LG LDE3017ST (02) PDF Document

To set the clock:

Step 1. Touch the CLOCK pad once to set.

Step 2. Touch the number pad to enter the time. Touch the number pad with the correct time of day. For example, to set 12:34, touch the number pad 1, 2, 3 and 4. If the number pad is not touched within 30 seconds after you touch the CLOCK pad, the display reverts to the original setting. If this happens, touch the CLOCK pad and reenter the time of day.

Step 3. Touch START. This enters the time and starts the clock.

To check the time of day when the display is showing other information, simply touch the CLOCK pad.

To change the hour mode on the Clock (12HR or 24HR) on the LG LDE3017ST:

Step 1. Touch the SETTING pad 8 times. Display will change into CLO.

Step 2. Touch the number 1 pad for 12-hour, 2 pad for 24-hour.

Step 3. Touch the START pad to accept the desired change.

If a flashing time is in the display on the LG LDE3017ST, you have experienced a power failure. Reset the clock. Touch the CLOCK pad once to reset. Enter the correct time of day by touching the appropriate number pads. Touch the START pad.

The minimum and maximum default settings for Clock Time on the LG LDE3017ST are:

To set the Timer (example to set 5 minutes) on the LG LDE3017ST:

Step 1. Touch UPPER or LOWER TIMER ON/OFF twice. 0:00 and HR inside will appear and TIMER will flash in the display.

Step 2. Touch 5 in the number pad. You can see 0:05 in the display.

Step 3. Touch TIMER to start the Timer. The time will count down with 5:00 and the time will show in the display.

Step 4. When the set time has run out, End will show in the display. The indicator tones will sound every 15 seconds until UPPER or LOWER TIMER ON/OFF is touched.

Note: If you touch UPPER or LOWER TIMER ON/OFF once, it allows you to set the time in seconds (e.g., if you touch 50, it means 50 seconds). If you touch UPPER or LOWER TIMER ON/OFF twice, it allows you to set the time in minutes (e.g., if you touch 5, it means 5 minutes).

To cancel the Timer before the set time has run out on the LG LDE3017ST:

Touch UPPER TIMER ON/OFF or LOWER TIMER ON/OFF once. The display will return to the time of day.

The minimum and maximum default settings for the Kitchen Timer on the LG LDE3017ST are:

To set convection auto conversion function (For the Lower oven only) on the LG LDE3017ST:

Step 1. Touch the SETTING pad once. “AUTO” will appear in the display.

Step 2. Touch the # 1 pad to ENABLE or touch the # 2 pad to DISABLE.

Step 3. Touch the START pad to accept the change.

To Adjust the Oven Temperature (For the Lower oven only) on the LG LDE3017ST:

Step 1. Touch SETTING pad 2 times for the lower oven, “L-AJ” will appear in the display.

Step 2. Using the number pad enter the temperature correction you wish to adjust. Example: to adjust the oven temperature UP 15 degrees, touch 15.

Step 3. Touch START pad to accept the change.

Step 4. To lower the oven temperature enter 15 then touch SETTING pad to DECREASE the temperature, (for – value).

Step 5. Touch START pad to accept the change.

To adjust the oven thermostat (For both the Upper & Lower ovens) on the LG LDE3017ST:

For the Upper oven only:

Step 1. Touch SETTING pad 3 times for the upper oven, “U-AJ” will appear in the display.

Step 2. Using the number pad enter the temperature correction you wish to adjust. Example: to adjust the oven temperature UP 15 degrees, touch 15.

Step 3. Touch START pad to accept the change.

Step 4. To lower the oven temperature enter 15 then touch SETTING pad to DECREASE the temperature, (for – value).

Step 5. Touch START pad to accept the change.

Note: The thermostat adjustment for Bake will also affect Convection Bake or Convection Roast.

To select language on the LG LDE3017ST:

Step 1. Touch the SETTING pad 4 times, “Lng” will appear in the display.

Step 2. Touch the # 1 pad for English, touch the # 2 pad for Spanish, touch the # 3 pad for French.

Step 3. Touch the START pad to accept the change.

To select fahrenheit or celsius temperature on the LG LDE3017ST:

Step 1. Touch the SETTING pad 7 times and “UNIT” will appear in the display.

Step 2. Touch the # 1 pad for F (Fahrenheit) or touch the # 2 pad for C (Celsius).

Step 3. Touch the START pad to accept the change.

To set preheating alarm light ON/OFF on the LG LDE3017ST:

Step 1. Touch the SETTING pad 5 times. “Pre” will appear in the display.

Step 2. Touch the # 1 pad for ON or touch the # 2 pad for OFF.

Step 3. Touch the START pad to accept the change.

To adjust beeper volume on the LG LDE3017ST:

Step 1. Touch the SETTING pad 6 times and “BEEP” will appear in the display.

Step 2. Touch the # 1 pad for LOUD, touch the # 2 pad for NORMAL, touch the # 3 pad for LOW, and touch the # 4 pad for MUTE.

Step 3. Touch the START pad to accept the change.

To remove racks from the LG LDE3017ST:

Step 1. Pull the rack straight out until it stops.

Step 2. Lift up the front of the rack and pull it out.

To replace racks in the LG LDE3017ST:

Step 1. Place the end of the rack on the support.

Step 2. Tilt the front end up and push the rack in.

Note: In order to remove or replace racks properly, follow the orders recommended in below.

To set the oven to BAKE and temperature to 375°F on the LG LDE3017ST:

Step 1. Touch UPPER or LOWER BAKE.

Step 2. Set the oven temperature (Touch 3, 7 and 5).

Step 3. Touch START.

The word PREHEATING and 100° will be displayed. As the oven preheats the temperature is displayed in 5 degree increments. Once the oven reaches the desired temperature, a tone will sound and the oven light will flash on and off.

Place the food in the oven after preheating. Preheating is necessary for better cooking results.

When cooking is finished, touch UPPER or LOWER CLEAR OFF.

Remove food from the oven.

To change the Bake Temperature while cooking on the LG LDE3017ST (example changing from 375°F to 425°F):

Step 1. Touch UPPER or LOWER BAKE.

Step 2. Set the oven temperature (Touch 4, 2 and 5).

Step 3. Touch START.