LG 75NANO85 (01) PDF Document

To ensure the safe operation of your LG 75NANO85, please adhere to the following safety instructions:

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

Installation Environments:

• Keep the product away from direct sunlight.

• Avoid areas with high humidity, such as a bathroom.

• Do not place the TV near heat sources like stoves.

• Avoid kitchen counters or humidifiers where it can be exposed to steam or oil.

• Do not expose the TV to rain, wind, or dripping/splashing water.

• Do not place liquid-filled objects like vases on or over the apparatus.

• Keep flammable objects such as gasoline or candles away from the TV, and do not expose it to direct air conditioning.

• Do not install in excessively dusty places to prevent fire, electric shock, malfunction, or product deformation.

Ventilation:

• Install the TV with proper ventilation. Avoid confined spaces like a bookcase.

• Do not install on a carpet or cushion.

• Do not block or cover the ventilation openings with cloth or other materials while the unit is plugged in. Ventilation openings may become hot during long periods of use.

Power Cord:

• Protect the power cord from physical or mechanical abuse (twisting, kinking, pinching, etc.).

• Do not move the TV while the power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Always grasp the plug to unplug the power cord; do not pull on the cord itself.

• Do not connect too many devices to the same AC power outlet.

General Safety:

• The power plug is the disconnecting device and must remain readily accessible in an emergency.

• Do not let children climb or cling to the TV, as it may fall and cause serious injury.

• Never touch the apparatus or antenna during a lightning storm.

• Do not insert metallic or flammable objects into the product.

• Do not use high voltage electrical equipment (e.g., a bug zapper) near the TV.

If any of the following situations occur with your LG 75NANO85, you should unplug the product immediately and contact your local customer service:

• The product has been damaged.

• Water or another substance enters the product (like the AC adapter, power cord, or TV).

• You smell smoke or other unusual odors coming from the TV.

• During lightning storms or when the TV is unused for long periods.

Note: Even if the TV is turned off by the remote or button, the AC power source is still connected to the unit unless it is unplugged.

To prevent scratches or damage and ensure safe transportation, please follow these guidelines when handling your LG 75NANO85:

Preparation:

• It is recommended to move the TV in the original box or packing material.

• Before moving or lifting, disconnect the power cord and all cables.

Lifting:

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grill area.

• For a large TV like the LG 75NANO85, at least two people are required for transport.

• Avoid touching the screen at all times, as this may result in damage.

Transportation:

• When transporting the TV, do not expose it to jolts or excessive vibration.

• Keep the TV upright during transport; never turn it on its side or tilt it left or right.

• Do not apply excessive pressure that could cause the frame chassis to flex or bend, as this may damage the screen.

• Be careful not to damage the protruding buttons when handling the TV.

Follow these steps to mount your LG 75NANO85 on a table:

1. When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

2. Lift and tilt the TV into its upright position on the table.

3. Ensure there is a minimum of 10 cm (4 inches) of space between the TV and the wall for proper ventilation.

4. Connect the power cord to a wall outlet.

To prevent your LG 75NANO85 from overturning, especially if it’s on a stand, you can secure it to a wall. Note that brackets, bolts, and ropes are not provided.

1. Insert and tighten the eye-bolts, or TV brackets and bolts, on the back of the TV. If bolts are already in the eye-bolt position, remove them first.

2. Mount the wall brackets with the bolts to the wall. The location of the wall bracket should match the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Additionally, always take these precautions:

• Use a platform or cabinet that is strong and large enough to support the TV securely.

• Use cabinets or stands recommended by the manufacturer.

• Ensure the television is not overhanging the edge of the supporting furniture.

• Educate children about the dangers of climbing on furniture to reach the TV or its controls.

To wall mount your LG 75NANO85, ensure you use screws and a wall mount bracket that meet the VESA standard. The specifications for your model are as follows:

When mounting, it is recommended to use an LG wall mount bracket and have it performed by a qualified professional installer. Ensure the wall is solid and can support the TV’s weight. Connect all cables before installing a fixed wall mount.

To clean your LG 75NANO85 safely, follow these instructions:

1. Unplug the power cord from the wall outlet.

2. Gently wipe the screen and frame with a soft, dry cloth.

3. Do not spray water or other liquids directly onto the TV.

4. To avoid damage, do not clean your TV with chemicals such as glass cleaner, air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, or alcohol.

5. When cleaning, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left, or right side of the panel and the guide panel.

6. If you must use a damp cloth, make sure to wring any excess water or cleaner from it before wiping the screen.

Antenna/Cable:

• Connect the TV to a wall antenna socket using an RF cable (75 Ω).

HDMI:

• For optimal connection, HDMI cables should have bezels less than 10 mm thick and 18 mm wide.

• Use a certified cable with the HDMI logo attached. An Ultra High Speed HDMI®/™ cable (3 m or less) is recommended.

• When connecting an HDMI cable, the TV and external devices should be turned off and unplugged.

• Supported HDMI Audio formats include: True HD (48 kHz), Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), and PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz).

HDMI Ultra HD Deep Colour Setting:

To enable higher quality 4K signals, you may need to adjust this setting. Navigate to [Picture] → [Additional Settings] → [HDMI Ultra HD Deep Colour]. If the connected device supports it, your picture may be clearer. If the device doesn’t support it, it may not work properly, and you should change the setting to off.

• On: Supports 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0) and 4K @ 100/120 Hz (4:4:4, 4:2:2, 4:2:0) on ports 3 & 4.

• Off: Supports 4K @ 50/60 Hz (4:2:0).

USB:

• For an optimal connection, USB devices should have bezels less than 10 mm thick and 18 mm wide. Use an extension cable that supports USB 2.0 if the USB cable or memory stick does not fit.

• Some USB hubs may not work. If a USB device connected via a hub is not detected, connect it directly to the TV’s USB port.

You can operate basic functions of your LG 75NANO85 using the single button on the TV.

Basic Functions:

• Power On: Press the button.

• Power Off: Press and hold the button. (All running apps will close, and any recording in progress will stop).

• Menu Control: When the TV is on, press the button to access the menu.

• Menu Selection: Press and hold the button to select an option in the menu.

Adjusting the Menu:

When the TV is on, press the button once to bring up the control menu. You can then press the button repeatedly to cycle through the options:

The Magic Remote for your LG 75NANO85 allows for intuitive control. Below are the functions of its buttons. Note that to use a button marked with “**”, you must press and hold it for more than 1 second.

• (POWER): Turns the TV on or off.

• (STB POWER): Turns your connected set-top box on or off.

• Number buttons: Enters numbers.

• 9**: Accesses [Quick Help].

• – (DASH): Inserts a dash between numbers.

• LIST: Accesses the saved programmes list.

• … (MORE ACTIONS): Displays more remote control functions.

• QUICK ACCESS**: Edits QUICK ACCESS, which allows you to enter an app or Live TV by pressing and holding a number button.

• AD/SAP**: Enables the audio descriptions function.

• + / -: Adjusts the volume level.

• (MUTE): Mutes all sounds.

• (MUTE)**: Accesses the [Accessibility] menu.

• ∧ / ∨: Scrolls through saved programmes.

• (Voice recognition): (Network connection required) Press to check for recommended content.

• (Voice recognition)**: Press and hold while speaking to use the voice recognition feature.

• (HOME): Accesses the Home menu.

• (HOME)**: Shows the previous history.

• (Q. Settings): Accesses the Quick Settings.

• (Q. Settings)**: Displays the [All Settings] menu.

• Wheel (OK): Press the center of the wheel to select a menu. You can also change programmes by using this button.

• △▽◁▷ (up/down/left/right): Press the directional buttons to scroll the menu.

• (BACK): Returns to the previous level.

• (BACK)**: Clears on-screen displays and returns to the last input viewed.

• GUIDE: Shows the programme guide.

• Streaming Service buttons: Connects to the specified Video Streaming Service.

• (INPUT): Changes the input source.

• (INPUT)**: Accesses the [Home Dashboard].

• Colored buttons: These access special functions in some menus.

• (Control buttons): Controls media content (e.g., play, pause).

To register the Magic Remote:

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) button.

3. If the TV fails to register the remote, try again after turning the TV off and back on.

To deregister the Magic Remote:

• Press the (BACK) and (HOME) buttons at the same time for five seconds to unpair the Magic Remote with your TV.

• Alternatively, you can press and hold the GUIDE button for more than 5 seconds to disconnect and re-register the Magic Remote at the same time.

If you cannot control your LG 75NANO85 with the remote, try the following steps:

• Check the remote control sensor on the TV and try again.

• Check if there is any obstacle between the TV and the remote control.

• Check if the batteries are still working and are installed correctly, matching the (+) and (-) polarities.

If your LG 75NANO85 is not displaying an image or producing sound, please check the following:

• Confirm that the product is turned on.

• Check if the power cord is securely connected to a wall outlet.

• Test the wall outlet by connecting other products to see if there is a problem with the outlet itself.

If your LG 75NANO85 turns off suddenly, consider these possibilities:

• Check the power control settings, as the power supply may have been interrupted.

• Check if the auto-off function is activated in the settings related to time.

• If there is no input signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.

If there is no signal detected when your PC is connected to the LG 75NANO85 with an HDMI cable, try these troubleshooting steps:

• Turn the TV off and then on again using the remote control.

• Reconnect the HDMI cable on both the TV and the PC.

• Restart the PC with the TV already on.

Certain display characteristics are normal for the advanced panel in your LG 75NANO85 and do not indicate a malfunction:

• “Flicker” on startup: If the product feels cold to the touch, a small “flicker” may be visible when it is turned on. This is normal.

• Pixel characteristics: The panel contains millions of pixels. You may see tiny black dots and/or brightly coloured dots (red, blue, or green) at a size of 1 ppm. This does not affect the performance or reliability of the product and is not subject to exchange or refund.

• Viewing angle: You may notice different brightness and colour depending on your viewing position (left/right/top/down). This phenomenon is due to the characteristics of the panel and is not a malfunction.

• Image Sticking: Displaying a still image for a prolonged period (e.g., a channel logo, on-screen menu, or video game scene) may cause the image to be temporarily retained on the screen. This is known as image sticking. To avoid this, refrain from displaying a fixed image on the TV screen for a long period of time.

The sounds you hear from your LG 75NANO85 are likely normal operational noises and do not affect the product’s performance or reliability.

• “Cracking” noise: This sound occurs when you watch or turn off the TV and is caused by the plastic contracting due to changes in temperature and humidity. This is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing: A low-level noise is generated from a high-speed switching circuit that supplies a large amount of current to operate the product. The sound level can vary depending on the product but is considered normal.

The broadcasting specifications for the LG 75NANO85 vary depending on the country.

¹ Only DVB-T2 support models. (Despite DVB-T2 model, DVB-T/T2 function does not apply in Philippines.)
² Only DVB-T2/C/S2 support models.
³ Depending on model.

The wireless specifications for the LG 75NANO85 using the LGSBWAC92 module are as follows:

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

The recommended environmental conditions for operating your LG 75NANO85 are:

The symbols on your LG 75NANO85 indicate electrical safety and power information.