MAKITA DCS4600S (01) PDF MANUAL

FREE ENGLISH MAKITA DCS4600S (01) PDF USER GUIDE

FREE ENGLISH MAKITA DCS4600S (01) PDF USER MANUAL

FREE ENGLISH MAKITA DCS4600S (01) PDF OWNER GUIDE

FREE ENGLISH MAKITA DCS4600S (01) PDF OWNER MANUAL

FREE ENGLISH MAKITA DCS4600S (01) PDF REFERENCE GUIDE

FREE ENGLISH MAKITA DCS4600S (01) PDF INSTRUCTION GUIDE

FREE ENGLISH MAKITA DCS4600S (01) PDF REFERENCE MANUAL

FREE ENGLISH MAKITA DCS4600S (01) PDF INSTRUCTION MANUAL

FREE ENGLISH MAKITA DCS4600S (01) PDF OPERATING INSTRUCTIONS

CLICK HERE TO DOWNLOAD MAKITA DCS4600S (01) PDF MANUAL

If this is not the document you want for this product, click here to see if we have any other documents for this product.

What Makita models does this spare parts list cover?

This spare parts list covers the following Makita models:

DCS460

DCS461

DCS500

DCS501

DCS4600S

DCS4600SH

DCS5000

DCS5000H

DCS5001

DCS5001H

DCS460 (USA)

DCS510 (USA)

DCS5121 (USA)

DE5045

What are the spare parts for the Fuel tank and tubular grip?

The spare parts listed for the Fuel tank and tubular grip assembly include:

Pos.	Part No.	Description	Specification	Notes
1	181 114 680	TANK CPL. BLUE
2	181 117 050	GRIP OUTER SHELL, BLACK
3	181 117 132	CATCH LEVER
4	181 117 031	SPRING
5	181 117 081	ROCKER
6	181 117 110	SPRING
7	010 117 050	MODIFICATION SET	INCL. 30	TI 2005/13
8	935 930 240	CYLINDRICAL PIN	3×24
9	181 117 121	THROTTLE LEVER		2006-09 =>
9	181 117 120	THROTTLE LEVER		=> 2006-08
10	957 114 061	AIR VALVE CPL.
11	913 455 204	SCREW	5,5×20
12	181 114 064	FUEL LINE
13	010 114 010	SUCTION HEAD
14	010 114 020	REP. KIT, FILTER (5 OF EACH)
15	181 114 202	TANK CAP CPL.
16	963 229 036	PACKING RING	29,3X3,6
17	181 114 301	DAMPING SPRING, CPL.
18	181 114 301	DAMPING SPRING, CPL.
19	181 310 200	TUBULAR HANDLE	Kst.
20	913 455 204	SCREW	5,5×20
21	913 455 164	SCREW	5,5X16
22	181 114 652	COVER	MAKITA
23	908 006 205	SCREW	M6x20
24	913 455 204	SCREW	5,5×20
25	181 310 250	TUBULAR HANDLE	Al	USA
181	980 115 253	CAUTION LABEL	J	J

What are the spare parts for the Hood, air filter, and muffler?

The spare parts listed for the Hood, air filter, and muffler assembly include:

Pos.	Part No.	Description	Specification	Notes
26	181 118 102	HOOD CPL. RED		INT/RU
26	181 118 602	HOOD CPL. GREY
26	181 118 620	HOOD CPL. GREY	KAT	USA
27	181 118 060	INSERT
28	181 173 240	AIR FILTER CPL., FINE	NYLON
28	181 173 090	AIR FILTER ASS’Y	NYLON
28	181 173 190	AIR FILTER ASS’Y	VLIES
29	181 171 050	CLIP FOR AIR FILTER
30	010 117 050	MODIFICATION SET	INCL. 7	TI 2005/13
31	908 505 555	SCREW	M5x55
32	181 155 020	CHOKE ON/OFF SWITCH
33	970 311 550	EARTH CABLE	Messing, Brass
34	913 455 164	SCREW	5,5X16
35	980 115 154	LABEL, BLACK	SPEED
36	181 131 603	BOTTOM BLUE
37	908 805 205	SCREW	M5X20
38	038 118 110	RUBBER FLAP
39	938 650 062	RIVET
40	181 171 150	FLANGE KPL.
41	181 131 090	TUBE
42	181 131 040	SUCTION HOSE
43	181 118 160	INSERT (SNOW)
44	181 131 070	ANNULAR SPRING
45	913 455 164	SCREW	5,5X16
46	181 155 010	CONTACT SPRING
47	181 155 030	ADJUSTING GUIDE
48	913 455 164	SCREW	5,5X16
49	928 405 000	DISC
50	980 114 928	LABEL	CHOKE I-0
51	957 173 250	SNOW FILTER SET
52	181 173 250	PRE-FILTER
53	181 174 102	MUFFLER
54	181 174 201	MUFFLER	AU, NZ
55	181 174 250	SPARK ARRESTER SCREEN CPL.	AU, NZ
56	915 035 120	SCREW
57	181 174 062	COOLING PLATE
58	181 174 050	GASKET
59	908 005 205	SCREW	M5x20
60	181 174 091	SHEET-METAL
61	908 005 095	SCREW	M5x9
62	908 805 205	SCREW	M5X20
63	181 131 021	INSERT
108	181 174 300	MUFFLER	KAT	2009-03 =>
109	181 174 470	SPARK ARRESTER SCREEN CPL.	KAT
110	908 005 095	SCREW	M5x9
142	181 155 011	CONTACT SPRING		2010 =>
144	970 311 580	EARTH CABLE	Stahl, Steel	2010 =>
148	181 155 070	CHOKE ON/OFF SWITCH		2010 =>

What are the spare parts for the Cylinder and crankcase?

The spare parts listed for the Cylinder and crankcase assembly include:

Pos.	Part No.	Description	Specification	Notes
65	178 130 214	CYLINDER / PISTON CPL.	D43
65	178 130 252	CYLINDER / PISTON CPL.	Ø 43 DECO	=> 2009
65	179 130 214	CYLINDER / PISTON CPL.	D45
65	179 130 252	CYLINDER / PISTON CPL.	Ø 45 DECO	=> 2009
65	180 130 215	CYLINDER / PISTON CPL.	Ø 43
65	181 130 216	CYLINDER / PISTON CPL.	Ø 45
65	181 130 255	CYLINDER / PISTON CPL.	Ø 45 DECO	=> 2009
66	180 132 063	PISTON CPL.	Ø 43
66	181 132 063	PISTON CPL.	D45
67	180 132 080	PISTON RING	Ø 43
67	181 132 080	PISTON RING	Ø 45
68	181 132 090	PISTON PIN
69	181 132 050	SPRING RING	C 12X1
70	181 118 070	DAMPING PLUG
71	001 131 150	VALVE		=> 2009
72	908 805 235	SCREW	M5x23
73	181 114 401	DAMPING SPRING, CPL.
74	181 131 132	GASKET		2008-03 =>
74	181 131 131	GASKET, METAL		=> 2008-02
75	181 120 100	CRANKSHAFT CPL.
75	181 120 102	CRANKSHAFT CPL.		2010-03 =>
76	962 210 033	NEEDLE CAGE	10x13x12,5
77	960 102 159	BALL BEARING (USE GLUE)	6202
78	960 123 159	COMBINATION BALL BEARING	6202 C3
79	962 900 156	RADIAL RING	Ø12/20×4,5
80	179 111 653	CRANKC. M. SIDE BLUE	AI
80	181 111 655	CRANKC. M. SIDE BLUE	Mg
81	179 111 641	CRANKC. CL. SIDE BLUE	AI
81	181 111 642	CRANKC. CL. SIDE BLUE	Mg
82	181 111 060	GASKET
83	170 114 100	TANK CAP COMPLETE
84	963 225 030	PACKING RING
85	181 118 050	STEELCLIP
86	908 006 205	SCREW	M6x20
87	908 805 205	SCREW	M5X20
88	181 111 230	IMPACT PROTECTION
89	936 430 160	CLAMPING PIN	3X16
90	181 111 230	IMPACT PROTECTION
91	908 805 205	SCREW	M5X20
92	908 005 205	SCREW	M5x20
93	181 111 050	CHAIN CATCH
94	908 006 205	SCREW	M6x20
95	905 808 210	SCREW	M8x21
96	181 250 011	SPIKE BAR
97	908 805 205	SCREW	M5X20
98	010 245 030	VENT VALVE
99	962 900 065	RADIAL RING
100	181 213 300	CHAIN TENSIONER CPL.	PROFI
101	181 213 230	TENSIONING SCREW	PROFI
102	181 213 240	TENSION SLIDE	PROFI
103	181 213 250	ADJUSTING SCREW	PROFI
104	181 213 270	TRANSMISSION COVER	PROFI
105	181 213 260	TENSIONING SCREW BEARING	PROFI
106	963 207 020	PACKING RING	7X2
107	908 705 125	SCREW	M5x12
111	181 250 020	SPIKE BAR	US

What are the spare parts for the Ignition electronics and starter?

The spare parts listed for the Ignition electronics and starter assembly include:

Pos.	Part No.	Description	Specification	Notes
115	181 160 650	STARTER ASSY. BLUE
116	181 112 621	FAN HOUSING BLUE
117	980 115 222	LABEL	DCS460
117	980 115 223	LABEL	DCS461
117	980 115 220	LABEL	DCS500
117	980 115 221	LABEL	DCS501
117	980 115 218	LABEL	DCS4600
117	980 115 216	LABEL	DCS5000
117	980 115 217	LABEL	DCS5001
117	980 115 224	LABEL	DCS510
117	980 115 198	LABEL	DE5045
118	908 805 205	SCREW	M5X20
119	001 161 020	STARTER GRIP
120	108 164 020	STARTER ROPE	Ø 3,5 x 980 mm
121	985 000 155	STARTER ROPE	Ø 3,5 x 100 m	ACC.
122	928 405 000	DISC
123	181 162 150	CABLE DRUM CPL.
124	181 163 020	REWIND SPRING IN HOUSING
125	924 605 510	WASHER	Ø 5,5x18x1,6
126	913 455 204	SCREW	5,5×20
127	181 118 041	AIR GUIDE PLATE
128	181 143 204	IGNITION COIL, CPL., RED
128	181 143 205	IGNITION COIL, CPL., BLACK		2010-03 =>
129	181 147 050	IGNITION CABLE
130	195 143 030	WASHER
131	970 502 110	ISOLATING HOSE	L=55mm
132	957 604 260	SPARK PLUG CAP CPL.
133	965 603 021	SPARK PLUG
134	908 805 205	SCREW	M5X20
135	920 308 024	HEXAGONAL NUT	M8x1
136	926 208 001	SPRING WASHER	B8 DIN137
137	181 141 104	FLYWHEEL CPL.
138	181 166 050	STARTER RATCHET CPL.
182	181 160 655	STARTER ASSY. BLUE	FARMER
183	181 112 660	STARTER ASSY. BLUE
184	181 118 041	AIR GUIDE PLATE
185	181 164 010	STARTER KNOB
186	908 605 205	SCREW	M5x20
187	181 163 050	REWIND SPRING IN HOUSING
188	181 162 020	CABLE DRUM
189	181 163 080	SPRING EASY-START
190	181 163 090	DRIVER FOR EASY-START
191	181 163 095	SCREW
192	181 164 020	STARTER ROPE	Ø 3,5 x 1100 mm
192	985 000 155	STARTER ROPE	Ø 3,5 x 100 m
194	195 141 103	FLYWHEEL CPL.
195	195 166 100	STARTER RATCHET CPL.

What are the spare parts for the Oil pump, clutch, and chain brake?

The spare parts listed for the Oil pump, clutch, and chain brake assembly include:

Pos.	Part No.	Description	Specification
140	181 245 250	OIL PUMP CPL.
141	181 245 260	REPAIR KIT, OIL PUMP
143	181 245 120	PRESSURE LINE
145	181 245 100	SUCTION LINE
146	021 245 060	SPRING
147	001 245 020	HOSE STEM
149	908 705 125	SCREW	M5x12
150	181 245 090	PUMP DRIVE
151	001 182 042	DISC	44,5x1x12
152	181 180 200	CLUTCH ASSY.
153	181 184 010	SPRING
154	181 224 090	SHIM	10x18x0,5
155	181 213 010	BRAKE SPRING
156	181 223 062	CLUTCH DRUM CPL.	SMALL
157	962 300 009	NEEDLE SLEEVER	10/14X12
158	181 224 040	RIM SPROCKET	.325″, Z=7, SM
158	026 224 010	RIM SPROCKET	3/8″, Z=7, SM
159	181 224 081	DISC
160	927 408 000	WASHER	D=8X1,3
161	927 304 000	SAFETY WASHER
162	181 213 100	BRAKING MECHANISM
163	181 213 020	SPRING
164	181 213 170	HANDGUARD GUIDE, CPL.
165	181 213 371	FOAM SPONGE
167	181 213 161	HAND GUARD CPL.
167	181 213 660	HAND GUARD CPL.
168	980 114 237	LABEL
168	980 115 200	LABEL
169	181 213 310	SPACER
170	181 213 320	BUSHING
171	908 805 205	SCREW	M5X20
173	181 250 030	SPIKE BAR	US
174	181 213 400	FOAM SPONGE
175	957 213 600	SPROCKET GUARD CPL. BLUE
176	923 208 004	HAXAGONAL NUT	M8
177	957 213 220	CHIP GUIDE
178	181 213 191	COVER
179	908 105 126	SCREW	M5x12
180	181 223 311	CLUTCH DRUM CPL.	.325″, Z=7
180	181 223 321	CLUTCH DRUM CPL.	3/8″, Z=7

What are the spare parts for the Carburetor?

The spare parts listed for the Carburetor assembly include:

Pos.	Part No.	Description	Specification
200	181 153 100	CARBURETOR	LC – EU / J
201	181 153 300	CARBURETOR	LC – US
202	181 153 030	PUMP COVER CPL.
203	038 153 360	SCREW
204	181 153 040	DIAPHRAGM COVER
205	001 153 020	SCREW
206	181 153 020	SET DIAPHRAGM / GASKETS
207	181 153 060	PUMP DIAPHRAGM RUBBER
207	181 153 050	PUMP DIAPHRAGM TEFLON
208	038 153 210	FRICTION BALL
209	181 153 070	IDLE STOP SCREW	S
210	036 153 040	SCREEN
211	957 153 090	KIT THROTTLE SHAFT
212	957 153 080	KIT CHOKE SHAFT
213	957 153 070	CONTROL PARTS
214	028 153 480	SPRING
215	181 153 180	IDLE ADJUSTMENT SCREW	L – EU
216	181 153 190	MAIN ADJUSTMENT SCREW	H – EU
217	181 153 220	WASHER
218	181 153 280	LIMITER CAP, WHITE	US
219	038 153 310	LIMITER CAP, RED	US
220	181 153 260	IDLE ADJUSTMENT SCREW	L – US
221	181 153 270	MAIN ADJUSTMENT SCREW	H – US
222	181 153 290	RUBBER RING	US
223	038 153 320	ADJUSTING GUIDE	US
224	181 153 110	SPRING
225	181 153 160	SPRING
226	181 153 210	PLUG-WELCH
230	038 155 012	RETAINING CLIP
231	965 402 995	GASKET

What are the special spare parts for the version with electric handle heating?

The special spare parts listed for the version with electric handle heating include:

Pos.	Part No.	Description	Specification
300	181 114 670	TANK CPL. BLUE HANDLE HEAT.
301	181 148 071	CABLE GUIDE
302	915 535 100	SCREW	3,5×9,5
303	965 401 011	RUBBER BUSHING
304	038 146 030	INSULATING CAP
305	975 001 230	SWITCH
306	975 001 260	SWITCH END CAP
307	181 310 150	TUBULAR HANDLE ASSY.
308	965 401 011	RUBBER BUSHING
309	038 146 030	INSULATING CAP
310	965 401 011	RUBBER BUSHING
311	908 004 125	SCREW	4×12
312	181 148 060	GENERATOR COIL
313	908 004 125	SCREW	4×12
314	181 148 105	FLYWHEEL ASSY.
315	181 111 663	CRANKC. MA. SIDE BLUE

(Note: These parts are typically applicable to models DCS4600SH, DCS5000H, DCS5001H)

What guide bars, saw chains, and tools are listed?

The guide bars, saw chains, and tools listed include:

.325″ Pitch Parts:

Pos.	Part No.	Description	Specification	Notes
500	445 033 631	SPROCKET NOSE BAR	.325″ .058″ 33CM-13″
500	445 038 631	SPROCKET NOSE BAR	.325″ .058″ 38CM-15″
500	445 045 631	SPROCKET NOSE BAR	.325″ .058″ 45CM-18″
501	415 325 710	SPROCKET NOSE	.325″ .058″
502	528 086 656	SAW CHAIN	.325″ .058″ 33CM-13″
502	528 086 664	SAW CHAIN	.325″ .058″ 38CM-15″
502	528 086 672	SAW CHAIN	.325″ .058″ 45CM-18″
503	534 686 056	SAW CHAIN	.325″ .058″ 33CM-13″
503	534 686 064	SAW CHAIN	.325″ .058″ 38CM-15″
503	534 686 072	SAW CHAIN	.325″ .058″ 45CM-18″
504	558 083 000	TIE STRAP	.325″ .058″
505	558 083 010	TIE STRAP WITH RIVETS	.325″ .058″
530	445 040 641	SPROCKET NOSE BAR	.325″ .050″ 40CM-16″	US
531	415 325 720	SPROCKET NOSE	.325″ .050″	US
532	523 082 666	SAW CHAIN	.325″ .050″ 40CM-16″	US
532	513 486 672	SAW CHAIN	.325″ .050″ 45CM-18″	US
534	558 486 000	TIE STRAP	.325″ .050″	US
535	558 486 010	TIE STRAP WITH RIVETS	.325″ .050″	US

3/8″ Pitch Parts:

Pos.	Part No.	Description	Specification	Notes
510	443 038 651	SPROCKET NOSE BAR	3/8″ .058″ 38CM-15″
510	443 045 651	SPROCKET NOSE BAR	3/8″ .058″ 45CM-18″
510	443 053 651	SPROCKET NOSE BAR	3/8″ .058″ 53CM-21″
511	415 038 720	SPROCKET NOSE	3/8″ .058″
512	523 093 656	SAW CHAIN	3/8″ .058″ 38CM-15″
512	523 093 664	SAW CHAIN	3/8″ .058″ 45CM-18″
512	523 093 672	SAW CHAIN	3/8″ .058″ 53CM-21″
513	528 099 656	SAW CHAIN	3/8″ .058″ 35/38CM-14/15″
513	528 099 672	SAW CHAIN	3/8″ .058″ 53CM-21″
513	528 099 664	SAW CHAIN	3/8″ .058″ 45CM-18″
514	558 093 000	TIE STRAP	3/8″ .058″
515	558 093 010	TIE STRAP WITH RIVETS	3/8″ .058″
540	443 045 661	SPROCKET NOSE BAR	3/8″ .050″ 45CM-18″	US
541	415 038 730	SPROCKET NOSE	3/8″ .050″	US
542	513 496 664	SAW CHAIN	3/8″ .050″ 45CM-18″	US
544	558 496 000	TIE STRAP	3/8″ .050″	US
545	558 496 010	TIE STRAP WITH RIVETS	3/8″ .050″	US

Tools and Accessories:

Pos.	Part No.	Description	Specification	Notes
518	952 010 630	CHAIN PROTECTION	30-35 cm
518	952 020 640	CHAIN PROTECTION	38-45 cm
518	952 020 650	CHAIN PROTECTION	50 cm
520	957 004 002	TOOL CPL.
521	941 719 131	UNIVERSAL WRENCH	SW 13/19
522	940 827 000	ANGLED SCREW DRIVER	T27
523	944 340 001	SCREWDRIVER
524	950 004 002	PLASTIK BAG
–	–	Gauge	1,5 mm .058″	(Refers to chain gauge)
–	–	Gauge	1,3 mm .050″	(Refers to chain gauge)

How are the symbols in the parts list explained?

The symbols used in the parts list are explained as follows:

Symbol	Key to symbols
=> 1999999	Production to serial number
2000000 =>	New part from serial number
2003.04 =>	New part from Year / Month
TI 2003/07	See Technical Information Year / No.
Acc.	Accessories (not included in the delivery inventory)
=	No standard execution, may be used
{	Contains item number
m	Sold by the meter
Corr.	Error correction

Additionally, specifications are subject to change without notice.