Post questions, comments, reviews or errors in the comment box below.
Your File is Ready … Download PDF
PDF Content Summary: GilmourTM Technical Specification Pivoting Paper Holder Y6308
Stock Numbers: Materials: Dimensions: Y63008BN – Pivoting Paper Holder Brushed Nickel Finish 2-1/4" (58mm) Dia. 2-1/4" (58mm) 3-3/8" (86mm) 6-11/16" (169mm) Installation Instructions: Paper Holder is constructed of zinc. 1. Position the mounting template on the wall in the desired location. Using a level, align the template and tape it to the wall. 2. Remove each mounting post from the body by loosening the set screw. 3. Place each mounting post on the template with notch facing down. 4. Mark the 2 large hole locations of each mounting bracket. 5. Attach each mounting bracket to the wall, using the wall anchors provided. 6. Mount each base on the corresponding mounting bracket. Check and make sure that the base set screw hole(s) are facing down. Assemble a set screw to each base. Use the allen wrench included in hardware kit to tighten each set screw and secure the assembly to the mounting bracket(s). 7. Tighten all 4 screws. Do not over tighten. 8. Place each post over the mounting plate (set screw down). Pivoting post with
bar to be on left side. Tighten both set screws. Cleaning Instructions: To preserve the fine finish of this product, clean only with a soft damp cloth. Dry well. Do not use commercial or abrasive cleaners. Stock Number: ____________________Paper Holder By Moen Incorporated 25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070 CORPORATE HEADQUARTERS: (800) 321-8809 • FAX: (800) 848-6636 INTERNATIONAL: (440 ) 962-2000 • FAX: (440) 962-2726 CUSTOMER SERVICE (USA): 800-882-0116 • FAX: (888) 379-2720 MOEN.COM © 2019 Moen Incorporated. Moen is a registered trademark and Gilmour is a trademark of Moen Incorporated. All rights reserved.
FREE ENGLISH PDF
USER GUIDE - USER MANUAL
OWNER GUIDE - OWNER MANUAL
REFERENCE GUIDE - REFERENCE MANUAL
INSTRUCTION GUIDE - INSTRUCTION MANUAL