LG ULTRAGEAR 27GS60QC (01) PDF MANUAL

Always use genuine LG components to ensure safety and product performance.

The product warranty will not cover damage or injury caused by the use of unauthorized components.

It is recommended that use the supplied components.

The product figures and screen displays used in this manual are examples to help consumers use the product and may differ from the actual product.

Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)

Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.

Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand and could result in personal injury.

When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen may cause damage to it.

For wave pattern on appearance, unlike the general method of coating, it’s applied to added glittering material in raw material. With no peeled-off appearance, it has good durability. Please use it with confidence because there is no problem in using the product at all.

The components may look different from those illustrated.

Without prior notice, all product information and specifications contained in the manual are subject to change to improve the performance of the product.

To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer from which you purchased the product.

The power cord provided may differ depending upon the region.

Follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation:

Place the monitor in the original box or packing material before attempting to move it.

Before moving or lifting the monitor, disconnect the power cord and all other cables.

Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.

When holding the monitor, the screen should face away from you to prevent it from being scratched.

When transporting the monitor, do not expose the monitor to shock or excessive vibration.

When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.

Avoid touching the monitor screen as much as possible, as this may result in damage to the screen or pixels.

If you use the monitor panel without the stand base, its joystick button may cause the monitor to become unstable and fall, resulting in damage or injury, and potentially causing the joystick button to malfunction.

Lift the monitor and place it on the table in an upright position.

Place the monitor at least 100 mm (3.9 inches) away from the wall to ensure sufficient ventilation.

CAUTION:

Unplug the power cord before moving or installing the monitor to avoid electric shock.

Make sure to use the power cord provided in the product package and connect it to a grounded power outlet.

If you need another power cord, please contact your local dealer or the nearest retail store.

Connect the monitor to a table using the Kensington security system cable.

For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website at http://www.kensington.com.

The Kensington security system is optional. You can obtain optional accessories from most electronics stores.

This monitor meets the specifications for the wall mount plate or other compatible devices (100 x 100 mm).

Install the monitor at least 100 mm (3.9 inches) away from the wall and leave about 100 mm (3.9 inches) of space at each side of the monitor to ensure sufficient ventilation.

Detailed installation instructions can be obtained from your local retail store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.

Installing the Wall Mount Plate:

When installing the monitor on a wall, attach the Wall mount plate (optional) to the back of the monitor using the wall mount bracket cover provided with the monitor.

Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.

Components needed:

A: Monitor

B: Wall mount bracket Cover

C: Screw (M4 x L17)*

D: Wall mount bracket (optional)

*Make sure to use the screws (M4 x L17) provided with the monitor instead of those on the wall mounting plate when installing.

Wall Mount Specifications:

Wall Mount (mm): 100 x 100 (3.9 x 3.9 inches)

Standard screw: M4 x L10* (Use M4 x L17 provided with the monitor)

Number of screws: 4

Wall Mount Plate (Optional): LSW149

Notes:

Use the screws specified by VESA standards.

The wall mount kit includes the installation guide and all necessary parts.

The wall mounting bracket is optional. Obtain optional accessories from your local dealer.

The length of the screw may differ for each wall mounting bracket. Using screws longer than the standard length (M4 x L17 for this monitor, maximum 12mm penetration) may damage the inside of the product.

Refer to the user manual for the wall mounting bracket for more information.

Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the screen.

Remove the stand before installing the monitor on a wall mount by performing the stand attachment in reverse.

CAUTION:

Unplug the power cord before moving or installing the monitor to avoid electric shock.

Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.

To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.

Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.

Use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or misuse of inappropriate components will not be covered by the product warranty.

When measured from the back of the monitor, the length of each installed screw must be 12 mm (0.4 inches) or less.

You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/down with your finger.

Basic Functions:

A (Power on): Press the joystick button once with your finger to turn on the monitor.

B (Power off): Press and hold the joystick button once more than 5 seconds with your finger to turn off the monitor.

C (Volume control): You can control the volume by moving the joystick button left/right.

D: Enters the [Accessibility] menu.

1. Place the monitor mounted on the stand base in an upright position.

2. Adjust the angle of the screen.

The angle of the screen can be adjusted forward or backward from -5° to 22° for a comfortable viewing experience.

WARNING:

To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as illustrated.

Be careful not to touch or press the screen area when adjusting the angle of the monitor.

You can download and install the latest version from the LGE website (www.lg.com).

Monitor Driver / OnScreen Control / Dual Controller

Illustrations in the manual may differ from the actual product.

Press the joystick button, go to [Menu] > [Input], and then select the input option.

CAUTION:

If you use generic cables not certified by LG, the screen may not display or there may be image noises.

Do not press the screen for a prolonged time. This may cause image distortion.

Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a PC screensaver if possible.

When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power outlet.

The monitor may flicker when turned on in an area where the temperature is low. This is normal.

Sometimes red, green, or blue spots may appear on the screen. This is normal.

Make sure to use the supplied cable of the product. Otherwise, this may cause the device to malfunction.

This monitor supports the Plug and Play feature, which allows you to add a device to your computer without needing to reconfigure or install manual drivers.

HDMI Connection:

Transmits digital video and audio signals from your PC to the monitor.

Note:

Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.

Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

Recommended HDMI cable types:

High Speed HDMI®/™ cable

High Speed HDMI®/™ cable with Ethernet

DisplayPort Connection:

Transmits digital video and audio signals from your PC to the monitor.

Note:

There may be no video or audio output depending on the DP (DisplayPort) version of the PC.

If you are using a Mini DisplayPort output graphics card, use a Mini DP to DP (Mini DisplayPort to DisplayPort) cable or gender that supports DisplayPort 1.4. (Sold separately)

HDMI Connection:

HDMI transmits digital video and audio signals from your AV device to the monitor.

Note:

Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.

Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

Recommended HDMI cable types:

High Speed HDMI®/™ cable

High Speed HDMI®/™ cable with Ethernet

Headphones Connection:

Connect peripherals to the monitor via the headphones port.

Note:

Peripheral devices are sold separately.

Depending on the audio settings of the PC and external device, headphones and speaker functions may be limited.

If you use angled earphones, it may cause a problem with connecting another external device to the monitor. Therefore, it is recommended to use straight earphones (Recommend Straight type over Angled type).

Your monitor’s OSD (On Screen Display) may differ slightly from that shown in the manual.

When [Beep Guide] is activated, pressing the joystick button will take you to [Menu] right away.

Activating the Main Menu:

1. Press the joystick button on the bottom of the monitor.

2. Move the joystick up/down and left/right to set the options.

Main Menu Features:

Press the joystick button at the bottom of the monitor to access the main menu:

A: [Power Off] – Turns off the monitor.

B: [Input] – Sets input mode.

C: [Game Mode] – Sets the game mode for gaming.

D: [Menu] – Enters the main OSD menu to configure screen settings.

E: [Exit] – Exits the main menu.

Menu Settings Navigation:

1. To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the [Menu].

2. Move the joystick up/down and left/right to set the options.

3. To return to the upper menu or set other menu items, move the joystick to the left (◄) or press the joystick button.

4. If you want to exit the OSD menu, move the joystick to the left (◄) until you exit.

Main Menu Categories: [Game Adjust], [Picture Adjust], [Input], [General]

Located under [Menu] > [Game Adjust] > [Game Mode].

[Game Mode] on SDR (Non-HDR) signal:

[Gamer 1]/[Gamer 2]: Allows saving two sets of customized display settings, including game-related options.

[FPS]: Optimized for FPS games. Suitable for very dark FPS games.

[RTS]: Optimized for RTS Game.

[Vivid]: Optimized the screen for vivid colors.

[Reader]: Optimizes the screen for reading documents. Brightness can be adjusted in the OSD menu.

[HDR Effect]: Optimizes the screen for high dynamic range simulation.

[Color Weakness]: For users who cannot distinguish between red and green. Helps distinguish between the two colors. Turn off if uncomfortable. May not distinguish some colors in some images.

[Game Mode] on HDR signal:

[Gamer 1]/[Gamer 2]: Allows saving two sets of customized display settings, including game-related options.

[FPS]: Optimized for FPS games. Suitable for very dark FPS games.

[RTS]: Optimized for RTS Game.

[Vivid]: Optimized the screen for vivid colors.

Notes:

Available [Game Mode] options depend on the Input signal.

Changing [Game Mode] in DP (DisplayPort) input might cause screen flicker or affect PC screen resolution.

HDR content may not display correctly depending on Windows 10 OS settings; check HDR On/Off settings in Windows.

When HDR is on, characters or picture quality may be poor depending on Graphic card performance.

While HDR is on, screen flickering or cracking might occur when changing monitor input or power on/off depending on Graphic card performance.

For information on graphics card and game HDR support, visit their manufacturer’s website.

Located under [Menu] > [Game Adjust].

[FreeSync]/ [Adaptive-Sync]: Provides seamless and natural images in gaming. Screen flickering may occur intermittently in specific gaming environments.

[Extended]: Enables wider frequency range.

[Basic]: Enables basic frequency range.

[Off]: Disables the feature.

Supported Interface: DisplayPort (Adaptive-Sync), HDMI (FreeSync).

Supported Graphic Card: Requires a graphic card supporting AMD’s FreeSync.

Supported Version: Update the graphic card to the latest driver. Refer to AMD website (www.amd.com) for details.

[Black Stabilizer]: Controls black contrast for better visibility in dark scenes.

[Response Time]: Sets response time based on screen speed.

[Faster]: Sets response time to faster. Recommended for fast-moving pictures. Motion Blur may occur depending on content.

[Fast]: Sets response time to fast. Recommended for normal environment.

[Normal]: Sets response time to normal.

[Off]: Disables the feature.

[Crosshair]: Provides a mark on the center of the screen for FPS games. Select from four different crosshairs.

[FPS Counter]:

[On]: Displays an indicator on the upper left screen showing the actual frame rate received at the input.

[Off]: Does not use the FPS Counter feature.

Note: [FPS Counter] and [Crosshair] cannot be used simultaneously.

[Game Reset]: Returns game settings to default.

Located under [Menu] > [Picture Adjust].

[Brightness]: Adjusts screen brightness.

[Contrast]: Adjusts screen contrast.

[Sharpness]: Adjusts screen sharpness.

[Gamma]:

[Mode 1], [Mode 2], [Mode 3]: Higher gamma value makes the image darker; lower value makes it lighter.

[Mode 4]: Select if no gamma adjustment is needed.

[Color Temp]: Sets color temperature.

[Custom]: User can customize Red, Green, Blue colors.

[Warm]: Sets screen color to a reddish tone.

[Medium]: Sets screen color between red and blue tone.

[Cool]: Sets screen color to a bluish tone.

[Manual]: User can fine-tune the color temperature.

[R/G/B]: Customize picture color using Red, Green, and Blue colors.

[Six Color]: Adjust hue and saturation of six colors (red, green, blue, cyan, magenta, yellow).

Hue: Adjusts the tone of screen colors.

Saturation: Adjusts saturation. Lower value = less saturated, brighter. Higher value = more saturated, darker.

[Black Level]: Sets the offset level (for HDMI only).

Offset: The darkest color the monitor can display as a reference for video signal.

[High]: Keeps the current contrast ratio.

[Low]: Lowers black levels and raises white levels from the current contrast ratio.

[Picture Reset]: Returns picture and color settings to default.

Located under [Menu] > [Input].

[Input List]: Selects the input mode (e.g., HDMI, DisplayPort).

[Aspect Ratio]: Adjusts the screen’s aspect ratio. Display may look the same for [Full Wide] and [Original] at the recommended resolution (2560 x 1440).

[Full Wide]: Displays video in widescreen, regardless of input signal.

[Original]: Displays video according to the input signal’s aspect ratio.

Note: Menus may be disabled at the recommended resolution (2560 x 1440).

[Auto Input Switch]: When set to [On], the display automatically switches to a new input when connected.

Located under [Menu] > [General].

[Language]: Sets the menu screen language.

[User-defined Key 1]/ [User-defined Key 2]: Customize the main menu for easy access to preferred menus. These appear at the left/right of the main menu.

[SMART ENERGY SAVING]: Conserves energy using luminance compensation.

[High]: Saves energy using the high-efficiency feature.

[Low]: Saves energy using the low-efficiency feature.

[Off]: Disables the feature.

Note: Energy saving data may differ depending on panel/suppliers. Selecting [High] or [Low] may lower or raise monitor luminance depending on the source.

[Deep Sleep Mode]: Minimizes power consumption in standby mode when enabled.

[On]: Enables Deep Sleep Mode.

[Off]: Disables the feature.

[Automatic Standby]: Monitor automatically switches to standby mode if there is no operation for a certain period.

[Input Compatibility Version]: Set each input to match the supported version of the connected device.

[Buzzer]: Sets the sound generated from the Buzzer when the monitor powers on.

[OSD Lock]: Disables configuration and adjustment of menus. All features disabled except: [Brightness]/[Contrast] in [Picture Adjust], [Input], [OSD Lock]/[Information]/[Open Source Software License] in [General].

[Information]: Shows display information: [Total Power On Time], [Resolution].

[Open Source Software License]: Select [View] to check Open Source Software notice information.

[Reset to Initial Settings]: Returns settings to default.

Specifications are subject to change without notice. (~ means alternating current, — means direct current).

Color Depth: 8-bit color is supported.

Resolution:

Max Resolution:

2560 x 1440 @ 180 Hz (DisplayPort)

2560 x 1440 @ 144 Hz (HDMI)

Recommended Resolution:

2560 x 1440 @ 180 Hz (DisplayPort)

2560 x 1440 @ 144 Hz (HDMI)

Environmental Conditions:

Operating Conditions:

Temperature: 0 °C to 40 °C (32 °F to 104 °F)

Humidity: Less than 80 %

Storing Conditions:

Temperature: -20 °C to 60 °C (-4 °F to 140 °F)

Humidity: Less than 85 %

Dimensions: Monitor Size (Width x Depth x Height) (mm/inches):

27GS60QC/27GS60QX/27GS60QN:

With Stand: 604.9 x 226.5 x 450.7 (23.8 x 8.9 x 17.7)

Without Stand: 604.9 x 95.7 x 363.8 (23.8 x 3.7 x 14.3)

32GS60QC/32GS60QX:

With Stand: 699.9 x 226.5 x 508.1 (27.5 x 8.9 x 20)

Without Stand: 699.9 x 111.9 x 421.2 (27.5 x 4.4 x 16.5)

Weight (kg/lbs) (Without Packaging):

27GS60QC/27GS60QX/27GS60QN:

With Stand: 4.8 (10.5)

Without Stand: 3.5 (7.7)

32GS60QC/32GS60QX:

With Stand: 5.9 (13.0)

Without Stand: 4.6 (10.1)

AC/DC Adapter:

27GS60QC/27GS60QX/27GS60QN:

Model: ADS-45FSQ-19 19040EPG-1 / ADS-45FSQ-19 19040EPCU-1 / ADS-45SQ-19-3 19040E

Manufacturer: SHENZHEN HONOR ELECTRONIC CO., LTD

Input: 100-240V ~ 50/60 Hz, 1.2 A

Output: 19V — 2.1 A

32GS60QC/32GS60QX:

Model: MS-V2530R190-048LO-DE / MS-V2530R190-048L0-US

Manufacturer: JAMA Technology (HongKong) Co., Ltd

Input: 100-240 V ~ 50/60 Hz, 1.5 A

Output: 19 V — 2.53 A

Power Sources:

27GS60QC/27GS60QX/27GS60QN: Power Rating: 19V — 2.1 A

32GS60QC/32GS60QX: Power Rating: 19V — 2.3 A

Resolution	Horizontal Frequency (kHz)	Vertical Frequency (Hz)	Polarity (H/V)	Remarks
640 x 480	31.469	59.940	-/-
800 x 600	37.897	60.317	+/+
1024 x 768	48.363	60.000	-/-
1920 x 1080	67.500	60.000	+/+
2560 x 1440	88.787	59.951	+/-	Recommended Timing: HDMI1.4
2560 x 1440	111.857	74.971	+/-
2560 x 1440	182.996	119.998	+/-
2560 x 1440	218.290	143.991	+/-	Recommended Timing: HDMI2.0

Resolution	Horizontal Frequency (kHz)	Vertical Frequency (Hz)	Polarity (H/V)	Remarks
640 x 480	31.469	59.940	-/-
800 x 600	37.897	60.317	+/+
1024 x 768	48.363	60.000	-/-
1920 x 1080	67.500	60.000	+/+
2560 x 1440	88.787	59.951	+/-
2560 x 1440	150.919	99.946	+/-
2560 x 1440	182.996	119.998	+/-	Recommended Timing: DP1.2
2560 x 1440	222.151	143.973	+/-
2560 x 1440	264.540	179.959	+/-	Recommended Timing: DP1.4

Resolution	Horizontal Frequency (kHz)	Vertical Frequency (Hz)
480P	31.5	60
720P	45.0	60
1080P	67.5	60
1080P	135.0	120
2160P	135.0	60

Is the monitor’s power cord plugged in? Check if the power cord is correctly plugged into the power outlet.

Is the monitor’s adapter plugged in? Make sure to use the adapter provided in the product package.

If the monitor is in sleep mode (standby mode), move the mouse, or press any key on the keyboard, to switch the display on.

Check if the computer is turned on.

Is the monitor powered on? Check if the input setting is correct ([Menu] > [Input]).

Is the [The screen is not currently set to the recommended resolution.] message being displayed? This occurs when signals transferred from the PC (graphics card) are out of the recommended horizontal or vertical frequency range of the monitor. See the “PRODUCT SPECIFICATION” section to set the appropriate frequency.

Is the [No Signal] message being displayed? This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.

Is the [Out of Range] message being displayed? This occurs when signals transferred from the PC (graphics card) are out of the horizontal or vertical frequency range of the monitor. See the “PRODUCT SPECIFICATION” section to set the appropriate frequency.

Have you installed the display driver?

Be sure to install the display driver from the LG website: https://www.lg.com.

Make sure to check if the graphics card supports Plug and Play function.

Does image sticking occur even when the monitor is turned off?

Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image.

To extend the lifetime of the monitor, use a screensaver.

Did you select the appropriate resolution?

If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or the recommended resolution.

Not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or misalignment of the display.

The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of the graphics card. If this is the case, contact the manufacturer of the computer or graphics card for assistance.

Does the display appear discolored (16 colors)? Set the color to 24 bit (true color) or higher. (Settings may differ depending on the OS).

Does the display color appear unstable or monochrome? Check if the signal cable is connected properly. Reconnect the cable or reinsert the PC’s graphics card.

Are there spots on the screen? When using the monitor, pixilated spots (red, green, blue, white, or black) may appear. This is normal for an LCD screen and not an error or related to performance.

The OSD may be locked. Disable [OSD Lock] in [General].

Are images displayed without sound?

Make sure that the headphone port connections are made properly.

Try increasing the volume with the joystick.

Set the audio output of the PC to the monitor you are using. (Settings may differ depending on the OS).

Menu	Location	Menu	Location	Menu	Location
Game Adjust	1	Game Adjust – Crosshair – Red Cross	1 5 1	Picture Adjust – Color Temp – Custom	2 5 1
Game Adjust – Game Mode – Gamer 1	1 1 1	Game Adjust – Crosshair – Green Cross	1 5 2	Picture Adjust – Color Temp – Warm	2 5 2
Game Adjust – Game Mode – Gamer 2	1 1 2	Game Adjust – Crosshair – Red Dot	1 5 3	Picture Adjust – Color Temp – Medium	2 5 3
Game Adjust – Game Mode – FPS	1 1 3	Game Adjust – Crosshair – Green Dot	1 5 4	Picture Adjust – Color Temp – Cool	2 5 4
Game Adjust – Game Mode – RTS	1 1 4	Game Adjust – Crosshair – Off	1 5 5	Picture Adjust – Color Temp – Manual	2 5 5
Game Adjust – Game Mode – Vivid	1 1 5	Game Adjust – FPS Counter	1 6	Picture Adjust – Color Temp – Manual	2 5 5 1 Slider
Game Adjust – Game Mode – Reader	1 1 6	Game Adjust – FPS Counter – On	1 6 1	Picture Adjust – R/G/B	2 6
Game Adjust – Game Mode – HDR Effect	1 1 7	Game Adjust – FPS Counter – Off	1 6 2	Picture Adjust – R/G/B – Red	2 6 1 Slider
Game Adjust – Game Mode – Color Weakness	1 1 8	Game Adjust – Game Reset	1 7	Picture Adjust – R/G/B – Green	2 6 2 Slider
Game Adjust – FreeSync / Adaptive-Sync	1 2	Game Adjust – Game Reset – No	1 7 1	Picture Adjust – R/G/B – Blue	2 6 3 Slider
Game Adjust – FreeSync / Adaptive-Sync – Extended	1 2 1	Game Adjust – Game Reset – Yes	1 7 2	Picture Adjust – Six Color	2 7
Game Adjust – FreeSync / Adaptive-Sync – Basic	1 2 2	Picture Adjust	2	Picture Adjust – Six Color – Red_Hue	2 7 1 Slider
Game Adjust – FreeSync / Adaptive-Sync – Off	1 2 3	Picture Adjust – Brightness	2 1	Picture Adjust – Six Color – Red_Saturation	2 7 2 Slider
Game Adjust – Black Stabilizer	1 3	Picture Adjust – Brightness	2 1 1 Slider	Picture Adjust – Six Color – Green_Hue	2 7 3 Slider
Game Adjust – Black Stabilizer	1 3 1 Slider	Picture Adjust – Contrast	2 2	Picture Adjust – Six Color – Green_Saturation	2 7 4 Slider
Game Adjust – Response Time	1 4	Picture Adjust – Contrast	2 2 1 Slider	Picture Adjust – Six Color – Blue_Hue	2 7 5 Slider
Game Adjust – Response Time – Faster	1 4 1	Picture Adjust – Sharpness	2 3	Picture Adjust – Six Color – Blue_Saturation	2 7 6 Slider
Game Adjust – Response Time – Fast	1 4 2	Picture Adjust – Sharpness	2 3 1 Slider	Picture Adjust – Six Color – Cyan_Hue	2 7 7 Slider
Game Adjust – Response Time – Normal	1 4 3	Picture Adjust – Gamma	2 4	Picture Adjust – Six Color – Cyan_Saturation	2 7 8 Slider
Game Adjust – Response Time – Off	1 4 4	Picture Adjust – Gamma – Mode 1	2 4 1	Picture Adjust – Six Color – Magenta_Hue	2 7 9 Slider
Game Adjust – Crosshair	1 5	Picture Adjust – Gamma – Mode 2	2 4 2	Picture Adjust – Six Color – Magenta_Saturation	2 7 10 Slider
		Picture Adjust – Gamma – Mode 3	2 4 3	Picture Adjust – Six Color – Yellow_Hue	2 7 11 Slider
		Picture Adjust – Gamma – Mode 4	2 4 4	Picture Adjust – Six Color – Yellow_Saturation	2 7 12 Slider
		Picture Adjust – Color Temp	2 5	Picture Adjust – Black Level	2 8
Picture Adjust – Black Level – High	2 8 1	General – Language – Portuguese	4 1 8	General – SMART ENERGY SAVING	4 4
Picture Adjust – Black Level – Low	2 8 2	General – Language – Portuguese (Brazil)	4 1 9	General – SMART ENERGY SAVING – High	4 4 1
Picture Adjust – Picture Reset	2 9	General – Language – Polish	4 1 10	General – SMART ENERGY SAVING – Low	4 4 2
Picture Adjust – Picture Reset – No	2 9 1	General – Language – Russian	4 1 11	General – SMART ENERGY SAVING – Off	4 4 3
Picture Adjust – Picture Reset – Yes	2 9 2	General – Language – Turkish	4 1 12	General – Deep Sleep Mode	4 5
Input	3	General – Language – Ukrainian	4 1 13	General – Deep Sleep Mode – On	4 5 1
Input – Input List	3 1	General – Language – Chinese	4 1 14	General – Deep Sleep Mode – Off	4 5 2
Input – Input List – HDMI	3 1 1	General – Language – Traditional Chinese	4 1 15	General – Automatic Standby	4 6
Input – Input List – DisplayPort	3 1 2	General – Language – Japanese	4 1 16	General – Automatic Standby – 8H	4 6 1
Input – Aspect Ratio	3 2	General – Language – Korean	4 1 17	General – Automatic Standby – 6H	4 6 2
Input – Aspect Ratio – Full Wide	3 2 1	General – User-defined Key 1	4 2	General – Automatic Standby – 4H	4 6 3
Input – Aspect Ratio – Original	3 2 2	General – User-defined Key 1 – Input	4 2 1	General – Automatic Standby – Off	4 6 4
Input – Auto Input Switch	3 3	General – User-defined Key 1 – Game Mode	4 2 2	General – Input Compatibility Version	4 7
Input – Auto Input Switch – On	3 3 1	General – User-defined Key 1 – Crosshair	4 2 3	General – Input Compatibility Version(HDMI) – 2.0	4 7 1
Input – Auto Input Switch – Off	3 3 2	General – User-defined Key 1 – Black Stabilizer	4 2 4	General – Input Compatibility Version(HDMI) – 1.4	4 7 2
General	4	General – User-defined Key 1 – Response Time	4 2 5	General – Input Compatibility Version(Displayport) – 1.4	4 7 1
General – Language	4 1	General – User-defined Key 1 – FPS Counter	4 2 6	General – Input Compatibility Version(Displayport) – 1.2	4 7 2
General – Language – English	4 1 1	General – User-defined Key 2	4 3
General – Language – German	4 1 2	General – User-defined Key 2 – Input	4 3 1	General – Buzzer	4 8
General – Language – French	4 1 3	General – User-defined Key 2 – Game Mode	4 3 2	General – Buzzer – On	4 8 1
General – Language – Spanish	4 1 4	General – User-defined Key 2 – Crosshair	4 3 3	General – Buzzer – Off	4 8 2
General – Language – Italian	4 1 5	General – User-defined Key 2 – Black Stabilizer	4 3 4	General – OSD Lock	4 9
General – Language – Swedish	4 1 6	General – User-defined Key 2 – Response Time	4 3 5	General – OSD Lock – On	4 9 1
General – Language – Finnish	4 1 7	General – User-defined Key 2 – FPS Counter	4 3 6	General – OSD Lock – Off	4 9 2
General – Information	4 10
General – Open Source Software License	4 11
General – Open Source Software License – View	4 11 1
General – Reset to Initial Settings	4 12
General – Reset to Initial Settings – No	4 12 1
General – Reset to Initial Settings – Yes	4 12 2

If water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter), disconnect the power cord immediately and contact the service center. Otherwise, this may cause a fire or electric shock.

Do not touch the power plug or AC adapter with wet hands. If the pins of the plug are wet or dusty, wipe and dry them before use. Otherwise, this may cause a fire or electric shock.

Make sure to completely insert the power cord into the AC adapter. If loosely connected, the poor connection may cause a fire or electric shock.

Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc. The use of non-approved products may cause a fire or electric shock.

When unplugging the power cord, always pull it by the plug. Do not bend the power cord with excessive force. The power line can be damaged, which may cause electric shock or fire.

Be careful not to step or place heavy objects (electronic appliances, clothing, etc.) on the power cord or AC adapter. Be careful not to damage the power cord or AC adapter with sharp objects. Damaged power cords may cause a fire or electric shock.

Never disassemble, repair or modify the power cord or AC adapter. This may cause a fire or electric shock.

Use only the power cord supplied with the unit or another manufacturer’s authorized cord. Failure to do so may result in fire or electrical shock or damage to the product.

Use only a properly grounded plug and receptacle. If you do not, you may be electrocuted or injured. Or the product might be damaged.

Do not use a damaged or loose plug. This may cause electrical shock or fire.

Operate the display only from a power source (i.e. voltage) indicated in the product specification. Otherwise the product can be damaged, fire can occur or you may be electrocuted. If you are not sure what type of power supply you have, consult a certified electrician.

In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. It can cause electric shock.

Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a power bar with a grounding terminal designed for exclusive use with the computer. A fire can break out due to overheating.

Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off before plugging in the cord. You may be electrocuted due to excess moisture.

If you don’t intend to use the product for a long time, unplug the power cable from the product. Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.

Insert the power plug firm so it cannot come loose. A loose connection can cause fire.

Do not insert metal or other conductive materials into the product openings. Additionally, do not touch the power cable right after plugging into the wall input terminal. You may be electrocuted.

The AC Plug is the disconnecting device. It should be easily accessible in case of emergency.

Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is easily accessible.

Be sure to keep the outlet, AC adapter, and pins of the power plug clean from dust and etc. This may cause a fire.

Do not unplug the power cord while the product is in use. Electrical shock can damage the product.

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

Keep away from heat sources like heaters or open flames. Electrical shock, fire, malfunction or deformation may occur.

Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

Do not put heavy objects on the product on sit upon it. If the product collapses or is dropped, you may be injured. Children must pay particular attention.

Do not leave the power or signal cable where someone can trip over it. The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.

Install the product in a neat and dry place. Do not use near water. Dust or moisture can cause electrical shock, fire or product damage.

Do not add accessories that have not been designed for this display.

If you smell smoke or other odors or hear a strange sound from the product unplug the power cord and contact LG Customer Service. If you continue to use without taking proper measures, electrical shock or fire can occur.

If you dropped the product or the case is broken, turn off the product and unplug the power cord. If you continue to use without taking proper measures, electrical shock or fire can occur. Contact LG Customer Service.

Do not drop an object on or apply impact to the product. Do not throw any toys or objects at the product. It can cause injury to humans, problems to the product and damage the display.

Keep out of reach of children and do not place toys near the product.

Make sure the product ventilation hole is not blocked. Install the product more than 10cm from the wall. If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat build-up.

Do not cover the product with cloth or other material (eg. plastic) while plugged in. The product can be deformed or fire can break out due to internal overheating.

Place the product on a flat and stable surface that is large enough to support the product. If the product is dropped, you may be injured or the product may be broken.

Install the product where no Electromagnetic Interference occurs.

Keep the product away from direct sunlight. The product can be damaged.

Do not place the product on the floor. Small Children and others may trip over it.

Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces.

Make sure to turn off the product. You may be electrocuted or the product can be damaged.

Make sure to remove all cables before moving the product. You may be electrocuted or the product can be damaged.

When lifting or moving the product, do not hold it upside down while holding only the stand. This may cause the product to fall resulting in damage or injury.

Do not shock the product when moving it. You may be electrocuted or the product can be damaged.

Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire.

Do not place the product face down. This may damage the TFT-LCD screen.

Do not attempt to disassemble, repair or modify the product yourself. Fire or electric shock can occur. Contact LG Customer Service for repair.

When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol)

Keep the product away from water. Fire or electric shock accident can occur.

Avoid high temperatures and humidity.

Do not put or store flammable substances near the product. There is a danger of explosion or fire.

Keep the product clean at all times.

Take a comfortable and natural position when working with the product.

Take a regular break when working with the product for a long time.

Do not press on the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.

Keep proper distance from the product and rest from time-to-time. Your vision may be impaired if you look at the product too closely or for too long.

Set the appropriate resolution by referring to the User’s Guide.

Keep small accessories out of the reach of children.

Displaying a still image for long time on the monitor may leave persistent image or stain on the monitor screen. To avoid this problem, use a screen saver and power off when this product is not used. Persistent image or stain caused by long time usage are not covered by the warranty on this product.

Do not use products using high voltage around the Monitor. (ex. Electrical Swatter). Monitor may have malfunction as its electrical shock.

Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining.