MOVON MVT-9 (01) PDF Document

Please be aware of the following policies and responsibilities when using the MOVON MVT-9:

• Any inappropriate or illegal activities or violation of traffic rules on the roads are the driver’s responsibility. MOVON Corporation will not compensate for any damage nor accept responsibility related to such behaviors.

• It is the user’s responsibility to adhere to private information and traffic-related laws. The MVT-9 provides warnings to the driver and transmits video data to the MOVON server/platform. The final decision to maneuver or control the vehicle must be made by the driver.

• The performance of safety functions may be affected by driver status, road environments, weather conditions, and installation.

• Customer service for issues incurred by controlling the device while driving or by damaging/revamping it will not be guaranteed by MOVON’s policy.

• MOVON shall NOT be responsible for any problems and/or damages that may occur from not using genuine or MOVON authorized parts and accessories. It is strongly recommended to use parts and accessories (including micro SD card) provided by MOVON or a MOVON authorized seller.

• The information in the user manual may not be up-to-date due to upgrading or editing purposes. The manual can be modified at any time without notification to enhance the software.

• The product software may be modified for better performance without prior notice.

Violating the following precautions may result in personal injury, death, or property damage:

• Do not install the device in disregard of installation instructions. It is recommended to go to an authorized workshop.

• Do not use damaged/modified cables or voltage outside of the rated voltage, as it may cause injury, death, or property damage.

• Do not modify nor disassemble the product and cables. It can cause an explosion or fire resulting in injury or property damage.

• Do not use chemicals on the device, as it can cause fire, electric short, or malfunction.

• Do not attach the MVT-9 where it can obstruct the driver’s view.

• Do not operate the device while driving; it is prohibited by law. If necessary, operate it after stopping in a secure area.

• Do not apply excessive force when pushing the buttons. Do not leave the product where infants, children, or pets can reach it.

• The operating temperature is -4°F to 158°F (-20°C to 70°C). The MVT-9 may not operate properly and can be damaged if exposed to temperatures outside this range.

• Functions may not work properly due to camera location, angle, and weather conditions.

• Recorded videos are for personal use only. The video quality is not guaranteed to prove specific images.

• If the product is damaged or the power supply is cut due to an accident, video may not be recorded.

• Foreign substances or fingerprints on the lens may cause improper safety function performance.

• If recorded videos are broken due to user mishandling, the damaged video is not guaranteed to be recoverable.

• Do not separate the micro SD card from the MVT-9 while the power is on. Separate it only after turning off the MVT-9 if necessary.

The package contains the following items:

• MVT-9 main unit

• 3-wire cables (Power/GND/ACC)

• Micro SD card (64GB)

• Locking Screw Tool

The main components of the MOVON MVT-9 are:

• Front (facing driver): DSM Camera, IR LED, Status LED, Mic, and Button panel.

• Front (facing road): ADAS Camera.

• Top: Top Cap, Windshield Tape Cradle.

• Side: Side Slide Cover, which conceals the Micro SD Card and Nano USIM slots, Ambient Light Sensor.

• Bottom: Speaker.

The MOVON MVT-9 uses a 3-wire cable for vehicle power connection. Connect the wires as described in the table below. The fuse on the cable uses 3A.

The MOVON MVT-9 has three LED indicators: Record (Green), Status (2 Colors – Green/Red), and Communication (Blue). Their behavior indicates the device’s current status:

The buttons on the MOVON MVT-9 are used separately for different functions. Please review the functions below before making adjustments.

The default setting for the MOVON MVT-9 is FHD High 1080p x 30fps with a 64GB Micro SD card. The recording unit can be changed according to settings. Below are the details for different recording types and their triggers.

Please note the following regarding the Micro SD card:

• Depending on your environment, the actual recording duration and Micro SD card lifespan may vary.

• For stable performance, it is recommended to format the Micro SD card every 2-3 weeks.

• Formatting will delete all data on the Micro SD card. If you want to keep the data, please back it up in advance.

• If formatting the Micro SD card fails more than twice in the device, please try formatting it with a PC.

• When you remove the Micro SD card, please make sure the device is completely powered off.

• The Micro SD card is a consumable accessory. MOVON does not guarantee a certain period of lifespan for the Micro SD card. It is recommended to check the status of the Micro SD card on a regular basis. If the card is not working properly, please contact the seller and purchase a new one.

The MOVON MVT-9 includes several ADAS features to help prevent drowsy or reckless driving:

• Lane Departure Warning (LDW): Warns when the driver changes lanes over a solid lane at speeds above 40km/h.

• LDW Freq LC (FLC): Warns when changing lanes frequently (regardless of lane type) over a set number of lane changes per second.

• Forward Collision Warning (FCW): Warns in situations where there is a risk of collision with the vehicle in front. Operates above 30km/h.

• Forward Collision Warning 2 (FCW2): When changing lanes, it warns if there is a risk of collision with the vehicle in front.

• Forward Proximity Warning (FPW): Alerts the driver when a vehicle is within a set range. Operates between 0 to 30km/h.

• Pedestrian Collision Warning (PCW): Alerts the driver when a pedestrian is nearby and approaching the vehicle. Operates between 0 to 50km/h.

• Front Vehicle Start Alarm (FVSA): While stopped, it detects the movement of the vehicle in front and provides a warning if that vehicle stops for more than 2 seconds after moving.

• Headway Monitoring Warning (HMW): Attracts the driver’s attention to keep a safe distance from the vehicle in front by issuing a warning.

The MOVON MVT-9 includes several DSM features to monitor the driver and prevent unsafe driving:

• Drowsiness: An alarm occurs if you close your eyes for a certain period of time while driving.

• Distraction: An alarm occurs if you do not look ahead for a certain period of time while driving.

• Yawning: An alarm occurs if you yawn while driving.

• Phone Use: An alarm occurs when you are using a mobile phone while driving.

• Smoking: An alarm occurs when you are smoking while driving.

• Seat-belt Reminder: An alarm occurs when the belt is not worn.

• Driver ID Detection: An alarm occurs when a person other than the registered driver sits in the seat.

Follow these steps to connect your MOVON MVT-9 to the mobile app:

Step 1. Turn your vehicle on and wait for the MVT-9 to boot up. You will see an LED light sequence, ending in solid green.

Step 2. Press the Multi-Function button on the device to enable Bluetooth and Wi-Fi. The green and red LED lights will start blinking.

Step 3. From your mobile device, open the application and select the serial number that corresponds to your MVT-9 device.

Step 4. When the Bluetooth is completely connected, tap “Join”. The device will then automatically connect to Wi-Fi. You may need to allow Wi-Fi access to enter the Main Menu of the mobile app.

Please be aware of the following performance limitations of the MOVON MVT-9:

• The MVT-9 doesn’t guarantee 100% accuracy in detecting driver status or providing warnings for all potential accident causes.

• The MVT-9 doesn’t give alerts until it recognizes the driver’s face. If the driver closes their eyes or opens them only slightly on purpose during face detection, it may trigger false alerts. Depending on facial characteristics, the device may not detect/recognize the driver properly.

• Direct sunlight on the camera lens or the driver’s face can adversely affect recognition performance. If the vision sensor is partially or fully blocked, its detection ability may be limited or it may not work properly.

• Glasses or sunglasses could reflect sunlight or surroundings, which can prevent the MVT-9 from detecting eyes and will lower its performance accuracy.

• Any object that covers the driver’s face, such as an eyepatch, hat, cap, mask, or muffler, could affect performance.

• Dirt, a scratch, or a fingerprint on the camera can affect recognition performance. Do not touch this part with bare hands or anything sharp. If there is dirt or a fingerprint, wipe it gently with a soft, dry cloth.

• The MVT-9 is designed to operate on paved roads with clearly marked lanes. It cannot recognize the road better than the driver. It is the driver’s responsibility to be alert and aware at all times.

• The MVT-9 detects visible vehicles ahead. Crossing, oncoming, and passing vehicles cannot be detected. It doesn’t guarantee 100% accuracy in detecting vehicles or driving lanes.

• Inclement weather conditions can adversely affect recognition performance.