MARTA MT-1494 (01) PDF Document

The MARTA MT-1494 hair dryer consists of the following parts:

1. Concentrator

2. Housing

3. Air inlet

4. Handle

5. Speed control switch

6. Temperature control switch

7. Hanging loop

Please follow these safety precautions when using your MARTA MT-1494 hair dryer:

• Before first use, check the appliance specification and power supply in your network.

• The appliance is intended for indoor, domestic use only, not for industrial purposes.

• Do not use with a damaged cord, plug, or other injury.

• Keep the power cord away from sharp edges and hot surfaces.

• Do not pull the cord. Always take the plug. Do not reel the cord around the appliance housing.

• Never attempt to repair the appliance by yourself. If you encounter problems, please contact a customer service center.

• Using accessories or replacement parts not recommended or sold by the manufacturer may cause damage.

• Always unplug the appliance and let it cool down before cleaning and removing parts. Keep it unplugged when not in use.

• To avoid electric shock and fire, do not immerse the appliance in water or other liquids. If this occurs, immediately unplug the appliance and contact a service center for inspection.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

• Do not use the appliance in a bathroom or near a water source to avoid electric shock.

• While the appliance is operating, be careful with the concentrator as it can get hot. Do not touch it.

If the MARTA MT-1494 hair dryer overheats, it will switch off automatically. If this happens, follow these steps:

1. Set the switch into position 0 (off).

2. Unplug the appliance from the power source.

3. Wait until the appliance has completely cooled down.

4. Before using it again, make sure that there are no hair, dust, or other objects in the air inlets, as blocked air inlets can cause overheating.

To begin using your MARTA MT-1494 hair dryer, follow these steps:

1. Unwind the power cord completely.

2. Set the concentrator on the hair dryer.

3. Plug the appliance in.

The MARTA MT-1494 hair dryer is equipped with a speed control switch to adjust the power of the airflow. The settings are as follows:

• 0 – off

• | – medium airflow power for soft drying and styling

• || – high airflow power for fast drying

The MARTA MT-1494 hair dryer is equipped with a temperature control switch with the following positions:

• 0 – cool airflow

• | – warm airflow

• || – hot airflow

The concentrator attachment for the MARTA MT-1494 hair dryer is used for creating a focused airflow. This allows you to dry and style each lock of hair individually.

To clean your MARTA MT-1494 hair dryer, follow these steps:

1. Unplug the appliance before cleaning and let it cool down completely.

2. Clean the appliance housing with a wet cloth.

3. Take the concentrator off and rinse it in warm, soapy water.

4. Do not use chemical and abrasive cleaners for cleaning.

5. Wipe the housing and the concentrator with a smooth, dry cloth.

For proper storage of your MARTA MT-1494 hair dryer:

• Let the appliance cool down completely. Ensure there is no water on the appliance surface.

• Do not reel the cord around the appliance housing, as this may cause cord damage.

• Store the appliance in a dry, cool place.