FREE ENGLISH MAKITA 9067DB (02) PDF USER GUIDE
FREE ENGLISH MAKITA 9067DB (02) PDF USER MANUAL
FREE ENGLISH MAKITA 9067DB (02) PDF OWNER GUIDE
FREE ENGLISH MAKITA 9067DB (02) PDF OWNER MANUAL
FREE ENGLISH MAKITA 9067DB (02) PDF REFERENCE GUIDE
FREE ENGLISH MAKITA 9067DB (02) PDF INSTRUCTION GUIDE
FREE ENGLISH MAKITA 9067DB (02) PDF REFERENCE MANUAL
FREE ENGLISH MAKITA 9067DB (02) PDF INSTRUCTION MANUAL
FREE ENGLISH MAKITA 9067DB (02) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD MAKITA 9067DB (02) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
MAKITA 9067DB (02) PDF SUMMARY:
What should I do before using the angle grinder?
Read and understand the instruction manual before using the angle grinder. Failure to follow the instructions may result in electric shock, fire, or serious personal injury.
Where should power tools not be operated?
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
What is an important practice regarding the power tool’s switch before plugging it in?
Be sure the switch is off before plugging the tool in. Plugging in tools that have the switch on invites accidents.
What should be done before making adjustments, changing accessories, or storing the tool?
Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.
What should I check for if the tool appears damaged?
Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.
What type of accessories should be used with the angle grinder?
Use only accessories that are recommended by the manufacturer for the model. Accessories that may be suitable for one tool may become hazardous when used on another tool.
What should I always use with a grinding wheel?
Always use a proper guard with grinding wheel. A guard protects the operator from broken wheel fragments.
What should the accessories be rated for?
Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories running over rated speed can fly apart and cause injury.
How should I hold the tool when there is a chance the cutting tool may contact hidden wiring or its own cord?
Hold the tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
When using depressed center grinding wheels, what kind should I use?
When using depressed center grinding wheels, be sure to use only fiberglass-reinforced wheels.
What should I always use for eye protection?
Always use safety glasses or goggles. Ordinary eye or sun glasses are NOT safety glasses.
What should I check on the wheel before operation?
Check the wheel carefully for cracks or damage before operation. Replace cracked or damaged wheel immediately.
How do you test a replaced wheel?
Run the tool (with guard) at no load for about a minute, holding tool away from others. If the wheel is flawed, it will likely separate during this test.
What should I do to the spindle, the flange, or the lock nut?
Be careful not to damage the spindle, the flange (especially the installing surface) or the lock nut. Damage to these parts could result in wheel breakage.
What kind of blades should I avoid using?
Never use tool with wood cutting blades or other sawblades. Such blades when used on a grinder frequently kick and cause loss of control leading to personal injury.
What should I ensure about the wheel before turning on the switch?
Make sure the wheel is not contacting the workpiece before the switch is turned on.
What should I watch for before using the tool on an actual workpiece?
Before using the tool on an actual workpiece, let it run for a while. Watch for vibration or wobbling that could indicate poor installation or a poorly balanced wheel.
What part of the wheel should be used for grinding?
Use the specified surface of the wheel to perform the grinding.
What should I watch out for when using the tool?
Watch out for flying sparks. Hold the tool so that sparks fly away from you and other persons or flammable materials.
When should I operate the tool?
Operate the tool only when hand-held.
What should I do after operation?
Do not touch the workpiece immediately after operation; it may be extremely hot and could burn your skin.
What apparel should I wear?
Always wear proper apparel including long sleeve shirts, leather gloves and shop aprons to protect skin from contact with hot grindings.
What could the use of this tool expose the user to?
Use of this tool to grind or sand some products, paints and wood could expose user to dust containing hazardous substances. Use appropriate respiratory protection.
What should I always be sure of before adjusting or checking function on the tool?
Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.
When should I not actuate the shaft lock?
Never actuate the shaft lock when the spindle is moving. The tool may be damaged.
What should I always check before plugging in the tool?
Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released.
What should I do if the switch can be locked in the “ON” position?
Apply caution when locking tool in “ON” position and maintain firm grasp on tool.
How do I start and stop the tool?
To start the tool, simply pull the switch trigger. Release the switch trigger to stop. For continuous operation, pull the switch trigger and then push in the lock lever. To stop the tool from the locked position, pull the switch trigger fully, then release it.
What should I always be sure of before carrying out any work on the tool?
Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.
What should I always be sure of before operation?
Always be sure that the side grip is installed securely before operation.
How should the wheel guard be fitted on the tool?
When using a depressed center grinding wheel/Multi-disc, flex wheel or wire wheel brush, the wheel guard must be fitted on the tool so that the closed side of the guard always points toward the operator.
How do I mount the wheel guard?
Mount the wheel guard with the protrusion on the wheel guard band aligned with the notch on the bearing box. Then rotate the wheel guard around 180 degrees. Be sure to tighten the screw securely.
What should I always use when a depressed center grinding wheel/Multi-disc is on the tool?
Always use supplied guard when depressed center grinding wheel/Multi-disc is on tool. Wheel can shatter during use and guard helps to reduce chances of personal injury.
How do I mount the inner flange?
Mount the inner flange onto the spindle. Fit the wheel/disc on the inner flange and screw the lock nut onto the spindle.
How do I tighten the lock nut?
To tighten the lock nut, press the shaft lock firmly so that the spindle cannot revolve, then use the lock nut wrench and securely tighten clockwise.
What should I always use when a flex wheel is on the tool?
Always use supplied guard when flex wheel is on tool. Wheel can shatter during use and guard helps to reduce chances of personal injury.
When installing or removing a flex wheel, what should I also use?
Follow instructions for depressed center grinding wheel/Multi-disc but also use plastic pad over wheel. See order of assembly on accessories page in this manual.
What accessories should I use when installing or removing an abrasive disc?
Use sander accessories specified in this manual. These must be purchased separately.
How do I mount the rubber pad when installing or removing an abrasive disc?
Mount the rubber pad onto the spindle. Fit the disc on the rubber pad and screw the lock nut onto the spindle. To tighten the lock nut, press the shaft lock firmly so that the spindle cannot revolve, then use the lock nut wrench and securely tighten clockwise.
Is it necessary to force the tool?
It should never be necessary to force the tool. The weight of the tool applies adequate pressure. Forcing and excessive pressure could cause dangerous wheel breakage.
What should I do if the tool is dropped while grinding?
Always replace wheel if tool is dropped while grinding.
What should I avoid when working?
Avoid bouncing and snagging the wheel, especially when working corners, sharp edges etc. This can cause loss of control and kickback.
What should I always do after operation?
After operation, always switch off the tool and wait until the wheel has come to a complete stop before putting the tool down.
How should I hold the tool during grinding and sanding operation?
Always hold the tool firmly with one hand on rear handle and the other on the side handle. Turn the tool on and then apply the wheel or disc to the workpiece.
What angle should I keep the edge of the wheel or disc at to the workpiece surface?
In general, keep the edge of the wheel or disc at an angle of about 15 degrees to the workpiece surface.
What direction should I avoid during the break-in period with a new wheel?
During the break-in period with a new wheel, do not work the grinder in the B direction or it will cut into the workpiece. Once the edge of the wheel has been rounded off by use, the wheel may be worked in both A and B direction.
What should I check when operating with a wire cup brush?
Check operation of brush by running tool with no load, insuring that no one is in front of or in line with brush.
What kind of brush should I avoid using?
Do not use brush that is damaged, or which is out of balance. Use of damaged brush could increase potential for injury from contact with broken brush wires.
What should I mount to the spindle when using a wire cup brush?
When using wire cup brush, mount urethane washer to the spindle. It will make it easier to remove wire cup brush.
What should I check when operating with a wire wheel brush?
Check operation of wire wheel brush by running tool with no load, insuring that no one is in front of or in line with the wire wheel brush.
What should I always use with wire wheel brushes?
Always use guard with wire wheel brushes, assuring diameter of wheel fits inside guard. Wheel can shatter during use and guard helps to reduce chances of personal injury.
What should I avoid when using a wire wheel brush?
When using wire wheel brush, avoid applying too much pressure which causes over bending of wires, leading to premature breakage.
What should I always be sure of before attempting to perform inspection or maintenance?
Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance.
How do I maintain the tool?
The tool and its air vents have to be kept clean. Regularly clean the tool’s air vents or whenever the vents start to become obstructed.
When should the carbon brushes be replaced?
When the resin insulating tip inside the carbon brush is exposed to contact the commutator, it will automatically shut off the motor. When this occurs, both carbon brushes should be replaced. Keep the carbon brushes clean and free to slip in the holders. Both carbon brushes should be replaced at the same time. Use only identical carbon brushes.
How do I replace the carbon brushes?
Use a screwdriver to remove the brush holder caps. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps.
Who should perform repairs, maintenance, or adjustments?
To maintain product safety and reliability, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
What accessories or attachments are recommended for use?
These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
What should I be sure to obtain and use if I decide to use approved accessories?
If you decide to use your Makita grinder with approved accessories which you purchase from your Makita distributor or factory service center, be sure to obtain and use all necessary fasteners and guards as recommended in this manual. Your failure to do so could result in personal injury to you and others.
Where can I ask for assistance for more details regarding the accessories?
If you need any assistance for more details regarding these accessories, ask your local Makita service center.
Table 1: Minimum gage for cord
Ampere Rating Volts Total length of cord in feet 120 V 25 ft. 50 ft. 100 ft. 150 ft.
More Than Not More Than AWG
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
CLICK HERE TO DOWNLOAD MAKITA 9067DB (02) PDF MANUAL