NITECORE MT1A PRO (01) PDF Document

The NITECORE MT1A PRO includes the following features:

• Utilizes a UHi 25 LED with a max output of 800 lumens.

• Max peak beam intensity of 15,700cd and max throw of 250 meters.

• An optical system combined with crystal coating and Precision Digital Optics Technology (PDOT).

• A single tail switch controls 3 brightness levels.

• Powered by 1 x 14500 Li-ion battery while compatible with 1 x AA battery.

• Includes a NITECORE 14500 rechargeable Li-ion battery (NL1411R 1,100mAh) with a built-in USB-C charging port, offering a runtime up to 10 hours.

• Intelligent brightness level memory function.

• Highly efficient constant current circuit provides a stable output.

• Incorporated Advanced Temperature Regulation (ATR) module.

• Two-way clip included.

• Electronic reverse polarity protection.

• Optical lenses with double-sided scratch resistant coating.

• Constructed from aero grade aluminum alloy.

• HA III military grade hard-anodized finish.

• Tail stand capability.

• Waterproof and dustproof rating in accordance with IP68 (2 meters submersible).

• Impact resistant to 2 meters.

The NITECORE MT1A PRO comes with the following accessories:

• NITECORE 14500 Rechargeable Li-ion Battery (NL1411R 1,100mAh)

• USB-C Charging Cable

• Lanyard

• Spare O-ring

• Clip

The physical specifications for the NITECORE MT1A PRO are as follows:

• Length: 93.0mm (3.66″)

• Head Diameter: 19.7mm (0.78″)

• Tube Diameter: 17.2mm (0.68″)

• Tail Diameter: 19.5mm (0.77″)

• Weight (Battery Not Included): 32g (1.13 oz)

• Weight (Battery Included): 52g (1.83 oz)

The NITECORE MT1A PRO is compatible with the following battery options:

To install or remove the battery in the NITECORE MT1A PRO:

1. Unscrew the battery cap from the tail of the flashlight.

2. Insert or remove the battery as illustrated in the diagrams.

3. Screw the battery cap back on securely.

Warning: Ensure the battery is inserted with the negative (-) end facing towards the battery cap. The NITECORE MT1A PRO will not work if the battery is incorrectly inserted.

To turn the NITECORE MT1A PRO on or off:

• On: When the light is off, full press the Tail Switch until a click sound is heard.

• Off: When the light is on, full press the Tail Switch until a click sound is heard.

When the NITECORE MT1A PRO is on, half press the Tail Switch or turn the flashlight off and back on within 2 seconds to cycle through the brightness levels in the following order: LOW – MID – HIGH.

The NITECORE MT1A PRO features an intelligent brightness level memory. After the flashlight has been turned off for more than 2 seconds, reactivating it will automatically access the previous memorized brightness level.

The NL1411R rechargeable Li-ion battery included with the NITECORE MT1A PRO has a built-in USB-C charging port. To charge it:

1. Remove the battery from the NITECORE MT1A PRO.

2. Connect a USB cable to the charging port on the battery.

3. Connect the other end of the cable to an external power supply such as a USB adapter or other USB charging device.

4. The charging time is approximately 3 hours when using a 5V/1A adapter.

5. Charging Indication: During charging, a red indicator on the battery will turn on steadily. When fully charged, the indicator will turn green steadily.

The battery in the NITECORE MT1A PRO should be charged or replaced when the light output appears to be dim or the flashlight becomes unresponsive due to low power.

The following data is measured using 1 x 14500 Li-ion battery (1,100mAh) for the NITECORE MT1A PRO:

Note: The HIGH level data is tested without the temperature regulation feature active.

The following data is measured using 1 x AA battery for the NITECORE MT1A PRO:

Note: The HIGH Level cannot be activated when using a standard AA battery with the NITECORE MT1A PRO.

The integrated ATR technology regulates the output of the NITECORE MT1A PRO according to the working conditions and ambient environment to maintain optimal performance.

To keep the NITECORE MT1A PRO in optimal condition, the threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant every 6 months.

Follow these safety guidelines for the NITECORE MT1A PRO:

• Do not stare directly into the light beam or shine it into the eyes of others.

• Caution: The product generates massive heat during prolonged operation. It is recommended not to use high brightness levels for extended periods.

• Do not cover or place objects near the head of the product to avoid accidents or damage from high temperatures.

• Do not use the light to illuminate flammable or explosive materials.

• Do not submerge the NITECORE MT1A PRO into any liquid when it is hot, as the pressure difference may cause irreparable damage.

• When placed in an enclosed environment like a pocket or backpack, or when left unused for a long period, loosen the battery cap to avoid accidental activation.

• Do not expose the device to temperatures above 60 degrees Celsius (140 degrees Fahrenheit) for prolonged periods.

• Recharge the battery every 6 months when left unused for a long time.

To ensure battery safety for the NITECORE MT1A PRO:

• Do not use the battery if its wrapper is damaged or if its discharge current does not match the product.

• Do not disassemble, puncture, cut, crush, incinerate, or short-circuit the battery.

• Do not mix batteries of different brands or types.

• If leakage, abnormal odor, or deformation is noticed, stop using the battery immediately and dispose of it properly according to local laws.