Free English LUNIX LX7 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LUNIX LX7 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is included in the box with the LUNIX LX7?
The package contains the following items:
1x Hand Massager
1x Finger Massager
1x USB Charging Cable
1x Travel Bag
1x User Manual
What are the technical specifications of the LUNIX LX7?
Product Name: Hand Massager
Model: LX7
Power: 5W
Weight: 2.5 lbs / 1.1kg
Voltage: DC 3.7V
Battery: Lithium
Dimension: 11.8 x 6.3 x 4.7 in / 30 x 16 x 12 cm
What steps should be taken before using the LUNIX LX7 for the first time?
After unpacking the hand massager, check the integrity of the device and accessories for any damages.
Before first use, charge the massager until the blue level indicator stops blinking.
Place the device on a flat, level surface.
Remove all sharp jewelry before use.
Insert one hand into the cloth-lined chamber.
Press the Power Button, then the Program Button to start the massage.
How do I charge the LUNIX LX7?
You should see a blue battery charge level indicator blinking while charging. Once the battery is fully charged, the level indicator stops blinking. To charge the massager, connect the USB cable between the massager port and any USB plug (laptop, wall plug, etc.).
Important: Please fully charge the hand massager before the first use. Keep in mind that you cannot use the massager while plugged-in due to safety reasons.
How long does it take to charge the LUNIX LX7?
Using 5V / 1A: Around 7 hours.
Using 5V / 2A: Around 4 hours.
What is the working time of the LUNIX LX7 after a full charge?
Normal Use: Around 3 hours.
With Heat & Vibration: Around 2 hours.
What safety precautions should be followed when charging the LUNIX LX7?
Never charge the device with a USB plug or charging cable that exceeds 5V 2A as it could cause fire.
Make sure the USB cable fits entirely into the port.
This device should only be used with the provided USB cable.
Do not let the device charge overnight or during the whole day.
Make sure you avoid wooden surfaces while charging.
If the USB cable is damaged, do not charge the unit.
Do not leave the product unattended when plugged in. Unplug from outlet when not in use.
Do not attempt to disassemble or repair the unit, charging cord or screen.
How do I operate the Power Button on the LUNIX LX7?
POWER ON: Long press the power button (located on the bottom of the black screen) for 2 seconds. The hand massager will switch on, and the power button will turn blue.
Alternatively, short press the power button once; the power indicator will turn red. Then long press the same button for 2 seconds; the hand massager will switch on, and the power button will turn blue. Then press the program button (the white hand), and the hand massager will start to work.
POWER OFF: Press the power button one time in order to shut down the device. The blue power button will change color to red and the airbags will progressively deflate. After a few seconds, the red power indicator will disappear.
How do I use the Program Mode on the LUNIX LX7?
When turning the unit on, the display will show a white hand icon, signifying that the program mode is on standby. Each program massages & releases pressure on different parts of the hand, palm & fingers depending on your hand shape.
You can select your favorite program mode by pressing the program button (white hand icon) to choose between 4 different programs:
1. Full Hand Massage
2. Fingers & Palm Massage
3. Wrist Massage
4. Heat Massage
How do I operate the Heat function on the LUNIX LX7?
Press the heat button to turn ON/OFF the temperature. When the HEAT option is activated, ON in red will be displayed on the screen. If you press the button a second time, the HEAT function will be activated.
Please keep in mind that the heat function reaches the optimal temperature after 5/10 minutes of use. The heat function provides a gentle warmth, around 104°F / 40°C.
If you want to feel more heat, it is recommended to wear a pair of gloves to help blood circulation.
How do I operate the Vibration function on the LUNIX LX7?
Press the vibration button to activate the vibration mode. When the option is activated, the red light above the button will turn on.
The LUNIX LX7 hand massager provides 2 different modes: pulse mode and continuous mode. Press the button several times to switch between the modes.
How do I adjust the Intensity on the LUNIX LX7?
Use the intensity button to increase or decrease the intensity level by pressing the button. There are 6 different levels of intensity from the weakest (1 white light) to the strongest (6 red lights).
It is strongly recommended that people with very sensitive hands use the lowest intensity level (one white light), as a higher intensity may be uncomfortable.
How do I use the Timer on the LUNIX LX7?
When pressing the timer button, it allows you to choose between 15, 20, and 30-minute sessions. Each time you press the button, it will change the time session. The hand massager automatically shuts off when the time has expired.
How do I use the included Finger Massager?
Put your finger in the middle of the roller and scroll back and forth to enjoy a wonderfully comfortable massage.
What are the Care, Maintenance, and Cleaning Instructions for the LUNIX LX7?
Store the Hand Compression Massager in a cool and dry place when not in use.
Do not place the unit into any type of liquid.
Keep away from all solvents and harsh detergents.
After use, wipe with a soft, damp cloth using non-abrasive cleaners.
What troubleshooting steps should I follow if I encounter issues with the LUNIX LX7?
| PROBLEM | POSSIBLE CAUSE | SOLUTION |
|---|---|---|
| I am unable to start the unit | The unit did not start properly OR battery is low | Press the Power Button for 2sec OR recharge the unit |
| The massage pressure is too low | Battery is low OR intensity level is too low | Recharge the unit OR increase intensity level |
| The massage pressure is too strong | You are using an Intensity level that is too high OR your hands are not correctly positioned inside the unit | Use I1 Intensity OR try to adjust your hand in the unit to feel comfortable |
| My unit suddenly stopped working | Power outage OR massage more than 15min OR long working time, the unit has been shut off due to overheating protection | The unit automatically shuts off after 15min of use. Use the unit after the motor has been naturally cooled |
| I hear a faint sound while using the massager | The air pump is working | Normal behavior |
| The airbags are not inflating | Battery is low | Recharge the unit. If the problem persists, please contact support |
| I cannot see the blue light flashing while charging OR the unit turns on for a few seconds, then all the lights flash and the unit powers down | The unit is not charging properly because the connection is not made properly between the usb port and usb cable OR the plug is higher than 5V 2A | The usb cable needs to fit entirely into the USB port OR the plug must not exceed 5V 2A |
| How do I know when the unit is fully charged? | The blue battery charge level indicator stops blinking once the unit is fully charged | |
| Unit stopped charging | Unit not receiving the correct amount of voltage | Make sure the charger you used is 5V 2A and the charger (plug or laptop) must not exceed 5V |
| The display is constantly turning on and off making a beeping noise | PCB problem | Contact support for further assistance |
| Heat function not working | Unit not fully charged and the heat option takes some time to achieve the highest temperature | Wait at least 10-12min before feeling the heat and you can also wear a regular pair of thin gloves; thus, you can increase the heat-feeling |
| Unit changing intensity programs | PCB defective | Contact support for further assistance |
| Unit is hot | Excessive use | Power off the unit and let it cool before further use |
What usage recommendations are suggested to feel the benefits of the massage?
Use the LUNIX LX7 Full Hand Compression Massager one or two sessions every day from 10 to 15 minutes for at least 7 days in a row in order to feel the benefits of the massage.
CLICK HERE TO DOWNLOAD LUNIX LX7 (01) PDF DOCUMENT