Free English LOREX N881 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LOREX N881 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What items are included in the package contents of the LOREX N881?
The package contents of the LOREX N881 include:
1. 4K Ultra HD Security NVR
2. Power Cable
3. Ethernet Cable
4. USB Mouse
5. HDMI Cable
| Item Number | Included Package Item |
|---|---|
| 1 | 4K Ultra HD Security NVR |
| 2 | Power Cable |
| 3 | Ethernet Cable |
| 4 | USB Mouse |
| 5 | HDMI Cable |
What are the physical dimensions of the LOREX N881?
The physical dimensions of the LOREX N881 are as follows:
Width: 14.7 inches (375 mm)
Depth: 12.9 inches (327 mm)
Height: 2.1 inches (53 mm)
| Dimension | Imperial | Metric |
|---|---|---|
| Width | 14.7 inches | 375 mm |
| Depth | 12.9 inches | 327 mm |
| Height | 2.1 inches | 53 mm |
Why should you test cameras prior to permanent mounting with the LOREX N881?
You should test your cameras prior to selecting a permanent mounting location by temporarily connecting the cameras and cables to the LOREX N881 NVR to ensure functionality before finalizing installation.
What are the two methods for connecting cameras to the LOREX N881?
The two methods for connecting cameras to the LOREX N881 are:
Method a: Connect cameras directly to the recorder (recommended).
Method b: Connect cameras to a PoE switch or router on your network (switch/router not included).
How long does it take for cameras to start up and transmit video to the LOREX N881?
It may take up to 1 minute for cameras to start up and transmit video to the LOREX N881 recorder.
What is required when connecting cameras to a router or network switch without PoE for the LOREX N881?
Connecting cameras to a router, or to a network switch without PoE, requires a power adapter for each camera.
What network configuration is required when using an external PoE switch with the LOREX N881?
If you are using a PoE switch, you must ensure that the switch is connected to the same network as the LOREX N881 recorder.
How do you connect a monitor to the LOREX N881?
Connect the LOREX N881 recorder to a monitor using either the included HDMI cable or an optional VGA cable (not included).
What video resolutions are supported by the display output ports on the LOREX N881?
The display output ports on the LOREX N881 support the following resolutions:
HDMI port: Supports up to 4K resolution.
VGA port: Supports up to 1080p resolution.
Why is it important to set the output resolution on the LOREX N881?
To optimize picture quality, you must set the video output of the LOREX N881 to match the native resolution of your monitor.
How do you connect the LOREX N881 to a local router?
Connect the LOREX N881 recorder to your router using the included Ethernet cable.
What are the internet connection speed requirements for remote viewing with the LOREX N881?
A high-speed Internet connection is required to receive automatic firmware updates and enable remote viewing with mobile apps:
Minimum upload speed of 5Mbps is required for 4K viewing.
Minimum upload speed of 3.5Mbps is required for lower resolutions.
Can the LOREX N881 be operated without an active internet connection?
Yes. Except for automatic firmware updates and remote viewing with mobile apps, all other system features of the LOREX N881 can be used without an Internet connection.
How do you connect the mouse to the LOREX N881?
Connect the included mouse to a USB port located on the LOREX N881 recorder.
How do you connect power and start up the LOREX N881?
Use the included power adapter to connect the LOREX N881 recorder to a nearby electrical outlet, and then turn the recorder on using the power switch on the back panel.
What happens when you first power up the LOREX N881?
When you first power up the LOREX N881 recorder, the Lorex Setup Wizard will begin. The Wizard assists you with configuring core system settings and creating a secure password.
What are the six initial setup steps for the LOREX N881?
The six initial physical setup steps for the LOREX N881 are:
STEP 1: Connect cameras directly or via network PoE switch/router.
STEP 2: Connect monitor via HDMI or VGA.
STEP 3: Connect router using the Ethernet cable.
STEP 4: Connect mouse to a USB port.
STEP 5: Connect power to an outlet and switch on the power button.
STEP 6: Complete the Lorex Setup Wizard.
What devices connect to the Alarm Block on the LOREX N881?
The Alarm Block on the rear panel of the LOREX N881 is used to connect external alarm devices.
What devices connect to the RS232 port on the LOREX N881?
The RS232 port on the rear panel of the LOREX N881 is used to connect access control systems.
What devices connect to the Audio In and Audio Out ports on the LOREX N881?
The Audio In and Audio Out ports on the LOREX N881 are used to connect an external microphone and speaker.
How do you quickly open the system information window on the LOREX N881?
To quickly open the window displaying vital system information on the LOREX N881, use either of the following two methods:
Method 1: Press the Info button located on the front panel of the recorder.
Method 2: Right-click on the screen to open the Quick Menu and click Info.
What details are shown in the Quick Access system information window on the LOREX N881?
The system information window on the LOREX N881 displays vital information including the device ID, model number, firmware version, and IP address.
How does the left mouse button function on the LOREX N881?
The left mouse button functions as follows on the LOREX N881:
During split-screen display mode: Click an individual channel to view in full-screen. Click again to return to split-screen display mode.
While navigating menus: Click to open a menu option.
How does the mouse scroll wheel function on the LOREX N881?
During live view on the LOREX N881, use the mouse scroll wheel to zoom in and zoom out.
How does the right mouse button function on the LOREX N881?
The right mouse button functions as follows on the LOREX N881:
During live view: Click anywhere on the screen to open the Quick Menu.
While navigating menus: Click to exit menus.
How do you open and close the Navigation Bar in live view on the LOREX N881?
In live view on the LOREX N881, hover the mouse cursor over the top of the screen to open the Navigation Bar. Move the mouse cursor away from the top of the screen to close the Navigation Bar.
What options are available in the Quick Menu of the LOREX N881?
The Quick Menu of the LOREX N881 includes the following actions:
a. Select camera/live display view.
b. Control PTZ cameras (not included).
c. Control auto focus cameras (not included).
d. Adjust camera color and image settings.
e. View system information.
f. Start/stop sequence mode.
g. Temporarily disable all current audible warnings.
h. Search and play back recordings.
i. Search and play back person / vehicle detection events.
j. Open manual recording controls.
k. Add IP cameras over the LAN.
l. Open Main Menu.
| Menu Option | Function |
|---|---|
| a | Select camera / live display view |
| b | Control PTZ cameras |
| c | Control auto focus cameras |
| d | Adjust camera color and image settings |
| e | View system information |
| f | Start / stop sequence mode |
| g | Temporarily disable all current audible warnings |
| h | Search and play back recordings |
| i | Search and play back person / vehicle detection events |
| j | Open manual recording controls |
| k | Add IP cameras over the LAN |
| l | Open Main Menu |
How do you temporarily disable audible warnings on the LOREX N881?
To temporarily disable all current audible warnings on the LOREX N881, right-click on the live viewing screen to open the Quick Menu, then select the Disable Beep option (icon g).
How do you add IP cameras from the Local Area Network (LAN) to the LOREX N881?
To add cameras that are not directly connected to the PoE ports of the LOREX N881:
Step 1. Connect the camera to a router or switch on the same network as the recorder.
Step 2. Right-click and select Device Search. If prompted, log in using the system user name (default: admin) and your secure password.
Step 3. Configure the following:
a. Click Device Search.
b. Check the camera(s) you would like to add.
c. Click Add. The status indicator turns green to show the camera is successfully connected.
d. The added device(s) will appear in the Added Device list. Right-click to exit to live view.
What should you do if an added camera shows a red status indicator on the LOREX N881?
If the icon in the Status column appears red on the LOREX N881, there may be a password issue with the camera. Select the camera in the list and click Reconnect IPC.
What is the default user name for logging into the LOREX N881?
The default system user name for logging into the LOREX N881 is admin.
How do you search for and play back video recordings on the LOREX N881?
To search through and play back recordings on the LOREX N881:
Step 1. From live view, right-click and then click Playback. If prompted, log in using the system user name (default: admin) and your secure password.
Step 2. Configure the playback options:
a. Use the calendar on the right to select the date to playback.
b. Check the channels you want to play back. Click the grey icon beside each selected channel to select Main Stream (M) or Sub Stream (S) video quality.
c. Click inside the video bar to select the playback time. Playback starts immediately at the selected time.
How do you toggle between Main Stream and Sub Stream video quality during playback on the LOREX N881?
In the Playback menu of the LOREX N881, select your channel and click the grey icon beside each selected channel to toggle between Main Stream (M) and Sub Stream (S) quality.
How do you back up recordings to a USB drive on the LOREX N881?
To back up recordings from the hard drive to a USB flash drive using the LOREX N881:
Step 1. Insert a USB flash drive (not included) into a free USB port on the recorder.
Step 2. From live view, right-click and then click Main Menu. If prompted, log in using the system user name (default: admin) and your secure password.
Step 3. Click the storage/system icon, then click BACKUP.
Step 4. Configure the following:
a. Select the type and quality of recordings to search for.
b. Select the channel(s) to search by.
c. Select a Start Time and End Time for your search.
d. Choose a file format for your backed up files.
e. Click Add to see recordings that match your search.
f. Check the boxes next to the recordings you want to back up, then click Start. Alternatively, click Onekey Backup to back up all files that match your search.
What is the function of Onekey Backup on the LOREX N881?
On the LOREX N881 Backup screen, clicking Onekey Backup allows you to immediately back up all files matching your search criteria without having to manually select each individual check box.
How does the LOREX N881 handle monitor output resolution upon initial setup?
The LOREX N881 system will automatically match the resolution of the connected monitor the first time you use the recorder.
What precaution must you take before switching monitors on the LOREX N881?
If you need to switch the monitor connected to the LOREX N881, make sure you set the recorder to an output resolution supported by the new monitor before making the switch.
How do you change the video output resolution on the LOREX N881?
To change the output resolution on the LOREX N881:
Step 1. From live view, right-click and then click Main Menu. If prompted, log in using the system user name (default: admin) and your secure password.
Step 2. Click Display, then configure the following:
a. Set Resolution to match the highest resolution supported by your monitor (e.g., select 3840×2160 for 4K monitors, or 1920×1080 for 1080p monitors).
b. Click OK. The recorder will restart before the resolution changes take effect.
Does the LOREX N881 restart when changing the output resolution?
Yes, after setting the resolution and clicking OK, the LOREX N881 recorder will restart before changes take effect.
How many channels support person/vehicle detection simultaneously on the LOREX N881?
A maximum of 8 channels will support person/vehicle detection at once on the LOREX N881.
How do you configure Advanced Person/Vehicle Detection on the LOREX N881?
To configure advanced person and vehicle detection on the LOREX N881:
Step 1. In live view, right-click and click Main Menu. If prompted, log in using the system user name (default: admin) and your secure password.
Step 2. Click the Event icon, then select the SMD/Deterrence tab.
Step 3. Configure the following settings under Option 1:
a. Select the channel of a connected camera with person and vehicle detection.
b. Check Enable next to Smart Motion Detection.
c. Check Enable next to Person and/or Vehicle.
d. Click Set next to Area to set active areas for person and/or vehicle detection.
e. Click Set next to Schedule to set a weekly schedule for person and/or vehicle detection.
f. Set preferences for the warning light and siren.
g. Click OK.
How do you set the detection area for person and vehicle detection on the LOREX N881?
To configure the detection area on the LOREX N881:
1. Click Add to set an area for person or vehicle detection on the selected channel.
2. Click and drag the corners to resize the area.
3. For the most accurate results, define an area where objects of interest will move within the bounding box as well as into and out of it.
4. Check Light next to a rule to flash the camera warning light when an object is detected.
What is the default schedule for person and vehicle detection on the LOREX N881?
The default schedule for person and vehicle detection on the LOREX N881 is active during the night, between 5:00 PM and 7:00 AM.
How do you adjust the schedule for person and vehicle detection on the LOREX N881?
In the SMD/Deterrence schedule settings of the LOREX N881, click Set to change the schedule for the corresponding day of the week, then click OK when finished.
How do you configure Active Deterrence Cameras on the LOREX N881?
To configure active deterrence cameras on the LOREX N881:
Step 1. In live view, right-click and click Main Menu. If prompted, log in using the system user name (default: admin) and your secure password.
Step 2. Click the Event icon, then select the SMD/Deterrence tab.
Step 3. Configure the following settings under Option 2:
a. Select the channel of a connected deterrence camera.
b. Check Enable.
c. Click Set next to Area to set active areas for person and/or vehicle detection.
d. Click Set next to Schedule to set a weekly schedule.
e. Set preferences for the warning light and siren.
f. Set Sensitivity and Threshold levels to your preference.
g. Click OK.
How do you configure the deterrence area grid on the LOREX N881?
When configuring the deterrence area on the LOREX N881:
1. The camera image appears with a grid overlay. The green area represents the active area for deterrence.
2. Click or click-and-drag to add or remove boxes from the active area.
3. Right-click when finished to save the area layout.
How do you trigger all connected deterrence cameras warning lights and sirens manually on the LOREX N881?
To set off all connected deterrence cameras’ warning lights and sirens at once, press and hold the ESC button on the front panel of the LOREX N881 recorder for 3 seconds.
How do you search for person and vehicle detection events specifically on the LOREX N881?
Right-click anywhere on the live viewing screen of the LOREX N881 to open the Quick Menu, then click the Smart Search icon (icon i) to search for and play back person and vehicle detection events.
What does sequence mode do and how do you toggle it on the LOREX N881?
Sequence mode cycles through camera views automatically. To start or stop sequence mode on the LOREX N881, right-click on the live viewing screen to bring up the Quick Menu and select the Sequence option (icon f).
How do you access manual recording controls from live view on the LOREX N881?
To access manual recording controls on the LOREX N881, right-click on the live viewing screen to open the Quick Menu, then select Manual (icon j) to open the manual recording controls.
How do you open the Main Menu on the LOREX N881 using the Quick Menu?
Right-click on the live viewing screen of the LOREX N881 to open the Quick Menu, and click the Main Menu option (icon l) at the bottom of the list.
Can the LOREX N881 control motorized PTZ and auto focus cameras?
Yes. By opening the Quick Menu on the LOREX N881, you can select option b to control PTZ cameras or option c to control auto focus cameras (cameras sold separately).
Where do you find the power switch on the LOREX N881 recorder?
The power switch is located on the back panel of the LOREX N881 recorder.
What should you do after creating a secure password in the Lorex Setup Wizard on the LOREX N881?
For future reference, record your secure password in a secure place so it is readily available for future system logins on the LOREX N881.
CLICK HERE TO DOWNLOAD LOREX N881 (01) PDF DOCUMENT