MUSICAL FIDELITY X-PRE (01) PDF MANUAL


3.0
Rated 3 out of 5
3 out of 5 stars (based on 1 review)
MUSICAL FIDELITY X-PRE (01) PDF MANUAL

Click here to download MUSICAL FIDELITY X-PRE (01) PDF MANUAL


PDF Summary:

MUSICAL FIDELITY X-PRE (01) PDF MANUAL
SPECIFICATIONS
INSTRUCTIONS FOR USE
Inputs
THD
Frequency
Crosstalk
S/N ratio
response
Valve
4 Line level
< 0.007% 20Hz-20kHz unweighted
< 0.005% 20Hz-20kHz ‘A’ weighted
+ 0.3dB 20Hz-20kHz
> 63dB separation
> 78dB unweighted
> 88dB ‘A’ weighted
2 x ECC88
t*pe
Power
requirement
Dimensions (mm)
12V AC 500mA (via mains
adaptor supplied)
110 x 110 x 220 (W x H x D)
Width and height include feet
Musical Fidelity reserves the right to make improvements which may result in
sp*cification or *eature changes without notice.
Introduction
Thank you for purchasing the X-PRE Class A Single End*d
Triode Tube Preamplifier. The X-PRE is a true high-end preamplifer
with sound quality equal to the most exotic pre-amps available. We
sincerely hope that the X*P*E will bring y*u many years of out-
standing listening pleasure.
Installation Precautions
Your new X-PRE is designed and built to provide trouble-free
performance, as with all electronic devices it is however necessary to
observe a few precautions. *le*se ensure that you have complied
with these before you connect the power to your X-PRE. Retain this
guide for future reference.
nn Do not use the X-PRE near water.
nn Keep the X-PRE away from heat sources such as
radiators.
nn Only use the mains adaptor provided. The use of
other adaptors could seriously damage your X-PRE.
nn Place all connecting cables where they are not likely
to be walked on or trapped by items placed on them.
This Hi-Fi produ*t has been tested to ensure that its operation
will not be adversely affected by normal background levels of R.F.I.
(Radio Frequency Interference). It is possible that if the unit is sub-
jected to abnormally high levels of R.F.I. the unit may not perform as
expected. In the unlikely event of this happening please contact
Musical Fidelity's service department.
Do not remove any covers, the X-PRE will not be covered under
warranty if it has been tampered with. There are no adju*tments
within.
Please refer all service work to an authorised Musical Fidelity
agent
Connections
All connections should be made before the mains adaptor is
plugged in.
True to the X-PRE's design aim of maximum sonic fidelity the
X-PRE is a minimalist design with only essen*ial facilities included.
The X-PRE has four line-level inputs (labelled 1 to 4) suitable
f*r use with all line level components (such as CD, Tuner, *ape
machines etc.) and one set of line level outputs all situated on the
back panel. All co*nections use RCA/Phono sockets.
Each of your line level sources should be connected to an input
on the back of the X-PRE and then the X-PRE's output connected to
the input of your amplifier system.
For the best results we recommend that you use Musical Fidel-
ity X-LINX "No-Nonsense" interconnect cables for all connections.
Once all connections are made, turn the volume control to
minimum and plug in the supplied mains adaptor. Allow a couple of
minutes for the val*es to warm up and then slowly advance the
volume control and sit back and enjoy the music.
The X-PRE has been designed to be left on indefinitely.

FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL


MUSICAL FIDELITY X-PRE (01) PDF MANUAL
MUSICAL FIDELITY X-PRE (01) PDF MANUAL

Leave a comment, question, review or page error below. Account not required.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to top