LG 65UK6350PUC (01) PDF Document

To ensure safe operation of your LG 65UK6350PUC TV, please adhere to the following instructions:

• Read and keep these instructions.

• Heed all warnings and follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way.

To prevent fire, electric shock, malfunction, or product deformation, do not place the TV and/or remote control in the following environments:

• Keep the product away from direct sunlight.

• An area with high humidity such as a bathroom.

• Near any heat source such as stoves and other devices that produce heat.

• Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.

• An area exposed to rain or wind.

• Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases or cups, on or over the apparatus.

• Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

• Do not install in excessively dusty places.

• To prevent the spread of fire, keep candles or other items with open flames away from this product at all times.

Follow these guidelines for proper ventilation:

• Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase.

• When mounting on a table, leave a minimum of 10 cm (4 inches) of space from the wall for proper ventilation.

• When mounting on a wall, ensure there is enough space (at least 10 cm or 4 inches) to allow connectivity to external devices.

• Do not install the product on a carpet or cushion.

• Do not block or cover the product with cloth or other materials while the unit is plugged in.

• Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

• Do not move the TV whilst the Power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

• The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

When moving or lifting the TV, read the following to prevent it from being scratched or damaged and for safe transportation:

• It is recommended to move the TV in the box or packing material that it originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• Use at least two people to move a large TV.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

• When transporting the TV, do not expose it to jolts or excessive vibration.

• Keep the TV upright; never turn the TV on its side or tilt it towards the left or right.

• When handling the TV, be careful not to damage the protruding buttons.

• Avoid touching the screen at all times, as this may result in damage to the screen.

• Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.

• When cleaning, unplug the power cord and wipe gently with a soft/dry cloth.

• Do not spray water or other liquids directly on the TV.

• Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol, etc., which can damage the product and/or its panel.

• When cleaning, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left, or right side of the panel and the guide panel.

• Make sure to wring any excess water or cleaner from the cloth.

• Make sure to spray just enough water or cleaner onto a dry cloth to wipe the screen.

To wall mount your LG 65UK6350PUC, make sure to use a wall mount bracket that meets the VESA standard. The specifications are as follows:

To prevent the TV from falling over, follow these steps to secure it to a wall:

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. If there are bolts already inserted at the eye-bolts position, remove them first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Note:

• Use a platform or cabinet that is strong and large enough to support the TV securely.

• Brackets, bolts, and ropes are not provided. You can obtain additional accessories from your local dealer.

• Make sure that the screws are fastened tightly. If they are not fastened securely enough, the TV may tilt forward after being installed.

• Do not fasten the screws with excessive force, otherwise they may strip and become loose.

You can operate basic TV functions using the button located on the set. The functions are:

When you access the menu control by pressing the button, you can adjust the following items:

How to register the Magic Remote Control:

To use the Magic Remote, you must first pair it with your TV.

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control:

Press the BACK and HOME buttons at the same time for five seconds to unpair the Magic Remote with your TV.

Pressing and holding the GUIDE button will let you cancel and re-register the Magic Remote at the same time.

If the remote control is not working, try the following steps:

• Check if anything, such as tape, has been placed over the remote sensor on the TV.

• Check if there is any obstacle between the TV and the remote control.

• Replace the batteries with new fresh ones.

If there is no image or sound, please check the following:

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products to it.

If your TV turns off unexpectedly, consider these possibilities:

• Check the power control settings. The power supply may have been interrupted.

• Check if the auto-off function is activated in the settings menu.

• If there is no signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.

These sounds are generally normal and do not indicate a problem with the product’s performance or reliability.

• Cracking noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing: A low-level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate the product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

The specifications for the LG 65UK6350PUC are as follows:

Broadcasting Specifications

Wireless module (LGSBWAC72) Specifications

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and the body.

Proper television placement is crucial for child safety. Many injuries, particularly to children, can be avoided by taking simple precautions.

General Safety:

• Always follow the manufacturer’s recommendations for safe installation.

• Never allow children to climb on or play on the television or the furniture on which it is placed.

• Never place the television on furniture that can be used as steps, like a chest of drawers.

• Always install the television where it cannot be pushed, pulled over, or knocked down.

• Always route cords and cables so they cannot be tripped over, pulled, or grabbed.

Using Furniture:

• Use cabinets or stands recommended by the manufacturer.

• Only use furniture that can safely support the television set.

• Ensure the television is not overhanging the edge of the supporting furniture.

• Do not place the television on cloth or other materials that may be between the television and supporting furniture.

Wall or Ceiling Mounting:

• Contact a professional for installation if you have any doubts about your ability to safely mount your television.

• Always use a mount that has been recommended by the television manufacturer and has a safety certification by an independent laboratory (such as UL, CSA, ETL).

• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.

To control your TV via the RS-232C port, use the following communication parameters:

• Baud rate: 9600 bps (UART)

• Data length: 8 bits

• Parity: None

• Stop bit: 1 bit

• Communication code: ASCII code

• Cable: Use a crossed (reverse) cable.

The transmission protocol for sending commands is as follows:

[Command1][Command2][ ][Set ID][ ][Data][Cr]

• [Command 1]: First command to control the TV (j, k, m or x).

• [Command 2]: Second command to control the TV.

• [Set ID]: The monitor ID number, adjustable from 1 to 99 in the option menu. If the Set ID is ‘0’, every connected set can be controlled. The Set ID is indicated as decimal (1-99) on the menu and as Hexadecimal (0x00 to 0x63) in the protocol.

• [Data]: The command data to be transmitted (in hexadecimal). Transmit ‘FF’ to read the status of a command.

• [Cr]: Carriage Return – ASCII code ‘0x0D’.

• [ ]: Space – ASCII code ‘0x20’.

OK Acknowledgement:

The TV will respond with the following format upon receiving normal data:

[Command2][ ][Set ID][ ][OK][Data][x]

Error Acknowledgement:

The TV will respond with the following format upon receiving abnormal data or for non-viable functions:

[Command2][ ][Set ID][ ][NG][Data][x]