Free English NILS NC0122 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD NILS NC0122 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the specifications for the NILS NC0122?
The Model is NC0122.
The Diameter is 100cm.
The Maximum capacity is 612L.
The Product Weight is 4.23kg.
The Maximum user weight is 100kg.
The Material is PVC 60%, polyester 25%, foam 15%.
What items are included in the set for the NILS NC0122?
The set includes:
1 x Ice Tub
8 x Support Legs
1 x Hand pump
1 x Portable bag
1 x Drain hose
1 x Weather cover
1 x Thermo lid
Repair kit
User manual
What are the steps for unpacking the Ice Tub for the NILS NC0122?
Step 1. Identify a suitable location with a flat, solid surface for unpacking and setting up your Ice tub.
Step 2. Follow the steps outlined in the QUICK GUIDE.
Step 3. Thoroughly review this user manual before using the Ice tube for the first time.
What is the QUICK GUIDE for setting up the NILS NC0122 Ice Tub?
Step 1. Begin by inserting the six support legs into the corresponding holes located around the base of Ice tube. Make sure the feet are positioned at the bottom and that they rest securely on a stable surface.
Step 2. Inflate the ‘Top Ring’ and ‘Thermal cover’ of the Ice tub using the provided hand pump. Ensure the pump is fully inserted into the valve, and inflate until the rings appear smooth and firm. Once properly inflated, seal the valve on the top ring using the safety cap.
Step 3. Before adding water, double-check that the base drain valve is securely sealed and hand-tight.
Step 4. To empty Ice tub, utilize the external drain tap along with the included hose to direct the water into a nearby sink or drain.
Step 5. After assembling the Ice tube, you can start filling it with cold water.
What is described in Photo 1, Photo 2, Photo 3, and Photo 4 for the NILS NC0122 assembly?
Photo 1 – Unfold the batthub
Photo 2 – Insert eight plastic tubes
Photo 3 – Inflate the air ring. When inflating, put out the first layer cap. When deflating, put out the second layer
Photo 4 – The product is ready to use
How should the NILS NC0122 Ice Tub be cleaned and maintained?
Step 1. It can be cleaned with water, regular dishwashing detergent, etc. The most important thing is to ensure that it is completely dry when and kept in a well-ventilated area.
Step 2. When using the product for the first time, please clean it with warm water.
Step 3. Never begin filling the tub with only hot water; always adjust the temperature to the appropriate level. The water level should be filled according to individual preferences.
What warnings should be considered before using the NILS NC0122 Ice Tube?
Consult your doctor before use, especially if you have health problems such as heart disease or high blood pressure. Ice Tube can cause a strong reaction to cold, which is not safe for everyone. Use with caution and monitor your well-being.
Utilizing an ice bath significantly reduces your core body temperature. When you immerse yourself in cold water, it leads to the narrowing of blood vessels and a reduction in blood circulation throughout the body. This, along with potential health issues, can result in elevated blood pressure, increasing the risk of heart attack or stroke.
If you want to set up your Ice Tube on a balcony in your apartment building, it is crucial to verify the maximum weight limit of your balcony. Overloading the structure can lead to serious safety hazards, including potential damage to the balcony and risk of injury.
CLICK HERE TO DOWNLOAD NILS NC0122 (01) PDF DOCUMENT