FREE ENGLISH LG SN8YG (02) PDF USER GUIDE
FREE ENGLISH LG SN8YG (02) PDF USER MANUAL
FREE ENGLISH LG SN8YG (02) PDF OWNER GUIDE
FREE ENGLISH LG SN8YG (02) PDF OWNER MANUAL
FREE ENGLISH LG SN8YG (02) PDF REFERENCE GUIDE
FREE ENGLISH LG SN8YG (02) PDF INSTRUCTION GUIDE
FREE ENGLISH LG SN8YG (02) PDF REFERENCE MANUAL
FREE ENGLISH LG SN8YG (02) PDF INSTRUCTION MANUAL
FREE ENGLISH LG SN8YG (02) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD LG SN8YG (02) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
LG SN8YG (02) PDF SUMMARY:
Q: How do you switch the unit ON or OFF?
Press the (Standby) button on the front panel or the remote control.
Q: How do you select the function and input source?
Press the F (Function) button repeatedly on the front panel.
Q: What are the input source/function display options?
The input source/function display options are: **Wi-Fi, Bluetooth, Optical, ARC, e-ARC, LG Sound Sync (Wired), HDMI IN, and USB**.
Q: How do you adjust the volume level?
Adjust the volume level by pressing the o/p (Volume) buttons on the front panel or the VOL (Volume) o/p buttons on the remote control.
Q: How do you start or pause playback?
Press the N button on the front panel to start or pause playback.
Q: How do you mute the microphone?
Press the > (Mic mute) button on the front panel to disable voice recognition. The Google Assistant LED will turn amber and a voice will announce that “The mic is muted.” To cancel it, press > on the unit again. The Google Assistant LED will turn off and a voice will announce that “The mic is back on.”
Q: How do you enable Google Assistant to receive voice commands?
Press the button on the front panel to enable Google Assistant. To cancel it, press the button again.
Q: What does it mean when all four Google Assistant LEDs are on?
It means that the device is ready to listen to your voice command.
Q: What does it mean when all four Google Assistant LEDs are blinking?
It means the device is responding to your voice command.
Q: What does it mean when the Google Assistant LED is a solid amber color?
It means the microphone is off and voice recognition is disabled.
Q: What happens to the display window if there is no key input for 15 seconds?
The display window will darken automatically after 15 seconds of no key input.
Q: What happens to the display window when you press any button?
When you press any button, the display window will brighten.
Q: What precautions should you take when using the touch buttons?
* Use the touch buttons with clean and dry hands.
* Wipe out any moisture on the touch buttons before using in a humid environment.
* Do not press the touch buttons hard.
* Touch the button that you want to work to operate the function correctly.
* Be careful not to have any conductive material on the touch buttons to prevent malfunctions.
Q: What happens if the main unit is not connected to an external device and is not used for 15 minutes?
The unit will turn itself off to save electric consumption.
Q: Where do you connect the AC adapter?
Connect the AC adapter to the DC IN port on the rear panel.
Q: Where do you connect an external device via HDMI?
Connect the HDMI OUT jack on the external device to the HDMI IN jack on the back of the unit.
Q: Where do you connect the unit to a TV via HDMI?
Connect the HDMI OUT (TV eARC/ARC) jack on the back of the unit to the ARC jack on the TV.
Q: Where do you connect a TV via OPTICAL cable?
Connect the OPTICAL OUT jack on the TV to the OPTICAL IN jack on the back of the unit.
Q: Where do you connect a USB memory device?
Connect a USB memory device to the USB port on the back of the unit.
Q: How do you replace the battery in the remote control?
Remove the battery cover on the rear of the remote control, and insert the battery with 4 and 5 matched correctly.
Q: How do you switch to networked standby mode?
Press the 1 (Standby) button to turn on the networked standby function.
Q: How do you switch off networked standby mode?
Press and hold the 1 (Standby) button for about 3 seconds to turn off the networked standby function.
How do I select a sound effect mode?
Select a sound effect mode by using the SOUND EFFECT button. The available modes include:
- AI SOUND PRO: Analyzes the input sound and provides optimized sound in real time.
- BASS BLAST or BASS BLAST+: Reinforces bass and provides a powerful sound.
- STANDARD: Premium sound using MERIDIAN technology.
- MOVIE: Immersive and cinematic surround sound.
- MUSIC: Enhanced sound for music sources. Note: You cannot change the sound effect if the unit detects a DOLBY ATMOS or DTS:X stream. In this case, pressing SOUND EFFECT will display “NOT SUPPORTED.”
Can I control the unit’s volume with my TV remote?
Yes, you can control the unit’s volume with your TV remote, even if it is from a different company. To turn the TV Remote function on or off, press and hold the SOUND EFFECT button for about 3 seconds, and then press it again. Supported TV brands include: LG, Panasonic, Philips, Samsung, Sharp, Sony, Toshiba, and Vizio.
How do I skip to the next or previous file?
Press the C or V button to go to the next or previous file.
How do I play or pause a file?
Press the N button to start playback or pause playback.
What is the Night Time mode and how do I use it?
The Night time mode is useful for watching movies at low volume late at night. It reduces sound intensity and improves fineness and softness. To activate Night time mode, press the 8 button. To cancel it, press the 8 button again.
What is the AUTO POWER function?
The AUTO POWER function allows the unit to turn on and off automatically by input signal, specifically through the Optical input.
How do I select the input source?
Select the function and input source by pressing the F button repeatedly.
How do I mute the unit?
Press the [ button to mute your unit. To cancel it, press the [ button again.
How do I use Google Assistant with this unit?
Google Assistant can be enabled to receive voice commands while watching TV. To cancel it, press the ] button again. Note that this is not necessary when listening to music through Wi-Fi or Bluetooth, where you can simply say “Ok Google”.
How do I adjust the sound level of individual speakers?
- Select the speaker you want to adjust by using the arrow buttons.
- Adjust the sound level using the VOL o/p buttons. The display shows the following ranges:
- WF (Sub Woofer): -15 ~ 6
- C (Center): -6 ~ 6
- OVC (Overhead Volume Control): -6 ~ 6
- R (Rear): -6 ~ 6
- TRE (Treble): -5 ~ 5
- BAS (Bass): -5 ~ 5 Adjusting rear speakers level is only applied when the rear speakers are connected.
How do I turn surround sound on or off?
To turn surround sound on or off, press and hold the ] button for about 3 seconds, and then press it again.
What information can I display using the J button?
Pressing the J button displays various information about the input source, such as:
- Wi-Fi: Connected Application name
- BT (Bluetooth): Connected Bluetooth device name
- OPT (Optical)/ARC/E-ARC/HDMI (HDMI IN): Audio format
- USB: File information contained on the USB.
How do I use the REPEAT function?
Press the REPEAT button to select the desired repeat or random mode.
How do I search for a folder on a USB device?
Use the FOLDER W/S buttons to search a folder on a USB device.
What are the speaker positions for this unit?
- a) Center speaker
- b) Front speakers
- c) Top speakers
- d) Subwoofer
- e) Rear speakers
Where should I place the soundbar and subwoofer for the best sound?
Place the sound bar in front of the TV and connect it to the desired device. The wireless subwoofer can be placed anywhere in the room, but it is best to place it near the main unit, slightly turned toward the center of the room to reduce wall reflections.
What do I need to be aware of when installing the sound bar near the TV?
If the sound bar covers the remote sensor of the TV, separate the distance between the sound bar and the TV by 10 to 15 cm or more.
What should I avoid doing when installing the unit?
Do not install the unit upside down as it can damage the parts or cause personal injury. Do not hang on to the installed unit or expose it to any impact. Secure the unit firmly to the wall so it does not fall off, which can cause injury or damage to the product.
What should I do when installing the unit on a wall with a child around?
When the unit is installed on a wall, ensure that a child does not pull any of the connecting cables, as this may cause it to fall.
What is recommended when mounting the main unit on a wall?
Connect the cables before installing the main unit on the wall.
What materials are needed for mounting the unit on a wall?
- Unit
- Wall bracket install guide
- Screws
- Wall plugs
- Wall bracket (Not supplied)
Note: Screws (A) and Wall Plugs are not supplied. The Hilti (HUD-1 6 x 30) is recommended for mounting.
How do I mount the unit on a wall?
- Match the bottom edge of the Wall bracket install guide with the bottom of the TV and attach it to the position.
- If mounting on a concrete wall, use wall plugs and drill holes using the guide sheet.
- Remove the Wall bracket install guide.
- Fix the brackets with screws.
- Put the unit on the brackets to match screw holes on the bottom.
- Fix the unit with screws firmly. To detach the unit, reverse the order.
How do I connect the sound bar to a network?
Connect to the network and your smart device using the “Google Home” app to enjoy various functions. The app is required for wireless network connection. The network automatically connects to IPv4 or IPv6 in an environment supporting both. Network status can be checked via the settings of My Speakers in the “LG Wi-Fi Speaker” app.
What do I need before setting up the wireless connection using “Google Home” app?
- A wireless router connected to the internet.
- A smart device (Android or iOS) connected to the wireless router via Wi-Fi.
- A Google account.
How do I download the “Google Home” app?
- Tap the “Google Play Store” or “App Store” icon.
- Search for “Google Home” and tap “Search.”
- Select “Google Home” and download. Note: The app may not work depending on the device version.
What do I need to do to launch the app and connect to Wi-Fi?
Make sure the Wi-Fi feature on your smart device is turned on. Once connected, you do not need to perform the operation again. For iOS devices, Bluetooth should also be turned on.
How do I set up the speaker using the “Google Home” app?
- Tap the “Google Home” icon to launch the app.
- Follow the on-screen instructions to set the speaker, using the same Wi-Fi connection as your smart device.
- You should create a speaker name, needed for Bluetooth pairing, and can be checked and edited later. If the Bluetooth setting is turned on it will be easier to connect to Wi-Fi.
How will I know when the speaker is connected to Wi-Fi?
When the speaker is properly connected to Wi-Fi, “CONNECTED” will appear on the display window with a sound. Note: Wi-Fi connection may not work well depending on the wireless router status.
Are there any recommendations for using Wi-Fi Group Play?
It is recommended to use Wi-Fi Group Play with less than 5 speakers.
Is the speaker compatible with the “Smart ThinQ” app?
No, the speaker is not compatible with the “Smart ThinQ” app and cannot be controlled using it.
How do I organize the cables?
Use cable ties to hold the cables together and tighten them. Cable ties are not provided. Arrange cables as needed after all connections are completed.
How do I connect the AC adapter?
- Connect the supplied AC power cord to the AC adapter.
- Connect the AC adapter cable to the DC IN adapter input.
- Plug the AC power cord into an AC outlet.
Use only the supplied AC adapter. Using other power supplies can cause damage and void the warranty.
How do I connect the wireless subwoofer for the first time?
- Connect the power cords of both the sound bar and the wireless subwoofer to the outlet.
- Turn on the sound bar. The sound bar and the wireless subwoofer will connect automatically. The green LED on the rear of the wireless subwoofer will turn on when pairing is completed.
What do I do if the wireless subwoofer connection fails?
If the connection is not completed and the red LED is on and the subwoofer makes no sound, follow these steps:
- Press Pairing on the rear of the wireless subwoofer. The green LED on the rear will blink quickly. If the green LED does not blink, press and hold the Pairing button.
- Turn on the sound bar. Pairing will be completed when the green LED on the rear of the wireless subwoofer turns on.
Q: How long does it take for the main unit and the subwoofer to communicate with each other?
A: It takes a few seconds (and may take longer) for the main unit and the subwoofer to communicate with each other and make sounds.
Q: Where should the main unit and subwoofer be installed for the best sound quality?
A: The closer the main unit and the subwoofer, the better sound quality. It is recommended to install the main unit and the subwoofer as close as possible. Avoid having an obstacle between the main unit and the subwoofer, or having a device using the same frequency with this wireless connection such as medical equipment, a microwave, or a wireless LAN device nearby.
Q: How far away should the sound bar and subwoofer be from devices like wireless routers or microwave ovens?
A: Keep the sound bar and the subwoofer away from such devices over 1 meter to prevent wireless interference.
Q: How do you connect the rear speakers?
A: 1. Connect the black stripe wire to the terminal marked – (minus) and the other end to the terminal marked + (plus). 2. Connect the wireless receiver and the rear speakers (left, right) with the speaker cables.
Q: What are the color positions for connecting rear speakers?
A: * Blue: Rear left
- Grey: Rear right
Q: What is needed to enjoy surround sound?
A: You need to purchase the wireless rear speakers kit (SPK8-S) to enjoy surround sound.
Q: What type of speaker should be used with this unit?
A: Use the speaker supplied with this unit only. Using any other speaker may cause malfunction.
Q: What should you be sure to match when connecting the speaker cable to the components?
A: Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack bass.
Q: What does a blinking yellow-green LED on the wireless receiver indicate?
A: The connection is trying.
Q: What does a solid yellow-green LED on the wireless receiver indicate?
A: The connection is completed.
Q: What does a red LED on the wireless receiver indicate?
A: The wireless receiver is in standby mode or the connection has failed.
Q: What does it mean if there is no LED display on the wireless receiver?
A: The power cord of the wireless receiver is disconnected.
Q: How do you set up the wireless receiver for the first time?
A: 1. Connect the power cord to the wireless receiver to the outlet. 2. Turn on the main unit: The sound bar and wireless receiver will be automatically connected. The yellow-green LED on the wireless receiver turns on.
Q: How do you manually pair the wireless receiver?
A: 1. Press PAIRING on the rear of the wireless receiver. The yellow-green LED on the wireless receiver blinks quickly. 2. Turn on the main unit. Pairing is completed. The yellow-green LED on the wireless receiver turns on.
Q: How can you turn on the surround function?
A: To turn on surround function, press and hold on the remote control for about 3 seconds and press it once again while “OFF – SURROUND” is scrolled.
Q: How can you turn off the surround function?
A: To turn off surround function, press and hold on the remote control for about 3 seconds and press it once again while “ON – SURROUND” is scrolled.
Q: What sound outputs are available for AI Sound Pro when surround function is on?
A: 5.1 Ch and 7.1 Ch or more are available when rear speakers are connected. When there are no rear speakers, 2.0 Ch is the output.
Q: What sound outputs are available for BASS BLAST or BASS BLAST+ when surround function is on?
A: 5.1 Ch and 7.1 Ch or more are available when rear speakers are connected. When there are no rear speakers, 2.0 Ch is the output.
Q: What sound outputs are available for STANDARD when surround function is on?
A: 5.1 Ch and 7.1 Ch or more are available when rear speakers are connected. When there are no rear speakers, 2.0 Ch is the output.
Q: What sound outputs are available for MOVIE when surround function is on?
A: 5.1 Ch and 7.1 Ch or more are available when rear speakers are connected. When there are no rear speakers, 2.0 Ch is the output.
Q: What sound outputs are available for MUSIC when surround function is on?
A: 5.1 Ch and 7.1 Ch or more are available when rear speakers are connected. When there are no rear speakers, 2.0 Ch is the output.
Q: What sound outputs are available for AI Sound Pro when surround function is off?
A: 5.1 Ch and 7.1 Ch or more are available when rear speakers are connected. When there are no rear speakers, 2.0 Ch is the output.
Q: What sound outputs are available for BASS BLAST or BASS BLAST+ when surround function is off?
A: 5.1 Ch and 7.1 Ch or more are available when rear speakers are connected. When there are no rear speakers, 2.0 Ch is the output.
Q: What sound outputs are available for STANDARD when surround function is off?
A: 5.1 Ch and 7.1 Ch or more are available when rear speakers are connected. When there are no rear speakers, 2.0 Ch is the output.
Q: What sound outputs are available for MOVIE when surround function is off?
A: 5.1 Ch and 7.1 Ch or more are available when rear speakers are connected. When there are no rear speakers, 2.0 Ch is the output.
Q: What sound outputs are available for MUSIC when surround function is off?
A: 5.1 Ch and 7.1 Ch or more are available when rear speakers are connected. When there are no rear speakers, 2.0 Ch is the output.
Q: How do you affix the ferrite core to the speaker cables?
A: 1. Pull the stopper of the ferrite core to open. 2. Wind the speaker cables around the ferrite core twice. 3. Close the ferrite core until it clicks.
Q: What should you do if there is a strong electromagnetic wave product nearby causing interference?
A: Put the main unit and wireless receiver away from there.
Q: What happens when the sound bar is turned off in regards to the wireless receiver?
A: The wireless receiver will automatically switch to standby mode in a few minutes after the sound bar is turned off. When the wireless receiver is in standby mode, the LED will turn on in red.
Q: What happens when you turn on the sound bar in regards to the wireless receiver?
A: When you turn on the sound bar, the wireless receiver will turn on and the LED will change to yellow – green and then the rear speakers will make sound within a few seconds.
Q: How long does it take for the main unit and Wireless Receiver to communicate with each other?
A: It takes a few seconds (and may take longer) for the main unit and Wireless Receiver to communicate with each other.
Q: How far away from a TV screen or PC monitor should the rear speakers be?
A: Use the rear speaker at least 30 cm away from either TV screen or PC monitor.
Q: What can happen when the wireless receiver is being connected or disconnected with the main unit?
A: Output sound might be interrupted.
Q: What is the recommended distance between the sound bar and the wireless receiver?
A: Set the distance between the sound bar and the wireless receiver as close as possible and keep them away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
Q: How do you connect the unit to a TV using an optical cable?
A: 1. Connect the OPTICAL IN jack on the back of the unit to OPTICAL OUT jack on the TV using an OPTICAL cable. 2. Select the input source to OPT/HDMI ARC by pressing F repeatedly.
Q: What does it mean if “OPT” is displayed on the display window?
A: It means the connection between the unit and the TV is normal using an optical cable.
Q: What do you need to do before connecting the optical cable?
A: Be sure to remove the protection plug cover if your cable has the cover.
Q: How do you listen to TV audio through the speakers of this unit?
A: You can enjoy the TV audio through the speakers of this unit. In the case of some TV models, you must select the external speaker option from the TV menu. (For details, reference your TV user manual.)
Q: What happens if this unit is connected by OPTICAL and ARC at the same time?
A: The ARC signal has a higher priority.
Q: What functions of this unit can be controlled by the TV’s remote control with LG Sound Sync?
A: Volume up/down, mute
Q: What should you do when the connection fails when using LG Sound Sync?
A: Make sure of the condition of the TV and power. Also, make sure of the condition of this unit and the connection when the unit is turned off, when changing to another function, or when disconnecting the optical cable.
Q: What is the first step to connecting an LG TV to the unit using an optical cable and LG Sound Sync?
A: 1. Connect your LG TV to the unit by using an optical cable.
Q: What is the second step to connecting an LG TV to the unit using an optical cable and LG Sound Sync?
A: 2. Set up the sound output of TV to listen to the sound through this unit: (Refer to the TV’s instruction manual for the details of LG Sound Sync.)
Q: What is the third step to connecting an LG TV to the unit using an optical cable and LG Sound Sync?
A: 3. Turn on the unit by pressing 1.
Q: What is the fourth step to connecting an LG TV to the unit using an optical cable and LG Sound Sync?
A: 4. Select the input source to OPT/HDMI ARC by pressing F repeatedly.
Q: What does it mean if “LGOPT” is displayed on the display window?
A: It means the connection between the unit and your LG TV is normal using an optical cable.
Q: How do you connect this unit to a TV that supports HDMI CEC and ARC without using an optical cable?
A: 1. Connect the HDMI OUT (TV eARC/ARC) jack on the back of the unit to the ARC jack on the TV using an HDMI cable. 2. Select the input source to OPT/HDMI ARC by pressing F repeatedly.
Q: What does it mean if “ARC” or “E-ARC” is displayed on the display window?
A: It means the connection between the unit and your TV is normal using an HDMI cable.
Q: What do you need to do on some TV models to listen to audio through the speakers of this unit?
A: In the case of some TV models, you must select the external speaker option from the TV menu. (For details, reference your TV user manual.)
Q: What function may need to be turned on depending on your LG TV model?
A: Depending on your LG TV model, you may need to turn on the SIMPLINK function on your LG TV.
Q: What should you do when returning to ARC function from another function?
A: You need to select the input source to OPT/HDMI ARC. Then this unit changes to ARC function automatically.
Q: What is the ARC function?
A: The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of the unit.
Q: What is the eARC function?
A: eARC (Enhanced Audio Return Channel) features an advancement over the existing ARC (Audio Return Channel) and supports the latest high-bitrate audio formats such as DTS-HD Master Audio™, DTS:X®, Dolby® TrueHD, Dolby Atmos® and more.
Q: What must your TV support to use the eARC or ARC function?
A: Your TV must support the HDMI-CEC and eARC or ARC function and the HDMI-CEC and eARC or ARC must be set to On.
Q: What should you use for connecting the unit with a TV that supports eARC or ARC?
A: You must use a certified HDMI cable and connect the HDMI OUT on the unit with HDMI IN of the TV that supports eARC or ARC function using an HDMI cable.
Q: How many soundbars can you connect to a TV compatible with eARC or ARC?
A: You can connect only one Sound bar to a TV compatible with eARC or ARC.
Q: What is SIMPLINK?
A: Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection.
Q: What functions can be controlled by the TV’s remote control with SIMPLINK?
A: Power on/off, volume up/down, etc.
Q: What should you do if you are connecting an HDMI or DVI compatible device?
A: * Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.
- Make sure the connected device’s video input is set correctly for this unit.
- Verify that the connected device is compatible with 720 x 576p (or 480p), 1280 x 720p, 1920 x 1080i, 1920 x 1080p, 4096 x 2160p or 3840 x 2160p video input.
Q: What happens if a connected HDMI device does not accept the audio output of the player?
A: The HDMI device’s audio sound may be distorted or may not output.
Q: What can happen if you change the resolution after the connection has been established?
A: Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again.
Q: What happens when the HDMI connection with HDCP is not verified?
A: The TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable.
Q: What should you do if there are noises or lines on the screen?
A: Please check the HDMI cable. (length is generally limited to 4.5 m).
Q: Can you change the video resolution in the HDMI mode?
A: You cannot change the video resolution in the HDMI mode. Change the video resolution of the connected component.
Q: What should you do if the video output signal is abnormal when your personal computer is connected to the HDMI IN jack?
A: Change the resolution of your personal computer to 576p (or 480p), 720p, 1080i or 1080p.
Q: What type of HDMI cables can cause problems with sound and video transmission?
A: Some HDMI cables have poor signal transmission, which can cause problems with sound and video transmission.
Q: What type of HDMI cable is recommended to use?
A: Use the cable marked with the premium HDMI certification logo. It’s recommended to use a “High Speed HDMI Cable with Ethernet” or a later version.
Q: What are the recommended types of HDMI cables to use?
A: * HIGH SPEED HDMI CABLE WITH ETHERNET (O)
- Premium High Speed HDMI® Cable with Ethernet (O)
- ULTRA HIGH SPEED HDMI® CABLE (O)
Q: What must your television support to fully enjoy the Live broadcasting channel with an audio system through an HDMI cable?
A: Your television must support the newest HDMI features (HDMI CEC) / ARC (Audio Return Channel). Unless your TV supports these HDMI features, the audio system should be connected through an OPTICAL cable.
Q: What is HDMI CEC?
A: Consumer Electronics Control (CEC) is an HDMI feature designed to allow the user to command and control the CEC-enabled devices, that are connected through HDMI by using only one of their remote controls.
Q: What are some of the trade names for CEC?
A: * SimpLink (LG)
- Anynet+ (Samsung)
- BRAVIA Sync (Sony)
- EasyLink (Philips)
Q: What are the benefits of DOLBY ATMOS®?
A: Dolby Atmos gives you an amazing experience you’ve never before by overhead sound, and all the richness, clarity, and power of Dolby sound.
Q: What are the benefits of DTS:X®?
A: DTS:X® is immersed in this natural, multi-dimensional sound experience as we go about our daily lives.
Q: When is DOLBY ATMOS® available?
A: DOLBY ATMOS® is available only in HDMI and ARC mode. To use DOLBY ATMOS® in ARC mode, your TV has to support DOLBY ATMOS®.
Q: When is DTS:X® available?
A: DTS:X® is available only in HDMI mode.
Q: What audio output settings should you configure on external devices to use DOLBY ATMOS® and DTS:X®?
A: It is needed to set up an audio output on external devices (Blu-ray disc player, TV etc.) to “No encoding” such as “Bitstream”, “Auto” or “Bypass”. If you can select audio output sampling rate, set it to 192 kHz.
Q: What should you do if your TV does not support DTS sound source?
A: Connect the playback (source) device to the HDMI IN or OPTICAL IN jack on the soundbar to listen to DTS audio.
Q: How do you connect an external device such as a Blu-ray player to listen to DOLBY ATMOS® and DTS:X®?
A: 1. Connect the HDMI IN jack on the back of the unit to HDMI OUT jack on the external device such as Blu-ray disc player, DVD player, etc. 2. Connect the HDMI OUT (TV eARC/ARC) jack on the back of the unit to HDMI IN (ARC) jack on the TV. 3. Select the input source to HDMI or OPT/HDMI ARC by pressing F repeatedly. If you select HDMI, you can hear the sound from the external device. Select it when playing the external device. If you select OPT/HDMI ARC, you can hear the sound from your TV. Select it when watching the TV.
Q: What is displayed on the display window if connecting normally with DOLBY ATMOS® and DTS:X®?
A: You can see “DOLBY ATMOS” or “DTS:X” on the display window if connecting normally between this sound bar and your TV and the content is played.
Q: How many channels do DOLBY ATMOS®/DTS:X® support?
A: DOLBY ATMOS®/DTS:X® supports 3.1.2 channels, and 5.1.2 channels when connected with a Rear kit.
How can I connect an external device using HDMI?
Connect the HDMI IN jack on the back of the unit to the HDMI OUT jack on the external audio device, such as a Blu-ray or DVD player. Then, select the HDMI input by pressing F repeatedly.
How can I connect an external device using an optical cable?
Connect the OPTICAL IN jack on the back of the unit to the optical output jack of your external device. Then, select the OPT/HDMI ARC input by pressing F repeatedly. If the connection is successful, you will see “OPT” on the display window. Make sure to remove the protective plug cover from the optical cable if it has one, and ensure proper alignment of the cable to avoid damage.
What is another way to connect an external device to my soundbar?
You can connect the HDMI IN jack of your TV to the HDMI OUT jack on the external device, such as a Blu-ray or DVD player. Then, connect the OPTICAL IN jack on the back of the unit to the OPTICAL OUT jack on the TV using an optical cable, or connect the HDMI OUT (TV eARC/ARC) jack on the back of the unit to the HDMI IN (ARC) jack on the TV using an HDMI cable. Finally, select the OPT/HDMI ARC input by pressing F repeatedly.
What should I do if the sound bar has no sound or the video on TV is not smooth?
The HDMI cable may be the problem. Refer to the HDMI cable checklist.
How can I connect a USB device?
Connect the USB memory device to the USB port on the back of the unit.
How do I remove a USB device from the unit?
First, choose a different function/mode, then remove the USB device from the unit.
What types of USB devices are compatible?
The unit supports flash type MP3 players and USB flash drives that support USB 2.0.
What types of USB devices are not supported?
- Devices that require additional program installation connected to a computer.
- Some USB devices.
- External HDD.
- Card readers.
- Locked devices.
- Hard type USB devices.
- USB hubs.
- USB extension cables.
- iPhone/iPod/iPad.
- Android devices.
What are the requirements for using a USB device?
- Do not extract the USB device while in operation.
- For a large capacity USB, it may take longer than a few minutes to be searched.
- Back up all data to prevent data loss.
- The unit’s USB Port cannot be connected to a PC and cannot be used as a storage device.
What file systems are supported on this unit?
FAT16/FAT32/NTFS systems are available. The exFAT file systems are not supported.
What are the playable file sampling frequencies?
- MP3: within 32 to 48 kHz
- OGG: within 32 to 48 kHz
- AAC: within 32 to 48 kHz
- FLAC: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz (16 bit/ 24 bit)
- WAV: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz (16 bit/ 24 bit)
What are the playable file bitrates?
- MP3: within 8 to 320 kbps
- OGG: within 64 to 320 kbps
- AAC: within 8 to 320 kbps
What are the limitations for USB files?
- Maximum files: Up to 2,000
- Maximum directories: Up to 200
- Protected files by DRM (Digital rights management) cannot be played.
- Video files in the USB storage device cannot be played.
- Depending on the performance of your USB device, playback may not work well.
How are folders and files recognized on the USB?
Folders and files are recognized in the following order: A, B, C, D, E, F, G, H, I, J, a, b, c, d, with folders indicated by an asterisk *. Files are played from A to J one by one in the order they were recorded. If there is no file in a folder, the folder will not appear. The unit can display file or folder names that contain numbers or English characters only.
What is “ROOT” on the USB?
“ROOT” is the first screen you see when the unit recognizes the USB.
How do I operate the USB function?
- Connect the USB device to the USB port.
- Select the USB function by pressing F repeatedly.
How do I control playback of USB files?
- Play: Press N.
- Pause: During playback, press N.
- Skip to the next file: During playback, press V on the remote control.
- Skip to the previous file: Press C on the remote control to go to the previous file if the file is playing less than 3 seconds, or to go to the beginning of the file if the file is playing after 3 seconds.
- Play repeatedly or randomly: Press REPEAT on the remote control repeatedly.
- Search a folder: Press FOLDER W/S on the remote control.
What is the effect of pulling out the power cord or removing the USB device?
The resume point may be cleared.
How does repeat/random playback work?
- OFF: Plays songs on the USB device in order.
- ONE: Plays the same song repeatedly.
- FOLDER: Plays songs in a folder repeatedly.
- ALL: Plays all the songs on the USB device repeatedly.
- SHUFFLE: Plays all the songs once randomly, and then stops playback.
How do I use the Google Assistant?
You can use a variety of voice commands to control the speaker with the Google Assistant. To activate it, say “Ok Google” or press the button.
How do I activate the Google Assistant?
- Turn on the speaker and connect to Wi-Fi.
- Say “Ok Google” or press the button.
- Say the command.
- The Google Assistant will respond.
When is the Google Assistant available to receive voice commands?
The Google Assistant only responds to voice commands when you are using Wi-Fi or BT (Bluetooth) as the input. If you are using HDMI, Optical, ARC, Optical Sound Sync, or USB input, then you must use the button to activate the Google Assistant.
Is it necessary to say “Ok Google” every time I use voice recognition?
Yes, each time you use voice recognition, say “Ok Google” or press the button.
What types of devices can I control using the Google Assistant?
You can control compatible smart home devices such as TVs, lights, switches, plugs, thermostats, and more.
What are some example voice commands for the Google Assistant?
- Time: “What time is it?”, “What time is it now?”, “What time is it in Spain?”
- Weather: “What’s the weather?”, “What’s the weather this weekend?”, “What’s the weather in Paris?”, “Will it rain tomorrow?”
- Plan: “Tell me about my day.”, “What’s my next meeting?”, “Set a reminder to check schedule at 6pm.”
- Alarms: “Set an alarm” , “Set an alarm for 9am”, “Wake me up at 9am”, “What alarms are set?”
- Music: “Play the music.”, “Next song.”, “Previous song.”, “Pause the music”
- Volume: “Volume level 3.”, “Maximum volume.”, “Mute.”, “Turn it up”, “Turn it down”
- Smart Home devices: “Set the heat to 22” “Turn on lights in the kitchen” “Watch on TV”
How does the volume level voice command work?
The volume range of this unit is 1-40, except for the LGOPT function where the range is 1-100. The Google Assistant recognizes volume level changes as a scale (1-10) or a percentage (1-100 %). For example, “Volume level five” will change the volume to 20, and “Volume to 65 %” will change the volume to 26. “Volume up” or “volume down” increases or decreases volume by 10% (i.e., 4). When saying numbers of 10 and less, say “percent” to avoid too loud sound.
What does it mean if the Google Assistant LED (White) blinks?
It means the speaker is not connected to Wi-Fi. Follow the “Installing “Google Home” App” instructions and try again.
What does it mean if the Google Assistant LED is solid amber?
It means the microphone is off. The Google Assistant will not receive your commands. Press > on the unit to turn the microphone on.
What should I do if the Google Assistant fails to understand my commands?
It may say answers such as “Sorry, I can’t help with that yet”, “My apologies. I don’t understand”.
What are some tips for using voice commands?
- Avoid noisy places.
- Speak with correct pronunciation.
- Be aware that the Google Assistant may be slow to recognize or act depending on the Wi-Fi connection status or Google server status.
- If you have any trouble or question about Google Assistant, say “Ok Google, Feedback”.
How can I control my TV and Sound Bar with voice commands?
- Connect your Sound Bar to Wi-Fi using the Google Home app.
- Connect your Sound Bar and TV using an HDMI cable.
- Say a voice command in English.
What are the requirements for controlling a TV with voice commands?
The TV must be a Web OS version 4.5 or later TV (LG TV models released after 2019 years).
What are some voice commands for controlling an LG TV?
| Commands | Action |
|---|---|
| Turn on LG TV | Turns on your LG TV. |
| Turn off LG TV | Turns off your LG TV. |
| Channel up on LG TV | Changes the channel to up. |
| Channel down on LG TV | Changes the channel to down. |
| Volume up on LG TV | Increases the volume of your LG TV. |
| Volume down on LG TV | Decreases the volume of your LG TV. |
| Mute LG TV | Mutes your LG TV. |
| LG TV unmute | Unmutes your LG TV. |
What are some voice commands for controlling the Sound Bar?
| Commands | Action |
|---|---|
| Turn off LG sound bar | Turns off your LG Sound Bar. |
| Switch function to Wi-Fi network | Changes to the Wi-Fi function. |
| Switch function to BLUETOOTH | Changes to the BT (Bluetooth) function. |
| Switch function to OPTICAL | Changes to the Optical function. |
| Switch function to HDMI ARC | Changes to the HDMI ARC function. |
| Switch function to HDMI | Changes to the HDMI function. |
| Switch function to USB | Changes to the USB function. |
| Set sound effect to STANDARD | Changes the sound effect to STANDARD. |
| Set sound effect to AI SOUND PRO | Changes the sound effect to AI SOUND PRO. |
| Set sound effect to MOVIE | Changes the sound effect to MOVIE. |
| Set sound effect to MUSIC | Changes the sound effect to MUSIC. |
| Set sound effect to BASS BLAST (BASS PLUS) | Changes the sound effect to BASS BLAST (BASS BLAST PLUS). |
| Display the input source information | Displays the input source information on the display window. |
| Enable Auto volume | Turns on Auto volume function. |
| Disable Auto volume | Turns off Auto volume function. |
| Enable Auto Power | Turns on Auto power function. |
| Disable Auto Power | Turns off Auto power function. |
| Enable Night Time | Turns on Night time mode. |
| Disable Night Time | Turns off Night time mode. |
| Enable DRC | Turns on DRC. |
| Disable DRC | Turns off DRC. |
| Enable TV remote | Turns on TV remote function. |
| Disable TV remote | Turns off TV remote function. |
| Enable Surround | Turns on Surround sound. |
| Disable Surround | Turns off Surround sound. |
| Enable Neural X | Turns on Neural X. |
| Disable Neural X | Turns off Neural X. |
Q: How do I use the “LG Wi-Fi Speaker” app?
The “LG Wi-Fi Speaker” app is provided by LG Electronics, and it allows you to use various functions of the speaker through your smart device. You should connect to Wi-Fi using the “Google Home” app before using the “LG Wi-Fi Speaker” app. With this app, you can listen to music on your smart device and home network server. You can also enjoy music content through the sound bar with Chromecast-enabled apps. Additionally, you can manage the sound bar settings and control the sound bar, even without a remote control. A wireless router must be connected to the internet, and a smart device must be connected to the wireless router via Wi-Fi. To install the app, tap the Apple “App Store” icon or “Google Play Store” icon, then type “LG Wi-Fi Speaker” in the search bar, and select “LG Wi-Fi Speaker” to download. The app is available for Android OS version 5.0 (or later) and iOS version 10 (or later). The “LG Audio” app can also be used to find the available application for this unit.
Q: What is Bluetooth wireless technology?
Bluetooth is a wireless communication technology for short-range connections. The sound may be interrupted if the connection is interfered with by other electronic waves, or if you connect via Bluetooth in other rooms. Connecting individual devices via Bluetooth does not incur any charges. A mobile phone with Bluetooth can be operated via the Cascade if the connection was made through Bluetooth. Available devices include smartphones, MP3 players, and notebooks. This speaker uses Bluetooth version 5.0 with the SBC codec and is compatible with the A2DP (Advanced Audio Distribution Profile).
Q: How do I connect a Bluetooth device to the speaker?
Before pairing, make sure the Bluetooth feature on your smart device is turned on. Turn on the speaker and connect to Wi-Fi. Select the Bluetooth function by pressing F repeatedly until “BT” and then “READY” appear on the display. Operate the Bluetooth device and perform the pairing operation. When searching for the speaker on your Bluetooth device, it may appear as “Speaker name (App setup)”. Select the “Speaker name (App setup)”. The speaker name is set up on the “Google Home” app. If the speaker name is set to “Living Room” in the “Google Home” app, you will see “Living Room” on your Bluetooth device. Once successfully connected, “PAIRED” [your device’s name] “BT” appears on the display. If the device name is not available, “-” will be displayed. Press J on the remote control to check the connected device’s name. Refer to your Bluetooth device’s user guide for specific instructions.
Q: How do I play music from a Bluetooth device?
Refer to your Bluetooth device’s user guide to play music. The volume level of the Bluetooth will be adjusted according to your Bluetooth device’s volume level. When using Bluetooth, keep the unit and the Bluetooth device as close as possible.
Q: What can interfere with the Bluetooth connection?
Obstacles between the unit and the Bluetooth device, and devices using the same frequency, such as medical equipment, microwaves, or wireless LAN devices, can interfere with the connection.
Q: What happens when an LG TV is connected via Bluetooth?
If the last connected device is an LG TV, the sound bar will connect to the TV automatically when you restart the sound bar. If the LG TV is turned off, the sound bar will enter “READY” (Bluetooth ready) mode. When the TV is turned back on, the sound bar will not reconnect automatically. To reconnect, you can say “Ok Google, connect Bluetooth,” or turn the sound bar off and back on, then follow the TV’s on-screen instructions.
Q: Does the unit support Bluetooth auto pairing?
Yes, this unit supports Bluetooth auto-pairing; however, it does not operate when you restart the unit, when you disconnect the unit yourself, or when you disconnect the unit on the connected Bluetooth device. The sound may be interrupted when the connection is interfered with by some other electronic wave.
Q: How many Bluetooth devices can be paired at once?
Pairing is limited to one Bluetooth device. Multi-pairing is not supported. Depending on the device type, you may not be able to use the Bluetooth function. The sound quality may be lower with more distance between the unit and the Bluetooth device. The Bluetooth connection will be disconnected when the unit is turned off or if the Bluetooth device gets too far from the unit.
Q: What happens when a Bluetooth device is not connected?
When a Bluetooth device is not connected, “READY” appears on the display window. If you change to another function after connecting a Bluetooth device, the Bluetooth connection will be disconnected. When you return to the Bluetooth function, the Bluetooth connection will connect automatically. If one Bluetooth device is connected, another device cannot find and connect to this unit. If you want to connect another device, disconnect the current device and try again.
Q: How can I use voice commands to connect Bluetooth?
If the speaker has paired with a Bluetooth device before, you can use “Google Assistant” to connect Bluetooth by saying “Connect”, “Connect to Bluetooth”, or “Ok Bluetooth”. To disconnect, say “Cancel”, “Unpair devices”, or “Clear all devices”. You can control the connected Bluetooth device from the unit using voice commands for play, pause, skip, and volume. This function is only available for Android OS and iOS and may not be supported depending on the Bluetooth device or TV.
Q: How do I edit the speaker name?
You can check and edit the speaker name on the “Google Home” app.
Q: How do I use my TV remote to control the sound bar?
You can control some functions of this unit with your TV remote, including volume up/down and mute. Press and hold SOUND EFFECT on the remote control for about 3 seconds. “ON – TV REMOTE” appears, and you can then control the unit with your TV remote. To check the status of this function, press and hold SOUND EFFECT on the remote control. To turn off this function, press and hold SOUND EFFECT on the remote control and press it once again while “ON – TV REMOTE” is scrolled. Ensure that the sound output of your TV is set to [External speaker]. This function does not operate on LG TV’s magic remote control. This function may not work well if some TV control functions, such as HDMI CEC, SIMPLINK, and LG Sound Sync, are set to ON. The function may also not work well when the unit and the TV are connected with an HDMI cable. Some remote controls may not be supported.
Q: How does the AUTO POWER function work?
This sound bar automatically turns on and off via an input source such as optical. To turn on this function, press AUTO POWER on the remote control and press it once again while “OFF – AUTO POWER” is scrolled. To check the status of this function, press AUTO POWER on the remote control. To turn off this function, press AUTO POWER on the remote control and press it once again while “ON – AUTO POWER” is scrolled. When you turn on your TV or an external device connected to this unit, the unit recognizes the input signal and selects the suitable function. When the TV is off, the sound bar switches to Networked standby mode. After being turned on by AUTO POWER, the unit will automatically turn off if there is no signal from the TV (via LG Sound Sync Optical) or the external device for a certain period of time. If you turn off the unit directly, it cannot be turned on automatically by AUTO POWER. However, the unit can be turned on by AUTO POWER when an optical signal comes in after 5 seconds of no signal. When you turn on the unit for the first time, the status of the Auto Power function is turned on. You can only set the AUTO POWER function when this unit is turned on. The function may not work depending on the connected device.
Q: How does auto function change work?
This sound bar recognizes input signals such as Optical, HDMI ARC, Bluetooth, and “LG Wi-Fi Speaker” app and then changes the function automatically. When you turn on your TV or an external device connected by Optical, LG Sound Sync (Optical), or HDMI ARC, the sound bar will change to a suitable function. When you try to connect a Bluetooth device, the Bluetooth function is selected. When you play music through the “LG Wi-Fi Speaker” app, the sound bar changes the function to Wi-Fi. This unit does not change to the optical function if SIMPLINK of the connected TV, Blu-ray disc player, or set-top box is set to on. If you want to use the auto-function change, turn off the SIMPLINK function on your LG TV (it takes about 30 seconds to turn off SIMPLINK).
Q: How do I disconnect the wireless network connection or the wireless device?
Turn off the unit by pressing the power button for more than 3 seconds.
Q: How do I put the speaker in standby mode?
The speaker switches to standby mode if there is no music playback or button operation. If you press and hold 1 for about 3 seconds, the speaker switches to standby mode, and “GOOD-BYE” appears on the display. All wireless network ports are deactivated. The speaker also switches to Networked standby mode if music is not played and buttons are not pressed for 15 minutes or if you press 1.
Q: How do I reset the speaker?
If the speaker does not respond, reset it by pressing and holding the > on the unit until you hear a beep sound once. You will see “RESET” on the display window, and all stored wireless network information will be deleted.
Q: What should I do if the unit does not work properly?
Turn off the power of the unit and connected external devices and then turn them on again. Disconnect the power cord of the unit and connected external devices, and then try connecting again. Note that previous settings may not be saved when the device power is shut off.
Q: What should I do if the power does not turn on?
Check if the power cord is plugged into the outlet, and if not, connect the power plug to the outlet.
Q: What should I do if no sound is produced?
Adjust the volume. If you are using a connection with an external device, adjust the volume level of the device. Check if the mute function is activated, and if so, press [ or adjust the volume level to cancel the mute function. Make sure the function selected is correct.
Q: What should I do if there is no woofer sound?
Check if the subwoofer is plugged in, and if not, plug the power cord of the subwoofer into the wall outlet securely. Also, check if the pairing between the unit and the subwoofer is disconnected. If it is disconnected, reconnect the unit and the subwoofer.
Q: What should I do if the remote control does not work properly?
Operate the remote control within about 7m. Remove any obstacles in the path of the remote control and the unit. Replace the batteries in the remote control with new ones.
Q: What should I do if the AUTO POWER function does not work?
Check the connection of the external device, such as TV or DVD/Blu-ray player. Check the state of SIMPLINK on your LG TV and turn off SIMPLINK. The function may not operate depending on the connected device.
Q: What should I do if the LG Sound Sync does not work?
Check if your LG TV supports LG Sound Sync (Wired). Check the connection of LG Sound Sync (Wired). Also, check the sound settings of your TV and the unit.
Q: What should I do if the output sound of the unit is low?
Switch the state of the DRC function to [OFF] by using the “LG Wi-Fi Speaker” app. With the sound bar connected to the TV, change the AUDIO DIGITAL OUT setting on the TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM]. With the sound bar connected to a Player, change the AUDIO DIGITAL OUT setting on the Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or [BITSTREAM]. Change the Audio DRC setting on the connected device setup menu to [OFF] state. Make sure that Night Time mode is not On and turn it off.
Q: What should I do if the USB is not recognized?
Format the USB device and connect it again. When formatting the USB device, select an available file system.
Q: What should I do if Bluetooth pairing does not work well?
Make sure your Bluetooth device is on. Switch Bluetooth off and on again on your Bluetooth device, then try pairing again. Remove obstacles between the Bluetooth device and the unit. Your device may not be able to pair due to the type of Bluetooth device or the surrounding environment.
Q: What should I do if the unit does not connect with a Bluetooth device?
Make sure the speaker connects to Wi-Fi by using the “Google Home” app.
Q: What should I do if voice recognition does not work well?
The speaker may not be recognized because of the surrounding noise. Instead of “Ok Google”, press. Check if the microphone is muted and press > on the unit.
Q: What should I do if I cannot connect the speaker to my home network?
Wireless communication may be interrupted by household devices using radio frequencies. Move the speaker away from them. Check your router and try turning it off and back on. Make sure that the Wi-Fi feature is turned on in your smart device. Ensure that the speaker and your smart device are connected to the same Wi-Fi.
Q: What should I do if the Wi-Fi connection does not work well?
If you restart the router, you need to turn the speaker’s power off and on again. If you install a new router, you need to perform a factory set and set up the network connection for the speaker.
Q: What should I do if the application doesn’t work properly?
Make sure that your smart device is compatible with the app. Make sure that the application is the latest version. Ensure that the connected unit is turned on.
Q: What should I do if this device has wireless interference?
Wireless may not operate normally in a weak signal area. Install the device close enough to the wireless subwoofer. Do not install the device on metal furniture for optimum performance. Bluetooth devices may malfunction or make noise when any part of your body contacts the transceiver of the Bluetooth device or sound bar, when there is an obstacle or wall, or when the device is installed in a secluded spot. If there is a device using the same frequency (wireless LAN, medical equipment, or microwave), make the distance between the products as far away as possible. When connecting the device to the Bluetooth device, make the distance between the products as close as possible. When the device gets too far from the Bluetooth device, the connection may be disconnected, and malfunctions may occur.
Q: How do I release demo mode?
If you cannot change the input source with F such as BT (Bluetooth), HDMI, etc., and only [DEMO] is showing in the front display, unplug the power cord and plug it in again. If that doesn’t work, after setting the volume to minimum, press and hold F for about 5 seconds on the main unit until the display indicates the current selected function.
Q: What are the available file extensions for playback?
The available file extensions are “.mp3”, “.aac”, “.ogg”, “.flac”, and “.wav”.
Q: What are the sampling frequencies for different file types?
- MP3: within 32 to 48 kHz
- OGG: within 32 to 48 kHz
- AAC: within 32 to 48 kHz
- FLAC: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, and 192 kHz (16 bit/ 24 bit)
- WAV: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, and 192 kHz (16 bit/ 24 bit)
Q: What are the bitrate resolutions for different file types?
- MP3: within 8 to 320 kbps
- OGG: within 64 to 320 kbps
- AAC: within 8 to 320 kbps
Q: Are there any restrictions on file playback?
The file requirements are not always compatible. There may be some restrictions by file features and the media server’s ability. Depending on the type of file or ways of recording, it may not play back. Some DRM-loaded files are not supported. The types of supported files may differ depending on the operating system and/or the manufacturer of the smart device and PC.
Q: What is the networked standby power consumption?
The networked standby power consumption is 5.0 W (if all network ports are activated).
Q: What are the available digital input audio sampling frequencies?
The available digital input audio sampling frequencies are 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, and 192 kHz.
Q: What are the available digital input audio formats?
The available digital input audio formats are Dolby Atmos, Dolby Audio, DTS:X, DTS-HD, and PCM.
Q: What are the sound bar’s input and output specifications?
- OPTICAL IN: 3 V (p-p), Optical jack x 1
- HDMI IN: 19 Pin (Type A, HDMI™ connector) x 1
- HDMI OUT: 19 Pin (Type A, HDMI™ connector) x 1, supports 1080p, 1080i, 720p, 576p, 480p, 2160p@24/25/30 Hz 4:4:4, 2160p@60/50 Hz 4:2:0, and 4K Sources dependent on HDCP 2.3 are supported at 4K resolutions
Q: What is the RMS output of the amplifier?
- Total: 440 W RMS
- Front: 40 W RMS x 2 (4 Ω at 1 kHz, THD 10 %)
- Center: 40 W RMS (4 Ω at 1 kHz, THD 10 %)
- Top: 50 W RMS x 2 (4 Ω at 1 kHz, THD 10 %)
- Subwoofer: 220 W RMS (3 Ω at 80 Hz, THD 10 %)
Q: What are the specifications of the wireless subwoofer?
- Type: 1 Way 1 Speaker
- Impedance: 3 Ω
- Rated Input Power: 220 W RMS
- Max. Input Power: 440 W RMS
Q: What are the specifications of the optional wireless receiver (SPK8-S)?
- Rear: 70 W RMS x 2 (3 Ω at 1 kHz, THD 10 %)
Q: What are the specifications of the optional rear speakers (each)?
- Type: 1 Way 1 Speaker
- Impedance: 3 Ω
- Rated Input Power: 70 W RMS
- Max. Input Power: 140 W RMS
Q: How should I handle the unit when shipping?
Save the original shipping carton and packing materials. To ship the unit, repack it as it was originally packed at the factory.
Q: How do I keep the exterior surfaces clean?
Do not use volatile liquids such as insecticide spray near the unit. Wiping with strong pressure may damage the surface. Do not leave rubber or plastic products in contact with the unit for a long period of time.
Q: How do I clean the unit?
To clean the unit, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface.
CLICK HERE TO DOWNLOAD LG SN8YG (02) PDF MANUAL