LG OLED77G7V-Z (01) PDF Document

The accessories included with your LG OLED77G7V-Z television are model-dependent. For the OLED77G7* model, the following items are typically included:

• Remote control with AA batteries and a CR2032 coin battery

• User manual/documentation

• Cable management accessories

• A soundbar/stand base (labeled ‘b’)

• A hardware kit (labeled ‘c’) containing:

– 18 x M4 x L12 screws

– 2 x miscellaneous hardware pieces

– 2 x M8 x L77 screws

– 2 x miscellaneous hardware pieces

– 2 x M8 x L25 screws

For information regarding the power supply and power consumption of your LG OLED77G7V-Z, please refer to the label attached to the product itself.

Please follow these steps to assemble the stand for your LG OLED77G7V-Z:

1. Place the TV screen-down on a cushioned surface. Unfold the stand base from its packaging position.

2. Rotate the stand base up by 90 degrees until it is perpendicular to the screen.

3. Remove the protective cover from the back of the stand base.

4. Set the selector switch on the back of the stand to “STAND TYPE”.

5. Using the screws labeled ‘c’ (M4 X L12), secure the back plate to the stand. You will use 18 of these screws.

6. Attach the rear cover plates using the designated screws, also from hardware pack ‘c’.

7. Open the small cover on the back of the stand to access the connection area.

8. Attach the main soundbar component (labeled ‘b’) to the front of the stand base.

9. Carefully lift the TV and place it onto the fully assembled stand base, ensuring it is securely seated.

10. The assembly is complete, and the TV is ready to be placed on a stable surface.

Your LG OLED77G7V-Z has several ports for connecting external devices. Here is a guide to the common connections:

• **ANTENNA/CABLE IN:** Connect your antenna or cable TV service to this port using an RF coaxial cable.

• **HDMI IN:** Connect devices like Blu-ray players, game consoles, or computers using an HDMI cable for high-quality video and audio.

• **HDMI IN/ARC:** This specific HDMI port supports Audio Return Channel (ARC). Use this port to connect an ARC-compatible sound system, which allows the TV to send audio back to the system through the same HDMI cable.

• **USB IN:** Connect USB storage devices like flash drives or external hard drives to view photos, watch videos, or listen to music.

• **LAN:** Connect an Ethernet cable from your router to this port for a wired internet connection.

• **AUDIO OUT/H/P OUT:** Connect headphones to this 3.5mm port for private listening.

• **Satellite IN:** If you have a satellite dish, connect its coaxial cable to this port.

• **OPTICAL DIGITAL AUDIO OUT:** Connect to an external audio system (like a soundbar or home theater receiver) using an optical audio cable for high-quality digital sound.

• **PCMCIA CARD SLOT:** Insert a CI module here to view encrypted (pay) services in digital TV mode.

• **AV IN / COMPONENT IN:** Use adapter cables to connect older devices that use composite (Yellow, Red, White) or component (Green, Blue, Red, plus Red, White for audio) connections.

Your LG OLED77G7V-Z comes with two remote controls, each requiring different battery installation methods.

For the Magic Remote (requires AA batteries):

1. Press the release button at the bottom of the remote and slide the battery cover off.

2. Insert two AA batteries, making sure to match the ‘+’ and ‘-‘ ends with the markings inside the compartment.

3. Slide the battery cover back on until it clicks into place.

For the Slim Remote (requires CR2032 coin battery):

1. Use a coin to turn the battery cover counter-clockwise to unlock and remove it.

2. Insert one CR2032 battery with the ‘+’ side facing up.

3. Place the cover back on and use the coin to turn it clockwise to lock it.

To turn on your LG OLED77G7V-Z, you can either press the power button on the remote control or press the physical power button located on the bottom center of the TV’s stand/soundbar base. The LG logo will appear on the screen, indicating that the TV is turning on.

The specifications for the LG OLED77G7V-Z model are as follows:

To ensure the safe operation of your LG OLED77G7V-Z, please follow these safety instructions:

• **Environment:** Do not place the TV in locations exposed to direct sunlight, high humidity (like a bathroom), near heat sources, kitchen counters (exposed to steam or oil), or near containers of water.

• **Power Connection:** Do not touch the power plug with wet hands. Ensure the power plug is completely dry and free of dust before use. Always connect the power cable to a compliant AC mains socket with a grounded earth pin. Insert the plug completely into the wall socket to prevent fire hazards.

• **Power Cord:** Keep the power cord away from hot objects like heaters. Do not place heavy objects on the power cord. Periodically examine the cord for any damage or deterioration.

• **Cabling:** When mounting the TV on a wall, ensure all cables are neatly installed and isolated from the rear of the TV to prevent electric shock or fire hazards.

• **Children’s Safety:** Keep anti-moisture packing material and vinyl packing out of the reach of children. Do not let children climb or cling to the TV, as it may fall and cause serious injury. Dispose of used batteries carefully to prevent consumption by a small child.

• **Foreign Objects:** Do not insert metal objects like chopsticks or screwdrivers into the end of the power cable while it is plugged in.

Due to its size and weight, please follow these guidelines to safely lift and move your LG OLED77G7V-Z:

• It is recommended to move the TV in the original box or packing material.

• Before moving or lifting, disconnect the power cord and all other cables.

• When transporting a large TV like the LG OLED77G7V-Z, there should be at least two people.

• When holding the TV, the screen should face away from you to avoid damage. Avoid touching the screen at all times.

• Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grill area.

• Keep the TV upright during transport. Never turn the TV on its side or tilt it towards the left or right.

• Do not expose the TV to jolts or excessive vibration.

• Do not apply excessive pressure that could cause the frame chassis to flex or bend, as this may damage the screen.

• Be careful not to damage the protruding buttons when handling the TV.

• Before lifting, ensure the AV box fixing supporter is attached to the AV box to prevent injury to your fingers.

You can operate the basic functions of your LG OLED77G7V-Z using the physical button on the unit. Here’s how:

Basic Functions:

• **Power On:** A short press of the button turns the TV on.

• **Power Off:** Press and hold the button to turn the TV off. This will close all running apps.

Adjusting the Menu:

When the TV is on, a single short press of the button will bring up a control menu. You can then use the button to navigate and select menu items:

• **Turns the power off.**

• **Clears on-screen displays** and returns to TV viewing.

• **Changes the input source.**

• **Accesses the settings menu.**

When placing your LG OLED77G7V-Z on a table or cabinet, follow these steps and precautions:

1. Lift and tilt the TV into its upright position on a stable, flat surface that is strong and large enough to support the TV securely.

2. Ensure there is a minimum of 10 cm (about 4 inches) of space between the back and sides of the TV and the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

Important Precautions:

• Do not place the TV near or on sources of heat, as this may result in fire or other damage.

• Do not apply foreign substances (like oils or lubricants) to the screw parts during assembly, as this may damage the product.

To prevent your LG OLED77G7V-Z from falling, you can secure it to a wall. Please note that brackets, bolts, and ropes are not provided.

1. Insert and tighten eye-bolts or TV brackets and bolts into the designated holes on the back of the TV. If there are already bolts in these positions, remove them first.

2. Mount wall brackets securely to the wall with bolts. The location of the wall brackets should align with the eye-bolts on the rear of the TV.

3. Connect the eye-bolts on the TV and the wall brackets tightly with a sturdy rope. Ensure the rope is kept horizontal with the flat surface.

Warning: Make sure that children do not climb on or hang on the TV.

To wall mount your LG OLED77G7V-Z, it is recommended to use a qualified professional installer. You must use screws and a wall mount bracket that meet the VESA standard. Before installation, you must perform the stand type installation in reverse to fold the AV box and set the selector to WALL TYPE.

The specifications for the OLED77G7* model are:

When installing, attach the provided AV box fixing supporter or Wall mount spacer to the AV box before mounting the product on a wall mount.

To use the Magic Remote with your LG OLED77G7V-Z, you must first pair (register) it with the TV.

How to register the Magic Remote:

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) button on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote:

Press the BACK and HOME buttons at the same time for five seconds to unpair the Magic Remote with your TV.

You can also cancel and re-register the Magic Remote at once by pressing and holding the GUIDE button.

If you cannot control the TV with the remote control, try the following troubleshooting steps:

• Check the remote control sensor on the product and try again.

• Check if there is any obstacle between the product and the remote control.

• Check if the batteries are still working and are properly installed, matching the polarity (+ to +, – to -).

If your LG OLED77G7V-Z has no image display and no sound is produced, please check the following:

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem with the wall outlet by connecting another product to it.

If your LG OLED77G7V-Z turns off suddenly, consider these possibilities:

• Check the power control settings. The power supply may have been interrupted.

• Check if the Sleep Timer or Timer Power Off is activated in the Timers settings.

• Depending on the model, check if Auto Power Off is activated in the General -> Eco Mode settings.

• If there is no input signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.

The sounds you hear from your LG OLED77G7V-Z are likely normal operational noises and not a malfunction.

• **”Cracking” noise:** A cracking sound that occurs when watching or turning off the TV is generated by plastic thermal contraction due to changes in temperature and humidity. This is common for products where thermal deformation is required.

• **Electrical circuit humming/panel buzzing:** A low-level noise is generated from a high-speed switching circuit that supplies a large amount of current to operate the TV. The level of this noise can vary depending on the product.

These generated sounds do not affect the performance or reliability of the product.

The wireless module (LGSBWAC72) specifications for the LG OLED77G7V-Z are as follows:

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Bluetooth

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

The television system specifications for the LG OLED77G7V-Z can vary depending on the country. Here is a general overview:

The following table lists the hexadecimal key codes for controlling your LG OLED77G7V-Z via an external device. Note that functionality may not be available for all models.

To control your LG OLED77G7V-Z externally, you need to connect a control device (like a computer or A/V system) to the TV’s control port. You can use either a USB to Serial converter or a direct RS-232C cable.

Connection:

Connect your control device to the RS-232C IN (CONTROL & SERVICE) port on the TV. Depending on your model and control device, this may be a USB port or a phone jack type port requiring a specific adapter cable.

Set ID Configuration:

You must assign a unique Set ID to the TV:

1. Press SETTINGS on the remote to access the main menus.

2. Use the navigation buttons to scroll to (*General -> About this TV or OPTION) and press OK.

3. Scroll to SET ID and press OK.

4. Scroll left or right to select a Set ID number from 1 to 99, then select CLOSE.

5. Press EXIT when you are finished.

Communication Parameters:

Ensure your control system is configured with the following settings:

• **Baud rate:** 9600 bps (UART)

• **Data length:** 8 bits

• **Parity:** None

• **Stop bit:** 1 bit

• **Communication code:** ASCII code

• **Cable:** Use a crossed (reverse) cable.

The following is a list of commands for controlling your LG OLED77G7V-Z via a serial connection. The data values are in hexadecimal.