LG SH85TH-W (01) PDF DOCUMENT

Please adhere to the following safety guidelines when operating your device:

Electric Shock and Hazard Prevention:

• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). There are no user-serviceable parts inside. Refer servicing to qualified service personnel.

• To prevent fire or electric shock hazards, do not expose this product to rain or moisture.

• The apparatus should not be exposed to water (dripping or splashing), and no objects filled with liquids, such as vases, should be placed on it.

Installation:

• Do not install this equipment in a confined space such as a bookcase or similar unit.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Openings are provided for ventilation to ensure reliable operation and protect from overheating. Never block these openings by placing the product on a bed, sofa, rug, or other similar surface.

Power Cord Safety:

• It is recommended that the appliance be placed on a dedicated circuit. Do not overload wall outlets.

• Periodically examine the power cord. If it shows damage or deterioration, unplug it and have it replaced by an authorized service center.

• Protect the power cord from physical or mechanical abuse. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

• To disconnect power, pull out the mains cord plug. Ensure the plug is easily accessible when the product is installed.

Laser Safety:

• This product employs a Class 1 Laser System. To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser radiation is present when the enclosure is open. DO NOT STARE INTO BEAM.

To safely remove the battery or battery pack from the equipment, follow the assembly steps in reverse order. To prevent environmental contamination and potential health threats, dispose of the old battery in the appropriate container at designated collection points. It is recommended to use local, free reimbursement system batteries and accumulators. The battery should not be exposed to excessive heat from sources like sunshine or fire.

This system includes several unique features:

• Portable In: Allows you to listen to music from your portable devices like MP3 players, notebooks, etc.

• USB Direct Recording: You can record music directly from a CD to your USB device.

• Full HD up-scaling: Provides Full HD picture quality with a simple setup.

• Home Theater Speaker ez Setup: Enables listening to sound from TV, DVD, and other digital devices with vivid 5.1, 2.1, or 2.0 channel mode.

Please check and identify the supplied accessories:

• Remote control (1)

• Battery (1)

• FM antenna (1)

• AM antenna (1)

• Speaker cables (5)

• Video cable (1)

This unit can play the following disc formats:

• DVD-VIDEO: 8 cm / 12 cm discs, such as pre-recorded movies.

• DVD±R: 8 cm / 12 cm discs, video mode and finalized only. Also supports double layer DVD+R.

• DVD±RW: 8 cm / 12 cm discs, video mode and finalized only.

• Audio CD: Music CDs or CD-R/CD-RW in music CD format.

The unit can play discs containing Audio titles, DivX, MP3, WMA, and/or JPEG files. Note that some discs may not play due to recording quality, physical condition, or characteristics of the recording device and software.

File Compatibility Requirements:

MP3/WMA Music Files:

• Sampling frequency: 32 to 48 kHz

• Bit rate: 32 to 320 kbps (MP3), 40 to 192 kbps (WMA)

• Support Version: v2, v7, v8, v9

• Maximum files: Under 999

• File extensions: “.mp3” / “.wma”

• CD-ROM file format: ISO9660/JOLIET

Photo Files:

• Max pixel width: 2760 x 2048 pixels

• Maximum files: Under 999

• File extensions: “.jpg”

• CD-ROM file format: ISO9660/JOLIET

DivX Files:

• Available resolution: within 720 x 576 (W x H) pixels.

• Subtitle file name: within 45 characters.

• Frame rate: less than 30 fps.

• Playable file extensions: “.avi”, “.mpg”, “.mpeg”, “.divx”

• Playable Subtitle formats: SubRip (*.srt/*.txt), SAMI (*.smi), SubStation Alpha (*.ssa/*.txt), MicroDVD (*.sub/*.txt), SubViewer 2.0 (*.sub/*.txt), Vobsub (*.sub)

• Playable Codec formats: “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “MP4V3”, “3IVX”

• Playable Audio formats: “AC3”, “PCM”, “MP3”, “WMA”

This unit has a regional code printed on its rear. It can only play DVD discs that are labeled with the same regional code or with “ALL”. Most DVD discs have a globe icon with one or more numbers on the cover, which must match your unit’s regional code for the disc to play. If you attempt to play a DVD with a different regional code, the message “Check Regional Code” will appear on the TV screen.

1. Assembling the Speaker Stands:

Before connecting, assemble the speakers. Attach the speakers to the speaker stands by rotating the screws provided in the package.

2. Attaching the Speaker Wires to the Unit:

Match each wire’s colored band to the same colored connection terminal on the rear of the main unit. To connect a wire, press the plastic finger pad on the terminal to open it, insert the wire, and then release the finger pad to secure it.

3. Connecting the Wires to the Speakers:

Connect the other end of each wire to the correct speaker according to the color coding below. Connect the black end of each wire to the terminals marked – (minus) and the other end to the terminals marked + (plus).

Speaker Connection Color Code:

Color	Speaker	Position
Grey	Rear	Rear right
Blue	Rear	Rear left
Green	Center	Center
Orange	Subwoofer	Any front position
Red	Front	Front right
White	Front	Front left

CAUTION: Be careful to ensure children do not put their hands or any objects into the speaker duct (the hole for bass sound on the speaker cabinet). Also, the speakers contain magnets, which may cause color irregularity on a TV or PC monitor screen. Keep speakers away from TV screens or PC monitors.

For the best possible surround sound, all speakers except the subwoofer should be placed at the same distance from your listening position.

• Front Left (L) and Front Right (R) Speakers: Place these to the sides of your TV or monitor, flush with the screen surface if possible.

• Center Speaker: Place the center speaker directly above or below the TV or monitor.

• Surround Left (L) and Surround Right (R) Speakers: Place these speakers behind your listening position, facing slightly inwards.

• Subwoofer: The position of the subwoofer is less critical as low bass sounds are not highly directional. However, it is better to place it near the front speakers. Turn it slightly toward the center of the room to reduce wall reflections.

You can connect your system to a TV using one of the following methods, depending on your TV’s capabilities. Use only one video connection method.

HDMI Connection (Best Quality):

1. Connect an HDMI cable from the HDMI OUT jack on the rear of the unit to an HDMI IN jack on your TV.

2. Set your TV’s input source to the corresponding HDMI input.

3. With an HDMI connection, you can change the output resolution up to 1080p.

Component Video Connection (Better Quality):

1. Connect a component video cable (Red, Blue, Green) from the COMPONENT VIDEO OUTPUT (Y PB PR) jacks on the unit to the corresponding input jacks on your TV.

2. You can hear the sound through the system’s speakers.

Video (Composite) Connection (Good Quality):

1. Connect a composite video cable (Yellow) from the VIDEO OUT jack on the unit to the VIDEO IN jack on your TV.

2. You can hear the sound through the system’s speakers.

Note: Always connect the unit directly to the TV, not through a VCR, as the image could be distorted by copy protection systems.

You can change the output resolution for the HDMI and Component Video outputs. The available resolutions depend on the connection type:

• [HDMI OUT]: 1080p, 1080i, 720p, 480p (or 576p), and 480i (or 576i)

• [COMPONENT VIDEO OUT]: 480p (or 576p) and 480i (or 576i)

• [VIDEO OUT]: Fixed at 480i (or 576i)

To change the resolution:

1. Press HOME on the remote.

2. Use the < / > buttons to select the [Setup] icon and press ENTER.

3. Use the ∧ / ∨ buttons to select the [Display] option, then press >.

4. Use the ∧ / ∨ buttons to select [Resolution], then press >.

5. Use the ∧ / ∨ buttons to select your desired resolution and press ENTER to confirm.

Note: If your TV does not accept the selected resolution and you get a blank screen, press and hold the STOP button on the front panel for more than 5 seconds. This will reset the resolution to 480p (or 576p).

Connecting a Portable Player or External Device:

You can connect a portable music player (like an MP3 player) or another external audio device in two ways:

• PORT. IN Jack: Connect the device’s headphone output to the PORT. IN jack on the front of the unit using a 3.5mm stereo cable.

• AUX IN Jack: Connect the device’s line output to the AUX (L/R) INPUT jacks on the rear of the unit using an RCA cable.

To listen to music from the connected device:

1. Connect the device using one of the methods above.

2. Turn on the power by pressing POWER.

3. Press RADIO&INPUT repeatedly to select the [PORTABLE] or [AUX] function.

4. Turn on your portable player or external device and start playback.

Connecting a USB Device:

1. Connect a USB memory stick or MP3 player to the USB port on the front of the unit.

2. The unit supports flash-type MP3 players and USB flash drives (USB 2.0 or 1.1). Devices requiring additional program installation are not supported.

3. Only FAT16/32 file systems are supported. NTFS is not supported.

4. Do not extract the USB device during operation to prevent data loss.

To safely remove the USB device:

1. Choose a different function mode or press STOP twice in a row.

2. Remove the USB device from the unit.

Listening to the Radio

1. Ensure the FM and AM antennas are connected.

2. Press RADIO&INPUT until FM or AM appears in the display window.

3. To automatically scan for stations, press and hold TUNING (-/+) for about two seconds. Scanning will stop when a station is found. To tune manually, press TUNING (-/+) repeatedly.

4. Adjust the volume using the VOLUME knob on the front panel or VOL (+/-) on the remote.

Presetting Radio Stations

You can preset up to 50 stations for FM and AM.

1. Tune to the desired station.

2. Press ENTER. A preset number will flash in the display.

3. Press PRESET (-/+) to select the preset number you want to assign.

4. Press ENTER to store the station.

Deleting Stations

• To delete a single saved station: Use PRESET (-/+) to select the station you want to delete. Press CLEAR, then press CLEAR again to confirm.

• To delete all saved stations: Press and hold CLEAR for two seconds. “ERASE ALL” will flash. Press CLEAR again to erase all stations.

Improving FM Reception

If FM reception is poor, press PLAY, MONO/STEREO on the remote control. This will switch the tuner from stereo to mono, which usually improves the reception.

You can select a desired sound mode by pressing SOUND EFFECT on the remote. The available sound modes are:

On Display	Description
NAT PLUS	Enjoy a natural sound effect similar to a 5.1-channel experience.
NATURAL	Enjoy comfortable and natural sound.
AUTO EQ	Realizes the sound equalizer that is most similar to the genre included in the MP3 ID3 tag of song files.
POP, CLASSIC, JAZZ, ROCK	Lends an enthusiastic atmosphere to the sound, giving the feeling of being at a live concert.
MP3 OPT	Optimized for compressible MP3, WMA files, improving the treble sound.
BASS	During playback, reinforces the treble, bass, and surround sound effect.
LOUDNESS	Improves the bass and treble sound.
VIRTUAL	Enjoy more virtual surround sound.
PLII MOVIE / PLII MUSIC	Dolby Pro Logic II enables you to play a stereo source on a 5.1-channel system.
BYPASS	Plays the sound without any equalizer effect.

Additionally, the system offers various regionally optimized sound effects like DANGDUT, ARABIC, PERSIAN, and more under the “Local specialization equalizer” setting.

Note: In some surround modes, sound may not come from all speakers. This depends on the audio source and the selected mode and is not a defect.

1. Press HOME on the remote to display the Home Menu.

2. Use the < / > buttons to select the [Setup] icon and press ENTER.

3. The Setup menu will appear. You can navigate through the options using the remote control buttons as described below:

Menu Action	Buttons	Operation
Move	∧ ∨	Moving to another menu.
Move	<	Moving to the previous level.
Move	>	Moving to the next level or selecting a menu.
Select	ENTER	To confirm a menu selection.
Close	RETURN	To exit the [Setup] menu or [5.1 Speaker Setup].

4. To exit the Setup menu at any time, press HOME or RETURN.

1. In the [Setup] menu, navigate to the [Audio] menu.

2. Select [5.1 Speaker Setup] and press ENTER. The [5.1 SPEAKER] setup screen will appear.

3. Use the < / > buttons to select the speaker you wish to adjust (e.g., Front L, Center, SubWoofer, etc.).

4. Use the ∧ / ∨ / < / > buttons to adjust the following options for the selected speaker:

• [Size]: Speaker settings are fixed and cannot be changed.

• [Volume]: Press < / > to adjust the output level. The range for Front L/R is 0 to -5. The range for SubWoofer, Rear L/R, and Center is 5 to -5.

• [Distance]: If the Center or Rear speakers are further from your listening position than the Front speakers, you can adjust the delay. Press < / > to adjust the distance, which allows the sound from all speakers to reach you at the same time.

• [Test]: To test the speaker levels, use ∧ / ∨ to select [Speaker Test Start] and press ENTER. A test tone will be emitted from each speaker. Press ENTER again to stop the test. You can adjust the volume to match the test signals.

5. Press RETURN to go back to the previous menu.

The Parental Control feature allows you to restrict playback of certain DVDs based on their rating.

Initial Setup (Setting Password and Area Code):

When using the Lock menu for the first time, you must set a password and an area code.

1. In the [Setup] menu, select [Lock] and press >.

2. Press > again. You will be prompted to create a password. Input a 4-digit password, press ENTER, then re-enter it and press ENTER to verify. If you make a mistake, press CLEAR.

3. After setting the password, you must set an Area Code. Select the first character using ∧ / ∨ buttons, press ENTER, then select the second character and press ENTER to confirm. Use the Area Code list in the manual for reference.

Setting a Rating Level:

1. Select [Rating] in the [Lock] menu and press >.

2. Enter your password and press ENTER.

3. Select a rating from 1 to 8 using the ∧ / ∨ buttons. Rating 1 is the most restrictive, and 8 is the least restrictive.

4. Select [Unlock] if you want to disable parental control completely.

5. Press ENTER to confirm your selection.

Changing the Password:

1. In the [Lock] menu, select [Password] and press ENTER.

2. Highlight [Change], press ENTER, and enter your new password twice for verification.

If you forget your password: Select the [Setup] menu, input the 6-digit number “210499”, and press ENTER. The password will be cleared.

Basic Playback Control Functions:

To	Do this
Stop	Press STOP.
Playback	Press PLAY, MONO/STEREO.
Pause	Press PAUSE/STEP.
Frame-by-Frame playback (DVD, DivX only)	Press PAUSE/STEP repeatedly to advance frame by frame.
Skipping to the next/previous chapter/track/file	Press SKIP (◄◄ or ►►I) to go to the next or previous item. Press SKIP (◄◄) twice briefly to step back to the previous chapter/track/file.
Fast forward or fast reverse	During playback, press SCAN (◄◄ or ►►) repeatedly to select the desired scan speed. Press PLAY to return to normal speed.
Playing repeatedly or randomly	Press REPEAT repeatedly to cycle through repeat modes (e.g., Chapter, Title, All, Random, Off).
Slowing down the playing speed (DVD, DivX only)	In pause mode, press SLOW (◄ or ►) to select the required speed.

Other Playback Features:

• Resume Playback: If you press STOP once, the unit remembers the stop point. Press PLAY, MONO/STEREO to resume from that point. If you press STOP twice or unload the disc, the resume point is cleared.

• Displaying Disc Information: During playback, press INFO/DISPLAY to see information like Title/Chapter number, elapsed time, audio language, and subtitles.

• Displaying DVD Menu/Title: Press DISC MENU to access the disc’s menu. Press TITLE to access the title menu.

• 1.5 Times Speed Playback (DVD): During playback, press PLAY, MONO/STEREO. “►X1.5” will appear on screen. Press the button again to return to normal speed.

• Marked Playback (MP3/WMA/ACD): While viewing a list of music files, highlight a file and press MARKER to add a mark. You can then choose to play only the marked files.

• Start Play from a Selected Time (DVD/DivX): Press INFO/DISPLAY, select the time clock icon, and use the numerical buttons to enter the start time (HH:MM:SS).

1. Insert a disc with photo files or connect a USB device.

2. Go to the [Home] menu and select [Photo].

3. A list of folders and files will appear. Use ∧ / ∨ to select a folder and press ENTER.

4. To view a single photo, highlight it and press ENTER.

5. To start a slide show, highlight any photo in the list and press PLAY, MONO/STEREO.

Options while viewing a photo in full screen:

Press INFO/DISPLAY to bring up an options menu at the bottom of the screen. You can then:

• Use < / > to view the previous/next photo.

• Slide Show: Press ENTER to start or pause the slide show.

• Speed: Select different speeds (x1, x2, x3) for the slide show transitions.

• Rotate: Press ENTER to rotate the photo.

• Go to list: Press ENTER to return to the file list menu.

You can record music from a CD or other sources to a connected USB device.

1. Connect your USB device to the USB port.

2. Select the source you want to record from (e.g., CD, Tuner, AUX).

3. Start playing the music or sound source.

4. Press REC on the remote to start recording.

• You can record all tracks from a CD by pressing REC while the disc is stopped.

• You can record specific tracks by creating a marked playlist first (see Marked Playback) and then starting the recording.

5. To stop recording, press STOP.

Important Notes for USB Recording:

• During recording of MP3/WMA files, there is no sound output.

• Do not remove the USB device or turn off the unit during recording, as this may create an incomplete file.

• Recording through a microphone is not available.

• Multi-card readers and external HDDs cannot be used for USB recording.

• You cannot record more than 999 files.

• Unauthorized copying of copyrighted material is an infringement of copyrights.

This unit supports Bluetooth for wireless audio streaming (A2DP profile). The available range is up to 10 meters.

Pairing your Bluetooth device TO this unit (Streaming from your phone/device):

1. Press RADIO&INPUT to select the Bluetooth function. The display will show “BT” and then “BT READY”.

2. On your Bluetooth device (e.g., smartphone), turn on Bluetooth and search for devices. Your unit will appear as “LG Audio”.

3. Select “LG Audio” from the list on your device. If prompted for a PIN code, enter 0000.

4. Once successfully paired, the display will show “BT SINK” and you can play music from your device through the unit’s speakers.

Pairing this unit TO your Bluetooth device (Streaming TO Bluetooth headphones/speakers):

1. Select a function other than Bluetooth on the unit (e.g., CD, USB).

2. Place your Bluetooth device (e.g., headphones) in pairing mode within 1 meter of the unit.

3. Press and hold the BLUETOOTH button on the remote. The display will show “INQUIRY”.

4. A list of found devices will appear on the unit’s display. Use ∧ / ∨ to select your device and press ENTER.

5. If prompted for a PIN, enter 0000 using the numerical buttons and press ENTER.

6. When successfully paired, “BT SRC” will appear on the display, and sound will be output to your Bluetooth device.

Connecting and Disconnecting:

After pairing, you can press the BLUETOOTH button to connect or disconnect with a paired device.

Disc Care:

• Handling: Do not stick paper or tape on the disc surface.

• Storing: After playing, store discs in their cases. Do not expose them to direct sunlight or heat sources.

• Cleaning: Use a soft cloth to wipe the disc from the center outwards. Do not use strong solvents like alcohol, benzine, or commercially available cleaners.

Unit Care:

• Cleaning: Use a soft, dry cloth to clean the exterior. For heavy dirt, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents.

• Maintenance: This is a precision device. If the optical pick-up lens or disc drive parts become dirty or worn, picture quality may diminish. For details, contact an authorized service center.

• Shipping: Save the original shipping carton and packing materials. If you need to ship the unit, re-pack it as it was originally packed for maximum protection.

SIMPLINK is a feature that allows you to control certain functions of this unit using your LG TV’s remote control. For this to work, the unit and an LG TV with SIMPLINK must be connected via an HDMI cable (version 1.2A or higher is recommended).

Controllable functions by the LG TV remote may include Play, Pause, Scan, Skip, Stop, and Power Off. The LG TV must have the SIMPLINK logo. For detailed information on using this feature, please refer to your TV owner’s manual.

PROBLEM	CAUSE	CORRECTION
No power	The power cord is disconnected.	Plug the power cord into the wall outlet securely.
No picture	The TV is not set to receive the DVD signal.	Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen.
	The video cables are not connected securely.	Connect the video cables securely to both the TV and unit.
There is little or no sound	Equipment connected via the audio cable is not set to receive DVD signal output.	Select the correct input mode of the unit so you can hear the sound from the unit.
	The audio cables are not connected to the speakers or unit securely.	Connect the audio cables into the connection terminals correctly.
	The audio cables are damaged.	Replace with a new audio cable.
The DVD picture quality is poor	The disc is dirty.	Clean the disc using a soft cloth with outward strokes.
A DVD/CD will not play	No disc is inserted.	Insert a disc.
	An unplayable disc is inserted.	Insert a playable disc (check the disc type, colour system and regional code).
	The disc is inserted upside down.	Place the disc with the label or printed side facing upwards.
	There is a parental lock which prevents the playback of DVDs with a certain rating.	Enter your password or change the rating level.
Humming noise heard while a DVD or CD is playing	The disc is dirty.	Clean the disc using a soft cloth with outward strokes.
	The unit is located too close to the TV, causing feedback.	Move unit and audio components further away from your TV.
Radio stations can’t be tuned in properly	The antenna is positioned or connected poorly.	Check the antenna connection and adjust its position. Attach an external aerial if necessary.
	The signal strength of the radio station is too weak.	Tune to the station manually.
	No stations have been preset or preset stations have been cleared.	Preset some radio stations, see page 34 for details.
The remote control doesn’t work well / at all	The remote is not pointed directly at the unit.	Point the remote directly at the unit.
	The remote is too far from the unit.	Use the remote within 23 feet (7m) of the unit.
	There is an obstacle in the path between the remote control and the unit.	Remove the obstacle.
	The battery in the remote control is flat.	Replace the battery with a new one.

General

• Power requirements: Refer to main label.

• Power consumption: Refer to main label.

• Dimensions (W x H x D): 360 x 62.5 x 312.3 mm without foot

• Net Weight (Approx.): 2.8 kg

• Operating temperature: 41 °F to 95 °F (5 °C to 35 °C)

• Bus Power supply (USB): DC 5 V, 500 mA

Tuner

• FM Tuning Range: 87.5 to 108.0 MHz or 87.50 to 108.00 MHz

• AM Tuning Range: 522 to 1620 kHz, 520 to 1710 kHz or 522 to 1710 kHz

Amplifier

• Stereo mode: 136 W + 136 W (4 Ω at 1 kHz)

• Surround mode:

– Front: 136 W + 136 W (4 Ω at 1 kHz)

– Center: 136 W (4 Ω at 1 kHz)

– Surround: 136 W + 136 W (4 Ω at 1 kHz)

– Subwoofer: 170 W (3 Ω at 60 Hz)

Inputs/Outputs

• VIDEO OUT: 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1

• COMPONENT VIDEO OUT: (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1, (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2

• HDMI OUT (video/audio): 19 pin (HDMI standard, Type A), HDMI Version: 1.2 A

• ANALOG AUDIO IN: 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1

• DIGITAL IN (OPTICAL): 3 V (p-p), Optical jack x 1

• PORT. IN: 0.5 Vrms (3.5 mm stereo jack)

Speakers

• Front/Rear Speaker: 2 Way 2 speaker, 4 Ω Impedance, 136 W Rated Input Power, 272 W Max. Input power, Dimensions: 270 x 1022 x 225 mm, Weight: 2.5 kg

• Center Speaker: 2 Way 2 speaker, 4 Ω Impedance, 136 W Rated Input Power, 272 W Max. Input power, Dimensions: 200 x 103 x 88 mm, Weight: 0.45 kg

• Passive Subwoofer: 1 Way 1 speaker, 3 Ω Impedance, 170 W Rated Input Power, 340 W Max. Input power, Dimensions: 190 x 385 x 275 mm, Weight: 4.3 kg

Designs and specifications are subject to change without prior notice.