MAD DOG GK960W (01) PDF Document

To restore your MAD DOG GK960W to its default factory settings, hold the Fn+Esc hotkey combination for 5 seconds.

First, select the Key Binding section located on the left side of the app. Using the keyboard visualization, select the key for which the function is to be altered. Then, click Keyboard or Mouse and select the new key function to be assigned. To confirm, press the Save icon. To return the key to its default function, press the Reset Key icon.

Using the keyboard visualization, select the key you want to change, then click the Multimedia option at the bottom of the screen. Pick the desired function from the options provided. To confirm the change, press the Save icon. To restore the default settings, click on the key and select Reset key.

Select the key you wish to modify in the keyboard visualization, then click the Macro option at the bottom of the screen. Choose the desired macro from your list and press the Save icon to confirm. You can also configure the number of repetitions (between 1 and 65535), set it to repeat while the key is pressed, or choose to repeat until any other button is pressed.

Select Macro Editor from the main menu. Press the plus icon to create a new macro and assign it a name. Click Record to begin, press your desired combination of keys, and select Stop Recording when finished. You can edit the timing of each operation by double-clicking it and entering a value between 1 and 65280 ms. To edit an existing macro, select it from the list to modify or delete specific combinations.

In the keyboard visualization, select the key you wish to change and click the Commands option at the bottom of the screen. Select the specific command you want to assign and press the Save icon to confirm. To revert to defaults, click the key and select Reset key.

Select the target key in the visualization and click the Key combination option at the bottom of the screen. Define your desired hotkey combination and press Save. If you need to revert the change, click the key and select Reset key.

Select Backlight mode in the main menu to choose from a list of pre-configured modes. Depending on the mode selected, you can adjust settings such as brightness, speed, and color. You can also define custom colors by selecting the Own mode, then clicking on specific keys within the program to apply that color.

Select the Backlight to the rhythm of music mode from the menu and choose one of the available presets. Move the slider located below the virtual keyboard to the ON position. You can further customize this mode using the configuration panel displayed beneath the virtual keyboard.