LG 65NANO959NA (01) PDF DOCUMENT

When handling the TV, it is important to follow these precautions to avoid damaging the screen:

• Do not touch the screen directly with your hands or fingers.

• Avoid pressing, rubbing, or scratching the screen surface.

• Always hold the TV by its sides or frame (bezel).

The package contains the following items:

• Remote control and batteries

• Power cord

• 4 screws (M4 x L20)

• Stand components

• Cable management clip

Note: Items included may vary depending on the model.

Please follow these steps for unboxing and assembly. It is recommended that two people perform this process.

1. Place the box upright and open it from the top. Remove the top styrofoam and accessories.

2. Lay a soft cloth or the provided protective sheet on a flat, stable surface to prevent scratches to the screen.

3. With two people, carefully lift the TV from the box and place it face down on the protected surface.

4. Align the stand with the mounting holes on the back of the TV.

5. Secure the stand to the TV using the four provided screws (M4 x L20).

6. With two people, carefully lift the TV to an upright position and place it on a sturdy table or stand.

7. Connect the power cord to the back of the TV.

8. Organize the cables using the provided cable management clip on the back of the stand.

Your TV is equipped with various ports to connect external devices. The availability of ports may vary depending on the model.

• **HDMI IN:** For connecting devices like Blu-ray players, game consoles, and set-top boxes. One port supports eARC/ARC for audio systems.

• **USB IN:** For connecting USB storage devices.

• **OPTICAL DIGITAL AUDIO OUT:** For connecting to an external audio system with an optical cable.

• **LAN:** For a wired connection to your internet network.

• **ANTENNA/CABLE IN:** For connecting an antenna or a cable service.

• **Satellite IN (Main/Sub):** For connecting a satellite dish.

• **AV IN / COMPONENT IN:** For connecting devices using AV (composite) or component cables. These may share ports.

• **AUDIO OUT / H/P OUT:** For connecting headphones or an analog audio system.

• **IR Blaster:** For connecting an IR blaster.

• **PCMCIA CARD SLOT:** For a Conditional Access Module (CAM).

First, open the battery cover on the back of the remote control and insert the batteries, making sure to match the positive (+) and negative (-) ends correctly.

To turn the TV on, you can press the power button on the remote control. Alternatively, you can press the power button located on the TV itself. A short press (1 second) turns the power on. A long press (about 5 seconds) while the TV is on will turn it off and display a menu.

The specifications for the 65-inch models are as follows:

Power requirement: AC 100-240 V~50/60 Hz

Before using the product, please read the “Safety and Regulatory” manual.