FREE ENGLISH MAKITA DLM461 (01) PDF USER GUIDE
FREE ENGLISH MAKITA DLM461 (01) PDF USER MANUAL
FREE ENGLISH MAKITA DLM461 (01) PDF OWNER GUIDE
FREE ENGLISH MAKITA DLM461 (01) PDF OWNER MANUAL
FREE ENGLISH MAKITA DLM461 (01) PDF REFERENCE GUIDE
FREE ENGLISH MAKITA DLM461 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH MAKITA DLM461 (01) PDF REFERENCE MANUAL
FREE ENGLISH MAKITA DLM461 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH MAKITA DLM461 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD MAKITA DLM461 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
MAKITA DLM461 (01) PDF SUMMARY:
What is the first step to take before using the mower?
Read the instruction manual.
What should you be aware of regarding thrown objects?
Be aware of thrown objects.
What is the minimum safe distance between the tool and bystanders?
The distance between the tool and bystanders must be at least 15 m.
What should you never do with your hands and feet while using the mower?
Never put your hands and feet near the blade under the mower.
What happens to the blades after the motor is switched off?
Blades continue to rotate after the motor is switched off.
When should you remove the lock key?
Remove the lock key before inspecting, adjusting, cleaning, servicing, leaving and storing the mower.
What is the intended use of the tool?
The tool is intended for lawn mowing.
What should you wear to protect your ears when using the mower?
Wear ear protection.
What should you do before using the mower?
Do not insert the lock key into mower until it is ready to be used.
What should children be supervised to ensure?
Children should be supervised to ensure that they do not play with the mower.
Who should never operate the mower?
Never allow children or people unfamiliar with these instructions to use the mower.
When should you never operate the mower?
Never operate the mower while people, especially children, or pets are nearby.
Who is responsible for accidents or hazards occurring to other people or their property?
The operator or user is responsible for accidents or hazards occurring to other people or their property.
What should you always wear while operating the mower?
Always wear substantial footwear and long trousers. Do not operate the mower when barefoot or wearing open sandals. Avoid wearing clothing or jewelry that is loose fitting or that has hanging cords or ties.
What protective gear should you wear to protect your eyes when using power tools?
Always wear protective goggles to protect your eyes from injury when using power tools.
When should you operate the mower?
Operate the mower only in daylight or in good artificial light.
When should you avoid operating the mower?
Avoid operating the mower in wet grass.
What should you do before recharging?
Recharge only with the charger specified by the manufacturer.
What kind of battery cartridges should you use with the mower?
Use power tools only with specifically designated battery cartridges.
What should you do with battery cartridges when not in use?
When battery cartridge is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.
What should you do if liquid from the battery gets in your eyes?
If liquid contacts eyes, additionally seek medical help.
What should you not do with batteries?
Do not dispose of the battery(ies) in a fire. Do not open or mutilate the battery(ies). Do not charge battery in rain, or in wet locations.
What should you always do with the handle while operating the mower?
Always keep a firm hold on the handle.
What should you always be sure of when on slopes?
Always be sure of your footing on slopes.
What should you not do when operating the mower?
Walk, never run.
What should you not grasp when picking up or holding the mower?
Don’t grasp the exposed cutting blades or cutting edges when picking up or holding the mower.
When should you not operate the mower?
Do not operate mower while under the influence of drugs, alcohol, or any medication.
What should you keep away from rotating blades?
Keep hands and feet away from rotating blades.
What should you be aware of regarding blades after the mower is switched off?
Blades coast after the mower is switched off.
What kind of blades should you use?
Use only the manufacturer genuine blades specified in this manual.
What should you check on the blades before operation?
Check the blades or blade bolts carefully for cracks or damage before operation.
What should you do with cracked or damaged blades or blade bolts?
Replace cracked or damaged blades or blade bolts immediately.
What should you ensure the area is clear of before mowing?
Be sure the area is clear of other people before mowing. Clear away any objects such as bottles, bones and large sticks from the work area before mowing.
What should you do if you notice anything unusual while operating the mower?
Stop operation immediately if you notice anything unusual. Switch off the mower and remove the key. Then inspect the mower.
When should you never make cutting height adjustments?
Never attempt to make cutting height adjustments while mower is running if the mower has cutting height adjustment feature.
What should you do before crossing driveways, walks, roads, and any gravel-covered areas?
Release switch lever and wait for blade rotation to stop before crossing driveways, walks, roads, and any gravel-covered areas. Also remove the lock key if you leave the mower, reach to pick up or remove something out of your way, or for any other reason that may distract you from what you are doing.
What should you do before each mowing?
The lawn should always be carefully examined and cleared of all objects prior to each mowing.
What steps should you take if the mower strikes a foreign object?
Stop the mower, release the switch lever and wait until the blade comes to a complete stop. Remove the lock key and the battery cartridge. Thoroughly inspect the mower for any damage. Replace the blade if it is damaged in any way. Repair any damage before restarting and continuing to operate the mower.
What should you check the grass basket for frequently?
Check the grass basket frequently for wear or deterioration.
What should you make sure of when storing the grass basket?
For storage, always make sure the grass basket is empty.
What should you do if the grass basket is worn?
Replace a worn grass basket with a new factory replacement for safety.
When should you use extreme caution?
Use extreme caution when reversing or pulling the mower towards you.
What should you do with the blade(s) if the mower has to be tilted for transportation when crossing surfaces other than grass?
Stop the blade(s) if the mower has to be tilted for transportation when crossing surfaces other than grass, and when transporting the mower to and from the area to be used.
When should you never operate the mower?
Never operate the mower with defective guards or shields, or without safety devices, for example deflectors and/or grass basket, in place.
How should you switch on the mower?
Switch on the mower carefully according to instructions and with feet well away from the blade(s).
When should you not tilt the mower when switching on the motor?
Do not tilt the mower when switching on the motor, except if the mower has to be tilted for starting. In this case, do not tilt it more than absolutely necessary and lift only the part, which is away from the operator.
When should you not start the mower?
Do not start the mower when standing in front of the discharge opening.
What should you keep clear of at all times?
Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.
What should you not do while the mower is turned on?
Do not transport the mower while the mower is turned on.
What should you do when you leave the mower?
Stop the mower, and remove the disabling device. Make sure that all moving parts have come to a complete stop – whenever you leave the mower.
When should you inspect the mower for damage?
Inspect the mower for damage and make repairs before clearing blockages or unclogging chute, before checking, cleaning or working on the mower, and after striking a foreign object.
What should you be careful of during adjustment of the mower?
Be careful during adjustment of the mower to prevent entrapment of the fingers between moving blades and fixed parts of the mower.
How should you mow slopes?
Mow across the face of slopes, never up and down. Exercise extreme caution when changing direction on slopes. Do not mow excessively steep slopes.
What should you check at frequent intervals?
Check the blade mounting bolt at frequent intervals for proper tightness.
What should you keep tight to be sure the equipment is in safe working condition?
Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition.
What should you always allow the mower to do before storing?
Always allow the mower to cool down before storing.
What should you be aware of when servicing the blades?
When servicing the blades be aware that, even though the power source is switched off, the blades can still be moved.
What should you do with worn or damaged parts?
Replace worn or damaged parts for safety.
What kind of replacement parts and accessories should you use?
Use only genuine replacement parts and accessories.
When should you not use the machine?
Do not use the machine when there is a risk of lightning.
What should you pay attention to when using the machine on muddy ground, wet slope, or slippery place?
When you use the machine on muddy ground, wet slope, or slippery place, pay attention to your footing.
When should you avoid working?
Avoid working in poor environment where increased user fatigue is expected.
When should you not use the machine?
Do not use the machine in bad weather where visibility is limited.
When should you not replace the battery?
Do not replace the battery in the rain.
What should you not do with the machine?
Do not submerge the machine into a puddle.
When should you not leave the machine unattended outdoors?
Do not leave the machine unattended outdoors in the rain.
When should you not insert or remove the lock key?
Do not insert or remove the lock key in the rain.
What should you remove when wet leaves or dirt adhere to the suction mouth?
When wet leaves or dirt adhere to the suction mouth (ventilation window) due to rain, remove them.
How should you not wash the machine?
Do not wash the machine with high pressure water.
What should you be sure to do when washing the machine?
When washing the machine, be sure to remove the battery and lock key and close the battery cover, and pour water toward the bottom of the machine to which the blade is attached.
When storing the machine, what should you avoid?
When storing the machine, avoid direct sunlight and rain, and store it in a place where it does not get hot or humid.
Where should you perform inspection or maintenance?
Perform inspection or maintenance in a place where rain can be avoided.
What should you do after using the machine?
After using the machine, remove the adhered dirt and dry the machine completely before storing.
What should you not do with the terminal of the battery?
Do not wet the terminal of battery with liquid such as water, or submerge the battery. Do not leave the battery in the rain, nor charge, use, or store the battery in a damp or wet place.
What should you be sure to attach to the battery and where should you store it after charging?
After charging the battery, be sure to attach the battery cover to the battery and store it in a dry place.
When should you not replace the battery?
Do not replace the battery with wet hands.
When should you not use the machine?
Do not use the machine in the snow.
What is likely to happen if the cut-off grass is wet?
If the cut-off grass is wet, it is likely to be clogged inside of the machine.
What should you do when the cut-off grass is wet?
Check the condition of the machine regularly, and remove the adhered grass as necessary.
What can cause serious personal injury?
Misuse or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
What should you do before using a battery cartridge?
Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.
What should you not do with the battery cartridge?
Do not disassemble battery cartridge.
What should you do if operating time has become excessively shorter?
If operating time has become excessively shorter, stop operating immediately.
What should you do if electrolyte gets into your eyes?
If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away.
What should you not do to the battery cartridge?
Do not short the battery cartridge.
Where should you not store the tool and battery cartridge?
Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50 °C (122 °F).
What should you not do with the battery cartridge?
Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. Be careful not to drop or strike battery. Do not use a damaged battery.
What should you do to open contacts when transporting batteries?
Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging.
How should you dispose of the battery?
Follow your local regulations for the proper disposal of battery.
What products should you use the batteries with?
Use the batteries only with the products specified by Makita.
What should you do with the battery cartridge before it is completely discharged?
Charge the battery cartridge before completely discharged.
When should you stop tool operation and charge the battery cartridge?
Always stop tool operation and charge the battery cartridge when you notice less tool power.
What should you never do with a fully charged battery cartridge?
Never recharge a fully charged battery cartridge.
What is the recommended room temperature for charging the battery cartridge?
Charge the battery cartridge with room temperature at 10 °C – 40 °C (50 °F – 104 °F).
What should you do with a hot battery cartridge before charging it?
Let a hot battery cartridge cool down before charging it.
When should you charge the battery cartridge?
Charge the battery cartridge if you do not use it for a long period (more than six months).
What should you always be sure of before carrying out any work on the mower?
Always be sure that the lock key and battery cartridge are removed before carrying out any work on the mower.
When should you never start the mower?
Never start the mower unless it is completely assembled.
What should you be careful of when installing handles?
When installing handles, position the cords so that they are not caught by anything between the handles.
How should you install the lower handle?
Attach the lower handle so that the holes in the handle fit in the protrusions on the mower body. Insert the bolts from inside, then attach washer A from outside, and then tighten the thumb nuts.
How should you install the upper handle?
Align the hole in the lower handle with the hole in the upper handle, then insert the bolts from inside, then attach washer B from outside, and then tighten the thumb nuts.
What should you do before removing the bolts to adjust handle height?
Hold the upper handle firmly.
How should you attach holder A and holder B to the handle?
Attach holder A and holder B to the handle. Position the cords as shown in the figure.
How do you remove the mulching attachment for DLM460?
Open the rear cover. Remove the mulching attachment while holding down the lever.
How do you remove the mulching attachment for DLM461?
Open the rear cover. Remove the mulching attachment while pulling the lever.
How do you install the grass basket?
Open the rear cover. Hook the grass basket on the rod of the mower body as shown in the figure.
Which direction should the guard on the grass basket face?
Make sure that the guard on the grass basket is facing downward.
How do you attach the mulching attachment for DLM460?
Open the rear cover, and then remove the grass basket. Attach the mulching attachment while holding down the lever, and then release the lever to lock the mulching attachment.
How do you attach the mulching attachment for DLM461?
Open the rear cover, and then remove the grass basket. Attach the mulching attachment while pulling the lever, and then release the lever to lock the mulching attachment.
What should you always do before installing or removing the battery cartridge?
Always switch off the tool before installing or removing of the battery cartridge.
What should you do when installing or removing battery cartridges?
Hold the tool and the battery cartridge firmly when installing or removing battery cartridge.
What should you make sure of before using the mower, regarding the battery cover?
Make sure that you lock the battery cover before use.
How should you install the battery cartridge?
Always install the battery cartridge fully until the red indicator cannot be seen. Do not install the battery cartridge forcibly. Align the tongue on the battery cartridge with the slot on the mower then slide the cartridge until it locks in place with a little click.
What should you do after installing the battery cartridge?
Insert the lock key in the place shown in the figure as far as it will go. Close the battery cover and push it until it is latched with the locking lever.
How do you remove the battery cartridge from the mower?
Pull up the battery cover locking lever and open the battery cover. Pull out the battery cartridge from the mower while sliding the button on the front of the cartridge. Pull out the lock key. Close the battery cover.
What does the tool/battery protection system do?
This system automatically cuts off power to the motor to extend tool and battery life.
What happens when the battery is overloaded?
When the battery is operated in a manner that causes it to draw an abnormally high current, the tool automatically stops and the main power lamp blinks in green.
What should you do if the tool stops due to overload protection?
In this situation, turn the tool off and stop the application that caused the tool to become overloaded. Then turn the tool on again.
What happens when the tool or battery is overheated?
When the tool or battery is overheated, the tool stops automatically and the main power lamp lights up in red.
What should you do if the tool stops due to overheating?
In this case, let the tool and battery cool before turning the tool on again.
What happens when the battery capacity is not enough?
When the battery capacity is not enough, the tool stops automatically and the main power lamp blinks in red.
What should you do if the tool stops due to overdischarge protection?
In this case, remove the battery from the tool and charge the battery cartridges or change the battery cartridges to fully charged ones.
How do you check the remaining battery capacity?
Press the check button on the battery cartridge to indicate the remaining battery capacity.
What is the function of the control panel?
The control panel has the main power switch, the mode switching button, and the indicator of remaining battery capacity.
When should you turn off the main power switch?
Always turn off the main power switch when not in use.
How do you turn on the machine?
To turn on the machine, press the main power switch.
What happens when the main power switch is turned on?
The main power lamp lights up in green.
How do you turn off the machine?
To turn off the machine, press the main power switch again.
What should you do when the power lamp blinks in red or green?
Refer to the instructions for tool/battery protection system.
What should you do if you want to decrease the noise at mowing?
When you press the mode switching button, the machine shifts to the energy-saving mode and the mode switching lamp lights up in green.
How do you return the machine to the normal mode?
When you press the mode switching button again, the machine returns to the normal mode.
How do you check the remaining battery capacity on the control panel?
Press the check button to indicate the remaining battery capacities. The battery indicators correspond to each battery.
What should you always check before installing the battery cartridge?
Before installing the battery cartridge, always check to see that the switch lever actuates properly and returns to the original position when released.
What can happen if you operate a tool with a switch that does not actuate properly?
Operating a tool with a switch that does not actuate properly can lead to loss of control and serious personal injury.
What button needs to be pressed for the mower to start?
The mower does not start without pressing the switch button even the switch lever is pulled.
Why might the mower not start?
Mower may not start due to the overload when you try to mow long or dense grass at a time.
What should you do if the mower does not start due to the overload?
Increase the mowing height in this case.
How do you start the mower?
Install the battery cartridges. Insert the lock key into the interlock switch and then close the battery cover. Press the main power switch. Press the switch button and hold it. Grab the upper handle and pull the switch lever.
What happens if the lock key is not inserted when you pull the switch lever?
If the lock key is not inserted, the power lamp blinks in green when you pull the switch lever.
When do you release the switch button when starting the mower?
Release the switch button as soon as the motor starts running.
How do you stop the motor?
Release the switch lever to stop the motor.
What should you never put under the mower body when adjusting the mowing height?
Never put your hand or leg under the mower body when adjusting the mowing height.
What should you always make sure of before operation?
Always make sure that the lever fits in the groove properly before operation.
What is the mowing height range for DLM460?
The mowing height can be adjusted in the range of between 20 mm and 75 mm.
What is the mowing height range for DLM461?
The mowing height can be adjusted in the range of between 16 mm and 71 mm.
How do you adjust the mowing height?
Remove the lock key, and then pull the mowing height adjusting lever outward of the mower body and move it to your desired mowing height.
How should you hold the mower when adjusting the mowing height?
Hold the front grip with one hand, and then move the mowing height adjusting lever with the other hand.
How can you get your desired height when mowing?
Try a test mowing of grass in a less conspicuous place to get your desired height.
How do you adjust the handle height?
Loosen the thumb nuts of the lower handle, and then remove the bolts, washer, and thumb nuts. Adjust the handle height. Insert the bolts from inside, then attach washers from outside, and then tighten the thumb nuts.
What should you be sure to remove when operating the machine with the mulching attachment?
When you operate the machine with the mulching attachment, be sure to remove the grass basket.
What does the constant speed control do?
Electronic speed control for obtaining constant speed. Possible to get fine finish, because the rotating speed is kept constant even under load condition.
What does the soft start function do?
The soft-start function minimizes start-up shock, and makes the machine start smoothly.
What should you clear away before mowing?
Before mowing, clear away sticks and stones from mowing area. Furthermore, clear away any weeds from mowing area in advance.
What should you always wear when operating the mower?
Always wear the safety goggles or safety glasses with side shields when operating the mower.
What should you do if the cut grass or foreign object blocks up inside of the mower body?
If the cut grass or foreign object blocks up inside of the mower body, be sure to remove the lock key and battery cartridge and wear gloves before removing the grass or foreign object.
What should you use this machine for?
Use this machine for mowing lawn only. Do not mow weeds with this machine.
How should you hold the handle when mowing?
Firmly hold the handle with both hands when mowing.
What is the mowing speed guideline?
The mowing speed guideline is approximately 1 meter per 4 seconds.
How should you mow?
Using the center lines as guidelines, mow in strips. Overlap by one half to one third the previous strip to mow the lawn evenly.
What should you change each time you mow?
Change the mowing direction each time to prevent the grass grain pattern from forming in just one direction.
What should you check periodically?
Periodically check the grass basket for mowed grass.
When should you empty the grass basket?
Empty the grass before it becomes full.
What should you do before every periodical check?
Before every periodical check, be sure to stop the mower then remove the lock key and the battery cartridge.
What happens when you use the mower with the grass basket full?
Using the mower with the grass basket full prevents smooth blade rotation and places an extra load on the motor, which may cause breakdown.
How should you mow long grass?
Do not try to cut long grass all at once. Instead, mow the lawn in steps.
How much time should you leave between mowings when mowing long grass?
Leave a day or two between mowings until the lawn becomes evenly short.
What may cause the grass to die?
Mowing long grass to a short length all at once may cause the grass to die.
What may cause a blockage inside the mower body?
The cut grass may also block up inside of the mower body.
How do you empty the grass basket?
Release the switch lever. Remove the lock key. Open the rear cover and take out the grass basket by holding the handle. Empty the grass basket.
What should you regularly check the grass basket for?
To reduce a risk of accident, regularly check the grass basket for any damage or weakened strength.
What should you do with the grass basket if necessary?
Replace the grass basket if necessary.
What should you always be sure of before storing or carrying the mower?
Always be sure that the lock key and battery cartridge are removed from the mower before storing or carrying the mower or attempting to perform inspection or maintenance.
When should you always remove the lock key?
Always remove the lock key when the mower is not in use.
Where should you store the lock key?
Store the lock key in a safe place out of reach of children.
What should you wear when performing inspection or maintenance?
Wear gloves when performing inspection or maintenance. Always wear the safety goggles or safety glasses with side shields when performing inspection or maintenance.
What should you never use to clean the mower?
Never use gasoline, benzine, thinner, alcohol or the like.
Who should perform repairs, any other maintenance or adjustment?
Repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
How do you perform maintenance?
Remove the lock key and battery cartridges, and then close the battery cover. Put the mower on its side and clean grass clippings accumulated on the underside of mower deck. Pour water toward the bottom of the machine to which the blade is attached. Check the blade and blade bolts for tightness. Inspect moving parts for damage, breakage, and wear. Damaged or missing parts should be repaired or replaced. Store the mower in a safe place out of the reach of children.
How should you carry the mower?
When carrying the mower, hold the front grip and lower handle with two people as shown in the figure.
Where should you store the mower?
Store mower indoors in a cool, dry and locked place.
Where should you not store the mower and charger?
Don’t store the mower and charger in locations where the temperature may reach or exceed 40 °C (104 °F).
How do you store the mower?
Open the rear cover and take out the grass basket by holding the handle. Loosen the thumb nuts and fold the upper handle.
What should you always remove when removing or installing the blade?
Always remove the lock key and battery cartridge when removing or installing the blade.
What should you not do until the blade comes to a complete stop?
The blade coasts for a few seconds after releasing the switch. Do not start any operation until the blade comes to a complete stop.
What should you always wear when handling the blade?
Always wear gloves when handling the blade.
How do you remove the mower blade for DLM460?
Put the mower on its side so that the mowing height adjusting lever comes to the upper side. To lock the blade, insert a lumber or similar into the mower. Turn the bolt counterclockwise with the wrench. Remove the bolt, washer, mower blade in order.
How do you remove the mower blade for DLM461?
Put the mower on its side so that the mowing height adjusting lever comes to the upper side. Turn the bolt counterclockwise with the wrench while holding the base plate. Remove the bolt, washer, base plate in order. To remove the individual blade, turn the bolt counter-clockwise with the wrench while holding the base plate.
How do you install the mower blade?
To install the mower blade, take the removal procedure in reverse. Install the blade carefully. Place the blade so that the rotational direction arrow faces outward. Tighten the bolt clockwise firmly to secure the blade. Make sure that the blade and all the fixing parts are installed correctly and tightened securely. When you replace the blades, always follow the instructions provided in this manual. Slide the mower blade so that the protrusions touch the mower blade.
What should you do before asking for repairs?
Before asking for repairs, conduct your own inspection first.
What should you do if you find a problem that is not explained in the manual?
If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs.
What should you do if the mower does not start?
Install the charged battery cartridges. Recharge the battery cartridge. If recharging is not effective, replace battery cartridge. Insert the lock key.
What should you do if the motor stops running after a little use?
Recharge the battery cartridge. If recharging is not effective, replace battery cartridge. Raise the cutting height.
What should you do if the motor does not reach maximum RPM?
Install the battery cartridge as described in this manual. Recharge the battery cartridge. If recharging is not effective, replace battery cartridge.
What should you do if the drive system does not work correctly?
Ask your local authorized service center for repair.
What should you do if the cutting tool does not rotate?
Remove the foreign object. Ask your local authorized service center for repair.
What should you do if there is abnormal vibration?
Replace the blade.
CLICK HERE TO DOWNLOAD MAKITA DLM461 (01) PDF MANUAL