FREE ENGLISH MONOPRICE WORKSTREAM 16360 (01) PDF USER GUIDE
FREE ENGLISH MONOPRICE WORKSTREAM 16360 (01) PDF USER MANUAL
FREE ENGLISH MONOPRICE WORKSTREAM 16360 (01) PDF OWNER GUIDE
FREE ENGLISH MONOPRICE WORKSTREAM 16360 (01) PDF OWNER MANUAL
FREE ENGLISH MONOPRICE WORKSTREAM 16360 (01) PDF REFERENCE GUIDE
FREE ENGLISH MONOPRICE WORKSTREAM 16360 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH MONOPRICE WORKSTREAM 16360 (01) PDF REFERENCE MANUAL
FREE ENGLISH MONOPRICE WORKSTREAM 16360 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH MONOPRICE WORKSTREAM 16360 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD MONOPRICE WORKSTREAM 16360 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What safety warnings and guidelines should be followed when using this Multimedia Desktop Stand?
This device is intended for indoor use only.
This device contains small parts and components which pose a choking hazard to children and animals. Keep these parts away from children and pets.
Do not use power tools to assemble this unit.
Do not over-tighten the fixings or screws.
This device contains glass parts. Do not subject the glass parts to sudden shock, knocks or quick changes in temperature. The unit may fracture and will form small, sharp shards. Take extreme care when handling broken glass.
Do not exceed the maximum stated load capacity of 66 lbs. (30kg). Placing weights heavier than recommended may result in damage or serious injury.
To ensure continued safety, check that the unit is secure and safe to use at regular intervals (every 3 months). Take appropriate action to rectify any unstable or unsafe parts.
Check the contents of the packaging against those specified in this manual to ensure there are no missing or defective parts. Never use defective parts.
Install only as instructed within this manual. Any deviation or shortcut may lead to improper assembly. Improper assembly may cause damage or serious injury.
Ensure that the surface this will be place upon will safely support the combined weight of this stand and any objects placed on it.
What items are included in the package for the Multimedia Desktop Stand?
1x Glass Shelf (A)
4x Set Screws (B)
4x Legs (C)
4x Feet (D)
What should I do if any items are missing or damaged from the package?
If anything is missing or damaged, please contact Monoprice Customer Service for a replacement.
How do I assemble the Multimedia Desktop Stand?
1. Place a towel or blanket on a table or on the floor. Carefully place the Glass Shelf (A) upside down on the towel/blanket.
2. Insert one of the Set Screws (B) into the threaded hole on one of the corners and tighten it by hand. Repeat with the other three Set Screws.
3. Position one of the Legs (C) over one of the Set Screws (B) and tighten by hand. Repeat with the other three Legs.
4. Insert one of the Feet (D) into one of the Legs (C) and tighten by hand. Repeat with the other three Feet. Note that the feet can be loosened or tightened to level the stand.
5. Remove the stand from the towel/blanket and place it on its Feet in the desired location.
CLICK HERE TO DOWNLOAD MONOPRICE WORKSTREAM 16360 (01) PDF MANUAL