Free English KOGAN KAROUTWF7MA (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD KOGAN KAROUTWF7MA (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the default login and network details for the KOGAN KAROUTWF7MA?
The router information is as follows:
2.4G SSID: KAROUTWF7MA-2.4GHz
5G SSID: KAROUTWF7MA-5GHz
Default IP: 192.168.10.1
Login URL: netlogin.link
What components are included with the KOGAN KAROUTWF7MA?
The components included are:
Router
Power Adaptor
RJ45 Ethernet Cable
User Guide
What ports and buttons are available on the KOGAN KAROUTWF7MA?
The device features the following interfaces:
1. 2.4G Antenna
2. 5G Antenna (x3)
3. Gigabit LAN Port (x3)
4. Gigabit WAN Port
5. Pair/Reset Button
6. Power Input Port
What do the indicator lights signify on the KOGAN KAROUTWF7MA?
| Mode | Indicator Status | Description |
|---|---|---|
| Router Mode | Solid on | Internet is connected |
| Router Mode | Fast blinking | No Internet connected |
| Router Mode | Slow blinking | In pairing |
| Repeater Mode | Solid on | The Internet connected |
| Repeater Mode | Slow blinking | Parent router connected but the Internet disconnected |
| Repeater Mode | Fast blinking | Parent router disconnected |
| AP Mode | Solid on | The Internet connected |
| AP Mode | Fast blinking | No Internet connected |
| AP Mode | Slow blinking | In pairing |
How do I use the Reset/Pair button on the KOGAN KAROUTWF7MA?
Press the RESET/PAIR button for more than 6 seconds then the light is solid on to reset.
Press the RESET/PAIR button for 2s, the LED will be slow blinking to enter pairing mode.
How do I install and connect the KOGAN KAROUTWF7MA to a modem?
1. Disconnect the power adapter from your existing DSL modem. If the modem has a backup battery, remove it.
2. Use the provided RJ45 Ethernet cable to connect the modem to the WAN port of the router.
3. Reconnect the modem back to the electrical outlet and turn it on. Check the modem indicators to ensure the internet connection is stable.
4. Insert the power adapter into the router’s power input port and connect the other end into an electrical outlet. If a power switch is present on the router, place it in the ‘on’ position.
5. Wait for approximately 2-3 minutes. The router is ready for configuration.
Note: If using a DSL Internet connection, obtain the login credentials (username/password) from your Internet Service Provider (ISP) to properly configure your wireless router.
How do I configure the KOGAN KAROUTWF7MA using a wired connection?
Use an Ethernet cable (not supplied) to directly connect your computer to one of the LAN ports on the rear of the router.
Open a web browser and enter netlogin.link in the address bar.
You will be directed to the router’s initial setup page. If not, manually enter 192.168.10.1 in the browser’s address bar and follow the instructions.
How do I configure the KOGAN KAROUTWF7MA using a wireless connection?
1. On your laptop or smartphone, connect to the default SSID printed on the router ‘KAROUTWF7MA-XXXX’.
2. Open a web browser (via wired or wireless connection) and enter netlogin.link in the address bar.
3. You will be directed to the router’s initial setup page. If not, manually enter 192.168.10.1 in the browser’s address bar and follow the instructions.
How do I set up Repeater Mode on the KOGAN KAROUTWF7MA?
1. If you want to change the router mode into repeater mode to get a larger Wi-Fi coverage, place the router in the range of the existing Wi-Fi network.
2. Open a web browser (via wired or wireless connection) and enter netlogin.link in the address bar.
3. Click More > Network > Mode Selection, choose Repeater Mode from the Mode Selection list. Then click NEXT.
4. Select the Wi-Fi signal of the host router and click NEXT, if you didn’t find the signal, click RESCAN. If the SSID (network name) is hidden, follow the guide of Manual input (Step 6).
5. Follow the wizard to set the network information of the host router and this product.
6. If the SSID (network name) of the host router is hidden, please try to select Manual input and enter the SSID of the host router manually.
7. After setting the wireless information of the device, click SAVE.
Note: In repeater mode, the router will build a wireless connection with the upstream router to help you get a larger Wi-Fi coverage, and the device will be switched to AP Mode after initial setup.
How do I set up AP Mode on the KOGAN KAROUTWF7MA?
1. If you want to change the router mode into AP mode, connect this device’s WAN port to the host router’s LAN port.
2. Open a web browser (via wired or wireless connection) and enter netlogin.link in the address bar.
3. Click More > Network > Mode Selection, choose LAN Bridge (AP Mode) from the Mode Selection list. Then click SAVE.
Note: The device should be switched to AP Mode after initial setup.
What is the Smart DHCP Server feature on the KOGAN KAROUTWF7MA?
By turning on Smart DHCP Server, the router will automatically configure the IP service when no higher-level device is connected. If you do not need automatic IP configuration, you can turn it off.
Why doesn’t the login page appear after entering netlogin.link on the KOGAN KAROUTWF7MA?
Ensure your computer is set to obtain an IP address automatically.
Confirm that netlogin.link has been correctly entered in the web browser.
Try using a different web browser.
Reboot your router and try again.
What can I do if I cannot access the Internet using the KOGAN KAROUTWF7MA?
Restart your modem and wait for 5 minutes. Disconnect any extra Ethernet connections.
Test the connection by connecting a computer directly to the modem. If issues persist, contact your Internet Service Provider (ISP).
Check the router’s web management page:
On the Home page, confirm whether the Internet IP address is valid.
If valid, go to More > Network > Internet > Custom DNS and set DNS1 to 8.8.8.8 and DNS2 to 8.8.4.4.
If invalid, check the hardware connection or contact your ISP.
If using a cable modem, go to More > Network > Internet > MAC Clone > Custom MAC, enter the MAC address of the device that previously accessed the Internet, then reboot both the modem and the router.
How do I restore the KOGAN KAROUTWF7MA to its factory default settings?
While the router is powered on, press and hold the RESET button on the back of the device for more than 6 seconds.
What do I do if I forget my Administration Management password for the KOGAN KAROUTWF7MA?
Reset the router to factory default settings.
What if I forget my wireless network password on the KOGAN KAROUTWF7MA?
Connect your PC to the router using an Ethernet cable.
Open a web browser and go to netlogin.link
Navigate to the Wireless settings to view your Wi-Fi password.
If you cannot retrieve it, Reset the router to factory default settings.
CLICK HERE TO DOWNLOAD KOGAN KAROUTWF7MA (01) PDF DOCUMENT