LG KT-T430 (02) PDF MANUAL

LG KT-T430 (02) PDF SUMMARY:

How do I assemble the product?

1. Place a soft cloth on the table and place the Multi-touch Overlay Kit over it.
2. Remove the internal protective film using the handle at the upper right corner of the glass.
3. Place the display product on the Multi-touch Overlay Kit.
4. Use the screws and the top bracket provided to make the product stationary.
   • Number of screws to attach the top bracket:
     • KT-T320: 3 screws
     • KT-T430/ KT-P430/ KT-T490/ KT-T550: 4 screws
5. Use the screws to attach the product to the bottom bracket provided.
6. Use the screws to attach the product to the side brackets provided.
7. Remove the external protective film using the handle at the upper right corner of the glass.

---

What are the safety precautions?

• The product should be installed by a qualified professional specified by the retail store.
  • Product installation by non-qualified personnel is very dangerous and may cause personal injury.
• When moving or replacing the product after installation, contact a qualified installer specified by the retail store.
  • Installation or movement of the product must be carried out by a skilled professional. If an unqualified person moves or installs the product, it may cause safety risks.
• Do not hang the power cable and signal cable on the back of the monitor when mounting the monitor to the wall.
  • Damaged cables may result in fire, electric shock, or damage to the product.
  • Keep the monitor upright when mounting the monitor to the wall.
• The product should be installed where its weight can be fully supported.
  • If the product is installed on a weak surface, the product may fall, causing injury.
  • Check the maximum allowed weight of the wall mount (LSW230B : 40 kg, LSW350B : 50 kg).
• Do not hang on this product. Protect it from severe impact after installation.
  • The product may fall and cause injury.
• Models with the Multi-touch Overlay Kit cannot be installed on stands.
  • The product may fall.

---

What should I do before installing the product?

• Before installing the product, if there are any water drops or foreign materials on the inner/outer side of the glass, wipe them out with a soft cloth.
• While using the product, if there are any water drops or foreign materials on the inner/outer side of the glass, wipe them out with a soft cloth and install it again.
• Assemble the product in a clean, uncontaminated area to prevent dust or foreign material from entering it.

---

How do I attach the IR?

1. Remove the IR sensor from the set.
2. Attach the IR sensor to the IR bracket.
3. Attach the IR sensor and the IR bracket to the set.

---

How do I connect the touch USB cable?

Connect the touch USB cable extending from the side of the product to the PC.

---

What are the cautions for connecting the touch USB cable?

• The product may not work if you use a USB extension cable.
• While connecting a USB cable or within 3 seconds after connecting it, any tapping on the touch screen may cause a malfunction.

---

How do I connect the TOUCH USB cable on the side of the product to the USB port on the back of the monitor?

Connect the TOUCH USB cable on the side of the product to the USB port on the back of the monitor.

---

What are the cautions for connecting the TOUCH USB cable on the side of the product to the USB port on the back of the monitor?

• It may not be supported depending on the model.
• The image may be different according to the model.
• If there is a change in installation environment (lights etc.), please remove and reconnect the TOUCH USB cable.

---

What should I do before using the product?

Set the picture mode of the monitor to the Game mode. For more information on setting the mode, see the owner’s manual of the monitor.

---

What are the touch specifications?

Specification	Value
Multi-touch	10 points
Touch input method	Pens, fingers, gloves, etc.
Touch response time	9 ms (1 point) to 15 ms (10 points)
Touch accuracy	1 mm
Operating voltage	4.65 V to 5.25 V
Power consumption	Max. 1.31 W
Rated Voltage	5 V 0.3 A
Supported Operating Systems	Windows 7, Windows 8, Windows 8.1, Android, Linux, Mac OSX

---

What is the OS support availability?

Functions	Mouse/ 1 Point Digitizer	Gestures/ 10 Points	Plug and Play
Click, Drag, Double-Click	O	O	O
Mouse Functions, Right-Click, Flicks, Panning with Inertia	O	O	O
Mouse & Digitizer Functions, Press & Tap, Rotate, Zoom In/Out	O	O	O

OS	Mouse/ 1 Point Digitizer	Gestures/ 10 Points	Plug and Play
Windows 10	O	O	O
Windows 8.1	O	O	O
Windows 8	O	O	O
Windows 7 & Embedded	O	O	O
Mac OSX	O	O	O
Linux	O	O	O
Android	O	O	O

---

What are the notes about OS support availability?

• Windows 2000 and earlier versions of Windows are not supported.
• The correct driver must be installed.
• Operating system applications other than Windows 8 and Windows 7 Professional applications may not support multi-touch.
• For Android or Linux-powered equipment (set-top boxes etc.), the touch feature may not work properly.
• Windows 7 Service Pack must be installed.

---

What is the troubleshooting guide?

Touch does not work at all.

• Check the USB cable connection.
  • This may occur when the USB cable between PC and monitor is not connected. Check the USB cable and reconnect it.
• Check your PC’s power.
  • This may occur when the PC is powered off. Make sure that your PC’s power cord is firmly plugged into a power outlet, then restart your PC.
• Restart your PC.
  • Touch may not respond when the system is down due to an unstable network.
• Check the signal cable connection.
  • If your PC and monitor are not connected with a signal cable, touch will not work. Check the signal cable connection.

---

The touch location does not match the touch coordinates.

• Use the calibration program supported by your OS or application to make any corrections.

---

When using multiple monitors, touching is applied to a monitor other than the one intended.

• Set the product as the default monitor.

---

10 point multi-touch is not working.

• Ensure that your OS supports multi-touch functionality.
• Make sure your content supports 10 point multi-touch.
  • The software used (e.g., Flash Player, Paint, etc.) may not support 10 point multi-touch.
• Restart the software (e.g. Flash Player, Paint, etc.).
• Restart your PC.

---

What are the general cautions regarding the touch screen?

• If the gap between two touch points is 25 mm or less, touch errors may occur.
• 10 point multi-touch support may be unstable on the edge of the touch screen.
• Using the 10 point multi-touch screen to draw lines may cause partial breakage of the lines.

---

Where are the model and serial numbers of the SET located?

The model and serial numbers of the SET are located on the back or one side of the SET. Record it below should you ever need service.

---

What is the warning for the product?

This is a class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.