LG 65UM7610PLB (01) PDF DOCUMENT

Please follow these steps to attach the stand to your LG 65UM7610PLB TV:

1. Lay the TV screen-side down on a soft, flat surface to protect the screen from scratches.

2. Align the stand with the mounting points on the back of the TV.

3. Secure the stand to the TV using the four provided M5 x L30 screws.

To install the batteries, open the battery compartment on the back of the remote control and insert two AA batteries. Ensure that you match the positive (+) and negative (-) ends of the batteries to the markings inside the compartment.

After connecting all necessary cables to your LG 65UM7610PLB, use the provided cable management clips to organize them.

1. Attach the clips to the designated spots on the back of the TV stand.

2. Route the power cord and other connection cables through the clips to keep them neat and tidy.

3. Once the cables are organized, plug the power cord into a wall outlet.

For information regarding the power supply and power consumption of your LG 65UM7610PLB, please refer to the label attached to the product.

Your LG 65UM7610PLB is equipped with the following ports for connecting external devices:

• OPTICAL DIGITAL AUDIO OUT: For connecting to an external audio system with an optical input.

• LAN: For a wired connection to your network/internet.

• USB IN: For connecting USB devices such as flash drives or external hard drives.

• HDMI IN: For connecting high-definition devices like Blu-ray players, game consoles, and computers. One of these ports supports ARC (Audio Return Channel).

• COMPONENT IN: For connecting devices using component video (Y, PB, PR) and left/right audio cables.

• AV IN: For connecting devices using composite video and left/right audio cables.

• Satellite IN: For connecting a satellite dish cable.

• ANTENNA/CABLE IN: For connecting an over-the-air antenna or a direct cable line.

• PCMCIA CARD SLOT: For inserting a Conditional Access Module (CAM).

To register your Magic Remote, press and hold the ‘GUIDE’ button for more than 5 seconds while pointing the remote at the TV.

To turn on your LG 65UM7610PLB, press the power button on the remote control. You can use the Magic Remote to point and click, use the scroll wheel to navigate menus, or press the microphone button to use voice commands.

The power requirement for the LG 65UM7610PLB is AC 100-240 V ~ 50/60 Hz.