FREE ENGLISH MAKITA DC10WA (02) PDF USER GUIDE
FREE ENGLISH MAKITA DC10WA (02) PDF USER MANUAL
FREE ENGLISH MAKITA DC10WA (02) PDF OWNER GUIDE
FREE ENGLISH MAKITA DC10WA (02) PDF OWNER MANUAL
FREE ENGLISH MAKITA DC10WA (02) PDF REFERENCE GUIDE
FREE ENGLISH MAKITA DC10WA (02) PDF INSTRUCTION GUIDE
FREE ENGLISH MAKITA DC10WA (02) PDF REFERENCE MANUAL
FREE ENGLISH MAKITA DC10WA (02) PDF INSTRUCTION MANUAL
FREE ENGLISH MAKITA DC10WA (02) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD MAKITA DC10WA (02) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
MAKITA DC10WA (02) PDF SUMMARY:
What do the symbols used for the equipment mean?
The symbols used for the equipment are explained in the PDF, and it is important to understand their meaning before using the equipment.
What is the purpose of a battery charger?
A battery charger is used to charge batteries.
What should you read before using the battery charger?
It is important to read the instruction manual before using the battery charger.
What does “DOUBLE INSULATION” mean?
“DOUBLE INSULATION” means that the product has double insulation.
Where should the battery charger be used?
The battery charger should only be used indoors.
What does the light indicator mean when it is lit in green?
A solid green light indicates that the charger is ready to charge.
What does the light indicator mean when it is lit in red?
A solid red light indicates that the battery is currently charging.
What does the light indicator mean when it changes from red to green?
When the light indicator changes from red to green, it indicates that the charging cycle is complete.
What does the light indicator mean when it is flashing red?
A flashing red light indicates a delay in charging because the battery is too hot.
What does the light indicator mean when it flashes alternately in green and red?
If the charging light flashes alternately in green and red, charging is not possible, possibly because the terminals on the charger or battery cartridge are clogged with dust, or the battery cartridge is worn out or damaged.
What should you do with batteries that are no longer usable?
Always recycle batteries.
What is important to know about the battery charger?
This manual contains important safety and operating instructions for the battery charger.
What should you read before using the battery charger?
Before using the battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.
What type of batteries should be charged with this charger?
Only MAKITA rechargeable batteries should be charged with this charger. Other types of batteries may burst causing personal injury and damage.
Can non-rechargeable batteries be charged with this charger?
Non-rechargeable batteries cannot be charged with this battery charger.
What kind of power source should be used?
Use a power source with the voltage specified on the nameplate of the charger.
Where should you not charge the battery?
Do not charge the battery cartridge in presence of flammable liquids or gases.
What should you not expose the charger to?
Do not expose the charger to rain or snow.
How should you carry or disconnect the charger?
Never carry the charger by the cord or yank it to disconnect from the receptacle.
What should you do after charging or before any maintenance or cleaning?
After charging or before attempting any maintenance or cleaning, unplug the charger from the power source by pulling the plug.
Where should the cord be located?
Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
What should you do if the charger has a damaged cord or plug?
Do not operate the charger with a damaged cord or plug. Replace them immediately.
What should you do if the charger has been damaged?
Do not operate or disassemble the charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to a qualified serviceman. Incorrect use or reassembly may result in a risk of electric shock or fire.
Who should not use the battery charger without supervision?
The battery charger is not intended for use by young children or infirm persons without supervision.
What should you do to ensure young children’s safety around the battery charger?
Young children should be supervised to ensure that they do not play with the battery charger.
What are the temperature limitations for charging the battery cartridge?
Do not charge the battery cartridge when the temperature is BELOW 10°C (50°F) or ABOVE 40°C (104°F).
What should you not attempt to use with the battery charger?
Do not attempt to use a step-up transformer, an engine generator, or DC power receptacle.
How do you start charging a battery?
- Plug the battery charger into the proper AC voltage source. The charging light will flash in green color.
- Insert the battery cartridge so that the plus and minus terminals on the battery cartridge are on the same sides as their respective markings on the charger.
- When the battery cartridge is inserted fully, the charging light will change from green to red and charging will begin. The charging light will remain lit steadily during charging.
How do you know when charging is complete?
When the charging light changes from red to green, the charging cycle is complete.
What should you do after charging is complete?
After charging, unplug the charger from the power source.
What is the battery charger designed for?
The battery charger is for charging Makita battery cartridges. Never use it for other purposes or for other manufacturer’s batteries.
What may cause the charging light to flash in red?
If you charge a battery cartridge from a just-operated tool or a battery cartridge which has been exposed to direct sunlight or heat for a long time, the charging light may flash in red. If this occurs, wait for a while. Charging will begin after the battery cartridge cools.
What does it mean if the charging light flashes alternately in green and red?
If the charging light flashes alternately in green and red, charging is not possible. The terminals on the charger or battery cartridge are clogged with dust, or the battery cartridge is worn out or damaged.
What are the charging times for different battery types?
- BL7010: 7.2V, 2 cells, 1.0Ah, 30 minutes
- BL1013: 10.8V, 3 cells, 1.3Ah, 50 minutes
CLICK HERE TO DOWNLOAD MAKITA DC10WA (02) PDF MANUAL