MOEN 104466 (01) PDF MANUAL

MOEN 104466 (01) PDF SUMMARY:

What helpful tools does Moen recommend for faucet replacement?

Moen recommends the use of helpful tools for safety and ease of faucet replacement.

---

What should I do if I need installation help or missing/replacement parts?

Contact Moen first for installation help or missing/replacement parts by calling 1-800-BUY-MOEN (1-800-289-6636) or visiting WWW.MOEN.COM.

---

What is the first thing that I should do before I start the installation?

Record the purchased model number and save the instruction sheet for future reference.

---

What should the installer be sure of before installation?

The installer should be sure that the proper device has been selected for the proper installation.

---

What can a faulty installation cause?

A faulty installation can cause scalding, severe injury, or death.

---

What is required of all plumbing system components?

Annual inspection and maintenance is required of all plumbing system components.

---

What should be done to ensure proper performance and maximum life of the product?

This product must be subject to regular inspection, testing, and cleaning to ensure proper performance and maximum life.

---

What water temperatures are dangerous and will cause scalding?

Water temperatures in excess of 122°F (50°C) are dangerous and will cause scalding.

---

What are the parts of the Thermostatic Mixing Valve?

The parts of the Thermostatic Mixing Valve are: Adjustment Cap, Valve Body, Fitting, Screen Washer, Nut, Seal Washer, and Mounting Tab.

---

How can you secure the valve for easier installation?

To secure the valve for easier installation, insert screws through mounting tabs and mount to a 2×4 or other available surface.

---

What should you do with the C4 fittings prior to assembly?

Solder the C4 fittings prior to assembly.

---

What is the minimum flow rate of the Thermostatic Mixing Valve?

The minimum flow rate of the Thermostatic Mixing Valve is 1.0gpm (3.8L/min).

---

What should you do if the mixed water temperature is over 120˚F (49˚C)?

If the temperature is over 120˚F (49˚C), proceed to step 6.

---

What should you do if the mixed water temperature is less than 120˚F (49˚C)?

If the temperature is less than 120˚F (49˚C), the installation is complete.

---

How do you adjust the water temperature?

To adjust the temperature, align the triangle on top of the Adjustment Cap with the triangle on top of the Valve Body. Twist counterclockwise for hot or clockwise for cold.

---

What does the Moen warranty cover for homeowners?

Moen warrants to the original consumer purchaser for as long as the original consumer purchaser owns their home, that the faucet will be leak- and drip-free during normal use and all parts and finishes will be free from defects in material and manufacturing workmanship.

---

What does the Moen warranty cover for purchasers that are not homeowners?

All other purchasers are warranted for a period of 5 years from the original date of purchase.

---

What will Moen do if the faucet develops a leak or drip during the warranty period?

Moen will provide the parts necessary to put the faucet back in good working condition and will replace any part or finish that proves to be defective in material and manufacturing workmanship, under normal installation, use and service, free of charge.

---

How do I obtain replacement parts under the warranty?

Replacement parts may be obtained by calling 1-800-289-6636 (Canada 1-800-465-6130), or by writing to the address shown.

---

What must accompany all warranty claims?

Proof of purchase (original sales receipt) from the original consumer purchaser must accompany all warranty claims.

---

What is not covered by the warranty?

Defects or damage caused by the use of other than genuine Moen parts is not covered by this warranty.

---

When is the warranty applicable?

This warranty is applicable only to faucets purchased after December, 1995 and is effective as of the date of the original purchaser’s receipt.

---

What kind of damages are excluded from the warranty? Damages caused by installation error, product abuse, product misuse, or use of cleaners containing abrasives, alcohol or other organic solvents, whether performed by a contractor, service company, or yourself, are excluded from this warranty.

---

Is Moen responsible for labor charges or any other damages?

Moen will not be responsible for labor charges and/or damage incurred in installation, repair or replacement, nor for any indirect, incidental or consequential damages, losses, injury or costs of any nature relating to this faucet.

---

What does this warranty replace? Except as provided by law, this warranty is in lieu of and excludes all other warranties, conditions and guarantees, whether expressed or implied, statutory or otherwise, including without restriction those of merchantability or fitness.

---

What should you include when making a warranty claim?

Explain the defect and include proof of purchase and your name, address, area code and telephone number.