NATURE BRIGHT INSPIRATION L40.40 (01) PDF Document

To reduce the risk of electric shock, burns, fire, or other injuries, please follow these safety precautions:

Do not place the NATURE BRIGHT INSPIRATION L40.40 table lamp in water or near heated surfaces.

To prevent inadvertent contact with water, do not use your lamp while bathing and do not pick up the adapter or cord if your hands are wet.

Use only approved power sources with your lamp.

Before turning on your NATURE BRIGHT INSPIRATION L40.40 table lamp, attach the power cord to the unit and then connect the cord to an adapter or outlet.

Turn the unit OFF before removing the adapter from any outlet.

Unplug the unit before cleaning.

Detach the power cord from the unit for safe storage.

Do not place items on top of the power cord.

Do not operate the unit if the cord or unit has been damaged. Should the unit appear to be damaged, return to an approved service center for repair.

The NATURE BRIGHT INSPIRATION L40.40 table lamp is designed to be used as a portable bright light therapy device, a table reading lamp, and a dawn simulator alarm clock. Its features include:

Light Therapy: LED lamp gives you maximum light therapy benefit with minimum strain.

Sunrise Feature: Experience the benefits of rising with the sun. The programmable SUNRISE feature activates the built-in light which fades in from zero to full intensity.

Digital Display: Easy-to-read digital clock display can be dimmed or used at full brightness.

Snooze Button: 10 minute snooze feature includes a soft bird-song at the end of each cycle.

Alarm: Backup alarm feature is accompanied within a snooze button, which activates once the light reaches its maximum brightness.

Plug in the lamp.

Press [On/Off/Snooze] to turn the power on.

Press and Hold [CLOCK] until the month blinks.

Press [+ or -] to set the correct month.

Press [CLOCK] to save your new settings. You will now see the day setting blinking.

Press [+ or -] to set the correct day.

Press [CLOCK] to save your new settings. You will now see the day of the week blinking.

Repeat these steps to set the hour and minute.

When you have completed your new settings, press [CLOCK] one more time to store your settings and EXIT the settings mode.

Press Quickly [CLOCK] until the hour blinks.

Press [+ or -] to set the correct hour.

Press [CLOCK] to save your new settings. You will now see the minute setting blinking.

Press [+ or -] to set the correct minute.

Press [CLOCK] to save your new settings.

This unit has two alarms: Sunrise A and Sunrise B, which can be set to different times and different days of the week.

Sunrise A: has a buzzer alarm sound.

Sunrise B: has a simulated bird singing alarm sound.

The unit simulates the light of a summer dawn by increasingly raising the intensity of light prior to the alarm time to help you wake up gradually. For the best effect, point the lamp head towards your pillow before you go to sleep.

Press [SUNRISE] to activate or deactivate the SUNRISE. You will see the SUNRISE indicator appear on the LCD display.

Press [SUNRISE A] to turn the Sunrise A feature on.

Press and hold [SUNRISE A] until the wake up hour blinks.

Press [+ or -] to set the wake up hour.

Press [SUNRISE A] again to save your new wake up hour settings. You will automatically see the wake up minute blinking.

Press [+ or -] to set the wake up minute.

Press [SUNRISE A] to save your wake up minute settings. You will automatically see the advanced sunrise time (minutes prior to the wake up time) blinking.

Press [+ or -] to set the advanced sunrise time.

Press [SUNRISE A] again to save your new settings.

Press [SUNRISE B] to turn the Sunrise B feature on.

Press and hold [SUNRISE B] until the wake up hour blinks.

Press [+ or -] to set the wake up hour.

Press [SUNRISE B] to save your wake up hour settings. You will automatically see the advanced sunrise time (minutes prior to the wake up time) blinking.

Press [+ or -] to set the advanced sunrise time.

Press [SUNRISE B] again to save your new settings.

Press [On/Off/Snooze] to turn the light system on or off.

When the alarm sounds (bird-song) and the light system is at full brightness, you have two options—you can stop the alarm and have it re-sound in 10 minutes, or you can turn it off.

1. Press [On/Off/Snooze] once to activate Snooze. This turns off the alarm temporarily. Your alarm will replay in 10 minutes.

2. Press [On/Off/Snooze] twice to turn off the alarm.

The [-] button dims the light and the [+] button brightens the light.

This unit uses electro-luminescent panels to backlight the LCD when the unit is on.

Press any key except [On/Off/Snooze] if you would like to turn on the backlight for a few seconds to check the time.

Press [On/Off/Snooze] button to turn device off, press [-] button to dim the back-light and press [+] button to brighten the back-light.

For best results, place the lamp on your bedside stand and use the light at an angle to your face or over your pillow in the morning. You may also place the lamp on a table and sit about 20 inches away from the light and allow the light to bathe over your face.

Your eyes should be open for optimal results, but do not look directly into the light.

If you find that you feel sensitive to the light, adjust intensity (brightness) and duration (timer) settings.

People usually start feeling better within a few days of using the Inspiration™ for 30 minutes per day.