Free English MEDTRONIC WR9230 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD MEDTRONIC WR9230 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I charge the MEDTRONIC WR9230 recharger?
To charge your MEDTRONIC WR9230 recharger, follow these steps:
1. Connect the USB cable to the dock.
2. Plug the USB cable into the power adapter and plug the adapter into a wall outlet. The dock must rest on a flat surface while plugged in.
3. Place the recharger, button-side up, into the dock. Leave your recharger on the dock between recharging sessions to maintain full charge.
Note: Before using the recharger for the first time, you must place it in the dock. Charging the recharger battery to full is ideal.
4. When your recharger is fully charged, the battery icon will display as full.
How do I pair the MEDTRONIC WR9230 recharger with the app?
Note: Before you begin your first recharging session, the recharger must be paired to the recharger app. Use of the recharger app is optional after the initial pairing.
1. Turn on and unlock your handset.
2. Open the recharger app by tapping the app icon.
3. Turn on your recharger.
4. In the recharger app, tap Connect.
5. Tap Scan Code. Note: Tap “Allow” on the pop-up requesting access to the camera, if it occurs.
6. Aim the handset camera at the scannable code on the blue side of the recharger, keeping the entire code visible on the handset screen. When pairing is complete, the app will begin connecting to the recharger.
How do I charge my implant using the MEDTRONIC WR9230?
1. Check the battery level of the recharger and charge your recharger if necessary.
2. Place the recharger into your drape or belt. Position the two concentric circles on the drape and recharger over your neurostimulator site. Note: Use the counterweight when using the drape to balance the recharger.
3. Turn on the recharger by giving the power button a short press. The recharger will beep repeatedly until it connects to your neurostimulator.
4. Adjust the position of the recharger as needed until you hear two tones rising in pitch. These tones mean that your neurostimulator has been found and will start to recharge.
What do the indicator tones and lights mean on the MEDTRONIC WR9230?
| Tone | Light | Meaning |
|---|---|---|
| Repeating beeping tone | Spinning | Recharger is searching for the neurostimulator. |
| 2 tones, rising in pitch | Solid | Neurostimulator has been found. |
| None | Slow pulsing | Recharging neurostimulator. |
| A series of tones, rising in pitch | Solid | Recharging session is complete. |
| 2 tones, falling in pitch and repeating | Flashing | Alert/error. Check the recharger kit patient user guide and the recharger app for more information. |
| 2 tones, falling in pitch | Solid briefly, then off | Your new recharger did not pair to the recharger app. Check the recharger kit patient user guide and recharger app for more information. |
| 2 tones, falling in pitch and repeating | Flashing | Recharger battery is low. |
How do I use the optional recharger app for the MEDTRONIC WR9230?
Use of the recharger app is optional after an initial pairing between the recharger app and the MEDTRONIC WR9230 wireless recharger has been performed. The app features the following controls and indicators:
1. Menu button: Tap to access charging speed settings and app information. The recharger defaults to fastest speed.
2. Neurostimulator battery icon: The number next to this image indicates how full the neurostimulator battery is.
3. Connection icon: Indicates your connection status between your recharger and your neurostimulator.
4. Recharger button: Tap to view the recharger battery status and change the volume of your recharger.
CLICK HERE TO DOWNLOAD MEDTRONIC WR9230 (01) PDF DOCUMENT