate management," p. 75. ■ Browse web pages Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred, or forwarded. Important: Only install and use applications and other software from trusted sources, such as applications that are Symbian Signed or have passed the Java VerifiedTM testing. Keys and commands for browsing To open a link, make selections or check boxes, and press the scroll key. To go to the previous page while browsing, select Back. If Back is not available, select Options > Navigation options > History to view a chronological list of the pages visited during a browsing session. To choose the desired page, scroll left or right, and select it. The history list is cleared each time a session is closed. 58 To save a bookmark while browsing, select Options > Save as bookmark. To retrieve the latest content from the server, select Options > Navigation options > Reload. To open the browser toolbar, scroll to an empty part of the page, and press the scroll key. Keypad shortcuts while browsing 1 — Open your bookmarks. 2 — Search for keywords in the current page. 3 — Return to the previous page. 5 — List all open windows. 8 — Show the page overview of the current page. Press 8 again to zoom in and view the desired section of the page. 9 — Enter a new web address. 0 — Go to the start page. * or # — Zoom the page in or out. Mini map Mini map helps you navigate web pages that contain large amount of information. When Mini map is on in browser settings and you scroll through a large web page, Mini map opens and displays an overview of the web page you are browsing. To move in Mini map, scroll. When you stop scrolling, Mini map disappears and the area outlined in Mini map is displayed. Page overview With Page overview, you can move more quickly to the desired part of a web page. Page overview may not be available on all pages. To show the page overview of the current page, press 8. To find the desired spot on the page, scroll up or down. Press 8 again to zoom in and view the desired section of the page. Web feeds and blogs Web feeds are .xml files on web pages that are widely used to share the latest entry headlines or full text, for example, recent news in the form of news feeds. 59 Blogs or weblogs are web diaries. Most of the web feeds use RSS and ATOM technologies. The browser automatically detects if a web page contains web feeds. To subscribe to a web feed, select Options > Subscribe and a feed, or click on the link. To view the web feeds you have subscribed to, in the bookmarks view, select Web feeds. To update a web feed, select it, and Options > Refresh. To define how the web feeds are updated, select Options > Settings > Web feeds. Saved pages You can save pages and view them later offline. To save a page while browsing, select Options > Tools > Save page. To open the Saved pages view, in the bookmarks view, select Saved pages. To open a page, select it. To start a connection to the browser service and retrieve the page again, select Options > Navigation options > Reload. The device stays online after you reload the page. ■ End a connection To end the connection and view the browser page offline, select Options > Tools > Disconnect. To quit browsing, select Options > Exit. ■ Empty the cache A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache. To empty the cache, select Menu > Web > Options > Clear privacy data > Clear cache. To clear all privacy data, including the cache, cookies, form data, passwords, and browsing history, select Menu > Web > Options > Clear privacy data > All. ■ Browser settings Select Options > Settings and from the following: General Access point — Select the default access point. Homepage — Define the address of the desired homepage. 60 Mini map — Set on or off. History list — Select whether a list of the pages you have visited during the current browsing session are displayed when you select Back. Security warnings — Hide or show security notifications. Java/Ecma Script — Enable or disable the use of scripts. Page Load content — Select what type of content is loaded automatically while browsing. If you select Text only, to load images during browsing, select Options > Tools > Load images. Screen size — Choose how to use the display area for viewing pages. Default encoding — When you select Automatic, the browser automatically tries to choose the correct character encoding. Block pop-ups — Allow or block automatic opening of different pop-ups while browsing. Automatic reload — Enable or disable automatic refresh of browser pages. Font size — Select the font size. Privacy Auto. bookmarks — Select On if you want the bookmarks to be automatically saved in the Auto. bookmarks folder when you visit a page. When you select Hide folder, the bookmarks are still automatically added to the folder. Form data saving — If you do not want the data you enter to different forms on a web page to be saved and used next time the page is entered, select Off. Cookies — Enable or disable the receiving and sending of cookies (a means for content providers to identify users and their preferences for frequently used content). Web feeds Automatic updates — Define whether you want the web feeds to be updated automatically or not, and how often you want to update them. Setting the application to retrieve web feeds automatically may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges. Acc. point for auto-update — Select the desired access point for updating (only available when Automatic updates is on). 61 11. Download! Download! (network service) is a mobile content shop available on your device. You may be able to download some content free of charge. With Download! you can discover, preview, buy, download, and upgrade content, services, and applications. The items are categorized under catalogs and folders provided by different service providers. The available content depends on your service provider. Select Menu > Download!. Download! uses your network services to access the most up-to-date content. For information on additional items available through Download!, contact your service provider or the supplier or manufacturer of the item. 12. Organizer ■ Clock Select Menu > Organiser > Clock. Clock settings To change the time or date, select Options > Settings. For more information about the settings, see "Date and time," p. 73. Set an alarm 1. To set a new alarm, scroll right to Alarm, and select Options > New alarm. 2. Enter the alarm time, select whether and when the alarm is repeated, and select Done. When an alarm is active, is shown. To cancel an alarm, scroll to the alarm, and select Options > Remove alarm. To deactivate a repeated alarm, select Options > Deactivate alarm. Turn off the alarm Select Stop to turn off the alarm. Select Snooze to stop the alarm for 5 minutes, after which it resumes. 62 World clock To open the world clock view, scroll right to World. To add cities to the list, select Options > Add city. To set your current city, scroll to a city, and select Options > Set as current city. The city is displayed in the clock main view, and the time in your device is changed according to the city selected. Check that the time is correct and matches your time zone. ■ Calendar Select Menu > Organiser > Calendar. In the calendar, you can keep track of your appointments, meetings, birthdays, anniversaries, and other events. You can also set a calendar alarm to remind you of upcoming events. Create calendar entries 1. Select Options > New entry and an entry type. Anniversary entries are repeated every year. 2. Fill in the fields. Repeat — Press the scroll key to change the entry to be repeated. A repeating entry is indicated by in the day view. Repeat until — Set an ending date for the repeated entry, for example, the last date of a weekly course you are taking. This option is shown only if you have selected to repeat the event. Synchronisation > Private — After synchronization the calendar entry can be seen only by you, and it is not shown to others even if they have online access to view the calendar. Public — The calendar entry is shown to others who have access to view your calendar online. None — The calendar entry is not copied when you synchronize your calendar. 3. To save the entry, select Done. Calendar views Press # in the month, week, or day views to automatically highlight today’s date. To create a meeting entry, press any number key (0–9) in any calendar view. To go to a certain date, select Options > Go to date. Write the date, and select OK. 63 To-do Select Options > To-do view. In the To-do view, you can keep a list of tasks that you need to do. Create a to-do note 1. To start to write a to-do note, press any number key (0–9). 2. Write the task in the Subject field. Set a due date and a priority for the task. 3. To save the to-do note, select Done. ■ Notes Select Menu > Organiser > Notes. To write a new note, start writing. To save the note, select Done. You can save plain text files (.txt format) you receive to Notes. ■ Converter Select Menu > Organiser > Converter. In the converter, you can convert measurement parameters from one unit to another, for example, length (yards to metres). The converter has limited accuracy and rounding errors may occur. Convert units To convert currency, you must first set the exchange rate. See "Set a base currency and exchange rates," p. 65. 1. Select Type, the type of measurement to convert, and OK. 2. Select the first unit field, the unit from which you want to convert, and OK. 3. Select the next unit field and the unit to which you want to convert. 4. In the first amount field, enter the value to be converted. The other amount field changes automatically to show the converted value. Press # to add a decimal and press * for the +, - (for temperature), and E (exponent) symbols. The conversion order changes if you write a value in the second amount field. The result is shown in the first amount field. 64 Set a base currency and exchange rates Before you can convert currency, you need to choose a base currency (usually your domestic currency) and add exchange rates. The rate of the base currency is always 1. The base currency determines the conversion rates of the other currencies. 1. Select Currency as the measurement type, then Options > Currency rates. 2. To change the base currency, scroll to the currency (usually your domestic currency), and select Options > Set as base currency. 3. Add exchange rates, scroll to the currency, and enter a new rate, that is, how many units of the currency equal one unit of the base currency you selected. 4. After you insert all the required exchange rates, you can convert currency. When you change base currency, you must enter new exchange rates because all previously set exchange rates are cleared. 13. Applications ■ GPS data To start the GPS data application, select Menu > Applications > GPS data. Navigation To use route guidance, select Navigation. Route guidance shows the straightest route and the shortest distance to the destination. Any obstacles, such as buildings and natural obstacles, are ignored. Differences in altitude are not taken into account when calculating the distance. Route guidance is active only when you move. To set your trip destination, select Options > Set destination and a landmark as the destination, or enter the latitude and longitude coordinates. Select Stop navigation to clear the set destination. To view the position information of your current location, select Position. Position To save your current location as a landmark, select Options > Save position. Trip distance 65 Select Trip distance > Options > Start to activate trip distance calculation and Stop to deactivate it. The calculated values remain on the display. Select Reset to set the trip distance, time, average and maximum speeds to zero and to start a new calculation. Select Restart to set also the odometer and total time to zero. The trip meter has limited accuracy, and rounding errors may occur. Accuracy can also be affected by availability and quality of GPS signals. Position requests You may receive a request from a network service to receive your position information. Service providers may offer information about local topics, such as weather or traffic conditions, based upon the location of your device. When you receive a position request, a message is displayed showing the service that is making the request. To allow your position information to be sent, select Accept; to deny the request, select Reject. ■ Landmarks With landmarks you can save the position information of specific locations to your device. You can use your saved landmarks in compatible applications, such as the Navigator application. To create a new landmark, select Menu > Applications > Landmarks > Options > New landmark. To make a positioning request for the coordinates of your current location, select Current position. To enter the position information manually, select Enter manually. To add a landmark to preset categories, select the landmark, and Options > Add to category. Select the categories to which you want to add the landmark. To send one or several landmarks to a compatible device, select Options > Send. Your received landmarks are placed in Inbox in Messaging. ■ Adobe Reader Use Adobe Reader to view portable document format (.pdf) documents. To open the application, select Menu > Applications > Adobe PDF. 66 Open a .pdf file To open a recently viewed document, select it. To open a document that is not listed in the main view, select Options > Browse for file the memory and folder wherein the file resides and the file. View a document To move around within a page, scroll. To move to the next page, scroll down at the bottom of the page. To zoom in or out, select Options > Zoom > In or Out. To find text, select Options > Find > Text, and enter the text you want to find. To find the next occurrence, select Options > Find > Next. To rotate the document, select Options > View > Rotate left or Rotate right. To save a copy of the document, select Options > Save, and specify where to save it. Settings Select Options > Settings and from the following settings: Default zoom % — to set the default zoom when opening a .pdf file for viewing View mode > Full screen — to open documents in full screen mode Save settings on exit > Yes — to save the settings as default when you exit Adobe Reader ■ Quickoffice To use the Quickoffice applications, select Menu > Applications > Quickoffice. To view a list of Word, Excel, and PowerPoint documents, scroll right or left to the Quickword, Quicksheet, or Quickpoint view. For example, available Microsoft Word documents are listed in the Quickword view. To open a file in its respective application, select it. To sort files, select Options > Sort by and an option. Quickword With Quickword, you can view native Microsoft Word documents on the display of your device. Quickword supports colors, bold, italics, and underline. 67 Quickword supports the viewing of documents saved in .doc format in Microsoft Word 97, 2000, XP, and 2003. Not all variations or features of the mentioned file formats are supported. View Word documents To move in the document, scroll. To search the document for text, select Options > Search options > Find. Quicksheet With Quicksheet, you can read Microsoft Excel files on the display of your device. Quicksheet supports the viewing of spreadsheet files saved in .xls format in Microsoft Excel 97, 2000, XP, and 2003. Not all variations or features of the mentioned file formats are supported. View spreadsheets To move around in the spreadsheet, scroll. To switch between worksheets, select Options > Worksheet. To search the speadsheet for a text within a value or formula, select Options > Search options > Find. To change how the spreadsheet is displayed, select Options and from the following: Pan — to navigate within the current worksheet by blocks. Scroll to the desired block, and select it. Zoom — to zoom in or out Freeze panes — to keep the rows and columns above and to the left of the selected cell visible Resize — to adjust the size of columns or rows Quickpoint With Quickpoint, you can view Microsoft PowerPoint presentations on the display of your device. Quickpoint supports the viewing of presentations created in .ppt format in Microsoft PowerPoint 2000, XP, and 2003. Not all variations or features of the mentioned file formats are supported. 68 View presentations To move between the slide, outline, and the notes view, scroll left or right. To move to the next or previous slide in the presentation, scroll down or up. To view the presentation in full screen, select Options > Full screen. To expand items in the presentation outline in the outline view, select Options > Outline > Expand. Quickmanager With Quickmanager, you can download software, including updates, upgrades, and other useful applications. You can pay for the downloads by phone bill or credit card. To open Quickmanager, select Menu > Applications > Quickoffice, and scroll right to the Quickmanager view. More information If you experience problems with Quickword, Quicksheet, or Quickpoint, visit quickoffice.com for more information. Support is also available by sending an e-mail to supportS60@quickoffice.com. 14. Settings ■ Profiles Select Menu > Settings > Profiles. In Profiles, you can adjust and personalize the device tones for different events, environments, or caller groups. You can see the currently selected profile at the top of the display in the standby mode. If the General profile is in use, only the current date is shown. To activate the profile, select the profile and Activate. Tip: To quickly change to Silent from any other profile, in the standby mode, press and hold #. To personalize a profile, select the profile, Personalise, and from the following options: 69 Ringing tone — To set the ringing tone (also a video ringing tone) for voice calls, choose a ringing tone from the list. Press any key to stop the sound. You can also change ringing tones in contacts. See "Add a ringing tone," p. 46. Video call tone — Select the ringing tone for video calls. Say caller's name — Select On to have the device say the caller’s name when the phone is ringing. Ringing type — When Ascending is selected, the ringing volume starts from level one and increases level by level to the set volume level. Ringing volume — Set the volume level for the ringing and message alert tones. Message alert tone — Set the alert tone for text and multimedia messages. E-mail alert tone — Set the alert tone for e-mail messages. Vibrating alert — Set the device to vibrate to alert for incoming calls and messages. Keypad tones — Set the volume level for keypad tones. Warning tones — Activate or deactivate warning tones. Alert for — Set the device to ring only upon calls from phone numbers that belong to a selected contact group. Phone calls coming from people outside the selected group have a silent alert. Profile name — Name the profile. This setting is not shown for the General and Offline profiles. When using Offline, the device is not connected to the cellular network. If no SIM card is installed, to use some functions of the device, start the device in Offline. Important: In the offline profile you cannot make or receive any calls, or use other features that require cellular network coverage. Calls may still be possible to the official emergency number programmed into your device. To make calls, you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code. ■ Themes To change the look of your device’s display, activate a theme. A theme can include the standby mode wallpaper and power saver. You can edit a theme to personalize your device further. Select Menu > Settings > Themes. To see a list of the available themes, select General. The active theme is indicated by a check mark. 70 To preview a theme, scroll to the theme, and select Options > Preview. To activate the previewed theme, select Set. In Themes, you can also set the menu view type, set a custom wallpaper, and personalize the power saver and the cover display. ■ 3-D tones With 3-D tones you can apply three-dimensional sound effects to ringing tones. Not all ringing tones support 3-D effects. To edit 3-D tone settings, select Menu > Settings > 3-D tones. To enable the 3-D effects, select 3-D tones > On. To change the ringing tone, select Ringing tone and the desired ringing tone. To change the 3-D effect that is applied to the ringing tone, select Sound trajectory and the desired effect. To modify the effect, select Trajectory speed, Doppler effect, or Reverberation. Doppler effect is not be available for all sound trajectories. To listen to the ringing tone with the 3-D effect, select Options > Play tone If you enable the 3-D tones but do not select any 3-D effect, stereo widening is applied to the ringing tone. ■ Voice commands To select the device functions to activate with a voice command, select Menu > Settings > Voice comm.. The voice commands for changing profiles are in the Profiles folder. To activate a new voice command for an application, select Options > New application and the application. To play the activated voice command, select Options > Playback. To use voice commands, see "Voice dialing," p. 21. ■ Phone settings General Select Menu > Settings > Phone sett. > General > Personalisation, Date and time, Slide handling, Enhancement, Security, Factory settings, Positioning, or My own key. 71 Personalisation Select Display, Standby mode, Tones, Language, Themes, or Voice comms.. Display Light sensor — to adjust the light sensor that observes the lighting conditions and adjusts the brightness of the display Font size — to select the font size used in lists and editors Power saver time-out — to set the time-out period after which the power saver is activated Welcome note / logo — to set the welcome note or logo which is displayed briefly each time you switch on the device. Light time-out — to set the time-out for the display light Standby mode Active standby — to enable or disable active standby. See "Active standby," p. 15. Active standby apps. — to select the application shortcuts to appear in the active standby. This setting is available only if Active standby is set to On. Shortcuts — to assign shortcuts for the right and left selection keys, scrolling in different directions or pressing the scroll key in the standby mode. The scroll key shortcuts are not available if Active standby is On. Operator logo — this setting is visible only if you have received and saved an operator logo. You can select whether the operator logo is shown. Tones Change the tones of the clock, calendar and currently active profile. See "Profiles," p. 69. Language Phone language — to change the language for the display texts in your device. This change may also affect the format used for date and time and the separators used, for example, in calculations. If you select Automatic, the device selects the language according to the information on your SIM card. After you have changed the display text language, the device restarts. Writing language — to change the writing language of your device. Changing the language affects the characters and special characters available when writing text and the predictive text dictionary used. Predictive text — to set predictive text input On or Off for all editors in the device. Select a language for entering predictive text from the list. 72 Themes Apply themes. See "Themes," p. 70. Voice commands Edit voice command and voice dialing settings. See "Voice commands," p. 71. Date and time Time and Date — to set the time and date Time zone — to set the time zone of your location. If you set Network operator time > Auto-update, the local time is shown. Date format — to select the format to display dates Date separator — to select the date separator Time format — to select between 24-hour and 12-hour time format Time separator — to select the time separator Clock type — to select whether the analog or digital clock is shown in the standby mode. See "Clock," p. 62. Clock alarm tone — to select the alarm clock tone Workdays — to specify days for alarms repeated only on workdays Network operator time (network service) — to allow the network to update time, date, and time zone information to your device. If you select Auto-update, all active connections are disconnected. Check any alarms as these may be affected. Slide handling Opening the slide — to select whether incoming calls are answered when opening the slide, select Answer incoming call or Call not answered Closing the slide — to select whether active calls are ended when closing the slide, select End active call or Continue active call Keyguard activation — to select whether the keypad is locked when closing the slide, select On when closing slide or Off when closing slide. To receive a query every time when closing the slide, select Always ask. Enhancement To change settings of an enhancement, in the Enhancement sett. view, scroll to an enhancement, such as Headset, select Options > Open and from the following options: 73 Default profile — to select the profile you want to activate each time you connect the enhancement to your device Automatic answer — to set the device to answer an incoming call automatically after 5 seconds when this enhancement is connected to your device. If the Ringing type is set to Beep once or Silent, automatic answer cannot be used, and you must answer the call manually. Lights — to set the device lights continuously on while using the enhancement, select On. Security Select Phone and SIM card, Certificate management, or Security module. Phone and SIM card You can change the following codes: lock code, PIN or UPIN code, and PIN2 code. These codes can only include the numbers from 0 to 9. Avoid using access codes similar to emergency numbers to prevent accidental dialing of the emergency number. Code in use — to select the active code, PIN or UPIN, for the active USIM. This is shown only if the active USIM supports UPIN, and the UPIN is not rejected. PIN code request or UPIN code request — to set the device to request the code each time the device is switched on. Some SIM cards may not allow the PIN code request to be turned Off. If you select Code in use > UPIN, UPIN code request is shown instead. PIN code or UPIN code, PIN2 code, and Lock code — to change the codes Keypad autolock period > User defined — to automatically lock the keypad after a defined period of inactivity Phone autolock period — to set a time-out after which the device is automatically locked. To use the device again, you need to enter the correct lock code. To turn off the autolock period, select None. Lock if SIM card changed — to set the device to prompt for the lock code when an unknown, new SIM card is inserted into your device. The device keeps a list of SIM cards that are recognized as the owner cards. Closed user group (network service) — to specify a group of people whom you can call and who can call you. For more information, contact your service provider. To activate the default group agreed on with the service provider, select Default. If 74 you want to use another group (you need to know the group index number), select On. When calls are limited to closed user groups, calls may be possible to the official emergency number programmed into your device. Confirm SIM services (network service) — to set the device to display confirmation messages when you use a SIM card service Certificate management A list of authority certificates that have been stored in your device is displayed in Certificate management. To see a list of personal certificates if available, scroll right. Digital certificates should be used if you want to connect to an online bank or another site or remote server for actions that involve transferring confidential information. They should also be used if you want to reduce the risk of viruses or other malicious software and be sure of the authenticity of software when downloading and installing software. When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing), calls may be possible to the official emergency number programmed into your device. Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If "Expired certificate" or "Certificate not valid yet" is shown even if the certificate should be valid, check that the current date and time in your device are correct. Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner. View certificate details and check authenticity You can only be sure of the correct identity of a server when the signature and the period of validity of a server certificate have been checked. The device notifies you if the identity of the server is not authentic or if you do not have the correct security certificate in your device. To check certificate details, scroll to a certificate, and select Options > Certificate details. While opening the certificate details, the device checks the validity of the certificate and one of the following notes may appear: 75 Expired certificate — The validity period has ended for the selected certificate. Certificate not valid yet — The validity period has not yet begun for the selected certificate. Certificate corrupted — The certificate cannot be used. Contact the certificate issuer. Certificate not trusted — You have not set any application to use the certificate. Change the trust settings Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner. Scroll to an authority certificate, and select Options > Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown. Security module View or edit security modules. Factory settings Reset some of the settings to their original values. You need the lock code. See "Lock code," in "Access codes," p. 18. My own key My own key — to configure pressing the my own key to open a specific application. See "My own key," p. 19. Positioning With the positioning service you can receive information from service providers about local issues such as weather and traffic conditions, based on the location of your device (network service). To enable a positioning method, select Positioning methods, scroll to the positioning method, and select Options > Enable. To stop using it, select Options > Disable. To define the positioning server access point, select Positioning server > Access point and the desired access point. Then select Server address, and enter the domain name or URL address of the server. 76 Phone Select Menu > Settings > Phone sett. > Phone and Call, Call divert, Call barring, or Network. Call Send my caller ID (network service) — to set your phone number to be displayed (Yes) or hidden (No) from the person whom you are calling. The value may be set by your service provider when you subscribe to the service (Set by network). Call waiting (network service) — to set the network to notify you of a new incoming call while you have a call in progress. To request the network to activate call waiting, select Activate. To request the network to deactivate call waiting, select Cancel. To check whether the function is active, select Check status. Reject call with SMS — to enable rejecting phone calls with a text message. See "Answer or reject a call," p. 23. Message text — to enter a text to be sent when you reject a call with a text message Image in video call — to select a still image to be shown instead of the video when you deny video sending in a video call Automatic redial — to set the device to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt. Press the end key to stop automatic redialing. Summary after call — to set the device to briefly display the approximate duration of the last call Show call duration — to set the device to display the call duration during a call Speed dialling > On — to set the device to dial the numbers assigned to the speed dialing keys, 2 to 9, by pressing and holding the corresponding number key Anykey answer > On — to answer an incoming call by briefly pressing any key, except the left and right selection keys, volume keys, my own key, Navigator key and the end key Line in use (network service) — shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line (Line 1 or Line 2) you want to use for making calls and sending short messages. Calls on both lines can be answered irrespective of the selected line. You cannot make calls if you select Line 2 and have not subscribed to this network service. To 77 prevent line selection, select Line change > Disable if supported by your SIM card. To change this setting, you need the PIN2 code. Call divert Call divert is a network service. 1. Select which calls you want to divert: Voice calls, Data and video calls, or Fax calls. 2. Select the desired option. For example, to divert voice calls when your number is busy or when you reject an incoming call, select If busy. 3. To set the divert option on or off, select Activate or Cancel. To check whether the option is activated, select Check status. Several divert options can be active at the same time. Call barring and call diverting cannot be active at the same time. Call barring Call barring (network service) allows you to restrict the calls that you make and receive with your device. To change the settings, you need the barring password from your service provider. Scroll to the desired barring option, and to request the network to set call restriction on, select Options > Activate. To set the selected call restriction off, select Cancel. To check whether the calls are barred, select Check status. To change the barring password, select Edit barring password. To cancel all active call barrings, select Cancel all barrings. Call barring and call diverting cannot be active at the same time. When calls are barred, calls may be possible to certain official emergency numbers. Network Network mode — To select which network to use (shown only if supported by the service provider). If you select Dual mode, the device uses the GSM or UMTS network automatically, according to the network parameters and the roaming agreements between the network operators. Operator selection — To set the device to search for and select automatically one of the available networks, select Automatic. To select the desired network manually from a list of networks, select Manual. If the connection to the manually selected network is lost, the device sounds an error tone and asks you to select a network again. The selected network must have a roaming agreement with your home network, that is, the operator whose SIM card is in your device. 78 Cell info display (network service) — To set the device to indicate when it is used in a cellular network based on microcellular network (MCN) technology and to activate cell info reception, select On. Connection Select Menu > Settings > Phone sett. > Connection > Bluetooth, USB, Access points, Packet data, Data call, SIP settings, Configurations, or APN control . Bluetooth Switch Bluetooth on or off, and edit Bluetooth settings. See "Bluetooth connection," p. 85. USB Edit USB settings. See "USB data cable," p. 87. Access points To establish a data connection, an access point is required. You can define different kinds of access points: • MMS access point to send and receive multimedia messages • WAP access point to view web pages • Internet access point (IAP) (for example, to send and receive e-mail) Check which kind of access point you need with your service provider for the service you wish to access. For availability and subscription to data connection services, contact your service provider. You may receive access point settings in a message from your service provider, or you may have preset access point settings in your device. To create a new access point or edit an existing access point, select Options > New access point or Edit. To create a new access point using the settings of an existing access point, scroll to an access point, and select Options > Duplicate access point. Depending on the connection type selected in Data bearer, only certain settings are available. Fill in all fields marked with Must be defined or with an asterisk. Contact your service provider for the following settings: Data bearer, Access point name (for packet data only), Dial-up number (for data call only), User name, Password, Authentication, Homepage, Data call type (for data call only), and Maximum data speed (for data call only). Connection name — Enter a descriptive name for the connection. 79 Prompt password — If you must enter a new password every time you log onto a server, or if you do not want to save your password to the device, select Yes. If necessary, to define the internet protocol (IP) version, phone IP address, domain name system (DNS) servers, proxy server, and advanced data call settings, such as callback, PPP compression, login script, and modem initialization string, select Options > Advanced settings. Contact your service provider for the correct settings. Packet data The packet data settings affect all access points using a packet data connection. Packet data connection — If you select When available and you are in a network that supports packet data, the device registers to the packet data network and short messages are sent using a packet data connection. If you select When needed, the device uses a packet data connection only if you start an application or function that needs it. The packet data connection can be closed when it is not needed by any application. If there are no packet data services available and you have chosen When available, the device periodically tries to establish a packet data connection. Access point — The access point name is needed when you want to use your device as a modem with your computer. High speed packet access — Enable or disable the use of HSDPA (network service) in UMTS networks. When HSDPA support is activated, downloading data such as messages, e-mail, and browser pages through the cellular network may be faster. Data call The data call settings affect all access points that use a GSM data call. Online time — to set the data call to disconnect automatically after a time-out if there is no activity. To enter a time-out, select User defined, and enter the time in minutes. If you select Unlimited, the data call is not disconnected automatically. SIP settings View and edit session initiation protocol (SIP) profiles. Configurations Certain functions, such as web browsing and multimedia messaging, may require configuration settings. You may receive the settings from your service provider. See "Configuration settings," p. 13. 80
FREE ENGLISH PDF
USER GUIDE - USER MANUAL
OWNER GUIDE - OWNER MANUAL
REFERENCE GUIDE - REFERENCE MANUAL
INSTRUCTION GUIDE - INSTRUCTION MANUAL