Free English MIDEA E1031NX-Y (01) PDF Document. Free English MIDEA E1031NX-Y (01) PDF User Guide. Free English MIDEA E1031NX-Y (01) PDF User Manual. Free English MIDEA E1031NX-Y (01) PDF Owner Guide. Free English MIDEA E1031NX-Y (01) PDF Owner Manual. Free English MIDEA E1031NX-Y (01) PDF Reference Guide. Free English MIDEA E1031NX-Y (01) PDF Instruction Guide. Free English MIDEA E1031NX-Y (01) PDF Reference Manual. Free English MIDEA E1031NX-Y (01) PDF Instruction Manual. Free English MIDEA E1031NX-Y (01) PDF Operating Instructions.
CLICK HERE TO DOWNLOAD MIDEA E1031NX-Y (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the specifications for the MIDEA E1031NX-Y microwave oven?
| Model: | E1031NX-Y |
| Power Source: | 120V~ 60Hz |
| Power Consumption: | 1450 W |
| Maximum Output: | 1000W |
| Oven Capacity: | 1.1Cu.ft. |
| Turntable Diameter: | Ø 12.4 inches |
| External Dimensions (LxWxH): | 20.5X17.5X13.2 inches |
| Net weight: | Approx. 34.4 LB |
What precautions should I take to avoid exposure to excessive microwave energy from my MIDEA E1031NX-Y?
(a) Do not attempt to operate this oven with the door open since this can result in harmful exposure to microwave energy. It is important not to break or tamper with the safety interlocks.
(b) Do not place any object between the oven front face and the door or allow soil or cleaner residue to accumulate on sealing surfaces.
(c) Do not operate the oven if it is damaged. It is particularly important that the oven door closes properly and that there is no damage to the:
(1) DOOR (dent)
(2) HINGES AND LATCHES (broken or loosened)
(3) DOOR SEALS AND SEALING SURFACE
(d) The oven should not be adjusted or repaired by anyone except properly qualified service personnel.
What are the general safety instructions for using the MIDEA E1031NX-Y microwave oven?
1. The oven must be on a leveled surface.
2. The turntable and turntable roller rest must be in the oven during cooking. Place the cookware gently on the turntable and handle it carefully to avoid possible breakage.
3. Incorrect use of browning dish may cause the turntable to break.
4. Use only the specified bag size when using Direct Access Popcorn.
5. The oven has several built-in safety switches to ensure that the power remains off when the door is open. Do not tamper with these switches.
6. Do not operate the microwave oven empty. Operating the oven with no food or food that is extremely low in moisture can cause fire, charring or sparking.
7. Do not cook bacon directly on the turntable. Excessive local heating of the turntable may cause the turntable to break.
8. Do not heat baby bottles or baby food in the microwave oven. Uneven heating may occur and could cause physical injury.
9. Do not heat narrow-necked containers, such as syrup bottles.
10. Do not attempt to deep-fry in your microwave oven.
11. Do not attempt home canning in this microwave oven as it is impossible to be sure all contents of the jar have reached boiling temperature.
12. Do not use this microwave oven for commercial purpose. This microwave oven is made for household use only.
13. To prevent delayed eruptive boiling of hot liquids and beverages or scalding yourself, stir liquid before placing the container in the oven and again halfway through cooking time. Let stand in the oven for a short time and stir again before removing the container.
14. Please do notice the food in the microwave oven to avoid burning due to excessive cooking when cooking food in it.
15. When the appliance is operated in the combination mode, children should only use the oven under adult supervision due to the temperatures generated.
16. Failure to maintain the oven in a clean condition could lead to deterioration of the surface that could adversely affect the life of the appliance and possibly result in a hazardous situation.
What should I do if materials inside my MIDEA E1031NX-Y microwave oven ignite?
If materials inside the oven ignite:
1. Keep the oven door closed.
2. Turn the oven off, and unplug the appliance.
3. Disconnect the power at the fuse or circuit breaker panel.
What are the grounding instructions for the MIDEA E1031NX-Y microwave oven?
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.
Consult a qualified electrician or serviceman if the grounding instructions are not completely understood or if doubt exists as to whether the appliance is properly grounded. If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-pronged grounding plug, and a 3-slot receptacle that will accept the plug on the appliance.
1. A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.
2. If a long cord set or extension cord is used:
1) The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance.
2) The extension cord must be a grounding-type 3-wire cord.
3) The longer cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over unintentionally.
How can I test if a utensil is safe to use in my MIDEA E1031NX-Y microwave?
There may be certain non-metallic utensils that are not safe to use for microwaving. If in doubt, you can test the utensil in question following the procedure below.
Utensil Test:
1. Fill a microwave-safe container with 1 cup of cold water (250ml) along with the utensil in question.
2. Cook on maximum power for 1 minute.
3. Carefully feel the utensil. If the empty utensil is warm, do not use it for microwave cooking.
4. Do not exceed 1 minute cooking time.
What materials can I use in the MIDEA E1031NX-Y microwave oven?
| Utensils | Remarks |
| Aluminum foil | Shielding only. Small smooth pieces can be used to cover thin parts of meat or poultry to prevent overcooking. Arcing can occur if foil is too close to oven walls. The foil should be at least 1 inch (2.5cm) away from oven walls. |
| Browning dish | Follow manufacturer’s instructions. The bottom of browning dish must be at least 3/16 inch (5mm) above the turntable. Incorrect usage may cause the turntable to break. |
| Dinnerware | Microwave-safe only. Follow manufacturer’s instructions. Do not use cracked or chipped dishes. |
| Glass jars | Always remove lid. Use only to heat food until just warm. Most glass jars are not heat resistant and may break. |
| Glassware | Heat-resistant oven glassware only. Make sure there is no metallic trim. Do not use cracked or chipped dishes. |
| Oven cooking bags | Follow manufacturer’s instructions. Do not close with metal tie. Make slits to allow steam to escape. |
| Paper plates and cups | Use for short-term cooking/warming only. Do not leave oven unattended while cooking. |
| Paper towels | Use to cover food for reheating and absorbing fat. Use with supervision for a short-term cooking only. |
| Parchment paper | Use as a cover to prevent splattering or a wrap for steaming. |
| Plastic | Microwave-safe only. Follow the manufacturer’s instructions. Should be labelled “Microwave Safe”. Some plastic containers soften as the food inside gets hot. “Boiling bags” and tightly closed plastic bags should be slit, pierced or vented as directed by package. |
| Plastic wrap | Microwave-safe only. Use to cover food during cooking to retain moisture. Do not allow plastic wrap to touch food. |
| Thermometers | Microwave-safe only (meat and candy thermometers). |
| Wax paper | Use as a cover to prevent splattering and retain moisture. |
What materials should be avoided in the MIDEA E1031NX-Y microwave oven?
| Utensils | Remarks |
| Aluminum tray | May cause arcing. Transfer food into microwave-safe dish. |
| Food carton with metal handle | May cause arcing. Transfer food into microwave-safe dish. |
| Metal or metal-trimmed utensils | Metal shields the food from microwave energy. Metal trim may cause arcing. |
| Metal twist ties | May cause arcing and could cause a fire in the oven. |
| Paper bags | May cause a fire in the oven. |
| Plastic foam | Plastic foam may melt or contaminate the liquid inside when exposed to high temperature. |
| Wood | Wood will dry out when used in the microwave oven and may split or crack. |
What are the parts and accessories of the MIDEA E1031NX-Y microwave oven?
Your oven comes with the following accessories:
Glass tray (1)
Turntable ring assembly (1)
Instruction Manual (1)
Names of Oven Parts:
A) Control panel
B) Turntable shaft
C) Turntable ring assembly
D) Glass tray
E) Observation window
F) Door assembly
G) Safety interlock system (Shuts off oven power if door is opened during operation)
How do I properly install the turntable in my MIDEA E1031NX-Y microwave?
a. Never place the glass tray upside down. The glass tray should never be restricted.
b. Both glass tray and turntable ring assembly must always be used during cooking.
c. All food and containers of food are always placed on the glass tray for cooking.
d. The glass tray rotates clockwise; this is normal.
e. If the glass tray or turntable ring assembly cracks or breaks, contact your nearest authorized service center.
What are the installation requirements for the MIDEA E1031NX-Y microwave oven?
1. Select a level surface that provides enough open space for the intake and/or outlet vents.
2. A minimum clearance of 3.0 inches (7.5cm) is required between the oven and any adjacent wall. One side must be open.
3. Leave a minimum clearance of 12 inches (30cm) above the oven.
4. Do not remove the legs from the bottom of the oven.
5. Blocking the intake and/or outlet openings can damage the oven.
6. Place the oven as far away from radios and TV as possible. Operation of the microwave oven may cause interference to your radio or TV reception.
7. Plug your oven into a standard household outlet. Be sure the voltage and the frequency is the same as the voltage and the frequency on the rating label.
WARNING: Do not install the oven over a range cooktop or other heat-producing appliance. If installed, it could be damaged and the warranty would be void.
Also, do not remove the light brown Mica cover that is screwed to the oven cavity to protect the magnetron.
How do I set the clock on the MIDEA E1031NX-Y microwave oven?
When the microwave oven is plugged into an outlet, the oven will display “0:00”.
(1) Press “CLOCK/PRE-SET”. The LCD will display 00:00, and the clock indicator will be lighted. The hour figures will flash.
(2) Press the numerical pads to input the hour, then the minutes.
(3) Press “AM/PM” to choose AM or PM. “A” or “P” will be displayed.
(4) Press “CLOCK/PRE-SET” to finish the clock setting. The “:” will be flashing and the clock will be lighted.
(5) If the numbers input are not within the range of 1:00–12:59, the setting will be invalid until valid numbers are input.
Note: In the process of clock setting, if the “Stop” button is pressed or if there is no operation within 1 minute, the oven will go back to the former setting automatically.
How do I perform a basic microwave cooking operation on the MIDEA E1031NX-Y?
(1) Keep on pressing “POWER” to choose a microwave power level. The indicators for “MICRO” and “POWER” will be lighted together. There are 10 power levels available, from 10% to 100%.
(2) Press numerical pads to input the cooking time; the maximum cooking time is 99 minutes and 99 seconds.
(3) Press “START” to start cooking. The remaining cooking time will be displayed, and the indicators for “MICRO” and “POWER” will be flashing.
How do I set up a two-stage cooking program on the MIDEA E1031NX-Y?
(1) Keep on pressing “POWER” to choose the power level for the first cooking stage.
(2) Press numerical pads to input the time for the first cooking. The maximum cooking time is 99 minutes and 99 seconds.
(3) Keep on pressing “POWER” to choose the power level for the second cooking stage.
(4) Press numerical pads to input the second cooking time. The maximum cooking time is 99 minutes and 99 seconds.
(5) Press “START” to start cooking. The indicators for “MICRO” and “POWER” will be flashing.
(6) One “beep” will sound when the first cooking stage ends, and then the second cooking stage will begin.
How do I use the fast starting feature on the MIDEA E1031NX-Y microwave?
(1) In the waiting state, instant cooking at 100% power level can be started by selecting a cooking time from one to five minutes by pressing the corresponding numerical pad. Press “+30SEC” to increase the cooking time; the maximum cooking time is 99 minutes and 99 seconds.
(2) In the waiting state, instant cooking at 100% power level with 30 seconds’ cooking time can be started by pressing “+30SEC”. Each press on the same button will increase cooking time by 30 seconds. The maximum cooking time is 99 minutes and 99 seconds.
Note: Each press on “+30SEC” can increase the cooking by 30 seconds for the micro and Auto menu cooking. However, the operation will not work under “Auto Defrost” operation.
How do I use the Defrost by Weight function on the MIDEA E1031NX-Y?
(1) Press “Defrosting WT”. The LCD will display “dEF1”.
(2) Press numerical pads to input the weight to be defrosted. The “Oz” indicator will be lighted. Input the weight ranged between 4~100oz.
(3) If the weight input is not within 4~100, the input will be invalid. No “beep” will be sound and the microwave will not work until valid numbers are input.
(4) Press “START” to start defrosting. The remained cooking time will be displayed, and indicators for “MICRO” and “DEFROSTING” will be flashing.
How do I use the Defrost by Time function on the MIDEA E1031NX-Y?
(1) Press “Defrosting By Time”. The LCD will display “dEF2”.
(2) Press numerical pads to input defrosting time. The effective time range is 00:01~99:99.
(3) If the time input is not within 00:01~99:99, the oven will not work until valid numbers are input.
(4) The default microwave power is power level 3. If you want to change the power level, press “POWER” once, and the LCD will display “PL 3”, then press the numerical pad of the power level wanted.
(5) Press “START” to start defrosting. The remaining cooking time will be displayed.
How do I use the Memory Function on my MIDEA E1031NX-Y microwave?
(1) Press “MEMORY” one to five times to choose memory 1 to memory 5. “1” to “5” will be displayed.
(2) Set a cooking program, and press “START” to start the cooking or press “MEMORY” to save the setting. A two-stage power cooking program can also be set the same way. When “MEMORY” is pressed the oven will turn back to the waiting state.
The set program saved will be operated at once by pressing “START”.
How do I use the Pre-set (Delayed Start) function on the MIDEA E1031NX-Y?
Note: The clock must be set before using the pre-set cooking function.
(1) Set a cooking program as desired.
(2) Press “CLOCK/PRE-SET” to display the current clock. The “clock” indicator will be lighted and the hour indicator will be flashing.
(3) Press the numerical pads to input the desired start time (hour).
(4) Press the numerical pads to input the desired start time (minutes).
(5) Press “START” to confirm the pre-set cooking. The oven will then turn back to the clock displaying state, and the clock indicator and “:” will be flashing.
(6) When the pre-set time is reached, two “beeps” will sound, indicating the beginning of the cooking.
How do I check the power level or time during operation on my MIDEA E1031NX-Y?
(1) In clock state, press “AM/PM” to display “A” or “P” for 3 seconds.
(2) In cooking state, press “CLOCK”. The LCD will display the clock for three seconds and “A” or “P” will be displayed for another 3 seconds.
(3) In a pre-set state, press “CLOCK” to inquire the pre-set time. The pre-set time will be flashing for 3 seconds.
(4) In a one-power cooking state, press “POWER” to inquire about the microwave power level. The current microwave power will be displayed. After three seconds, the oven will turn back to the previous state.
(5) In a two-stage power cooking state, the inquiring process is the same as above.
How do I activate and deactivate the child lock on the MIDEA E1031NX-Y microwave oven?
Lock: In waiting state, press “STOP” for 3 seconds. There will be a long “beep” denoting entering into the children lock-out state and the LCD will display a lock icon.
Unlock: In a locked state, press “STOP” for 3 seconds. There will be a long “beep” denoting that the lock is released.
What is the “Fan Pro-longed Protection Function” on the MIDEA E1031NX-Y?
If the cooking time is equal to or above 5 minutes, for the last 15 seconds, the microwave cooking will be stopped automatically, and only the fan will still be running.
Why does my MIDEA E1031NX-Y interfere with my TV or radio reception?
Radio and TV reception may be interfered with when the microwave oven is in operation. It is similar to the interference of small electrical appliances, like a mixer, vacuum cleaner, and electric fan. This is normal.
Why is the oven light dim in my MIDEA E1031NX-Y microwave?
In low power microwave cooking, the oven light may become dim. This is normal.
Why is there steam accumulating on the door of my MIDEA E1031NX-Y?
In cooking, steam may come out of food. Most will come out from vents. But some may accumulate on a cool place like the oven door. This is normal.
What should I do if my MIDEA E1031NX-Y microwave will not start?
| Possible Cause | Remedy |
| (1) Power cord not plugged in tightly. | Unplug. Then plug again after 10 seconds. |
| (2) Fuse blowing or circuit breaker works. | Replace fuse or reset circuit breaker (repaired by professional personnel of our company). |
| (3) Trouble with outlet. | Test outlet with other electrical appliances. |
What should I do if my MIDEA E1031NX-Y microwave does not heat?
This may be because the door is not closed well. Close the door well and try again.
Why does the glass turntable make noise when my MIDEA E1031NX-Y microwave operates?
This may be caused by a dirty roller rest and oven bottom. Refer to “Maintenance of Microwave” to clean dirty parts.
What should I do if my MIDEA E1031NX-Y is causing radio or television interference?
If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following:
Reorient the receiving antenna of radio or television.
Relocate the Microwave oven with respect to the receiver.
Move the microwave oven away from the receiver.
Plug the microwave oven into a different outlet so that the microwave oven and receiver are on different branch circuits.
CLICK HERE TO DOWNLOAD MIDEA E1031NX-Y (01) PDF DOCUMENT
