Free English MSI D1505 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.


CLICK HERE TO DOWNLOAD MSI D1505 (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.


How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.


What is the maximum capacity of memory supported by the MSI D1505?

The MSI D1505 supports up to 4800 MT/s (DDR5) and uses ECC and non-ECC UDIMMs, with memory speeds up to 4800 MT/s (DDR5) and 3600 MT/s (DDR4). It has a maximum capacity of 32 GB per DIMM.


What are the specifications for the DMMs regarding the MSI D1505?

The following table shows the recommended population for the DMMs on the MSI D1505:

Quantity of DMMs V V V V
Channel B DMMB0 DMMB1 DMMB2 DMMB3
Channel A DMMA0 DMMA1 DMMA2 DMMA3

“V” indicates a populated DIMM slot.


What are the SATA and BMC heartbeat LED descriptions for the MSI D1505?

The LED descriptions for the MSI D1505 are as follows:

Name Description
INWME_SATA_SEL1 INWME SATA/INWME signal select jumper default (pin 2-3, 1. SATA)
INWME_SATA_SEL2 INWME SATA/INWME signal select jumper default (pin 2-1, 2. SATA)
BMC_LED_1 BMC heartbeat LEDs
LED_H1_LED1 Port 80 debug LEDs

What are the important warnings to consider when operating the MSI D1505?

Only install DIMMs if the board is powered off. Install DIMMs only if the board is powered off. For maximum performance, paired memory installation is recommended. If only one DIMM is populated in a channel, populate it in the DMMA0 slot. Populate the same DIMM type in each channel, specifically 1. Use the same size, 2. Use the same speed, 3. Use the same rank. We do not suggest other memory installation.


What are the names and descriptions of the connectors and jumpers on the MSI D1505?

The following table lists the names and descriptions for the connectors and jumpers on the MSI D1505:

Name Description
JPW01 8 pin 12V power connector
JPW02 24 pin main power connector
INWME0-2 SATA connectors
INWME0-3 8 inline SAS UI connectors
INWME_SATA1 Similuxe SAS UI connectors
INWME_SATA2 Similuxe SAS UI connectors
M_I M.2 slot (M Key, PCIe 4.0 x4, 221102 2280)
PCIE_1 PCIe slot 1. 8 lane slot 16 signal from CPU
PCIE_2 PCIe slot 2. 8 lane slot 16 signal from CPU
FANFANT-4 Fan connectors
JFP1 Front panel header
JPTPM TPM header
JCOM1 COM port header
JGPIO1 GPIO header
JPBU1 Pbus header
JBC_1, JBC_1_RBP_1, JBC_2 JBC headers
JFPB1 IPMB header
JCI1 Chassis intrusion header
JUSB1 USB 3.2 Gen 1 header
JUSB2 USB 3.2 Gen 1 Type-A ports
REAR_USB1 USB 2.0 Gen 1 Type-A ports (on rear side)
MLAN_USB1 USB 3.2 Gen 1 Type-A ports (on rear side)
JSPP0-1 250 SPP LAN ports (on rear side)
LAN_LED1 SPP1/8 LAN LEDs (on rear side)
COM3 COM port (on rear side)
VGA1 VGA port (on rear side)
JPW1 CPU power connector (default pin 1-2, disable)
JPSW_RST Power switch jumper (default pin 1-2, normal)
CHASSIS_INTRUSION Password clear jumper (default pin 1-2, normal)
INWME_TEMP_SENS0R SPI switch jumper (default pin 2-3, normal)

What are the pin definitions for the Front Panel Connector (JFP1) on the MSI D1505?

The pin definitions for the Front Panel Connector (JFP1) on the MSI D1505 are as follows:

Pin No. Name Pin No. Name
1 PWR_LED+ 2 FP_PINS
3 PWR_LED- 4 SPP_DL_LED
5 HDD_ACT_LED+ 6 SPK_NMI_LED+
7 HDD_ACT_LED- 8 NMI_ACT_LED+
9 RESET_SW 10 NMI_ACT_LED-
11 PWR_BTN_D 12 CHASSIS_ON
13 SPS_DL_LED+ 14 CHASSIS_INTRUSION
15 SPS_DL_LED- 16 INWME_TEMP_SENSOR
17 RESET_SW_R 18 NMI_ACT_LED+
19 SPS_DL_LED+ 20 NCAL_ACT_LED-
21 NCAL_ACT_LED+ 22 NCAL_ACT_LED-
23 NCAL_ACT_LED+ 24 NCAL_ACT_LED-

What CPU is compatible with the MSI D1505?

The MSI D1505 is compatible with Intel Xeon E-2400 processor series.


CLICK HERE TO DOWNLOAD MSI D1505 (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.